Category: Engineering Control
Sweating the Small Stuff: 20 years of NIOSH Research on Engineering Controls for Nanotechnology
Engineered nanomaterials are intentionally produced substances that have at least one primary dimension less than 100 nanometers (nm). Nanomaterials may have properties different from those of larger particles of the same material, making them unique and desirable for specific product applications (e.g., cosmetics, electronics, construction materials). The health effects associated with nanomaterials are not yet Read More >
Posted on by Leave a commentThe Effectiveness of DIY Air Filtration Units
Portable air filtration units, or air cleaners, remove airborne particles (called aerosols) from the air indoors. Air filtration units were widely used during large wildfire outbreaks in the western United States,[1] and their use surged nationwide during the COVID-19 pandemic as a way to reduce exposure to aerosols containing the SARS-CoV-2 virus. Homemade or Read More >
Posted on by 12 CommentsNIOSH Ventilated Headboard Provides Solution to Patient Isolation During an Epidemic
To protect healthcare workers, other patients, and visitors from exposure to airborne infectious diseases, patients in hospital settings sometimes need to be placed in airborne infection isolation rooms (AIIRs). AIIRs contain specific engineered features to isolate and more-quickly remove potentially infectious patient aerosols so that they do not infect others. Isolation rooms are expensive, costing Read More >
Posted on by 20 CommentsNational Engineers Week
This week is National Engineers Week which is dedicated to ensuring a diverse and well-educated future engineering workforce by increasing understanding of and interest in engineering and technology careers. The National Institute for Occupational Safety and Health (NIOSH) employs over 200 engineers and engineering technicians who identify, evaluate, develop, and implement engineering control technology to Read More >
Posted on by 5 CommentsCharacterizing 3D Printing Emissions and Controls in an Office Environment
Disclaimer: Mention of any company, product, or service does not constitute endorsement by the National Institute for Occupational Safety and Health (NIOSH), the Centers for Disease Control and Prevention (CDC), or the U.S. Department of Health and Human Services (HHS), or imply that any company or its products or services are preferred over any other. Read More >
Posted on by 28 CommentsNIOSH’s Engineering Controls Database
The hierarchy of controls shows us that engineering controls can protect workers by eliminating or reducing hazardous conditions to acceptable exposure levels. The idea behind the hierarchy is that the control methods at the top of the graphic are potentially more effective and protective than those at the bottom. Following the hierarchy of controls can Read More >
Posted on by 12 CommentsPreventing Wood Chipper Fatalities
Last week, a 19-year-old North Carolina teen was killed after being pulled feet first into a wood chipper (see news report). It was his first day on the job. Self-feeding mobile wood chippers commonly used during tree trimming operations consist of a feed mechanism, knives mounted on a rotating chipper disc or drum, and Read More >
Posted on by 13 CommentsThe Silica/Asphalt Milling Machine Partnership – All Good Things Need Not Come to an End
A recent ceremony at World of Asphalt 2015 celebrated the success of the Silica/Asphalt Milling Machine Partnership’s accomplishments to develop and validate engineering controls for silica dust in asphalt milling operations. The partnership between government, industry, labor was coordinated by the National Asphalt Pavement Association over the past decade to design, test, and implement engineering Read More >
Posted on by 4 CommentsThanksgiving Ergonomics: Reducing material handling injuries with engineering controls
![](https://blogs.cdc.gov/niosh-science-blog/wp-content/uploads/sites/22/2014/11/grocery3-160x80.png)
If you haven’t purchased your 20 pound Thanksgiving turkey or your 10 pound bag of potatoes rest assured employees at your local grocery stores are busy restocking the shelves each day with your favorite Thanksgiving foods. It‘s hard enough lifting those items into your cart but what about the workers who haul those tons Read More >
Posted on by 23 CommentsBuy Quiet Update
Several years ago NIOSH started the planning process for a “buy quiet” initiative to encourage companies to purchase or rent quieter machinery and tools to reduce worker noise exposure. This initiative also aimed to provide information on equipment noise levels and promote manufacturers to design quieter equipment. NIOSH is now pleased to announce the official Read More >
Posted on by 12 CommentsControlling Exposures to Workers Who Make or Use Nanomaterials
Background It is difficult to estimate how many workers are involved in this field. By one estimate, there are 400,000 workers worldwide in the field of nanotechnology, with an estimated 150,000 of those in the United States [Roco et al. 2010]. The National Science Foundation has estimated that approximately 6 million workers will be Read More >
Posted on by 5 CommentsPreventing Deaths in Manure Storage Facilities Through Proper Ventilation
On farms, manure storage facilities are used to store animal waste, which can then be used for fertilizer. Farmers or farm workers may need to enter the facilities to repair or maintain equipment, such as pumps and intake hoses. These confined spaces are often oxygen-deficient atmospheres and can contain toxic and/or explosive gases that create Read More >
Posted on by 8 CommentsCost-effective Rollover Protective Structure (CROPS)
Despite a decades-long effort to raise awareness about the importance of roll over protective structures (ROPS) in preventing injury and death from tractor roll overs, tractor overturns continue to be the leading cause of occupational agricultural death in the United States. While all tractors produced since 1986 come with ROPS as standard equipment, farm tractors Read More >
Posted on by 15 CommentsDangers of Bathtub Refinishing
On April 30, 2024, the EPA finalized a ban on most uses of methylene chloride, protecting workers and communities from fatal exposure. The rule requires stronger worker safety requirements for remaining industrial uses. Information on the ban can be found here. At least 14 workers have died since 2000 as a result of Read More >
Posted on by 179 CommentsWorker Exposure to Crystalline Silica During Hydraulic Fracturing
Hydraulic fracturing or “fracking” is the process of injecting large volumes of water, sand, and chemicals into the ground at high pressure to break up shale formation allowing more efficient recovery of oil and gas. This form of well stimulation has been used since the late 1940s, but has increased substantially over the last 10 Read More >
Posted on by 27 CommentsBuy Quiet
Quieter tools and machines lead to decreased hearing loss among the workers who use them. So why aren't companies "buying quiet"? Read more about the challenges in this area and what NIOSH is doing to make it easier to "buy quiet." Read More >
Posted on by 26 CommentsPrevention through Design Standard
A new ANSI/ASSE Prevention through Design standard provides guidance on how to avoid, eliminate, reduce and control occupational safety and health hazards in the design and redesign process. Read More >
Posted on by 20 CommentsNail Salon Table Evaluation
NIOSH is requesting that developers, manufacturers, and vendors of vented nail tables (VNTs) submit new, unused, downdraft VNTs for a free evaluation. The NIOSH research will include an evaluation of VNT airflow and capture characteristics, noise level, ergonomic features, and filter life. Results of the research and recommendations from NIOSH will be communicated back to the submitter with the hope of providing valuable information for maximizing the efficiency of VNTs. Read More >
Posted on by 26 CommentsNO2 Emission Increases Associated with the Use of Certain Diesel Particulate Filters in Underground Mines
Emissions of and exposure to diesel particulate matter can sometimes be controlled through use of newer diesel engines, better engine maintenance, alternative fuels, or ventilation upgrades. Some mines may need to use diesel particulate filters, however. This has created concern about potential exposure to nitrogen dioxide (NO2) resulting from their use. Read More >
Posted on by 108 CommentsDiacetyl and Food Flavorings
Commercial flavorings used in the food service industry are often complex mixtures of flavoring chemicals, many of which are volatile, meaning that they evaporate into the air from their liquid or solid form. Diacetyl is a prominent chemical ingredient in butter flavorings and is a component of the vapors coming from these and other flavorings. Inhalation of butter flavoring chemical mixtures, including diacetyl, has been associated with severe obstructive lung disease popularly know as "popcorn lung." Read More >
Posted on by 35 Comments