Service-specific NGINX settings
Enable HTTPS
Change the default proxy headers
Configure GitLab trusted proxies and NGINX real_ip module
Configure the PROXY protocol
Use a non-bundled web server
NGINX configuration options

NGINX settings

Tier: Free, Premium, Ultimate Offering: Self-managed

This page provides configuration information for administrators and DevOps engineers configuring NGINX for GitLab installations. It includes essential instructions for optimizing performance and security specific to bundled NGINX (Linux package), Helm charts, or custom setups.

Service-specific NGINX settings

To configure NGINX settings for different services, edit the gitlab.rb file.

Incorrect or incompatible configuration might cause the service to become unavailable.

Use nginx['<setting>'] keys to configure settings for the GitLab Rails application. GitLab provides similar keys for other services like pages_nginx, mattermost_nginx, and registry_nginx. Configurations for nginx are also available for these <service_nginx> settings, and share the same default values as GitLab NGINX.

To operate NGINX for isolated services like Mattermost, use gitlab_rails['enable'] = false instead of nginx['enable'] = false. For more information, see Running GitLab Mattermost on its own server.

When you modify the gitlab.rb file, configure NGINX settings for each service separately. Settings specified using nginx['foo'] are not replicated to service-specific NGINX configurations (such as registry_nginx['foo'] or mattermost_nginx['foo']). For example, to configure HTTP to HTTPS redirection for GitLab, Mattermost and Registry, add the following settings to gitlab.rb:

nginx['redirect_http_to_https'] = true
registry_nginx['redirect_http_to_https'] = true
mattermost_nginx['redirect_http_to_https'] = true

Enable HTTPS

By default, Linux package installations do not use HTTPS. To enable HTTPS for gitlab.example.com:

If you use a proxy, load balancer, or other external device to terminate SSL for the GitLab host name, see External, proxy, and load balancer SSL termination.

Change the default proxy headers

By default, when you specify external_url, a Linux package installation sets NGINX proxy headers that are suitable for most environments.

For example, if you specify the https schema in the external_url, a Linux package installation sets:

"X-Forwarded-Proto" => "https",
"X-Forwarded-Ssl" => "on"

If your GitLab instance is in a more complex setup, such as behind a reverse proxy, you might need to adjust the proxy headers to avoid errors like:

The change you wanted was rejected
Can't verify CSRF token authenticity Completed 422 Unprocessable

To override the default headers:

Edit /etc/gitlab/gitlab.rb:

  nginx['proxy_set_headers'] = {
    "X-Forwarded-Proto" => "http",
    "CUSTOM_HEADER" => "VALUE"
  }

Save the file and reconfigure GitLab for the changes to take effect.

You can specify any header supported by NGINX.

Configure GitLab trusted proxies and NGINX `real_ip` module

By default, NGINX and GitLab log the IP address of the connected client.

If GitLab is behind a reverse proxy, you might not want the IP address of the proxy to show as the client address.

To configure NGINX to use a different address, add your reverse proxy to the real_ip_trusted_addresses list:

# Each address is added to the NGINX config as 'set_real_ip_from <address>;'
nginx['real_ip_trusted_addresses'] = [ '192.168.1.0/24', '192.168.2.1', '2001:0db8::/32' ]
# Other real_ip config options
nginx['real_ip_header'] = 'X-Forwarded-For'
nginx['real_ip_recursive'] = 'on'

For a description of these options, see the NGINX realip module documentation.

By default, Linux package installations use the IP addresses in real_ip_trusted_addresses as GitLab trusted proxies. The trusted proxy configuration prevents users from being listed as signed in from those IP addresses.

Save the file and reconfigure GitLab for the changes to take effect.

Configure the PROXY protocol

To use a proxy like HAProxy in front of GitLab with the PROXY protocol:

Edit /etc/gitlab/gitlab.rb:

# Enable termination of ProxyProtocol by NGINX
nginx['proxy_protocol'] = true
# Configure trusted upstream proxies. Required if `proxy_protocol` is enabled.
nginx['real_ip_trusted_addresses'] = [ "127.0.0.0/8", "IP_OF_THE_PROXY/32"]

Save the file and reconfigure GitLab for the changes to take effect.

After you enable this setting, NGINX only accepts PROXY protocol traffic on these listeners. Adjust any other environments you might have, such as monitoring checks.

Use a non-bundled web server

By default, the Linux package installs GitLab with bundled NGINX. Linux package installations allow web server access through the gitlab-www user, which resides in the group with the same name. To allow an external web server access to GitLab, add the external web server user to the gitlab-www group.

To use another web server like Apache or an existing NGINX installation:

Disable bundled NGINX:
In /etc/gitlab/gitlab.rb set:
```
nginx['enable'] = false
```
Set the username of the non-bundled web server user:
Linux package installations have no default setting for the external web server user. You must specify it in the configuration. For example:
- Debian/Ubuntu: The default user is www-data for both Apache and NGINX.
- RHEL/CentOS: The NGINX user is nginx.
Install Apache or NGINX before continuing, so the web server user is created. Otherwise, the Linux package installation fails during reconfiguration.
If the web server user is www-data, in /etc/gitlab/gitlab.rb set:
```
web_server['external_users'] = ['www-data']
```
This setting is an array, so you can specify multiple users to add to the gitlab-www group.
Run sudo gitlab-ctl reconfigure for the change to take effect.
If you use SELinux and your web server runs under a restricted SELinux profile, you might need to loosen the restrictions on your web server.
Ensure the web server user has the correct permissions on all directories used by the external web server. Otherwise, you might receive failed (XX: Permission denied) while reading upstream errors.
Add the non-bundled web server to the list of trusted proxies:
Linux package installations usually default the list of trusted proxies to the configuration in the real_ip module for the bundled NGINX.
For non-bundled web servers, configure the list directly. Include the IP address of your web server if it is not on the same machine as GitLab. Otherwise, users appear to be signed in from your web server’s IP address.
```
gitlab_rails['trusted_proxies'] = [ '192.168.1.0/24', '192.168.2.1', '2001:0db8::/32' ]
```
Optional. If you use Apache, set GitLab Workhorse settings:
Apache cannot connect to a UNIX socket and must connect to a TCP port. To allow GitLab Workhorse to listen on TCP (by default port 8181), edit /etc/gitlab/gitlab.rb:
```
gitlab_workhorse['listen_network'] = "tcp"
gitlab_workhorse['listen_addr'] = "127.0.0.1:8181"
```
Run sudo gitlab-ctl reconfigure for the change to take effect.
Download the correct web server configuration:
Go to the GitLab repository and download the required configuration. Select the correct configuration file for serving GitLab with or without SSL. You might need to change:
- The value of YOUR_SERVER_FQDN to your FQDN.
- If you use SSL, the location of your SSL keys.
- The location of your log files.

NGINX configuration options

GitLab provides various configuration options to customize NGINX behavior for your specific needs. Use these reference items to fine-tune your NGINX setup and optimize GitLab performance and security.

Set the NGINX listen addresses

By default, NGINX accepts incoming connections on all local IPv4 addresses.

To change the list of addresses:

Edit /etc/gitlab/gitlab.rb:

# Listen on all IPv4 and IPv6 addresses
nginx['listen_addresses'] = ["0.0.0.0", "[::]"]
registry_nginx['listen_addresses'] = ['*', '[::]']
mattermost_nginx['listen_addresses'] = ['*', '[::]']
pages_nginx['listen_addresses'] = ['*', '[::]']

Save the file and reconfigure GitLab for the changes to take effect.

Set the NGINX listen port

By default, NGINX listens on the port specified in external_url or uses the standard port (80 for HTTP, 443 for HTTPS). If you run GitLab behind a reverse proxy, you might want to override the listen port.

To change the listen port:

Edit /etc/gitlab/gitlab.rb. For example, to use port 8081:
```
nginx['listen_port'] = 8081
```
Save the file and reconfigure GitLab for the changes to take effect.

Change the verbosity level of NGINX logs

By default, NGINX logs at the error verbosity level.

To change the log level:

Edit /etc/gitlab/gitlab.rb:
```
nginx['error_log_level'] = "debug"
```
Save the file and reconfigure GitLab for the changes to take effect.

For valid log level values, see the NGINX documentation.

Set the Referrer-Policy header

By default, GitLab sets the Referrer-Policy header to strict-origin-when-cross-origin on all responses. This setting makes the client:

Send the full URL as referrer for same-origin requests.
Send only the origin for cross-origin requests.

To change this header:

Edit /etc/gitlab/gitlab.rb:
```
nginx['referrer_policy'] = 'same-origin'
```
To disable this header and use the client’s default setting:
```
nginx['referrer_policy'] = false
```
Save the file and reconfigure GitLab for the changes to take effect.

Setting this to origin or no-referrer breaks GitLab features that require the full referrer URL.

For more information, see the Referrer Policy specification.

Disable Gzip compression

By default, GitLab enables Gzip compression for text data over 10240 bytes. To disable Gzip compression:

Edit /etc/gitlab/gitlab.rb:
```
nginx['gzip_enabled'] = false
```
Save the file and reconfigure GitLab for the changes to take effect.

The gzip setting applies only to the main GitLab application, not to other services.

Disable proxy request buffering

To disable request buffering for specific locations:

Edit /etc/gitlab/gitlab.rb:

nginx['request_buffering_off_path_regex'] = "/api/v\\d/jobs/\\d+/artifacts$|/import/gitlab_project$|\\.git/git-receive-pack$|\\.git/ssh-receive-pack$|\\.git/ssh-upload-pack$|\\.git/gitlab-lfs/objects|\\.git/info/lfs/objects/batch$"

Save the file and reconfigure GitLab for the changes to take effect.
Reload NGINX configuration gracefully:
```
sudo gitlab-ctl hup nginx
```

For more information about the hup command, see the NGINX documentation.

Configure `robots.txt`

To configure a custom robots.txt file for your instance:

Create your custom robots.txt file and note its path.
Edit /etc/gitlab/gitlab.rb:
```
nginx['custom_gitlab_server_config'] = "\nlocation =/robots.txt { alias /path/to/custom/robots.txt; }\n"
```
Replace /path/to/custom/robots.txt with the actual path to your custom robots.txt file.
Save the file and reconfigure GitLab for the changes to take effect.

This configuration adds a custom NGINX setting to serve your custom robots.txt file.

Insert custom NGINX settings into the GitLab server block

To add custom settings to the NGINX server block for GitLab:

Edit /etc/gitlab/gitlab.rb:

# Example: block raw file downloads from a specific repository
nginx['custom_gitlab_server_config'] = "location ^~ /foo-namespace/bar-project/raw/ {\n deny all;\n}\n"

Save the file and reconfigure GitLab for the changes to take effect.

This inserts the defined string at the end of the server block in /var/opt/gitlab/nginx/conf/gitlab-http.conf.

Custom settings might conflict with settings defined elsewhere in your gitlab.rb file.

Notes

If you’re adding a new location, you might need to include:
```
proxy_cache off;
proxy_http_version 1.1;
proxy_pass http://gitlab-workhorse;
```
Without these, any sub-location might return a 404 error.
You cannot add the root / location or the /assets location, as they already exist in gitlab-http.conf.

Insert custom settings into the NGINX configuration

To add custom settings to the NGINX configuration:

Edit /etc/gitlab/gitlab.rb:

# Example: include a directory to scan for additional config files
nginx['custom_nginx_config'] = "include /etc/gitlab/nginx/sites-enabled/*.conf;"

Save the file and reconfigure GitLab for the changes to take effect.

This inserts the defined string at the end of the http block in /var/opt/gitlab/nginx/conf/nginx.conf.

For example, to create and enable custom server blocks:

Create custom server blocks in the /etc/gitlab/nginx/sites-available directory.
Create the /etc/gitlab/nginx/sites-enabled directory if it doesn’t exist.

To enable a custom server block, create a symlink:

sudo ln -s /etc/gitlab/nginx/sites-available/example.conf /etc/gitlab/nginx/sites-enabled/example.conf

Reload NGINX configuration:
```
sudo gitlab-ctl hup nginx
```
Alternatively, you can restart NGINX:
```
sudo gitlab-ctl restart nginx
```

You can add domains for server blocks as an alternative name to the generated Let’s Encrypt SSL certificate.

Custom NGINX settings inside the /etc/gitlab/ directory are backed up to /etc/gitlab/config_backup/ during an upgrade and when sudo gitlab-ctl backup-etc is manually executed.

Configure custom error pages

To modify text on the default GitLab error pages:

Edit /etc/gitlab/gitlab.rb:

nginx['custom_error_pages'] = {
 '404' => {
   'title' => 'Example title',
   'header' => 'Example header',
   'message' => 'Example message'
 }
}

This example modifies the default 404 error page. You can use this format for any valid HTTP error code, such as 404 or 502.

Save the file and reconfigure GitLab for the changes to take effect.

The result for the 404 error page would look like this:

Use an existing Passenger and NGINX installation

You can host GitLab with an existing Passenger and NGINX installation and still use Linux packages for updates and installation.

If you disable NGINX, you can’t access other services included in a Linux package installation, such as Mattermost, unless you manually add them to nginx.conf.

Configuration

To set up GitLab with an existing Passenger and NGINX installation:

Edit /etc/gitlab/gitlab.rb:

# Define the external url
external_url 'http://git.example.com'

# Disable the built-in NGINX
nginx['enable'] = false

# Disable the built-in Puma
puma['enable'] = false

# Set the internal API URL
gitlab_rails['internal_api_url'] = 'http://git.example.com'

# Define the web server process user (ubuntu/nginx)
web_server['external_users'] = ['www-data']

Save the file and reconfigure GitLab for the changes to take effect.

Configure the virtual host (server block)

In your custom Passenger/NGINX installation:

Create a new site configuration file with the following content:

upstream gitlab-workhorse {
 server unix://var/opt/gitlab/gitlab-workhorse/sockets/socket fail_timeout=0;
}

server {
 listen *:80;
 server_name git.example.com;
 server_tokens off;
 root /opt/gitlab/embedded/service/gitlab-rails/public;

 client_max_body_size 250m;

 access_log  /var/log/gitlab/nginx/gitlab_access.log;
 error_log   /var/log/gitlab/nginx/gitlab_error.log;

 # Ensure Passenger uses the bundled Ruby version
 passenger_ruby /opt/gitlab/embedded/bin/ruby;

 # Correct the $PATH variable to included packaged executables
 passenger_env_var PATH "/opt/gitlab/bin:/opt/gitlab/embedded/bin:/usr/local/bin:/usr/bin:/bin";

 # Make sure Passenger runs as the correct user and group to
 # prevent permission issues
 passenger_user git;
 passenger_group git;

 # Enable Passenger & keep at least one instance running at all times
 passenger_enabled on;
 passenger_min_instances 1;

 location ~ ^/[\w\.-]+/[\w\.-]+/(info/refs|git-upload-pack|git-receive-pack)$ {
   # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
   error_page 418 = @gitlab-workhorse;
   return 418;
 }

 location ~ ^/[\w\.-]+/[\w\.-]+/repository/archive {
   # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
   error_page 418 = @gitlab-workhorse;
   return 418;
 }

 location ~ ^/api/v3/projects/.*/repository/archive {
   # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
   error_page 418 = @gitlab-workhorse;
   return 418;
 }

 # Build artifacts should be submitted to this location
 location ~ ^/[\w\.-]+/[\w\.-]+/builds/download {
     client_max_body_size 0;
     # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
     error_page 418 = @gitlab-workhorse;
     return 418;
 }

 # Build artifacts should be submitted to this location
 location ~ /ci/api/v1/builds/[0-9]+/artifacts {
     client_max_body_size 0;
     # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
     error_page 418 = @gitlab-workhorse;
     return 418;
 }

 # Build artifacts should be submitted to this location
 location ~ /api/v4/jobs/[0-9]+/artifacts {
     client_max_body_size 0;
     # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
     error_page 418 = @gitlab-workhorse;
     return 418;
 }


 # For protocol upgrades from HTTP/1.0 to HTTP/1.1 we need to provide Host header if its missing
 if ($http_host = "") {
 # use one of values defined in server_name
   set $http_host_with_default "git.example.com";
 }

 if ($http_host != "") {
   set $http_host_with_default $http_host;
 }

 location @gitlab-workhorse {

   ## https://github.com/gitlabhq/gitlabhq/issues/694
   ## Some requests take more than 30 seconds.
   proxy_read_timeout      3600;
   proxy_connect_timeout   300;
   proxy_redirect          off;

   # Do not buffer Git HTTP responses
   proxy_buffering off;

   proxy_set_header    Host                $http_host_with_default;
   proxy_set_header    X-Real-IP           $remote_addr;
   proxy_set_header    X-Forwarded-For     $proxy_add_x_forwarded_for;
   proxy_set_header    X-Forwarded-Proto   $scheme;

   proxy_http_version 1.1;
   proxy_pass http://gitlab-workhorse;

   ## The following settings only work with NGINX 1.7.11 or newer
   #
   ## Pass chunked request bodies to gitlab-workhorse as-is
   # proxy_request_buffering off;
   # proxy_http_version 1.1;
 }

 ## Enable gzip compression as per rails guide:
 ## http://guides.rubyonrails.org/asset_pipeline.html#gzip-compression
 ## WARNING: If you are using relative urls remove the block below
 ## See config/application.rb under "Relative url support" for the list of
 ## other files that need to be changed for relative url support
 location ~ ^/(assets)/ {
   root /opt/gitlab/embedded/service/gitlab-rails/public;
   gzip_static on; # to serve pre-gzipped version
   expires max;
   add_header Cache-Control public;
 }

 error_page 502 /502.html;
}

Replace git.example.com with your server URL.

If you receive a 403 Forbidden error, ensure Passenger is enabled in /etc/nginx/nginx.conf:

Uncomment this line:
```
# include /etc/nginx/passenger.conf;
```
Reload the NGINX configuration:
```
sudo service nginx reload
```

Configure NGINX status monitoring

By default, GitLab configures an NGINX health-check endpoint at 127.0.0.1:8060/nginx_status to monitor your NGINX server status.

The endpoint displays the following information:

Active connections: 1
server accepts handled requests
18 18 36
Reading: 0 Writing: 1 Waiting: 0

Active connections: Open connections in total.
Three figures showing:
- All accepted connections.
- All handled connections.
- Total number of handled requests.
Reading: NGINX reads request headers.
Writing: NGINX reads request bodies, processes requests, or writes responses to a client.
Waiting: Keep-alive connections. This number depends on the keepalive_timeout directive.

Configure NGINX status options

To configure NGINX status options:

Edit /etc/gitlab/gitlab.rb:

nginx['status'] = {
 "listen_addresses" => ["127.0.0.1"],
 "fqdn" => "dev.example.com",
 "port" => 9999,
 "options" => {
   "access_log" => "on", # Disable logs for stats
   "allow" => "127.0.0.1", # Only allow access from localhost
   "deny" => "all" # Deny access to anyone else
 }
}

To disable the NGINX status endpoint:

nginx['status'] = {
 'enable' => false
}

Save the file and reconfigure GitLab for the changes to take effect.

Configure user permissions for uploads

To ensure user uploads are accessible, add your NGINX user (usually www-data) to the gitlab-www group:

sudo usermod -aG gitlab-www www-data

Templates

The configuration files are similar to the bundled GitLab NGINX configuration, with these differences:

Passenger configuration is used instead of Puma.
HTTPS is not enabled by default, but you can enable it.

After making changes to the NGINX configuration:

For Debian-based systems, restart NGINX:
```
sudo service nginx restart
```
For other systems, refer to your operating system’s documentation for the correct command to restart NGINX.

NGINX settings

Service-specific NGINX settings

Enable HTTPS

Change the default proxy headers

Configure GitLab trusted proxies and NGINX `real_ip` module

Configure the PROXY protocol

Use a non-bundled web server

NGINX configuration options

Set the NGINX listen addresses

Set the NGINX listen port

Change the verbosity level of NGINX logs

Set the Referrer-Policy header

Disable Gzip compression

Disable proxy request buffering

Configure `robots.txt`

Insert custom NGINX settings into the GitLab server block

Notes

Insert custom settings into the NGINX configuration

Configure custom error pages

Use an existing Passenger and NGINX installation

Configuration

Configure the virtual host (server block)

Configure NGINX status monitoring

Configure NGINX status options

Configure user permissions for uploads

Templates

Help & feedback

Docs

Product

Feature availability and product trials

Get Help

NGINX settings

Service-specific NGINX settings

Enable HTTPS

Change the default proxy headers

Configure GitLab trusted proxies and NGINX real_ip module

Configure the PROXY protocol

Use a non-bundled web server

NGINX configuration options

Set the NGINX listen addresses

Set the NGINX listen port

Change the verbosity level of NGINX logs

Set the Referrer-Policy header

Disable Gzip compression

Disable proxy request buffering

Configure robots.txt

Insert custom NGINX settings into the GitLab server block

Notes

Insert custom settings into the NGINX configuration

Configure custom error pages

Use an existing Passenger and NGINX installation

Configuration

Configure the virtual host (server block)

Configure NGINX status monitoring

Configure NGINX status options

Configure user permissions for uploads

Templates

Help & feedback

Docs

Product

Feature availability and product trials

Get Help

Configure GitLab trusted proxies and NGINX `real_ip` module

Configure `robots.txt`