Jump to content

Hard landing: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
BG19bot (talk | contribs)
m WP:CHECKWIKI error fix for #61. Punctuation goes before References. Do general fixes if a problem exists. -
Seriously, who tried to math here...
Line 4: Line 4:
A '''hard landing''' occurs when an [[aircraft]] or [[spacecraft]] hits the ground with a greater vertical speed and [[force]] than in a normal landing.
A '''hard landing''' occurs when an [[aircraft]] or [[spacecraft]] hits the ground with a greater vertical speed and [[force]] than in a normal landing.


[[Landing]] is the final phase in [[flight]], in which the aircraft returns to the [[Earth|ground]]. The average vertical speed in a landing is around 2 meters per second (10&nbsp;ft/s); greater vertical speed should be classed by crew as "hard". Crew judgement is most reliable to determine hard landing, as determination based on recorded acceleration value is difficult and not advisable,<ref>RALPH MICHAEL GARBER, LAWRENCE VAN KIRK. [http://www.boeing.com/commercial/aeromagazine/aero_14/conditional_story.html Conditional Inspections] // Boeing Aero No 14</ref> partially because there is no recording of true vertical acceleration.<ref>Guillaume Aigoin, [http://essi.easa.europa.eu/ecast/wp-content/uploads/2012/01/AIGOIN-Characterising-hard-landings.pdf#page=7 Characterising hard landings] / [[EASA]] EOFDM Conference, 12 January 2012, page 7: "The vertical parameter is neither vertical nor an acceleration … It is the normal load factor in the aircraft
[[Landing]] is the final phase in [[flight]], in which the aircraft returns to the [[Earth|ground]]. The average vertical speed in a landing is around 2 meters per second (6.6 ft/s); greater vertical speed should be classed by crew as "hard". Crew judgement is most reliable to determine hard landing, as determination based on recorded acceleration value is difficult and not advisable,<ref>RALPH MICHAEL GARBER, LAWRENCE VAN KIRK. [http://www.boeing.com/commercial/aeromagazine/aero_14/conditional_story.html Conditional Inspections] // Boeing Aero No 14</ref> partially because there is no recording of true vertical acceleration.<ref>Guillaume Aigoin, [http://essi.easa.europa.eu/ecast/wp-content/uploads/2012/01/AIGOIN-Characterising-hard-landings.pdf#page=7 Characterising hard landings] / [[EASA]] EOFDM Conference, 12 January 2012, page 7: "The vertical parameter is neither vertical nor an acceleration … It is the normal load factor in the aircraft
reference frame is not sufficient for assessing contact severity!"</ref>
reference frame is not sufficient for assessing contact severity!"</ref>



Revision as of 02:42, 9 January 2017

A hard landing occurs when an aircraft or spacecraft hits the ground with a greater vertical speed and force than in a normal landing.

Landing is the final phase in flight, in which the aircraft returns to the ground. The average vertical speed in a landing is around 2 meters per second (6.6 ft/s); greater vertical speed should be classed by crew as "hard". Crew judgement is most reliable to determine hard landing, as determination based on recorded acceleration value is difficult and not advisable,[1] partially because there is no recording of true vertical acceleration.[2]

Hard landings can be caused by weather conditions, mechanical problems, over-weight aircraft, pilot decision and/or pilot error. The term hard landing usually implies that the pilot still has total or partial control over the aircraft, as opposed to an uncontrolled descent into terrain (a crash). Hard landings can vary in their consequences, from mild passenger discomfort to vehicle damage, structural failure, injuries, and/or loss of life. When an aircraft has a hard landing, it must be inspected for damage before its next flight.[3]

For helicopters, a hard landing can occur after mechanical or engine damage or failure when the rotor(s) are still intact and free to turn. Autorotation, in which airflow over the rotors keeps them turning and provides some lift, can allow limited pilot control during descent. As an unpowered descent, it requires considerable pilot skill and experience to safely execute.

A hard landing of a spacecraft such as a rocket stage usually ends with its destruction and can be intentional or unintentional. When a high-velocity impact is planned (when its purpose is to study consequences of impact), the spacecraft is called an impactor.

See also

References

  1. ^ RALPH MICHAEL GARBER, LAWRENCE VAN KIRK. Conditional Inspections // Boeing Aero No 14
  2. ^ Guillaume Aigoin, Characterising hard landings / EASA EOFDM Conference, 12 January 2012, page 7: "The vertical parameter is neither vertical nor an acceleration … It is the normal load factor in the aircraft reference frame is not sufficient for assessing contact severity!"
  3. ^ RALPH MICHAEL GARBER, LAWRENCE VAN KIRK. Conditional Inspections // Boeing Aero No 14