Jump to content

GSM 03.48

From Wikipedia, the free encyclopedia

This is the current revision of this page, as edited by AnomieBOT (talk | contribs) at 15:32, 19 September 2023 (Dating maintenance tags: {{Unreferenced section}}). The present address (URL) is a permanent link to this version.

(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)

GSM 03.48 is a protocol used to exchange secured packets between an entity in a GSM PLMN and an entity in the SIM card. Secured packets contain application messages to which certain mechanisms according to GSM 03.48 have been applied. Application messages are commands or data exchanged between an application resident in or behind the GSM PLMN and on the Wapor MMS. [1] [2] [3] It is evolved to 3GPP TS 23.048[4] in 3G. From Release 5, TS 23.048 is split into the generic part and the bearers specific application. The generic part on packet structure has been transferred to SCP (ETSI TS 102 225[5]). The bearers specific part is 3GPP TS 31.115.[6]

Overview

[edit]

The sending application prepares an application message and forwards it to the sending entity, with an indication of the security to be applied to the message.

The sending entity prepends a security header (the command header) to the application message. It then applies the requested security to part of the command header and all of the application message, including any padding octets. The resulting structure is referred to as the (secured) command packet.

Under normal circumstances the receiving entity receives the command packet and unpacks it according to the security parameters indicated in the command header. The receiving entity subsequently forwards the application message to the receiving application indicating to the receiving application the security that was applied. The interface between the sending application and sending entity and the interface between the receiving entity and receiving application are proprietary.

If so indicated in the command header, the receiving entity shall create a (secured) response packet. The response packet consists of a security header (the response header) and optionally, application specific data supplied by the receiving application. Both the response header and the application specific data are secured using the security mechanisms indicated in the received command packet. The response packet will be returned to the sending entity, subject to constraints in the transport layer, e.g. timing.

References

[edit]
  1. ^ "GSM 03.48 Java API and Realization Library". GitHub. Retrieved 23 March 2018.
  2. ^ "GSM 03.48 Version 890". Retrieved 16 May 2011.
  3. ^ "3GPP Standard Page". Retrieved 16 May 2011.
  4. ^ "3GPP TS 23.048".
  5. ^ "ETSI TS 102 225".
  6. ^ "3GPP TS 31.115".