Jump to content

Clark Mills (sculptor)

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Oceanflynn (talk | contribs) at 01:52, 25 June 2020 (expanding). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Clark Mills
Born(1810-12-13)December 13, 1810
DiedJanuary 12, 1883(1883-01-12) (aged 72)
NationalityAmerican
Educationself-taught
Known forSculpture
Notable workEquestrian statue of Andrew Jackson (Washington, D.C.) (1853)
Equestrian statue of George Washington (Washington Circle) (1860)
Statue of Freedom (1863)

Clark Mills (December 13, 1810 – January 12, 1883) was an American sculptor, best known for four versions of an equestrian statue of Andrew Jackson, located in Washington, D.C. with replicas in Nashville, Tennessee, Jacksonville, Florida, and New Orleans, Louisiana.

Early years

Mills was born on September 1, 1815 in Onondaga County, New York.[1][2] When his father passed away he was sent to his uncle's but found that he was too harsh so he ran away.[1][2] He had very little formal education. Before he turned 22, he had worked as a "teamster, lumberjack, farmhand, carpenter, and millwright."[1][2] He came to Charleston, South Carolina in 1837 and worked there as an ornamental plasterer.[1][2] In the 1840s he "developed a new way of taking plaster life-masks, which he then transformed into portrait busts," according to James Dillon, an OHAP architectural historian. [2] Wayne Craven, author of the 1968 book Sculpture in America, wrote that "What he learned he acquired from the life-mask itself, and this established his style as one strongly dependent upon naturalism."[1]: 167 

His first stone carving was an 1845 bust of John C. Calhoun, who in 1845, was Charleston's "most distinguished citizen". The bust is in the Charleston's City Hall Museum and there is a bronze version in the Corcoran Gallery of Art in Washington, D.C. [2]

Clark Mills studio and foundries

Clark Mills had a number of studios and foundries. From 1837 to 1848, Mills had his first studio on Broad Street, Charleston, South Carolina, which was assigned the National Historic Landmark designation on December 21, 1965 by the Office of Archeology and Historic Preservation (OAHP).[2][1]

In 1849, in order to produce the Jackson equestrian statue, Mills built a temporary furnace and studio on the Ellipse at 15th and Pennsylvania Avenue, near LaFayette Square.[3][4]: 377 There is a statue of General Sherman there currently, south of the Treasury Building. [2] His equestrian statue of George Washington was also cast at this site.[4]


Mills purchased a parcel on the border of Maryland and the District of Columbia where is constructed his mansion and a large octagon-shaped studio and foundry on Bladensburg Road. It was at the Bladensburg foundry that the 1863 bronze Statue of Freedom was cast.[4]

Major works

Equestrian statue of Andrew Jackson

Equestrian statue Andrew Jackson, Lafayette Square, Washington, D.C.
Equestrian statue Andrew Jackson, Lafayette Square, Washington, D.C.

One of Mills' most well-known sculptures is the equestrian statue of Andrew Jackson, located in President's Park, also known as Lafayette Square, which is situated on the north portico side of the White House.

Mills presented a submission to a competition for the contract to produce the statue. Mills' sculpture depicted Major Jackson on a rearing horse, raising his hat to the troops he was reviewing at the Battle of New Orleans on January 8, 1815.[2]

He won the competition to create the statue in 1848 and moved from Charleston to Washington, bringing with him the enslaved master craftsman, Philip Reid (c. 1820 – February 6, 1892), whom he had purchased in 1842. Along with other workers, Mills had eleven slaves working for him. Reid and the other enslaved workers were freed with the passage of the April 16, 1862 District of Columbia Compensated Emancipation Act which freed thousands of slaves in that District.[5]

James M. Goode, (1939-2019), a historian who had published numerous books relating to Washington, D.C. history,[6] described the difficult casting process. Mills produced six castings of the statue of Andrew Jackson until the final one was completed, with ten pieces, six for Jackson and four for the horse.[3]: 377  In his casting, he was assisted by Reid. The casting was completed 1852, making this the first equestrian statue made in the US, and also the first bronze statue cast in the US. It has been described as the first equestrian statue made with the horse rearing on two legs with no additional support.

Mills unveiled the 15 ton bronze statue of Andrew Jackson on January 8, 1853, the 38th anniversary of the Battle of New Orleans and according to one account by a reporter for the Washington Union, twenty thousand people attended in and around the park. President Franklin Pierce was in attendance and Senator Stephen A. Douglas delivered the keynote address.[2]

Jackson Square, New Orleans
Jackson Square, New Orleans

Mills made castings of the statue, that are now in New Orleans, Jacksonville, Florida, and Nashville, Tennessee.[7]

Nashville, Tennessee
Nashville, Tennessee

Equestrian statue of George Washington (Washington Circle) (1860)

Main article: Equestrian statue of George Washington (Washington Circle)
George Washington in Washington Circle
George Washington in Washington Circle

Mills also captured a tense and crucial moment in the American Revolutionary War with the creation of an equestrian statue of Lt. Gen. George Washington in 1860. Congress commissioned this work in 1853 because of the tremendous popularity of Mills' equestrian statue of Andrew Jackson. The elaborate high pedestal that Mills originally designed, with three tiers of sculptured relief panels and smaller equestrian statues of Washington's generals, were never executed because of a lack of adequate funds.[8]

Statue of Freedom (1863)

Main article: Statue of Freedom

Beginning in 1860, the Statue of Freedom, which sits atop the United States Capitol, was cast in five main sections by Mills with the assistance of Philip Reid.[9] The casting was undertaken at Mills' foundry on his estate on the border of Maryland and D.C.

Abraham Lincoln (1865)

In 1865 Mills made a life-cast of Abraham Lincoln's head. It is generally felt to be inferior in technical quality to the 1860 cast made by Leonard Volk, but has the advantage of showing Lincoln's entire skull, not just the face as does Volk's.[10]

Other works

He made 124 portrait busts, and in 1875, Mills began to create life masks of native Americans. Over a period of five years, he made sixty-four native Americans in St. Augustine and forty-seven near Hampton Roads, Virginia.[2]

Reviews of Mill's work

In his biography of Mills, historian James Dillon, which was largely based on Wayne Craven's 1968 Sculpture in America, Dillon cited Craven, "In truth, Mills was a greater engineer than he was a sculptor. He deserves a special place.....for several reasons, but none of them is based primarily on aesthetic grounds or on the value of any piece or work of art....As an engineer and technician he was unsurpassed in his time in the casting of bronze; and special consideration should be given to his equestrian monument to Jackson and the brilliant solution he devised...."[1]: 174 [2] Dillon described Mills as a "pioneer in the working of the metal".[2]

Personal life

Mills was married and had three sons. His second wife and stepdaughter cared for him in his old age.

In 1846, Mills purchased a large tract of land from G. M. Clavert, that was partially in the Maryland and partially in District of Columbia, which included Meadow Bank Spa Spring.[11]: 59, 64  The parcel included a natural springs, locally known as Upper Hickey, which had a flow abundant enough for the operation of the foundry Mills planned to construct.[11]: 59  This is where he built his large Bladensburg Road octagon-shaped foundry.[5]

When Mills moved to Washington from Charleston, South Carolina in 1848, he brought his slaves with him. By 1862, he had eleven slaves working for him—Lettie, Tilly, Tow, Ellick, Jackson, George, Emily, and Levi Howard, Rachel Thomas, Auw Rofs and Philip Reid.[11]: 59  They were freed under the 1862 District of Columbia Compensated Emancipation Act,[5] which entitled Mills $5,200 in was compensation.[11]: 59 

Glenwood Cemetery, Washington, D.C.
Glenwood Cemetery, Washington, D.C.

Mills was 72 years old when died on January 12, 1883.[11] He was interred at Glenwood Cemetery in Washington, D.C.[12]: 4 

The three sons challenged the will which gave almost all the estate to Mills second wife and stepdaughter.[13] In 1884, Mills' estate was auctioned off in a public sale, and subdivided, largely because of the "acrimonious dispute" between his sons and his stepdaughter and second wife.[11]: 63  The brass foundry remained operational until 1903, long after Mill's death.[11]: 60 

Honors

In World War II, the United States liberty ship SS Clark Mills was named in his honor.

References

  1. ^ a b c d e f g Craven, Wayne (1968). Sculpture in America. Crowell. p. 722.
  2. ^ a b c d e f g h i j k l m Dillon, James (May 29, 1975). "National Historic Landmarks: The Clark Mills Studio, Stoney and Stoney Law Office". Office of Archeology and Historic Preservation (OAHP). National Register of Historic Places Inventory. Washington, D.C. United States Department of the Interior, United States National Park Service.
  3. ^ a b Goode, James M. (1974). Outdoor Sculpture of Washington, D.C. Smithsonian Institution Press. ISBN 0-87474-138-6.
  4. ^ a b c "Clark Mills's Foundry". White House Historical Association (WHHA). nd. Retrieved June 23, 2020.
  5. ^ a b c "Philip Reid and the Statue of Freedom". United States Senate Historical Office (SHO). U.S. Senate: The Civil War: The Senate's Story. nd. Retrieved June 22, 2020.
  6. ^ Barnes, Bart title = James Goode, historian of Washington statues and architecture, dies at 80 (January 7, 2020). Washington Post https://www.washingtonpost.com/local/obituaries/james-goode-historian-of-washington-statues-and-architecture-dies-at-80/2020/01/07/97c3a16e-30c8-11ea-91fd-82d4e04a3fac_story.html. Retrieved June 24, 2020. {{cite news}}: Missing or empty |title= (help); Missing pipe in: |first= (help)CS1 maint: multiple names: authors list (link) CS1 maint: numeric names: authors list (link)
  7. ^ "Clark Mills. Bronze Sculpture, Andrew Jackson". Art in New Orleans. Retrieved June 23, 2020.
  8. ^ Goode, James (2009). Washington Sculpture: A Cultural History of Outdoor Sculpture in the Nation's Capital. Baltimore: The Johns Hopkins University Press. p. 480. ISBN 9780801888106.
  9. ^ "The Capitol Story: Statue of Freedom: Clark Mills Sculptor". History of Congress and the Capitol. Archived from the original on August 31, 2011. Retrieved June 24, 2020.
  10. ^ Clark Mills. Life Cast of Abraham Lincoln, 1865, Library of Congress
  11. ^ a b c d e f g Montague, Jeremiah (August 2017). The Subdivisions of Avalon Heights, Langdon, Montello, Woodridge,and Winthrop Heights Within Washington County, District of Columbia. Book Venture Publishing LLC. p. 668. ISBN 1946492167.
  12. ^ "The Funeral of Clark Mills". The Evening Star. January 15, 1883.
  13. ^ "Clark Mill's Estate" (PDF). The New York Times. January 27, 1883. Retrieved June 24, 2020.

Further reading

  • Anna W. Rutledge, "Cogdell and Mills, Charleston Sculptors", Antiques Magazine .March 1942, pp. 192-93, 205-7.
  • Adeline Adams, "Clark Mills" in Dictionary of American Biography. XIII, 4-5.

Sources

Wikimedia Commons has media related to Clark Mills (sculptor).
Retrieved from "https://en.wikipedia.org/w/index.php?title=Clark_Mills_(sculptor)&oldid=964360727"