Jump to content

alias (command)

From Wikipedia, the free encyclopedia
(Redirected from Alias (EFI command))
alias
Original author(s)Bill Joy
Developer(s)Various open-source and commercial developers
Operating systemUnix, Unix-like, AmigaDOS, FreeDOS, Microsoft Windows, ReactOS, AROS, KolibriOS, IBM i
PlatformCross-platform
TypeCommand

In computing, alias is a command in various command-line interpreters (shells), which enables a replacement of a word by another string.[1] It is mainly used for abbreviating a system command, or for adding default arguments to a regularly used command. alias is available in Unix shells, AmigaDOS, 4DOS/4NT, FreeDOS, KolibriOS, Windows PowerShell, ReactOS, and the EFI shell.[2] Aliasing functionality in the MS-DOS and Microsoft Windows operating systems is provided by the DOSKey command-line utility.

An alias will last for the life of the shell session. Regularly used aliases can be set from the shell's rc file (such as .bashrc) so that they will be available upon the start of the corresponding shell session. The alias commands may either be written in the config file directly or sourced from a separate file.

History

[edit]

In Unix, aliases were introduced in the C shell and survive in descendant shells such as tcsh and bash. C shell aliases were strictly limited to one line. This was useful for creating simple shortcut commands, but not more complex constructs. Older versions of the Bourne shell did not offer aliases, but it did provide functions, which are more powerful than the csh alias concept. The alias concept from csh was imported into Bourne Again Shell (bash) and the Korn shell (ksh). With shells that support both functions and aliases but no parameterized inline shell scripts, the use of functions wherever possible is recommended. Cases where aliases are necessary include situations where chained aliases are required (bash and ksh). The alias command has also been ported to the IBM i operating system.[3]

Usage

[edit]

Creating aliases

[edit]

Common Unix shells

[edit]

Non-persistent aliases can be created by supplying name/value pairs as arguments for the alias command. In Unix shells the syntax is:

alias gc='git commit'

C shell

[edit]

The corresponding syntax in the C shell or tcsh shell is:

alias gc "git commit"

This alias means that when the command gc is read in the shell, it will be replaced with git commit and that command will be executed instead.

4DOS

[edit]

In the 4DOS/4NT shell the following syntax is used to define cp as an alias for the 4DOS copy command:

alias cp copy

Windows PowerShell

[edit]

To create a new alias in Windows PowerShell, the new-alias cmdlet can be used:

new-alias ci copy-item

This creates a new alias called ci that will be replaced with the copy-item cmdlet when executed.

In PowerShell, an alias cannot be used to specify default arguments for a command. Instead, this must be done by adding items to the collection $PSDefaultParameterValues, one of the PowerShell preference variables.

Viewing currently defined aliases

[edit]

To view defined aliases the following commands can be used:

alias          # Used without arguments; displays a list of all current aliases
alias -p       # List aliases in a way that allows re-creation by sourcing the output; not available in 4DOS/4NT and PowerShell
alias myAlias  # Displays the command for a defined alias

Overriding aliases

[edit]

In Unix shells, it is possible to override an alias by quoting any character in the alias name when using the alias. For example, consider the following alias definition:

alias ls='ls -la'

To override this alias and execute the ls command as it was originally defined, the following syntax can be used:

'ls'

or

\ls

In the 4DOS/4NT shell it is possible to override an alias by prefixing it with an asterisk. For example, consider the following alias definition:

alias dir = *dir /2/p

The asterisk in the 2nd instance of dir causes the unaliased dir to be invoked, preventing recursive alias expansion. Also the user can get the unaliased behaviour of dir at the command line by using the same syntax:

*dir

Changing aliases

[edit]

In Windows PowerShell, the set verb can be used with the alias cmdlet to change an existing alias:

set-alias ci cls

The alias ci will now point to the cls command.

In the 4DOS/4NT shell, the eset command provides an interactive command line to edit an existing alias:

eset /a cp

The /a causes the alias cp to be edited, as opposed to an environment variable of the same name.

Removing aliases

[edit]

In Unix shells and 4DOS/4NT, aliases can be removed by executing the unalias command:

unalias copy          # Removes the copy alias
unalias -a            # The -a switch will remove all aliases; not available in 4DOS/4NT
unalias *             # 4DOS/4NT equivalent of `unalias -a` - wildcards are supported

In Windows PowerShell, the alias can be removed from the alias:\ drive using remove-item:

remove-item alias:ci  # Removes the ci alias

Features

[edit]

Chaining

[edit]

An alias usually replaces just the first word. But some shells, such as bash and ksh, allow a sequence or words to be replaced. This particular feature is unavailable through the function mechanism.

The usual syntax is to define the first alias with a trailing space character. For instance, using the two aliases:

alias list='ls '      # note the trailing space to trigger chaining
alias long='-Flas'    # options to ls for a long listing

allows:

list long myfile      # becomes "ls -Flas myfile" when run

for a long listing, where "long" is also evaluated as an alias.

Command arguments

[edit]

In the C Shell, arguments can be embedded inside the command using the string \!*. For example, with this alias:

 alias ls-more 'ls \!* | more'

ls-more /etc /usr expands to ls /etc /usr | more to list the contents of the directories /etc and /usr, pausing after every screenful. Without \!*,

 alias ls-more 'ls | more'

would instead expand to ls | more /etc /usr which incorrectly attempts to open the directories in more.[4]

The Bash and Korn shells instead use shell functions — see § Alternatives below.

Alternatives

[edit]

Aliases should usually be kept simple. Where it would not be simple, the recommendation is usually to use one of the following:

  • Shell scripts, which essentially provide the full ability to create new system commands.
  • Symbolic links in the user's PATH (such as /bin). This method is useful for providing an additional way of calling the command, and in some cases may allow access to a buried command function for the small number of commands that use their invocation name to select the mode of operation.
  • Shell functions, especially if the command being created needs to modify the internal runtime environment of the shell itself (such as environment variables), needs to change the shell's current working directory, or must be implemented in a way which guarantees they it appear in the command search path for anything but an interactive shell (especially any "safer" version of rm, cp, mv and so forth).

The most common form of aliases, which just add a few options to a command and then include the rest of the command line, can be converted easily to shell functions following this pattern:

alias ll='ls -Flas'              # long listing, alias
ll () { ls -Flas "$@" ; }        # long listing, function

To prevent a function from calling itself recursively, use command:

ls () { command ls --color=auto "$@" ; }

In older Bourne shells use /bin/ls instead of command ls.

References

[edit]
  1. ^ Rugheimer, Hannes (2020-06-10). AmigaDOS quick reference : Rügheimer, Hannes : Free Download, Borrow, and Streaming : Internet Archive. ISBN 9781557550491. Retrieved 2020-09-12 – via Internet Archive.
  2. ^ "EFI Shells and Scripting". Intel. Retrieved 2013-09-25.
  3. ^ IBM. "IBM System i Version 7.2 Programming Qshell" (PDF). IBM. Retrieved 2020-09-05.
  4. ^ "Examples of passing arguments given to a command alias". UNIXhelp. University of Edinburgh. Archived from the original on 2012-11-25.

Further reading

[edit]
[edit]