Jump to content

Arsenous acid

From Wikipedia, the free encyclopedia
(Redirected from Arsenious acid)
Arsenous acid
Structural formula
Ball-and-stick model
Names
IUPAC name
Arsorous acid
Other names
Arsenious acid
Arsenic oxide
Identifiers
3D model (JSmol)
ChEBI
ChemSpider
DrugBank
UNII
  • InChI=1S/AsH3O3/c2-1(3)4/h2-4H checkY
    Key: GCPXMJHSNVMWNM-UHFFFAOYSA-N checkY
  • InChI=1/AsH3O3/c2-1(3)4/h2-4H
    Key: GCPXMJHSNVMWNM-UHFFFAOYAA
  • O[As](O)O
Properties
H3AsO3
Molar mass 125.94 g/mol
Appearance Only exists in aqueous solutions
Conjugate base Arsenite
-51.2·10−6 cm3/mol
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
Toxic, corrosive
NIOSH (US health exposure limits):
PEL (Permissible)
[1910.1018] TWA 0.010 mg/m3[1]
REL (Recommended)
Ca C 0.002 mg/m3 [15-minute][1]
IDLH (Immediate danger)
Ca [5 mg/m3 (as As)][1]
Related compounds
Related compounds
Arsenic acid
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Arsenous acid (or arsenious acid) is the inorganic compound with the formula H3AsO3. It is known to occur in aqueous solutions, but it has not been isolated as a pure material, although this fact does not detract from the significance of As(OH)3.[2]

Properties

[edit]
Phosphorous acid exists in as the dihydroxy tautomer in contrast to arsenous acid.

As(OH)3 is a pyramidal molecule consisting of three hydroxyl groups bonded to arsenic. The 1H NMR spectrum of arsenous acid solutions consists of a single signal consistent with the molecule's high symmetry.[3] In contrast, the nominally related phosphorous acid H3PO3 adopts the structure HPO(OH)2. The structural analogue of arsenous acid (P(OH)3) is a very minor equilibrium component of such solutions. The differing behaviors of the As and P compounds reflect a trend whereby high oxidation states are more stable for lighter members of main group elements than their heavier congeners.[4]

One tautomer of arsenous acid is HAsO(OH)2, which is called arsonic acid. It has not been isolated or well-characterized.

Synthesis

[edit]

The preparation of As(OH)3 involves a slow hydrolysis of arsenic trioxide in water. Addition of base converts arsenous acid to the arsenite ions [AsO(OH)2], [AsO2(OH)]2−, and [AsO3]3−.

Reactions

[edit]

With its first pKa being 9.2, As(OH)3 is a weak acid.[4] Reactions attributed to aqueous arsenic trioxide are due to arsenous acid and its conjugate bases.

Like arsenic trioxide, arsenous acid is sometimes amphoteric. For example, it reacts with hydrochloric, hydrobromic, and hydroiodic acids to produce arsenic trichloride, tribromide, and triiodide.

As(OH)3 + 3 HCl ⇌ AsCl3 + 3 H2O
As(OH)3 + 3 HBr ⇌ AsBr3 + 3 H2O
As(OH)3 + 3 HI ⇌ AsI3 + 3 H2O

Reaction of arsenous acid with methyl iodide gives methylarsonic acid. This historically significant conversion is the Meyer reaction:[5]

As(OH)3 + CH3I + NaOH ⇌ CH3AsO(OH)2 + NaI + H2O

Alkylation occurs at arsenic, and the oxidation state of arsenic increases from +3 to +5.

Toxicology

[edit]

Arsenic-containing compounds are highly toxic and carcinogenic. The anhydride form of arsenous acid, arsenic trioxide, is used as a herbicide, pesticide, and rodenticide.

References

[edit]
  1. ^ a b c NIOSH Pocket Guide to Chemical Hazards. "#0038". National Institute for Occupational Safety and Health (NIOSH).
  2. ^ Munoz-Hernandez, M.-A. (1994). "Arsenic: Inorganic Chemistry". In King, R. B. (ed.). Encyclopedia of Inorganic Chemistry. Chichester: John Wiley & Sons.
  3. ^ Kolozsi, A.; Lakatos, A.; Galbács, G.; Madsen, A. Ø.; Larsen, E.; Gyurcsik, B. (2008). "A pH-Metric, UV, NMR, and X-ray Crystallographic Study on Arsenous Acid Reacting with Dithioerythritol" (PDF). Inorganic Chemistry. 47 (9): 3832–3840. doi:10.1021/ic7024439. PMID 18380458. Archived from the original (PDF) on 2012-04-25. Retrieved 2011-12-18.
  4. ^ a b Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.
  5. ^ G. Meyer (1883). "Ueber einige anomale Reaktionen". Berichte der Deutschen Chemischen Gesellschaft. 13: 1439–1443. doi:10.1002/cber.188301601316.
[edit]