Campbell diagram
Appearance
(Redirected from Campbell Diagram)
![]() | This article includes a list of general references, but it lacks sufficient corresponding inline citations. (September 2012) |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/3/3d/Campbelldiagram.png/220px-Campbelldiagram.png)
A Campbell diagram plot represents a system's response spectrum as a function of its oscillation regime. It is named for Wilfred Campbell, who introduced the concept.[1][2] It is also called an interference diagram.[3]
In rotordynamics
[edit]In rotordynamical systems, the eigenfrequencies often depend on the rotation rates due to the induced gyroscopic effects or variable hydrodynamic conditions in fluid bearings. It might represent the following cases:
![](http://upload.wikimedia.org/wikipedia/commons/thumb/8/88/Campbell_Diagram.png/290px-Campbell_Diagram.png)
- Analytically computed values of eigenfrequencies as a function of the shaft's rotation speed. This case is also called "whirl speed map".[4] Such a chart can be used in turbine design.
- Experimentally measured vibration response spectrum as a function of the shaft's rotation speed (waterfall plot), the peak locations for each slice usually corresponding to the eigenfrequencies.
In acoustical engineering
[edit]In acoustical engineering, the Campbell diagram would represent the pressure spectrum waterfall plot vs the machine's shaft rotation speed (sometimes also called 3D noise map).
References
[edit]- ^ Campbell, Wilfred (1924). "Protection of Steam Turbine Disk Wheels from Axial Vibration". Transactions of the ASME: 31–160.
- ^ Meher-Homji, Cyrus B.; Erik Prisell (2005). "Dr. Max Bentele---Pioneer of the Jet Age". Journal of Engineering for Gas Turbines and Power. 127 (2): 231–239. doi:10.1115/1.1807412. Archived from the original on 2013-02-23. Retrieved 2010-07-27.
- ^ Nelson, F. C. (2007). "Rotor dynamics without equations" (PDF). International Journal of COMADEM. 10 (3): 2. Archived from the original (PDF) on 2015-09-24. Retrieved 2012-10-01.
- ^ Logan, Earl Jr (2003-05-01). Handbook of Turbomachinery (Mechanical Engineering, No. 158) (2 ed.). CRC Press. ISBN 978-0-8247-0995-2.