Combined Charging System
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/5f/CCS1_charging_connector.jpg/220px-CCS1_charging_connector.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/fe/BMW_i3_charging_inlet_port_03_2022_4739.jpg/220px-BMW_i3_charging_inlet_port_03_2022_4739.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/bd/Iec-type2-ccs-combo2-and-iec-type2-charging-connectors-side-by-side.jpg/220px-Iec-type2-ccs-combo2-and-iec-type2-charging-connectors-side-by-side.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/3/34/Type2_CCS_Bmw_i3.jpg/220px-Type2_CCS_Bmw_i3.jpg)
The Combined Charging System (CCS) is a standard for charging electric vehicles. It can use Combo 1 (CCS1) or Combo 2 (CCS2) connectors to provide power at up to 350 kilowatts (kW) (max 500 A).[1] These two connectors are extensions of the IEC 62196 Type 1 and Type 2 connectors, with two additional direct current (DC) contacts to allow high-power DC fast charging. In response to demand for faster charging, 400 kW CCS chargers have been deployed by charging networks and 700 kW CCS chargers have been demonstrated.
The Combined Charging System allows AC charging using the Type 1 and Type 2 connector depending on the geographical region. This charging environment encompasses charging couplers, charging communication, charging stations, the electric vehicle and various functions for the charging process such as load balancing and charge authorization.
Electric vehicles or electric vehicle supply equipment (EVSE) are CCS-capable if they support either AC or DC charging according to the standards listed by the CCS. Automobile manufacturers that support CCS include BMW, Daimler, FCA, Jaguar, Groupe PSA, Honda, Hyundai, Kia, Mazda, MG, Nissan, Polestar, Renault, Rivian, Tesla, Mahindra, Tata Motors and Volkswagen Group,[2][3] as well as Ford and General Motors through the 2024 model year for their North American EVs.[4]
Competing charging systems for high-power DC charging include CHAdeMO (widely used in Japan, previously used in North America and Europe)[5] GB/T (China),[6] and the North American Charging Standard developed by Tesla.[7]
History
[edit]The revival of interest in electric cars spurred deployment of charging stations. Initially, these accessed the abundant AC mains electricity using a variety of plugs around the world. The standardization in IEC 62196 for higher-current charging connectors brought about various systems: Type 1 was used primarily in North America and Japan, and Type 2 variants elsewhere. For DC charging, the SAE and European Automobile Manufacturers Association (ACEA) made a plan to add common DC wires to the existing AC connector types such that there would be only one "global envelope" that fitted all DC charging stations.[8]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/fe/CCSCombo2.svg/220px-CCSCombo2.svg.png)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/6/64/720_kW_ccs_charger.jpg/220px-720_kW_ccs_charger.jpg)
The proposal for a "Combined Charging System" (CCS) was published at the 15th International VDI-Congress (Association of German Engineers) on 12 October 2011 in Baden-Baden. CCS defines a single connector pattern on the vehicle side that offers enough space for a Type 1 or Type 2 connector, along with space for a two-pin DC connector allowing charging at up to 200 amps. Seven car makers (Audi, BMW, Daimler, Ford, General Motors, Porsche and Volkswagen) agreed in late 2011 to introduce CCS in mid-2012.[9][10] In May 2012, ACEA endorsed the standardization of the Combo 2 connector across the European Union.[11] ACEA were joined later that month by the European Association of Automotive Suppliers (CLEPA) and The Union of the Electricity Industry (EURELECTRIC).[12] Also that month, prototype implementations for up to 100 kW were shown at EVS26 in Los Angeles.[13] DC charging specifications in the IEC 62196-3 draft give a range up to 125 A at up to 850 V.[14]
The seven auto makers also agreed to use HomePlug GreenPHY as the communication protocol.[15] The prototype for the matching plug was developed by Phoenix Contact with the goal to withstand 10,000 connect cycles.[16] The standardization proposal was sent to the IEC in January 2011.[17] The request to use a PLC protocol for the Vehicle2Grid communication was made in September 2009 in a joint presentation of BMW, Daimler and VW at a California Air Resources Board ZEV Technology Symposium.[18] This competed with the CAN bus proposal from Japan (including CHAdeMO) and China (GB/T 20234.3, a separate DC connector standard), and none of their car manufacturers has signed up to CCS. However, China had been involved in early stages of the development of the extra DC pins.[16]
Volkswagen built the first public CCS quick-charge station providing 50 kW DC in Wolfsburg in June 2013 to test drive the VW E-Up that was to be delivered with a DC rapid charger connector for CCS.[19] Two weeks later, BMW opened its first CCS rapid charge station to support the BMW i3.[20] Since at least the second EV World Summit in June 2013, the CHAdeMO association, Volkswagen and Nissan all advocate multi-standard DC chargers, as the additional cost of a dual-protocol station is only 5%.[21]
Since 2014 the European Union has required the provision of Type 2 or Combo 2 within the European electric vehicle charging network.
In Germany, the Charging Interface Initiative e. V. (CharIN) was founded by car makers and suppliers (Audi, BMW, Daimler, Mennekes, Opel, Phoenix Contact, Porsche, TÜV SÜD and Volkswagen) to promote the adoption of CCS. They noted in a press release that most cars cannot charge faster than 50 kW, so that was the first common power output of CCS stations to be built during 2015. The next step was the standardization of stations with 150 kW output that they showed in October 2015, looking to a future system with 350 kW output.[22] Volvo joined CharIN in 2016;[23] Tesla in March 2016;[24] Lucid Motors (previously Atieva) June 2016;[25] Faraday Future June 2016; Toyota in March 2017.[26]
In the United States, BMW and VW claimed in April 2016 that the East Coast and West Coast corridors had "complete" CCS networks.[27] As part of the 2016 settlement of the Volkswagen emissions scandal, VW committed to spend US$2 billion in the United States over the following 10 years on CCS and other charging infrastructure through subsidiary company Electrify America.[28] In this effort, charging stations would be built with up to 150 kW at community-based locations and with up to 350 kW at highway locations. Besides CCS, CHAdeMO charging stations were to be constructed.[29]
In November 2016, Ford, Mercedes, Audi, Porsche and BMW announced they would build a 350 kW (up to 500 A and 920 V) charge network (IONITY) with 400 stations in Europe,[30] at a cost of €200,000 ($220,000) each.[31] Most electric cars have a battery pack voltage below 400 volts. With a maximum charge current of 500 A, up to 220 kW charging is possible.
EVSE manufacturers offer CCS chargers capable of outputs beyond 350 kW. The Terra 360[32] from ABB supports up to 360 kW charging.
CCS chargers capable of 400 kW charging include:
- The Axon Easy 400[33] from Ekoenergetyka
- The HYC400[34][35] from Alpitronic
- The Troniq High Power[36] from EVBox
- The Raption 400 HPC[37] from Circontrol
- The 400 kW DP + 600 kW PC[38] from SK Signet
- The Liquid Cooled Satellite[39][40] from Kempower
In October 2019, Repsol deployed 400 kW CCS chargers near the A-8 motorway at Abanto-Zierbena, Biscay, Spain.[41]
In May 2022, EUROLOOP announced 720 kW charger WILLBERT Amber II S-HUB to be deployed in 2023 across Belgium.[42]
In December 2022, Fastned deployed EVBox Troniq High Power 400 kW chargers in De Watering, The Netherlands, along the A8 near Oostzaan as part of its charging network.[43]
In April 2023, Nxu demonstrated a battery-backed, 700 kW CCS charger[44] in Mesa, Arizona.
In May 2023, Shell opened a new station[45] with 400 kW Kempower chargers in Lonelier outside Kristiansand, Norway.
In June 2023, XC Power opened a new Recharge Station with QiOn Technology at Supercool Mobility Centers, a group of chargers with main power up to 990 kW with non-cooled CCS1 (up to 240 kW), and a charging station with liquid cooling system, up to 990 kW in Puebla City, Mexico. [46]
In first half of 2023, both Ford and General Motors announced that they would transition their North American EV lines from CCS1 to the NACS charge connector beginning with the 2025 model year.[4] These company moves to a competing charging standard prompted a response from the Charging Interface Initiative (CharIN) association, which promotes the CCS standard. They pointed out in June 2023 that "NACS is not a published or recognized standard by any standards body. For any technology to become a standard it has to go through due process in a standards development organization, such as ISO, IEC, and/or SAE."[47]
Technical design
[edit]![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/72/Electric_car_charging_%28ACEA_terminology%29.svg/400px-Electric_car_charging_%28ACEA_terminology%29.svg.png)
Versions of the specifications
[edit]The Combined Charging System is meant to develop with the needs of the customer. Version 1.0 covered the currently common features of AC and DC charging, and version 2.0 addressed the near to midterm future. The specifications and underlying standards for CCS 1.0 and CCS 2.0 are described for DC charging in Table 1[citation needed] and for AC charging in Table 2.[48]
The automotive manufacturers supporting CCS committed themselves to migrate to CCS 2.0 in 2018.[citation needed] Thus it is recommended for charging station manufacturers to also support CCS 2.0 from 2018 onwards.
The specifications of CCS 3.0 were not yet precisely defined[as of?]. All features of previous versions shall be preserved to ensure backward compatibility. Potential additional features include:[citation needed]
- Reverse power transfer
- Inductive charging
- Wireless charging communication
- Bus charging with "pantograph" current collector
Charging communication
[edit]Unlike the connector and inlet, which depend on the geographical location, the charging communication is the same around the globe. Generally two types of communication can be differentiated.
- Basic signaling (BS) is done using a pulse-width modulation (PWM) signal which is transferred over the control pilot (CP) contact according to IEC 61851-1. This communication is used for safety-related functions, indicating for example if the connector is plugged in, before contacts are made live (or energized) and if both charging station and electric vehicle are ready for charging. AC charging is possible using the PWM signal only. In this case the charging station uses the duty cycle of the PWM to inform the onboard charger of the maximum available current at the charging station (A pulse width of 5% indicates that HLC shall be used).
- High-level communication (HLC) is done by modulating a high-frequency signal over the CP contact (also known as Power Line Communication or PLC) to transfer more complex information, which may be used e.g. for DC charging or for other services such as "plug and charge" or load balancing. High-level communication is based on the standard DIN SPEC 70121 and the ISO/IEC 15118-series.
Load balancing
[edit]CCS differentiates between two methods of load balancing.[citation needed]
- Reactive load balancing allows changing the energy flow from Electric Vehicle Supply Equipment (EVSE) to EV instantaneously to a specific limit.
- Scheduled load balancing supports reactive load balancing and additionally a planning of the energy flow from EVSE to EV with e.g. different power limits and cost indicators over time. It may for example be used to optimize energy distribution in a smart grid.
Charging authorization modes
[edit]For charge authorization, generally two approaches are foreseen.[by whom?]
- With "plug and charge", the user plugs in their vehicle and an automated authentication and authorization process is started without any further user interaction. Payment is performed automatically.
- With "external payment", the user has to identify with an RFID card at the terminal, or conduct a payment with a payment card, before they can proceed with charging.
Vehicle coupler
[edit]The vehicle coupler is composed of the vehicle connector, which is mounted at the end of a flexible cable, and the vehicle inlet, the counterpart of the connector, which is located within the vehicle. The CCS couplers were based on the Type 1 coupler, the North American standard, and Type 2 coupler, the European standard, as described in IEC 62196-2. One of the challenges of the Combined Charging System was to develop a vehicle inlet which is compatible with both the existing AC vehicle connectors and additional DC contacts. For both Type 1 and Type 2 this has been accomplished by extending the inlet with two additional DC contacts below the existing AC and communication contacts. The resulting new configurations are commonly known as Combo 1 and Combo 2.
For the DC vehicle connector, the implementation varies slightly between Combo 1 and Combo 2. In the case of Combo 1 the connector is extended by two DC contacts, while the Type 1 portion of the connector remains the same with the AC contacts (L1 & N) being unused. For Combo 2 the AC contacts (L1, L2, L3 & N) are completely removed from the connector and therefore the Type 2 portion of the connector has only three contacts remaining – two communication contacts and a protective earth. The vehicle inlet may retain AC contacts to allow non-CCS AC charging.
In both cases, communication and protective earth functions are covered by the original Type 1 or 2 portion of the connector. The Type 1 and Type 2 connectors are described in IEC 62196-2, while the Combo 1 and Combo 2 connectors are described in IEC 62196-3 as Configurations EE and FF.[citation needed]
Cable connector | |||
---|---|---|---|
Type 1 | Combo 1 | ||
Vehicle inlet | Type 1 | AC charging, single phase |
Does not mate |
Combo 1 | DC charging |
Cable connector | |||
---|---|---|---|
Type 2 | Combo 2 | ||
Vehicle inlet | Type 2 | AC charging, single phase or three phase |
Does not mate |
Combo 2 | DC charging |
High-power charging
[edit]As vehicle couplers for DC charging according to IEC 62196-3:2014 Ed.1 allow DC charging only with currents up to 200 A, they do not sufficiently cover the needs of the future charging infrastructure. Consequently, a later edition of the standard supports currents of up to 500 A. Such high currents, however, either require large cable cross-sections, leading to heavy and stiff cables, or require cooling if thinner cables are desired. In addition, contact resistance leads to more heat dissipation. To cope with these technical issues, the standard IEC TS 62196-3-1 describes the requirements for high-power DC couplers including thermal sensing, cooling and silver-plating of contacts.[49] CharIN are investigating versions over 2 MW for electric trucks, and equipment is being tested.[50][51]
Competition for global acceptance
[edit]The Combined Charging System is primarily driven by European and North American car manufacturers. Type 1 and Combo 1 chargers are primarily found in North and Central America, Korea and Taiwan, while Type 2 and Combo 2 can be found in Europe, South America, South Africa, Arabia, India, Singapore, Taiwan, Hong Kong, Oceania and Australia. For DC charging the competing standard GB/T 20234-2015 is used in China, while Japan uses CHAdeMO.
In the European Union, according to Directive 2014/94/EU[52] all high-power DC charging points installed after November 18, 2017, were to be equipped for interoperability purposes at least with Combo 2 connectors.[citation needed] However, this does not prohibit the provision of other charging points using e.g. CHAdeMO or AC Rapid.
The majority[53] of EVs sold in the United States are made by Tesla and therefore do not natively support CCS charging, but instead used the proprietary Tesla connector from the early-2010s through 2022, though newer Tesla cars also support CCS with a separately sold adapter.[54] In November 2022, Tesla renamed its previously proprietary charging connector to the North American Charging Standard (NACS), making the specifications available to other EV manufacturers and allowing it to support the same signalling standard as CCS.[55][56][57][58]
In 2023, Ford Motor Company, General Motors, and Rivian announced that they would use NACS instead of CCS connectors on all future North American BEV models. Vehicles will initially come with an adapter in 2024, but new models starting from 2025 will be built with native NACS ports.[59][60][61]
Subsequently, other EV companies signed agreements for native NACS adoption, including Aptera, BMW Group, Fisker, Honda, Hyundai Motor Group, Jaguar, Lucid, Mercedes-Benz, Nissan, Polestar, Subaru, Toyota, and Volvo. Many major charging networks and charging equipment suppliers also announced support for NACS, including EVgo, FLO, ABB E-Mobility, and EverCharge. NACS was subsequently ratified internationally as standard SAE J3400.
This has led to predictions that CCS1 will soon be obsolete, as it is bigger, heavier and more expensive than NACS.[62][63][64][65][66]
As a result, Hilton Worldwide announced an agreement with Tesla to install 20,000 EVSEs across 2,000 of its properties in North America by 2025.[67]
In many other countries no standard is preferred yet, although CharIN recommended advanced Type 2 and Combo 2 in 2018.[68]
References
[edit]- ^ "CCS HPC350 power class-voltage and current range". 2019-10-01. Retrieved 2023-05-28.
- ^ "Tesla Model 3 could set the charging standard for electric vehicles". Electrek. 12 April 2017. Retrieved 18 July 2017.
- ^ "IONIQ Electric - Complete Hyundai Walkthrough Videos On Its 110 Mile EV".
- ^ a b Lambert, Fred (9 June 2023). "Tesla's NACS enjoys domino effect as EV charging companies adopt the standard". Electrek. Retrieved 10 June 2023.
- ^ Gaton, Bryce (December 21, 2022). "Tesla launches new EV charging battle, but the Plug War is already over". The Driven. Retrieved June 15, 2023.
- ^ Gene (October 16, 2017). "Tesla updates Model S/X charge port to support China's charging standard". TESLARATI. Retrieved June 15, 2023.
- ^ Bhargava, Hemant; Boehm, Jonas; Parker, Geoffrey G. (27 January 2021). "How Tesla's Charging Stations Left Other Manufacturers in the Dust". Harvard Business Review. Retrieved 27 June 2021.
- ^ a b "ACEA position and recommendations for the standardization of the charging of electrically chargeable vehicles" (PDF). ACEA – European Automobile Manufacturers Association. 2011-03-02. Archived (PDF) from the original on 2012-12-02.
- ^ "Universal charging for electric cars". Auto123.com. 2011-11-15.
- ^ "Seven Auto Manufacturers Collaborate on Harmonized Electric Vehicle Fast Charging Solution". Ford. Archived from the original on 2012-03-08. Retrieved 2012-04-09.|
- ^ "[Updated] ACEA position and recommendations for the standardization of the charging of electrically chargeable vehicles" (PDF) (Press release). European Automobile Manufacturers' Association. 4 May 2012. Retrieved 16 August 2021.
- ^ "ACEA, CLEPA and EURELECTRIC promote single standard for charging electrically-chargeable vehicles" (PDF) (Press release). European Automobile Manufacturers' Association. 25 May 2012. Retrieved 16 August 2021.
- ^ "Weltweit tätige Automobilhersteller zeigen Schnellladen an Elektrofahrzeugen auf der EVS26". Volkswagen AG. 2012-05-03. Archived from the original on 2012-12-17. Retrieved 2012-05-08.
- ^ "Solutions for E-Mobility" (PDF). Phoenix Contact. 2013. Archived from the original (PDF) on 2016-03-04. Retrieved 2015-10-08.
- ^ "Seven Automakers Agree On Combined EV Charging System". 2011-10-12. Archived from the original on 2014-02-01. Retrieved 2012-04-09.
- ^ a b "E-Mobility "Two In One"". EuE24. April 2012. Interview with Phoenix Contact. Archived from the original on 2014-02-03. Retrieved 2012-04-09.
- ^ "Combined Charging: das universelle Ladesystem für Elektrofahrzeuge wird erstmals an Fahrzeugen deutscher Hersteller gezeigt". BMW Group. 2011-10-11. Retrieved 2012-04-09.
- ^ "BMW, Daimler and VW Propose Global e-mobility Standardization on Vehicle2Grid Communication, Harmonization of Chargers". 2009-09-26. Retrieved 2012-04-09.
- ^ "Erste öffentliche 50 KW DC Schnellladesäule auf der e-Mobility-Station in Wolfsburg eingeweiht". Landesinitiative Elektromobilität Niedersachsen. 2013-06-20. Archived from the original on 2013-06-27. Retrieved 2013-07-09.
- ^ "Schnellladestation an der BMW Welt eröffnet". BMW Group. 2013-07-04. press release. Retrieved 2013-07-09.
- ^ "2013 World EV Summint in Norway – Chademo, Nissan and Volkswagen align on promoting multi-standard fast chargs to accelerate infrastructure deployment and EV adoption" (PDF). Chademo Association Europe. 2013-06-11. Archived from the original (PDF) on 2013-09-25. Retrieved 2013-07-09.
- ^ "CharIN e. V. demonstrates the next level of electric vehicle fast charging" (PDF). 2015-10-14. Retrieved 2015-12-14.[permanent dead link]
- ^ "Volvo Cars ger en känga åt Tesla". Archived from the original on 2016-03-18. Retrieved 2016-03-15.
- ^ "CharIN e. V. welcomes member Tesla Motors". 2016-11-09.
- ^ "CharIN e. V. welcomes Atieva Inc". 2016-11-09.
- ^ "Toyota Motor Europe joins CharIN e.V." CharIN. Retrieved 31 March 2017.
- ^ "DC fast-charging in east, west coast corridors done, say VW, BMW". Green Car Reports. 14 September 2016. Retrieved 20 April 2019.
- ^ "Volkswagen Dieselgate Settlement Includes $2 Billion Investment Towards Electric Cars".
- ^ "Our Plan". electrify america. Retrieved 16 July 2018.
- ^ "5 major automakers join forces to deploy 400 ultra-fast (350 kW) charging stations for electric vehicles in Europe". Electrek. 2016-11-29. Retrieved 2016-11-29.
- ^ "Carmakers plan 400 Europe car charging stations by 2020". Reuters. 2017-03-11. Retrieved 2018-05-04.
- ^ "Terra 360". Retrieved 2023-06-24.
- ^ "Axon Easy 400 - DC Charging Station All-in-One".
- ^ "HYC400 - hypercharger". Retrieved 2023-06-24.
- ^ "HYC400". YouTube. 26 April 2023. Retrieved 2023-06-24.
- ^ "EVBox Troniq High Power". Retrieved 2023-06-24.
- ^ "Raption 400 HPC". Retrieved 2023-06-24.
- ^ "SK Signet 400kW DP + 600kW PC". Retrieved 2023-06-24.
- ^ "Kempower Liquid Cooled Satellite". Kempower. Retrieved 27 June 2023.
- ^ "Kempower boosts the electrification of heavy-duty vehicles by launching liquid-cooled satellite charger". Kempower. Retrieved 27 June 2023.
- ^ "Repsol Launches The Most Powerful Charging Station In Europe: 400 kW". InsideEVs. 2019-10-08. Retrieved 2023-06-24.
- ^ "EUROLOOP on LinkedIn: #ev #evcharging #dccharging #fastcharger #sustainablitity". www.linkedin.com. Retrieved 2023-07-17.
- ^ "Fastned and EVBox join forces to install one of the first 400 kW EV fast chargers in Europe". FastNed. 2022-12-21. Retrieved 2023-06-24.
- ^ "Nxu Mobile 700kW DC Fast Charger! Initial Stress Test Day Of This Insanely High Power Unit". Out of Spec Reviews. 2023-04-26. Retrieved 2023-06-24.
- ^ Nyland, Bjørn (27 June 2023). "Brand new Shell Lohnelier with 2400 kW Kempower charging, PV and more". YouTube. Retrieved 2023-06-27.
- ^ "Inauguran en México la estación de carga más veloz del mundo para autos eléctricos". Forbes (in Spanish). Retrieved 2024-06-25.
- ^ "Ford Switch To Tesla Charging Standard Annoys CCS Alliance". InsideEVs. Retrieved 2023-06-19.
- ^ "Combined Charging System Specification". 2017-09-26. Archived from the original on 2018-02-12. Retrieved 2017-11-17.
- ^ "IEC - SC 23H Dashboard > Projects / Publications: Work programme, Publications, Stability Dates, Project files". www.iec.ch. Retrieved 2023-08-22.
- ^ "CharIN Develops Super Powerful Charger With Over 2 MW Of Power". InsideEVs. 26 September 2019. Archived from the original on 11 August 2020.
- ^ "NREL & CharIN Test Out Megawatt Charging System In USA". CleanTechnica. 13 October 2020. Archived from the original on 16 October 2020.
- ^ Directive 2014/94/EU (on the deployment of alternative fuels infrastructure) (Report). European Parliament. 22 October 2014.
Appendix II … Technical specifications for recharging points … Direct current (DC) high power recharging points for electric vehicles shall be equipped, for interoperability purposes, at least with connectors of the combined charging system 'Combo 2' as described in standard EN 62196-3.
- ^ "Kelley Blue Book Electric Vehicle Sales Report for Q4, 2022" (PDF). 16 January 2023.
- ^ Directive 2014/94/EU (on the deployment of alternative fuels infrastructure) (Report). European Parliament. 22 October 2014. Retrieved 2022-07-07.
Appendix II … Technical specifications for recharging points … Direct current (DC) high power recharging points for electric vehicles shall be equipped, for interoperability purposes, at least with connectors of the combined charging system 'Combo 2' as described in standard EN 62196-3.
- ^ Shakir, Umar (11 November 2022). "Tesla opens up its charging connector in a bid to become the North American standard". The Verge. Retrieved 5 December 2022.
- ^ Lambert, Fred (11 November 2022). "Tesla opens its EV charge connector in the hope of making it the new standard". Electrek. Retrieved 5 December 2022.
- ^ "Tesla Aims To Fix American EV Charging Infrastructure With The North American Charging Standard". MSN. 11 November 2022. Retrieved 5 December 2022.
- ^ "Opening the North American Charging Standard" (Press release). US: Tesla. 11 November 2022. Retrieved 5 December 2022.
- ^ Halvorson, Bengt (25 May 2023). "Ford adopts Tesla charge port for future EVs". Green Car Reports. Retrieved 27 May 2023.
- ^ Wayland, Michael (2023-06-08). "GM to use Tesla charging network, joining Ford in leveraging the EV leader's tech". CNBC. Retrieved 2023-06-19.
- ^ "Rivian Accelerates Electrification through Adoption of North American Charging Standard and Access to Tesla's Supercharger Network for Rivian Drivers". www.businesswire.com. 2023-06-20. Retrieved 2024-03-18.
- ^ Agatie, Cristian (2023-06-11). "The CCS Charging Standard Is on Life Support, Only Federal Subsidies Are Keeping It Alive". autoevolution. Retrieved 2023-08-22.
- ^ "In Two Weeks, Tesla, Ford, And GM May Have Killed The CCS1 Charging Standard". InsideEVs. Retrieved 2023-08-22.
- ^ Templeton, Brad. "GM joins Ford To Switch To Tesla Charging, Killing CCS. Should Tesla Just Run All Charging?". Forbes. Retrieved 2023-08-22.
- ^ Johnson, William (2022-11-19). "Sandy Munro analyzes Tesla charging connector: 'lighter, more cost efficient'". TESLARATI. Retrieved 2023-08-22.
- ^ George, Patrick (2023-10-06). "Hyundai Just Handed Tesla The Win In The Charging Wars". Inside EVs. Retrieved 2023-10-06.
- ^ "Tesla to Supply Hilton Hotels with 20,000 EV Chargers by 2025 - BNN Bloomberg". 7 September 2023.
- ^ "CharIN Worldmap" (PDF).
External links
[edit]- Charging Interface Initiative (CharIN)