eNodeB
![]() | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages)
|
E-UTRAN Node B, also known as Evolved Node B (abbreviated as eNodeB or eNB), is the element in E-UTRA of LTE that is the evolution of the element Node B in UTRA of UMTS. It is the hardware that is connected to the mobile phone network that communicates directly wirelessly with mobile handsets (UEs), like a base transceiver station (BTS) in GSM networks.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/7c/CableFree_LTE_Remote_Radio_Head_%28RRH%29.jpg/220px-CableFree_LTE_Remote_Radio_Head_%28RRH%29.jpg)
Traditionally, a Node B has minimum functionality, and is controlled by a Radio Network Controller (RNC). However, with an eNB, there is no separate controller element. This simplifies the architecture and allows lower response times.
Differences between an evolved Node B and a Node B
[edit]Air interface
[edit]eNB uses the E-UTRA protocols OFDMA (downlink) and SC-FDMA (uplink) on its LTE-Uu interface. By contrast, NodeB uses the UTRA protocols WCDMA or TD-SCDMA on its Uu interface.
Control functionality
[edit]eNB embeds its own control functionality, rather than using a RNC (Radio Network Controller) as does a Node B.
Network interfaces
[edit]eNB interfaces with the System Architecture Evolution (SAE) core (also known as Evolved Packet Core (EPC)) and other eNB as follows:[1]
- eNB uses the S1-AP protocol on the S1-MME interface with the Mobility Management Entity (MME) for control plane traffic.
References
[edit]- ^ 3GPP TS 36.300 V11.0.0 (2011-12)