iMac (24-inch, M1, 2021, Four ports) Camera and Embedded DisplayPort Flex Cable
Before You Begin
Remove the following parts before you begin:
Tools
Nylon probe (black stick)
Support wedges
![](https://cdsassets.apple.com/live/SZLF0YNV/service-documentation/ssr/imac-24-m1-2021-4-ports-j456/100699-camera-and-edp/000_RP1723_DP_Hub_Cable_Locator_V4.jpg)
Removal
Position the housing with the back facedown and the top closest to you.
Pull the tab to flip up the locking bar on the camera and embedded DisplayPort (eDP) flex cable (1).
Slide the end of the camera and eDP flex cable straight out of the connector to remove it from the housing (2).
Reassembly
Slide the end of the camera and eDP flex cable into the connector (1). Then flip down the locking bar (2).
Reinstall the following parts to complete reassembly:
Published Date: