Smooth and finish surfaces of poured concrete, such as floors, walks, sidewalks, roads, or curbs using a variety of hand and power tools. Align forms for sidewalks, curbs, or gutters; patch voids; and use saws to cut expansion joints.
- Cement Finisher
- Cement Mason
- Concrete Finisher
|
- Concrete Mason
- Finisher
- Mason
|
![Show all](/https/www.onetcodeconnector.org/image/more.png) 5 of 10 displayed
![Show fewer](/https/www.onetcodeconnector.org/image/less.png) All 10 displayed
|
![Show all](/https/www.onetcodeconnector.org/image/more.png) 5 of 26 displayed
- Apply hardening and sealing compounds to cure surface of concrete, and waterproof or restore surface.
- Apply muriatic acid to clean surface, and rinse with water.
- Build wooden molds, and clamp molds around area to be repaired, using hand tools.
- Check the forms that hold the concrete to see that they are properly constructed.
- Chip, scrape, and grind high spots, ridges, and rough projections to finish concrete, using pneumatic chisels, power grinders, or hand tools.
![Show fewer](/https/www.onetcodeconnector.org/image/less.png) All 26 displayed
- Apply hardening and sealing compounds to cure surface of concrete, and waterproof or restore surface.
- Apply muriatic acid to clean surface, and rinse with water.
- Build wooden molds, and clamp molds around area to be repaired, using hand tools.
- Check the forms that hold the concrete to see that they are properly constructed.
- Chip, scrape, and grind high spots, ridges, and rough projections to finish concrete, using pneumatic chisels, power grinders, or hand tools.
- Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven.
- Cut metal division strips, and press them into terrazzo base so that top edges form desired design or pattern.
- Cut out damaged areas, drill holes for reinforcing rods, and position reinforcing rods to repair concrete, using power saw and drill.
- Direct the casting of the concrete and supervise laborers who use shovels or special tools to spread it.
- Fabricate concrete beams, columns, and panels.
- Install anchor bolts, steel plates, door sills and other fixtures in freshly poured concrete or pattern or stamp the surface to provide a decorative finish.
- Mix cement, sand, and water to produce concrete, grout, or slurry, using hoe, trowel, tamper, scraper, or concrete-mixing machine.
- Mold expansion joints and edges, using edging tools, jointers, and straightedge.
- Monitor how the wind, heat, or cold affect the curing of the concrete throughout the entire process.
- Operate power vibrator to compact concrete.
- Polish surface, using polishing or surfacing machine.
- Produce rough concrete surface, using broom.
- Push roller over surface to embed chips in surface.
- Set the forms that hold concrete to the desired pitch and depth, and align them.
- Signal truck driver to position truck to facilitate pouring concrete, and move chute to direct concrete on forms.
- Spread roofing paper on surface of foundation, and spread concrete onto roofing paper with trowel to form terrazzo base.
- Spread, level, and smooth concrete, using rake, shovel, hand or power trowel, hand or power screed, and float.
- Sprinkle colored marble or stone chips, powdered steel, or coloring powder over surface to produce prescribed finish.
- Waterproof or restore concrete surfaces, using appropriate compounds.
- Wet concrete surface, and rub with stone to smooth surface and obtain specified finish.
- Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth, using trowel.
![Show all](/https/www.onetcodeconnector.org/image/more.png) 5 of 26 displayed
- Apply decorative masonry finishes.
- Apply material to fill gaps in surfaces.
- Apply sealants or other protective coatings.
- Break up rock, asphalt, or concrete.
- Build construction forms or molds.
![Show fewer](/https/www.onetcodeconnector.org/image/less.png) All 26 displayed
- Apply decorative masonry finishes.
- Apply material to fill gaps in surfaces.
- Apply sealants or other protective coatings.
- Break up rock, asphalt, or concrete.
- Build construction forms or molds.
- Clean surfaces in preparation for work activities.
- Compact materials to create level bases.
- Cut metal components for installation.
- Direct construction or extraction personnel.
- Drill holes in construction materials.
- Fabricate parts or components.
- Finish concrete surfaces.
- Inspect completed work to ensure proper installation.
- Install building fixtures.
- Install masonry materials.
- Install metal structural components.
- Install roofing materials.
- Mix substances or compounds needed for work activities.
- Monitor construction operations.
- Position construction forms or molds.
- Position structural components.
- Pour materials into or on designated areas.
- Prepare surfaces for finishing.
- Signal equipment operators to indicate proper equipment positioning.
- Smooth surfaces with abrasive materials or tools.
- Spread concrete or other aggregate mixtures.
![Show all](/https/www.onetcodeconnector.org/image/more.png) 4 of 39 displayed
- Advanced Builder (Navy - Enlisted)
- Assistant Public Works Officer (Navy - Commissioned or Warrant Officer)
|
- Material Maintenance Specialty (Coast Guard - Warrant Officer only)
- Officer in Charge, Naval Construction Battalion Unit (Navy - Commissioned or Warrant Officer)
|
![Show fewer](/https/www.onetcodeconnector.org/image/less.png) All 39 displayed
- Advanced Builder (Navy - Enlisted)
- Assistant Public Works Officer (Navy - Commissioned or Warrant Officer)
- Basic Engineer, Construction, and Equipment Marine (Marine Corps - Enlisted)
- Bridge Crewmember (Army - Enlisted)
- Builder (Navy - Enlisted)
- Builder - Concrete (Coast Guard - Enlisted)
- Carpentry and Masonry Specialist (Army - Enlisted)
- Combat Engineer (Army - Enlisted)
- Combat Engineer (Marine Corps - Enlisted)
- Combat Engineer Officer (Marine Corps - Commissioned Officer only)
- Concrete and Asphalt Equipment Operator (Army - Enlisted)
- Construction Engineering Technician (Army - Warrant Officer only)
- Constructionman (Navy - Enlisted)
- Conversion NEC BU Builder Basic (Navy - Enlisted)
- Damage Controlman (Coast Guard - Enlisted)
- Facilities Construction/Facilities Services Officer (Navy - Commissioned or Warrant Officer)
- Facilities Engineering Officer (Navy - Commissioned or Warrant Officer)
- Heavy Repair Superintendent (Air Force - Enlisted)
- Maintenance Technician (Navy - Enlisted)
- Mason (Army - Enlisted)
|
- Material Maintenance Specialty (Coast Guard - Warrant Officer only)
- Officer in Charge, Naval Construction Battalion Unit (Navy - Commissioned or Warrant Officer)
- Pavements and Construction Equipment (Air Force - Enlisted)
- Pavements and Construction Equipment Apprentice (Air Force - Enlisted)
- Pavements and Construction Equipment Craftsman (Air Force - Enlisted)
- Pavements and Construction Equipment Helper (Air Force - Enlisted)
- Pavements and Construction Equipment Journeyman (Air Force - Enlisted)
- Public Works Officer (Navy - Commissioned or Warrant Officer)
- Structural (Air Force - Enlisted)
- Structural (Space Force - Enlisted)
- Structural Apprentice (Air Force - Enlisted)
- Structural Apprentice (Space Force - Enlisted)
- Structural Craftsman (Air Force - Enlisted)
- Structural Helper (Air Force - Enlisted)
- Structural Helper (Space Force - Enlisted)
- Structural Journeyman (Air Force - Enlisted)
- Structural Journeyman (Space Force - Enlisted)
- Utilities Officer (Marine Corps - Warrant Officer only)
- Wheeled Vehicle Mechanic (Army - Enlisted)
|
- Cement Mason (Alternate Title: Cement Mason Concrete Finisher)
- Cement Mason
- Cement-Mason Apprentice
|
- Concrete Rubber
- Concrete-Stone Finisher
|
|