Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.
- Die Setter
- Fabrication Operator
- Machine Operator
- Machine Setter
- Press Operator
|
- Punch Press Operator
- Saw Operator
- Set-Up Operator
- Slitter Operator
|
![Show all](/https/www.onetcodeconnector.org/image/more.png) 5 of 10 displayed
51-4023.00 |
Rolling Machine Setters, Operators, and Tenders, Metal and Plastic |
51-4033.00 |
Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
51-4034.00 |
Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
51-4035.00 |
Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic |
51-4081.00 |
Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
![Show fewer](/https/www.onetcodeconnector.org/image/less.png) All 10 displayed
51-4023.00 |
Rolling Machine Setters, Operators, and Tenders, Metal and Plastic |
51-4033.00 |
Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
51-4034.00 |
Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
51-4035.00 |
Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic |
51-4081.00 |
Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
51-4111.00 |
Tool and Die Makers |
51-4194.00 |
Tool Grinders, Filers, and Sharpeners |
51-7042.00 |
Woodworking Machine Setters, Operators, and Tenders, Except Sawing |
51-9022.00 |
Grinding and Polishing Workers, Hand |
51-9032.00 |
Cutting and Slicing Machine Setters, Operators, and Tenders |
|
![Show all](/https/www.onetcodeconnector.org/image/more.png) 5 of 32 displayed
- Adjust ram strokes of presses to specified lengths, using hand tools.
- Clean and lubricate machines.
- Clean work area.
- Examine completed workpieces for defects, such as chipped edges or marred surfaces and sort defective pieces according to types of flaws.
- Grind out burrs or sharp edges, using portable grinders, speed lathes, or polishing jacks.
![Show fewer](/https/www.onetcodeconnector.org/image/less.png) All 32 displayed
- Adjust ram strokes of presses to specified lengths, using hand tools.
- Clean and lubricate machines.
- Clean work area.
- Examine completed workpieces for defects, such as chipped edges or marred surfaces and sort defective pieces according to types of flaws.
- Grind out burrs or sharp edges, using portable grinders, speed lathes, or polishing jacks.
- Hand-form, cut, or finish workpieces, using tools such as table saws, hand sledges, or anvils.
- Hone cutters with oilstones to remove nicks.
- Install, align, and lock specified punches, dies, cutting blades, or other fixtures in rams or beds of machines, using gauges, templates, feelers, shims, and hand tools.
- Load workpieces, plastic material, or chemical solutions into machines.
- Lubricate workpieces with oil.
- Mark identifying data on workpieces.
- Measure completed workpieces to verify conformance to specifications, using micrometers, gauges, calipers, templates, or rulers.
- Operate forklifts to deliver materials.
- Place workpieces on cutting tables, manually or using hoists, cranes, or sledges.
- Plan sequences of operations, applying knowledge of physical properties of workpiece materials.
- Position guides, stops, holding blocks, or other fixtures to secure and direct workpieces, using hand tools and measuring devices.
- Position, align, and secure workpieces against fixtures or stops on machine beds or on dies.
- Preheat workpieces, using heating furnaces or hand torches.
- Read work orders or production schedules to determine specifications, such as materials to be used, locations of cutting lines, or dimensions and tolerances.
- Remove housings, feed tubes, tool holders, or other accessories to replace worn or broken parts, such as springs or bushings.
- Replace defective blades or wheels, using hand tools.
- Scribe reference lines on workpieces as guides for cutting operations, according to blueprints, templates, sample parts, or specifications.
- Select, clean, and install spacers, rubber sleeves, or cutters on arbors.
- Set blade tensions, heights, and angles to perform prescribed cuts, using wrenches.
- Set stops on machine beds, change dies, and adjust components, such as rams or power presses, when making multiple or successive passes.
- Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.
- Sharpen dulled blades, using bench grinders, abrasive wheels, or lathes.
- Start machines, monitor their operations, and record operational data.
- Test and adjust machine speeds or actions, according to product specifications, using gauges and hand tools.
- Thread ends of metal coils from reels through slitters and secure ends on recoilers.
- Turn controls to set cutting speeds, feed rates, or table angles for specified operations.
- Turn valves to start flow of coolant against cutting areas or to start airflow that blows cuttings away from kerfs.
![Show all](/https/www.onetcodeconnector.org/image/more.png) 5 of 35 displayed
- Adjust equipment controls to regulate coolant flow.
- Align parts or workpieces to ensure proper assembly.
- Apply lubricants or coolants to workpieces.
- Clean production equipment.
- Clean work areas.
![Show fewer](/https/www.onetcodeconnector.org/image/less.png) All 35 displayed
- Adjust equipment controls to regulate coolant flow.
- Align parts or workpieces to ensure proper assembly.
- Apply lubricants or coolants to workpieces.
- Clean production equipment.
- Clean work areas.
- Cut industrial materials in preparation for fabrication or processing.
- Disassemble equipment for maintenance or repair.
- Draw guide lines or markings on materials or workpieces using patterns or other references.
- Feed materials or products into or through equipment.
- Heat material or workpieces to prepare for or complete production.
- Inspect metal, plastic, or composite products.
- Inspect production equipment.
- Load materials into production equipment.
- Lubricate production equipment.
- Mark products, workpieces, or equipment with identifying information.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Monitor equipment operation to ensure that products are not flawed.
- Mount attachments or tools onto production equipment.
- Mount materials or workpieces onto production equipment.
- Operate cutting equipment.
- Operate forklifts or other loaders.
- Operate grinding equipment.
- Operate metal or plastic forming equipment.
- Plan production or operational procedures or sequences.
- Read work orders or other instructions to determine product specifications or materials requirements.
- Record operational or production data.
- Remove accessories, tools, or other parts from equipment.
- Replace worn equipment components.
- Review blueprints or other instructions to determine operational methods or sequences.
- Select production equipment according to product specifications.
- Set equipment controls to meet cutting specifications.
- Set equipment guides, stops, spacers, or other fixtures.
- Sharpen cutting or grinding tools.
- Smooth metal surfaces or edges.
- Sort materials or products for processing, storing, shipping, or grading.
![Show all](/https/www.onetcodeconnector.org/image/more.png) 4 of 21 displayed
- Advanced Machinery Repairman (Navy - Enlisted)
- Aircraft Structural Maintenance (Air Force - Enlisted)
|
- Low Observable Aircraft Structural Maintenance Helper (Air Force - Enlisted)
- Low Observable Aircraft Structural Maintenance Journeyman (Air Force - Enlisted)
|
![Show fewer](/https/www.onetcodeconnector.org/image/less.png) All 21 displayed
- Advanced Machinery Repairman (Navy - Enlisted)
- Aircraft Structural Maintenance (Air Force - Enlisted)
- Aircraft Structural Maintenance Apprentice (Air Force - Enlisted)
- Aircraft Structural Maintenance Craftsman (Air Force - Enlisted)
- Aircraft Structural Maintenance Helper (Air Force - Enlisted)
- Aircraft Structural Maintenance Journeyman (Air Force - Enlisted)
- Allied Trades Specialist (Army - Enlisted)
- Aviation Maintenance Technician (Coast Guard - Enlisted)
- Low Observable Aircraft Structural Maintenance (Air Force - Enlisted)
- Low Observable Aircraft Structural Maintenance Apprentice (Air Force - Enlisted)
- Low Observable Aircraft Structural Maintenance Craftsman (Air Force - Enlisted)
|
- Low Observable Aircraft Structural Maintenance Helper (Air Force - Enlisted)
- Low Observable Aircraft Structural Maintenance Journeyman (Air Force - Enlisted)
- Machinery Repairman (Navy - Enlisted)
- Machinery Repairman Apprentice (Navy - Enlisted)
- Machinery Repairman Journeyman (Navy - Enlisted)
- Machinery Technician (Coast Guard - Enlisted)
- Machinist (Marine Corps - Enlisted)
- Marine Safety Specialist Engineer (Coast Guard - Warrant Officer only)
- Naval Engineering Specialty (Coast Guard - Warrant Officer only)
- Rubber and Plastics Worker (Navy - Enlisted)
|
- Press Operator Heavy Duty
|
- Spring Coiling Machine Set
|
![Show all](/https/www.onetcodeconnector.org/image/more.png) 4 of 71 displayed
- Angle Shear Operator
- Arbor-Press Operator I
|
- Press Setter
- Profile Trimmer
|
![Show fewer](/https/www.onetcodeconnector.org/image/less.png) All 71 displayed
- Angle Shear Operator
- Arbor-Press Operator I
- Automobile-Bumper Straightener
- Banding-Machine Operator
- Bench-Shear Operator
- Bending-Machine Operator I
- Bending-Machine Operator II
- Beveler
- Brake Operator I
- Brake Operator II
- Center-Punch Operator
- Clearance Cutter
- Coil Shaper
- Contour-Band-Saw Operator, Vertical
- Corner Former
- Cut-Off Saw Tender, Metal
- Cut-Off-Machine Operator
- Cut-Off-Saw Operator, Metal
- Debridging-Machine Operator
- Die Set-Up Operator, Printed Circuit Boards
- Duplicator-Punch Operator
- Flying-Shear Operator
- Hammer Operator
- Ironworker-Machine Operator
- Jigsawyer
- Kick Press Setter
- Kick-Press Operator I
- Last Sawyer
- Metallic-Yarn-Slitting-Machine Operator
- Mottle-Lay-Up Operator
- Nibbler Operator
- Planisher
- Plate Slitter-And-Inspector
- Power-Press Tender
- Press Operator, Heavy Duty
- Press Operator, Pierce And Shave
|
- Press Setter
- Profile Trimmer
- Profile-Saw Operator
- Punch-Press Operator I
- Punch-Press Operator II
- Punch-Press Operator III
- Punch-Press Operator, Automatic
- Punch-Press Setter
- Rotary-Shear Operator
- Saw Operator
- Sawyer
- Scraper
- Screwmaker, Automatic
- Shear Operator I
- Shear Operator II
- Shear Setter
- Sintering-Press Operator
- Slasher
- Slat Twister
- Slitter Service and Setter
- Slitting-Machine Operator II
- Spring Coiling Machine Setter
- Spring Tester I
- Straightening-Press Operator II
- Strip-Metal-Punch-And-Straightener Operator
- Swage Tender
- Swaging-Machine Adjuster
- Trim-Machine Adjuster
- Trimmer, Printed Circuit Board Panels
- Tube Bender, Brass-Wind Instruments
- Tubing-Machine Tender
- Turret-Punch-Press Operator
- Turret-Punch-Press Operator, Tape-Control
- Twisting-Machine Operator
- Wire Coiner
|
|