Cut or carve stone according to diagrams and patterns.
- Carver
- Cutter
- Granite Cutter
- Polisher
- Sandblast Carver
|
- Sandblaster
- Stone Carver
- Stone Cutter
- Stone Fabricator
|
![Show all](/https/www.onetcodeconnector.org/image/more.png) 5 of 10 displayed
![Show fewer](/https/www.onetcodeconnector.org/image/less.png) All 10 displayed
|
![Show all](/https/www.onetcodeconnector.org/image/more.png) 5 of 16 displayed
- Carve designs or figures in full or bas relief on stone, employing knowledge of stone carving techniques and sense of artistry to produce carvings consistent with designers' plans.
- Carve rough designs freehand or by chipping along marks on stone, using mallets and chisels or pneumatic tools.
- Copy drawings on rough clay or plaster models.
- Cut, shape, and finish rough blocks of building or monumental stone, according to diagrams or patterns.
- Dress stone surfaces, using bushhammers.
![Show fewer](/https/www.onetcodeconnector.org/image/less.png) All 16 displayed
- Carve designs or figures in full or bas relief on stone, employing knowledge of stone carving techniques and sense of artistry to produce carvings consistent with designers' plans.
- Carve rough designs freehand or by chipping along marks on stone, using mallets and chisels or pneumatic tools.
- Copy drawings on rough clay or plaster models.
- Cut, shape, and finish rough blocks of building or monumental stone, according to diagrams or patterns.
- Dress stone surfaces, using bushhammers.
- Drill holes and cut or carve moldings and grooves in stone, according to diagrams and patterns.
- Guide nozzles over stone, following stencil outlines, or chip along marks to create designs or to work surfaces down to specified finishes.
- Lay out designs or dimensions from sketches or blueprints on stone surfaces, freehand or by transferring them from tracing paper, using scribes or chalk and measuring instruments.
- Load sandblasting equipment with abrasives, attach nozzles to hoses, and turn valves to admit compressed air and activate jets.
- Move fingers over surfaces of carvings to ensure smoothness of finish.
- Remove or add stencils during blasting to create differing cut depths, intricate designs, or rough, pitted finishes.
- Select chisels, pneumatic or surfacing tools, or sandblasting nozzles, and determine sequence of use.
- Shape, trim, or touch up roughed-out designs with appropriate tools to finish carvings.
- Smooth surfaces of carvings, using rubbing stones.
- Study artistic objects or graphic materials, such as models, sketches, or blueprints, to plan carving or cutting techniques.
- Verify depths and dimensions of cuts or carvings to ensure adherence to specifications, blueprints, or models, using measuring instruments.
![Show all](/https/www.onetcodeconnector.org/image/more.png) 5 of 14 displayed
- Apply decorative masonry finishes.
- Attach decorative or functional accessories to products.
- Cut industrial materials in preparation for fabrication or processing.
- Draw guide lines or markings on materials or workpieces using patterns or other references.
- Drill holes in parts, equipment, or materials.
![Show fewer](/https/www.onetcodeconnector.org/image/less.png) All 14 displayed
- Apply decorative masonry finishes.
- Attach decorative or functional accessories to products.
- Cut industrial materials in preparation for fabrication or processing.
- Draw guide lines or markings on materials or workpieces using patterns or other references.
- Drill holes in parts, equipment, or materials.
- Engrave designs, text, or other markings onto materials, workpieces, or products.
- Inspect finishes of workpieces or finished products.
- Load materials into production equipment.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Polish materials, workpieces, or finished products.
- Remove accessories, tools, or other parts from equipment.
- Review blueprints or other instructions to determine operational methods or sequences.
- Select production equipment according to product specifications.
- Trim excess material from workpieces.
- Allied Trades Specialist (Army - Enlisted)
- Sandblaster, Stone
- Stone Carver
|
|
- Sandblaster, Stone
- Sandblaster, Stone Apprentice
- Stone Carver
|
- Stonecutter Apprentice, Hand
- Stonecutter, Hand
|
|