Silicone 3D Printing
3D printed silicone comes in a variety of shore-A hardnesses and temperature ranges to fit your application
![True Silicone structure](/media/tcsnioeo/truesilicone_2022.png?width=670&height=360&rnd=133142857493200000)
Product Description
True silicone is 100% pure silicone that is available in different shore-A hardness as detailed below. The material is suitable to produce both functional prototypes and end-use products, which can be used in a temperature range of -30°C to +180°C (-22°F to +356°F).
The material shows high resistance to harsh environments conditions, various acids, bases and nonpolar solvents. Silicone parts are water repellent, insulating, and have a high gas permeability.
Key Product Benefits
- High temperature and wear resistance
- Elasticity and high reproducibility after deformation or stress
- Range of durometers (60A)
![Sample of True Silicone](/media/2o1bamzm/truesilicone_2022_02.jpg?width=670&height=360&rnd=133101298579100000)
Applications for 3D-Printed Silicone
True silicone is well-suited for small prototyping runs before investing in tooling for injection molding or manufacturing silicone parts with complex, organic geometries. Typical parts include:
- Seals, gaskets, and grommets
- Keypads and buttons
- Surgical models
- Dental liners
Silicone 3D Printing Properties
Property | Test Method | Value | ||
---|---|---|---|---|
Shore-A Hardness | ISO 7619-1 | 35 | 50 | 60 |
Density | ISO 1183-1 A | 2.10 lb/in3 | 2.15 lb/in3 | 2.19 lb/in3 |
Tensile Strength | ISO 37 Type 4 | 1,450 psi | 1,233 psi | 1,160 psi |
Elongation at Break | ISO 37 Type 4 | 950% | 550% | 320% |
Tear Strength | ASTM D624 Type C | 60 lbf/in. | 51.4 lbf/in. | 80 lbf/in. |
Property | Test Method | Value | ||
---|---|---|---|---|
Shore-A Hardness | ISO 7619-1 | 35 | 50 | 60 |
Density | ISO 1183-1 A | 1.08 g/cm3 | 1.11 g/cm3 | 1.13 g/cm3 |
Tensile Strength | ISO 37 Type 4 | 10 MPa | 8.5 MPa | 8 MPa |
Elongation at Break | ISO 37 Type 4 | 950% | 550% | 320% |
Tear Strength | ASTM D624 Type C | 10.5 N/mm | 9 N/mm | 14 N/mm |
True Silicone Comparison to Common Elastomers
![true silicone material comparison](/media/cejes0nc/3dp_truesilicone_2.jpg)
![true silicone material comparison](/media/0gzg4nhx/3dp_truesilicone_1.jpg)
Design Considerations
Our basic guidelines and design considerations for 3D-printed silicone will help ensure a manufacturable part and overall quality.
US | Metric | |
---|---|---|
Maximum Part Size | 4.7 in x 2.8 in. x 3.9 in. | 119.38mm x 71.12mm x 99.06mm |
Minimum Feature Size | X-Y Plane: 0.01 in. Z Plane: 0.016 in. |
X-Y Plane: 0.25mm Z Plane: 0.40mm |
Minimum Thickness | Supported Walls: 0.012 in. Unsupported Walls: 0.02 in. |
Supported Walls: 0.30mm Unsupported Walls: 0.50mm |
Tolerances | The tolerances for well-designed parts in the X / Y / Z direction are +/- 0.004 in. for first inch plus 0.1% of nominal length | The tolerances for well-designed parts in the X / Y / Z direction are +/- 0.1mm for first inch plus 0.1% of nominal length |