-
Optical Routing via High Efficiency Composite Acoustic Diffraction
Authors:
Yuxiang Zhao,
Jiangyong Hu,
Ruijuan Liu,
Ruochen Gao,
Yiming Li,
Xiao Zhang,
Huanfeng Zhu,
Saijun Wu
Abstract:
Acousto-optical modulation (AOM) is a powerful and widely used technique for rapidly controlling the frequency, phase, intensity, and direction of light. Based on Bragg diffraction, AOMs typically exhibit moderate diffraction efficiency, often less than 90\% even for collimated inputs. In this work, we demonstrate that this efficiency can be significantly improved using a composite (CP) setup comp…
▽ More
Acousto-optical modulation (AOM) is a powerful and widely used technique for rapidly controlling the frequency, phase, intensity, and direction of light. Based on Bragg diffraction, AOMs typically exhibit moderate diffraction efficiency, often less than 90\% even for collimated inputs. In this work, we demonstrate that this efficiency can be significantly improved using a composite (CP) setup comprising a pair of 4-F-linked AOMs, enabling 2-by-2 beamsplitting with fully tunable splitting amplitude and phase. The efficiency enhancement arises from two effects, termed "momentum echo" and "high-order rephasing," which can be simultaneously optimized by adjusting the relative distance between the two AOMs. This method is resource-efficient, does not require ultra-collimation, and maintains control bandwidth. Experimentally, we achieved a diffraction efficiency exceeding 99\% (excluding insertion loss) and a 35 dB single-mode suppression of the 0th-order beam, demonstrating a full-contrast optical router with a switching time of less than 100~nanoseconds. Theoretically, we formulate the dynamics of CP-AOM in terms of multi-mode quantum control and discuss extensions beyond the $N=2$ configuration presented in this work. The substantially enhanced performance of CP-AOMs, coupled with reduced acoustic amplitude requirements, may significantly advance our ability to accurately control light at high speeds with low-loss acousto-optics.
△ Less
Submitted 27 August, 2024;
originally announced August 2024.
-
Single-photon interference over 8.4 km urban atmosphere: towards testing quantum effects in curved spacetime with photons
Authors:
Hui-Nan Wu,
Yu-Huai Li,
Bo Li,
Xiang You,
Run-Ze Liu,
Ji-Gang Ren,
Juan Yin,
Chao-Yang Lu,
Yuan Cao,
Cheng-Zhi Peng,
Jian-Wei Pan
Abstract:
The emergence of quantum mechanics and general relativity has transformed our understanding of the natural world significantly. However, integrating these two theories presents immense challenges, and their interplay remains untested. Recent theoretical studies suggest that the single-photon interference covering huge space can effectively probe the interface between quantum mechanics and general…
▽ More
The emergence of quantum mechanics and general relativity has transformed our understanding of the natural world significantly. However, integrating these two theories presents immense challenges, and their interplay remains untested. Recent theoretical studies suggest that the single-photon interference covering huge space can effectively probe the interface between quantum mechanics and general relativity. We developed an alternative design using unbalanced Michelson interferometers to address this and validated its feasibility over an 8.4 km free-space channel. Using a high-brightness single-photon source based on quantum dots, we demonstrated single-photon interference along this long-distance baseline. We achieved a phase measurement precision of 16.2 mrad, which satisfied the measurement requirements for a gravitational redshift at the geosynchronous orbit by five times the standard deviation. Our results confirm the feasibility of the single-photon version of the Colella-Overhauser-Werner experiment for testing the quantum effects in curved spacetime.
△ Less
Submitted 18 August, 2024; v1 submitted 6 August, 2024;
originally announced August 2024.
-
Cascading failures with group support in interdependent hypergraphs
Authors:
Lei Chen,
Chunxiao Jia,
Run-Ran Liu,
Fanyuan Meng
Abstract:
The functionality of an entity frequently necessitates the support of a group situated in another layer of the system. To unravel the profound impact of such group support on a system's resilience against cascading failures, we devise a framework comprising a double-layer interdependent hypergraph system, wherein nodes are capable of receiving support via hyperedges. Our central hypothesis posits…
▽ More
The functionality of an entity frequently necessitates the support of a group situated in another layer of the system. To unravel the profound impact of such group support on a system's resilience against cascading failures, we devise a framework comprising a double-layer interdependent hypergraph system, wherein nodes are capable of receiving support via hyperedges. Our central hypothesis posits that the failure may transcend to another layer when all support groups of each dependent node fail, thereby initiating a potentially iterative cascade across layers. Through rigorous analytical methods, we derive the critical threshold for the initial node survival probability that marks the second-order phase transition point. A salient discovery is that as the prevalence of dependent nodes escalates, the system dynamics shift from a second-order to a first-order phase transition. Notably, irrespective of the collapse pattern, systems characterized by scale-free hyperdegree distributions within both hypergraph layers consistently demonstrate superior robustness compared to those adhering to Poisson hyperdegree distributions. In summary, our research underscores the paramount significance of group support mechanisms and intricate network topologies in determining the resilience of interconnected systems against the propagation of cascading failures. By exploring the interplay between these factors, we have gained insights into how systems can be designed or optimized to mitigate the risk of widespread disruptions, ensuring their continued functionality and stability in the face of adverse events.
△ Less
Submitted 2 August, 2024;
originally announced August 2024.
-
Invariant Discovery of Features Across Multiple Length Scales: Applications in Microscopy and Autonomous Materials Characterization
Authors:
Aditya Raghavan,
Utkarsh Pratiush,
Mani Valleti,
Richard Liu,
Reece Emery,
Hiroshi Funakubo,
Yongtao Liu,
Philip Rack,
Sergei Kalinin
Abstract:
Physical imaging is a foundational characterization method in areas from condensed matter physics and chemistry to astronomy and spans length scales from atomic to universe. Images encapsulate crucial data regarding atomic bonding, materials microstructures, and dynamic phenomena such as microstructural evolution and turbulence, among other phenomena. The challenge lies in effectively extracting a…
▽ More
Physical imaging is a foundational characterization method in areas from condensed matter physics and chemistry to astronomy and spans length scales from atomic to universe. Images encapsulate crucial data regarding atomic bonding, materials microstructures, and dynamic phenomena such as microstructural evolution and turbulence, among other phenomena. The challenge lies in effectively extracting and interpreting this information. Variational Autoencoders (VAEs) have emerged as powerful tools for identifying underlying factors of variation in image data, providing a systematic approach to distilling meaningful patterns from complex datasets. However, a significant hurdle in their application is the definition and selection of appropriate descriptors reflecting local structure. Here we introduce the scale-invariant VAE approach (SI-VAE) based on the progressive training of the VAE with the descriptors sampled at different length scales. The SI-VAE allows the discovery of the length scale dependent factors of variation in the system. Here, we illustrate this approach using the ferroelectric domain images and generalize it to the movies of the electron-beam induced phenomena in graphene and topography evolution across combinatorial libraries. This approach can further be used to initialize the decision making in automated experiments including structure-property discovery and can be applied across a broad range of imaging methods. This approach is universal and can be applied to any spatially resolved data including both experimental imaging studies and simulations, and can be particularly useful for exploration of phenomena such as turbulence, scale-invariant transformation fronts, etc.
△ Less
Submitted 31 July, 2024;
originally announced August 2024.
-
Nonparametric Statistics on Magnetic Properties at the Footpoints of Erupting Magnetic Flux Ropes
Authors:
Rui Liu,
Wensi Wang
Abstract:
It is under debate whether the magnetic field in the solar atmosphere carries neutralized electric currents; particularly, whether a magnetic flux rope (MFR), which is considered the core structure of coronal mass ejections, carries neutralized electric currents. Recently Wang et al. (2023, ApJ, 943, 80) studied magnetic flux and electric current measured at the footpoints of 28 eruptive MFRs from…
▽ More
It is under debate whether the magnetic field in the solar atmosphere carries neutralized electric currents; particularly, whether a magnetic flux rope (MFR), which is considered the core structure of coronal mass ejections, carries neutralized electric currents. Recently Wang et al. (2023, ApJ, 943, 80) studied magnetic flux and electric current measured at the footpoints of 28 eruptive MFRs from 2010 to 2015. Because of the small sample size, no rigorous statistics has been done. Here, we include 9 more events from 2016 to 2023 and perform a series of nonparametric statistical tests at a significance level of 5\%. The tests confirm that there exist no significant differences in magnetic properties between conjugated footpoints of the same MFR, which justifies the method of identifying the MFR footpoints through coronal dimming. The tests demonstrate that there exist no significant differences between MFRs with pre-eruption dimming and those with only post-eruption dimming. However, there is a medium level of association between MFRs carrying substantial net current and those produce pre-eruption dimming, which can be understood by the Lorentz-self force of the current channel. The tests also suggest that in estimating the magnetic twist of MFRs, it is necessary to take into account the spatially inhomogeneous distribution of electric current density and magnetic field.
△ Less
Submitted 21 July, 2024;
originally announced July 2024.
-
Nanodiamond-based spatial-temporal deformation sensing for cell mechanics
Authors:
Yue Cui,
Weng-Hang Leong,
Guoli Zhu,
Ren-Bao Liu,
Quan Li
Abstract:
Precise assessment of the mechanical properties of soft biological systems at the nanoscale is crucial for understanding physiology, pathology, and developing relevant drugs. Conventional atomic force microscopy (AFM)-based indentation methods suffer from uncertainties in local tip-sample interactions and model choice. This can be overcome by adopting spatially resolved nonlocal deformation sensin…
▽ More
Precise assessment of the mechanical properties of soft biological systems at the nanoscale is crucial for understanding physiology, pathology, and developing relevant drugs. Conventional atomic force microscopy (AFM)-based indentation methods suffer from uncertainties in local tip-sample interactions and model choice. This can be overcome by adopting spatially resolved nonlocal deformation sensing for mechanical analysis. However, the technique is currently limited to lifeless/static systems, due to the inadequate spatial or temporal resolution, or difficulties in differentiating the indentation-induced deformation from that associated with live activities and other external perturbations. Here, we develop an innovative dynamic nonlocal deformation sensing approach allowing both spatially and temporally resolved mechanical analysis, which achieves a tens of microsecond time-lag precision, a nanometer vertical deformation precision, and a sub-hundred nanometer lateral spatial resolution. Using oscillatory nanoindentation and spectroscopic analysis, the method can separate the indentation-caused signal from random noise, enabling live cell measurement. Using this method, we discover a distance-dependent phase of surface deformation during indentation, leading to the disclosure of surface tension effects (capillarity) in the mechanical response of live cells upon AFM indentation. A viscoelastic model with surface tension is used to enable simultaneous quantification of the viscoelasticity and capillarity of cell. We show that neglecting surface tension, as in conventional AFM methods, would underestimate the liquid-like characteristics and overestimate the apparent viscoelastic modulus of cells. The study lays down a foundation for understanding a broad range of elastocapillarity-related interfacial mechanics and mechanobiological processes in live cells.
△ Less
Submitted 19 August, 2024; v1 submitted 5 June, 2024;
originally announced June 2024.
-
Observation of full contrast icosahedral Bose-Einstein statistics in laser desorbed, buffer gas cooled C$_{60}$
Authors:
Ya-Chu Chan,
Lee R. Liu,
Andrew Scheck,
David J. Nesbitt,
Jun Ye,
Dina Rosenberg
Abstract:
The quantum mechanical nature of spherical top molecules is particularly evident at low angular momentum quantum number J. Using infrared spectroscopy on the 8.4$μ$m rovibrational band of buffer gas cooled $^{12}$C$_{60}$, we observe the hitherto unseen R(J = 0 - 29) rotational progression, including the complete disappearance of certain transitions due to the molecule's perfect icosahedral symmet…
▽ More
The quantum mechanical nature of spherical top molecules is particularly evident at low angular momentum quantum number J. Using infrared spectroscopy on the 8.4$μ$m rovibrational band of buffer gas cooled $^{12}$C$_{60}$, we observe the hitherto unseen R(J = 0 - 29) rotational progression, including the complete disappearance of certain transitions due to the molecule's perfect icosahedral symmetry and identical bosonic nuclei. The observation of extremely weak C$_{60}$ absorption is facilitated by a laser desorption C$_{60}$ vapor source, which transfers 1000-fold less heat to the cryogenic buffer gas cell than a traditional oven source. This technique paves the way to cooling C$_{60}$ and other large gas phase molecules to much lower temperatures, providing continued advances for spectral resolution and sensitivity.
△ Less
Submitted 23 June, 2024; v1 submitted 19 June, 2024;
originally announced June 2024.
-
Search for fractionally charged particles with CUORE
Authors:
CUORE Collaboration,
D. Q. Adams,
C. Alduino,
K. Alfonso,
F. T. Avignone III,
O. Azzolini,
G. Bari,
F. Bellini,
G. Benato,
M. Beretta,
M. Biassoni,
A. Branca,
C. Brofferio,
C. Bucci,
J. Camilleri,
A. Caminata,
A. Campani,
J. Cao,
S. Capelli,
C. Capelli,
L. Cappelli,
L. Cardani,
P. Carniti,
N. Casali,
E. Celi
, et al. (95 additional authors not shown)
Abstract:
The Cryogenic Underground Observatory for Rare Events (CUORE) is a detector array comprised by 988 5$\;$cm$\times$5$\;$cm$\times$5$\;$cm TeO$_2$ crystals held below 20 mK, primarily searching for neutrinoless double-beta decay in $^{130}$Te. Unprecedented in size amongst cryogenic calorimetric experiments, CUORE provides a promising setting for the study of exotic through-going particles. Using th…
▽ More
The Cryogenic Underground Observatory for Rare Events (CUORE) is a detector array comprised by 988 5$\;$cm$\times$5$\;$cm$\times$5$\;$cm TeO$_2$ crystals held below 20 mK, primarily searching for neutrinoless double-beta decay in $^{130}$Te. Unprecedented in size amongst cryogenic calorimetric experiments, CUORE provides a promising setting for the study of exotic through-going particles. Using the first tonne-year of CUORE's exposure, we perform a search for hypothesized fractionally charged particles (FCPs), which are well-motivated by various Standard Model extensions and would have suppressed interactions with matter. No excess of FCP candidate tracks is observed over background, setting leading limits on the underground FCP flux with charges between $e/24-e/5$ at 90\% confidence level. Using the low background environment and segmented geometry of CUORE, we establish the sensitivity of tonne-scale sub-Kelvin detectors to diverse signatures of new physics.
△ Less
Submitted 18 June, 2024;
originally announced June 2024.
-
Data-driven background model for the CUORE experiment
Authors:
CUORE Collaboration,
D. Q. Adams,
C. Alduino,
K. Alfonso,
F. T. Avignone III,
O. Azzolini,
G. Bari,
F. Bellini,
G. Benato,
M. Beretta,
M. Biassoni,
A. Branca,
C. Brofferio,
C. Bucci,
J. Camilleri,
A. Caminata,
A. Campani,
J. Cao,
S. Capelli,
C. Capelli,
L. Cappelli,
L. Cardani,
P. Carniti,
N. Casali,
E. Celi
, et al. (93 additional authors not shown)
Abstract:
We present the model we developed to reconstruct the CUORE radioactive background based on the analysis of an experimental exposure of 1038.4 kg yr. The data reconstruction relies on a simultaneous Bayesian fit applied to energy spectra over a broad energy range. The high granularity of the CUORE detector, together with the large exposure and extended stable operations, allow for an in-depth explo…
▽ More
We present the model we developed to reconstruct the CUORE radioactive background based on the analysis of an experimental exposure of 1038.4 kg yr. The data reconstruction relies on a simultaneous Bayesian fit applied to energy spectra over a broad energy range. The high granularity of the CUORE detector, together with the large exposure and extended stable operations, allow for an in-depth exploration of both spatial and time dependence of backgrounds. We achieve high sensitivity to both bulk and surface activities of the materials of the setup, detecting levels as low as 10 nBq kg$^{-1}$ and 0.1 nBq cm$^{-2}$, respectively. We compare the contamination levels we extract from the background model with prior radio-assay data, which informs future background risk mitigation strategies. The results of this background model play a crucial role in constructing the background budget for the CUPID experiment as it will exploit the same CUORE infrastructure.
△ Less
Submitted 28 May, 2024;
originally announced May 2024.
-
Data quality control system and long-term performance monitor of the LHAASO-KM2A
Authors:
Zhen Cao,
F. Aharonian,
Axikegu,
Y. X. Bai,
Y. W. Bao,
D. Bastieri,
X. J. Bi,
Y. J. Bi,
W. Bian,
A. V. Bukevich,
Q. Cao,
W. Y. Cao,
Zhe Cao,
J. Chang,
J. F. Chang,
A. M. Chen,
E. S. Chen,
H. X. Chen,
Liang Chen,
Lin Chen,
Long Chen,
M. J. Chen,
M. L. Chen,
Q. H. Chen,
S. Chen
, et al. (263 additional authors not shown)
Abstract:
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To…
▽ More
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively.
△ Less
Submitted 13 June, 2024; v1 submitted 20 May, 2024;
originally announced May 2024.
-
Robust field-free switching using large unconventional spin-orbit torque in an all-van der Waals heterostructure
Authors:
Yiyang Zhang,
Xiaolin Ren,
Ruizi Liu,
Zehan Chen,
Xuezhao Wu,
Jie Pang,
Wei Wang,
Guibin Lan,
Kenji Watanabe,
Takashi Taniguchi,
Youguo Shi,
Guoqiang Yu,
Qiming Shao
Abstract:
The emerging all-van der Waals (vdW) magnetic heterostructure provides a new platform to control the magnetization by the electric field beyond the traditional spintronics devices. One promising strategy is using unconventional spin-orbit torque (SOT) exerted by the out-of-plane polarized spin current to enable deterministic magnetization switching and enhance the switching efficiency. However, in…
▽ More
The emerging all-van der Waals (vdW) magnetic heterostructure provides a new platform to control the magnetization by the electric field beyond the traditional spintronics devices. One promising strategy is using unconventional spin-orbit torque (SOT) exerted by the out-of-plane polarized spin current to enable deterministic magnetization switching and enhance the switching efficiency. However, in all-vdW heterostructures, large unconventional SOT remains elusive and the robustness of the field-free switching against external magnetic field hasn't been examined, which hinder further applications. Here we demonstrate the field-free switching in an all-vdW heterostructure combining a type-II Weyl semimetal TaIrTe4 and above-room-temperature ferromagnet Fe3GaTe2. The fully field-free switching can be achieved at 2.56 x 10^10 A per m2 at 300K and a large SOT effective field efficiency of the out-of-plane polarized spin current generated by TaIrTe4 is determined to be 0.37. Moreover, we find that the switching polarity cannot be changed until the external in-plane magnetic field reaches 252mT, indicating a robust switching against the magnetic field. The numerical simulation suggests the large unconventional SOT reduces the switching current density and enhances the robustness of the switching. Our work shows that all-vdW heterostructures are promising candidates for future highly efficient and stable SOT-based devices.
△ Less
Submitted 8 August, 2024; v1 submitted 10 May, 2024;
originally announced May 2024.
-
The environmental low-frequency background for macro-calorimeters at the millikelvin scale
Authors:
L. Aragão,
A. Armigliato,
R. Brancaccio,
C. Brofferio,
S. Castellaro,
A. D'Addabbo,
G. De Luca,
F. Del Corso,
S. Di Sabatino,
R. Liu,
L. Marini,
I. Nutini,
S. Quitadamo,
P. Ruggieri,
K. J. Vetter,
M. Zavatarelli,
S. Zucchelli
Abstract:
Many of the most sensitive physics experiments searching for rare events, like neutrinoless double beta ($0νββ$) decay and dark matter interactions, rely on cryogenic macro-calorimeters operating at the mK-scale. Located underground at the Gran Sasso National Laboratory (LNGS), in central Italy, CUORE (Cryogenic Underground Observatory for Rare Events) is one of the leading experiments for the sea…
▽ More
Many of the most sensitive physics experiments searching for rare events, like neutrinoless double beta ($0νββ$) decay and dark matter interactions, rely on cryogenic macro-calorimeters operating at the mK-scale. Located underground at the Gran Sasso National Laboratory (LNGS), in central Italy, CUORE (Cryogenic Underground Observatory for Rare Events) is one of the leading experiments for the search of $0νββ$ decay, implementing the low-temperature calorimetric technology. We present a novel multi-detector analysis to correlate environmental phenomena with the low-frequency noise of low-temperature calorimeters. Indeed, the correlation of marine and seismic data with data from a pair of CUORE detectors indicates that cryogenic detectors are sensitive not only to intense vibrations generated by earthquakes, but also to the much fainter vibrations induced by marine microseisms in the Mediterranean Sea due to the motion of sea waves. Proving that cryogenic macro-calorimeters are sensitive to such environmental sources of noise opens the possibility of studying their impact on the detectors physics-case sensitivity. Moreover, this study could pave the road for technology developments dedicated to the mitigation of the noise induced by marine microseisms, from which the entire community of cryogenic calorimeters can benefit.
△ Less
Submitted 1 September, 2024; v1 submitted 21 April, 2024;
originally announced April 2024.
-
Low-cost and Convenient Fabrication of Polymer Micro/Nanopores with the Needle Punching Process and Their Applications in Nanofluidic Sensing
Authors:
Rui Liu,
Zhe Liu,
Jianfeng Li,
Yinghua Qiu
Abstract:
Solid-state micro/nanopores play an important role in the sensing field because of their high stability and controllable size. Aiming at problems of complex processes and high costs in pore manufacturing, we propose a convenient and low-cost micro/nanopore fabrication technique based on the needle punching method. The thin film is pierced by controlling the feed of a microscale tungsten needle, an…
▽ More
Solid-state micro/nanopores play an important role in the sensing field because of their high stability and controllable size. Aiming at problems of complex processes and high costs in pore manufacturing, we propose a convenient and low-cost micro/nanopore fabrication technique based on the needle punching method. The thin film is pierced by controlling the feed of a microscale tungsten needle, and the size variations of the micropore are monitored by the current feedback system. Based on the positive correlation between the micropore size and the current threshold, the size-controllable preparation of micropores is achieved. The preparation of nanopores is realized by the combination of needle punching and chemical etching. Firstly, a conical defect is prepared on the film with the tungsten needle. Then, nanopores are obtained by unilateral chemical etching of the film. Using the prepared conical micropores resistive-pulse detection of nanoparticles is performed. Significant ionic current rectification is also obtained with our conical nanopores. It is proved that the properties of micro/nanopores prepared by our method are comparable to those prepared by the track-etching method. The simple and controllable fabrication process proposed here will advance the development of low-cost micro/nanopore sensors.
△ Less
Submitted 15 March, 2024;
originally announced March 2024.
-
Generative deep learning-enabled ultra-large field-of-view lens-free imaging
Authors:
Ronald B. Liu,
Zhe Liu,
Max G. A. Wolf,
Krishna P. Purohit,
Gregor Fritz,
Yi Feng,
Carsten G. Hansen,
Pierre O. Bagnaninchi,
Xavier Casadevall i Solvas,
Yunjie Yang
Abstract:
Advancements in high-throughput biomedical applications necessitate real-time, large field-of-view (FOV) imaging capabilities. Conventional lens-free imaging (LFI) systems, while addressing the limitations of physical lenses, have been constrained by dynamic, hard-to-model optical fields, resulting in a limited one-shot FOV of approximately 20 $mm^2$. This restriction has been a major bottleneck i…
▽ More
Advancements in high-throughput biomedical applications necessitate real-time, large field-of-view (FOV) imaging capabilities. Conventional lens-free imaging (LFI) systems, while addressing the limitations of physical lenses, have been constrained by dynamic, hard-to-model optical fields, resulting in a limited one-shot FOV of approximately 20 $mm^2$. This restriction has been a major bottleneck in applications like live-cell imaging and automation of microfluidic systems for biomedical research. Here, we present a deep-learning(DL)-based imaging framework - GenLFI - leveraging generative artificial intelligence (AI) for holographic image reconstruction. We demonstrate that GenLFI can achieve a real-time FOV over 550 $mm^2$, surpassing the current LFI system by more than 20-fold, and even larger than the world's largest confocal microscope by 1.76 times. The resolution is at the sub-pixel level of 5.52 $μm$, without the need for a shifting light source. The unsupervised learning-based reconstruction does not require optical field modeling, making imaging dynamic 3D samples (e.g., droplet-based microfluidics and 3D cell models) in complex optical fields possible. This GenLFI framework unlocks the potential of LFI systems, offering a robust tool to tackle new frontiers in high-throughput biomedical applications such as drug discovery.
△ Less
Submitted 22 March, 2024; v1 submitted 12 March, 2024;
originally announced March 2024.
-
Topology and entanglement of molecular phase space
Authors:
Victor V. Albert,
Eric Kubischta,
Mikhail Lemeshko,
Lee R. Liu
Abstract:
We formulate a quantum phase space for molecular rotational and nuclear-spin states. Taking in molecular geometry and nuclear-spin data, our framework yields admissible position and momentum states, inter-convertible via a generalized Fourier transform. We classify molecules into three types -- asymmetric, rotationally symmetric, and perrotationally symmetric -- with the last type having no macros…
▽ More
We formulate a quantum phase space for molecular rotational and nuclear-spin states. Taking in molecular geometry and nuclear-spin data, our framework yields admissible position and momentum states, inter-convertible via a generalized Fourier transform. We classify molecules into three types -- asymmetric, rotationally symmetric, and perrotationally symmetric -- with the last type having no macroscopic analogue due to nuclear-spin statistics constraints. We identify two features in perrotationally symmetric state spaces that are Hamiltonian-independent and induced solely by symmetry and spin statistics. First, many molecular species are intrinsically rotation-spin entangled in a way that cannot be broken without transitioning to another species or breaking symmetry. Second, each molecular position state houses an internal pseudo-spin or "fiber" degree of freedom, and the fiber's Berry phase or matrix after adiabatic changes in position yields naturally robust operations, akin to braiding anyonic quasiparticles or realizing fault-tolerant quantum gates. We outline scenarios where these features can be experimentally probed.
△ Less
Submitted 23 March, 2024; v1 submitted 7 March, 2024;
originally announced March 2024.
-
A simple model of global cascades on random hypergraphs
Authors:
Lei Chen,
Yanpeng Zhu,
Jiadong Zhu,
Zhongyuan Ruan,
Michael Small,
Kim Christensen,
Run-Ran Liu,
Fanyuan Meng
Abstract:
This study introduces a comprehensive framework that situates information cascades within the domain of higher-order interactions, utilizing a double-threshold hypergraph model. We propose that individuals (nodes) gain awareness of information through each communication channel (hyperedge) once the number of information adopters surpasses a threshold $φ_m$. However, actual adoption of the informat…
▽ More
This study introduces a comprehensive framework that situates information cascades within the domain of higher-order interactions, utilizing a double-threshold hypergraph model. We propose that individuals (nodes) gain awareness of information through each communication channel (hyperedge) once the number of information adopters surpasses a threshold $φ_m$. However, actual adoption of the information only occurs when the cumulative influence across all communication channels exceeds a second threshold, $φ_k$. We analytically derive the cascade condition for both the case of a single seed node using percolation methods and the case of any seed size employing mean-field approximation. Our findings underscore that when considering the fractional seed size, $r_0 \in (0,1]$, the connectivity pattern of the random hypergraph, characterized by the hyperdegree, $k$, and cardinality, $m$, distributions, exerts an asymmetric impact on the global cascade boundary. This asymmetry manifests in the observed differences in the boundaries of the global cascade within the $(φ_m, \langle m \rangle)$ and $(φ_k, \langle k \rangle)$ planes. However, as $r_0 \to 0$, this asymmetric effect gradually diminishes. Overall, by elucidating the mechanisms driving information cascades within a broader context of higher-order interactions, our research contributes to theoretical advancements in complex systems theory.
△ Less
Submitted 13 June, 2024; v1 submitted 28 February, 2024;
originally announced February 2024.
-
Exact solutions for nonlinear trapped lee waves in the $β$-plane approximation
Authors:
Lili Fan,
Ruonan Liu,
Heyang Li
Abstract:
In this paper, we construct exact solutions that character three-dimensional, nonlinear trapped lee waves propagation superimposed on longitudinal atmospheric currents in the $β$-plane approximation. The solutions obtained are presented in Lagrangian coordinates, and are Gerstner-like solutions. In the process, we also derive the dispersion relation and analyze the density, pressure and the vortic…
▽ More
In this paper, we construct exact solutions that character three-dimensional, nonlinear trapped lee waves propagation superimposed on longitudinal atmospheric currents in the $β$-plane approximation. The solutions obtained are presented in Lagrangian coordinates, and are Gerstner-like solutions. In the process, we also derive the dispersion relation and analyze the density, pressure and the vorticity qualitatively.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
Kerr optical frequency division with integrated photonics for stable microwave and mmWave generation
Authors:
Shuman Sun,
Mark W. Harrington,
Fatemehsadat Tabatabaei,
Samin Hanifi,
Kaikai Liu,
Jiawei Wang,
Beichen Wang,
Zijiao Yang,
Ruxuan Liu,
Jesse S. Morgan,
Steven M. Bowers,
Paul A. Morton,
Karl D. Nelson,
Andreas Beling,
Daniel J. Blumenthal,
Xu Yi
Abstract:
Optical frequency division (OFD) has revolutionized microwave and mmWave generation and set spectral purity records owing to its unique capability to transfer high fractional stability from optical to electronic frequencies. Recently, rapid developments in integrated optical reference cavities and microresonator-based optical frequency combs (microcombs) have created a path to transform OFD techno…
▽ More
Optical frequency division (OFD) has revolutionized microwave and mmWave generation and set spectral purity records owing to its unique capability to transfer high fractional stability from optical to electronic frequencies. Recently, rapid developments in integrated optical reference cavities and microresonator-based optical frequency combs (microcombs) have created a path to transform OFD technology to chip scale. Here, we demonstrate an ultra-low phase noise mmWave oscillator by leveraging integrated photonic components and Kerr optical frequency division. The oscillator derives its stability from an integrated CMOS-compatible SiN coil cavity, and the optical frequency division is achieved spontaneously through Kerr interaction between the injected reference lasers and soliton microcombs in the integrated SiN microresonator. Besides achieving record-low phase noise for integrated mmWave oscillators, our demonstration greatly simplifies the implementation of integrated OFD oscillators and could be useful in applications of Radar, spectroscopy, and astronomy.
△ Less
Submitted 18 February, 2024;
originally announced February 2024.
-
Quantitative Measurement of adhesion energy between nanolayers and substrates using a nanowire-supported bridging method
Authors:
Xiaodong Song,
Lizhen Hou,
Ruizhe Liu,
Noman Akhtar,
Peng Wang,
Shiliang Wang
Abstract:
The measurement of adhesion energy between nanolayers and substrates holds significant importance for the design, fabrication, and stability assessment of micro-/nanoscale devices relying on nanolayers. In this study, we propose a nanowire-supported bridging method based on an optical microscope-based nanomanipulation technique to quantitatively measure the adhesion energy between nanolayers and s…
▽ More
The measurement of adhesion energy between nanolayers and substrates holds significant importance for the design, fabrication, and stability assessment of micro-/nanoscale devices relying on nanolayers. In this study, we propose a nanowire-supported bridging method based on an optical microscope-based nanomanipulation technique to quantitatively measure the adhesion energy between nanolayers and substrates. Using this innovative approach, we conducted adhesion energy measurements between mica nanolayers and Si substrates, revealing a value of approximately 110 J/m2. Additionally, we discuss the applicable conditions of this new method. The proposed technique allows measurements in atmospheric conditions and is, in principle, applicable to all types of nanolayers and substrates. Consequently, it holds promise as a universal method for assessing adhesion energy between nanolayers and substrates, considering environmental factors such as atmosphere and roughness.
△ Less
Submitted 19 December, 2023; v1 submitted 16 December, 2023;
originally announced December 2023.
-
Unusual Sign Reversal of Field-like Spin-Orbit Torque in Pt/Ni/Py with an Ultrathin Ni Spacer
Authors:
Zishuang Li,
Wenqiang Wang,
Kaiyuan Zhou,
Xiang Zhan,
Tiejun Zhou,
Ronghua Liu
Abstract:
The magnetization manipulation by spin-orbit torques (SOTs) in nonmagnetic-metal (NM)/ferromagnet (FM) heterostructures has provided great opportunities for spin devices. Besides the conventional spin Hall effect (SHE) in heavy metals with strong spin-orbit coupling, the orbital currents have been proposed to be another promising approach to generate strong SOTs. Here, we systematically study the…
▽ More
The magnetization manipulation by spin-orbit torques (SOTs) in nonmagnetic-metal (NM)/ferromagnet (FM) heterostructures has provided great opportunities for spin devices. Besides the conventional spin Hall effect (SHE) in heavy metals with strong spin-orbit coupling, the orbital currents have been proposed to be another promising approach to generate strong SOTs. Here, we systematically study the SOTs efficiency and its dependence on the FM thickness and different NM/FM interfaces in two prototypical Pt/Py and Ta/Py systems by inserting an ultrathin magnetic layer (0.4 nm thick ML = Co, Fe, Gd, and Ni). The dampinglike (DL) torque efficiency $ξ_{DL}$ is significantly enhanced by inserting ultrathin Co, Fe, and Ni layers and is noticeably suppressed for the Gd insertion. Moreover, the Ni insertion results in a sign change of the field-like (FL) torque in Pt/Py and substantially reduces $ξ_{DL}$ in Ta/Py. These results are likely related to the additional spin currents generated by combining the orbital Hall effect (OHE) in the NM and orbital-to-spin conversion in the ML insertion layer and/or their interfaces, especially for the Ni insertion. Our results demonstrate that inserting ultrathin ML can effectively manipulate the strength and sign of the SOTs, which would be helpful for spintronics applications.
△ Less
Submitted 7 December, 2023; v1 submitted 7 December, 2023;
originally announced December 2023.
-
Experimental Generation of Spin-Photon Entanglement in Silicon Carbide
Authors:
Ren-Zhou Fang,
Xiao-Yi Lai,
Tao Li,
Ren-Zhu Su,
Bo-Wei Lu,
Chao-Wei Yang,
Run-Ze Liu,
Yu-Kun Qiao,
Cheng Li,
Zhi-Gang He,
Jia Huang,
Hao Li,
Li-Xing You,
Yong-Heng Huo,
Xiao-Hui Bao,
Jian-Wei Pan
Abstract:
A solid-state approach for quantum networks is advantages, as it allows the integration of nanophotonics to enhance the photon emission and the utilization of weakly coupled nuclear spins for long-lived storage. Silicon carbide, specifically point defects within it, shows great promise in this regard due to the easy of availability and well-established nanofabrication techniques. Despite of remark…
▽ More
A solid-state approach for quantum networks is advantages, as it allows the integration of nanophotonics to enhance the photon emission and the utilization of weakly coupled nuclear spins for long-lived storage. Silicon carbide, specifically point defects within it, shows great promise in this regard due to the easy of availability and well-established nanofabrication techniques. Despite of remarkable progresses made, achieving spin-photon entanglement remains a crucial aspect to be realized. In this paper, we experimentally generate entanglement between a silicon vacancy defect in silicon carbide and a scattered single photon in the zero-phonon line. The spin state is measured by detecting photons scattered in the phonon sideband. The photonic qubit is encoded in the time-bin degree-of-freedom and measured using an unbalanced Mach-Zehnder interferometer. Photonic correlations not only reveal the quality of the entanglement but also verify the deterministic nature of the entanglement creation process. By harnessing two pairs of such spin-photon entanglement, it becomes straightforward to entangle remote quantum nodes at long distance.
△ Less
Submitted 29 November, 2023;
originally announced November 2023.
-
Fixation dynamics on multilayer networks
Authors:
Ruodan Liu,
Naoki Masuda
Abstract:
Network structure has a large impact on constant-selection evolutionary dynamics, with which multiple types of different fitnesses (i.e., strengths) compete on the network. Here we study constant-selection dynamics on two-layer networks in which the fitness of a node in one layer affects that in the other layer, under birth-death processes and uniform initialization, which are commonly assumed. We…
▽ More
Network structure has a large impact on constant-selection evolutionary dynamics, with which multiple types of different fitnesses (i.e., strengths) compete on the network. Here we study constant-selection dynamics on two-layer networks in which the fitness of a node in one layer affects that in the other layer, under birth-death processes and uniform initialization, which are commonly assumed. We show mathematically and numerically that two-layer networks are suppressors of selection, which suppresses the effects of the different fitness values between the different types on final outcomes of the evolutionary dynamics (called fixation probability), relative to the constituent one-layer networks. In fact, many two-layer networks are suppressors of selection relative to the most basic baseline, the Moran process. This result is in stark contrast with the results for conventional one-layer networks for which most networks are amplifiers of selection.
△ Less
Submitted 27 November, 2023;
originally announced November 2023.
-
Defect-induced helicity-dependent terahertz emission in Dirac semimetal PtTe2 thin films
Authors:
Zhongqiang Chen,
Hongsong Qiu,
Xinjuan Cheng,
Jizhe Cui,
Zuanming Jin,
Da Tian,
Xu Zhang,
Kankan Xu,
Ruxin Liu,
Wei Niu,
Liqi Zhou,
Tianyu Qiu,
Yequan Chen,
Caihong Zhang,
Xiaoxiang Xi,
Fengqi Song,
Rong Yu,
Xuechao Zhai,
Biaobing Jin,
Rong Zhang,
Xuefeng Wang
Abstract:
Nonlinear transport enabled by symmetry breaking in quantum materials has aroused considerable interest in condensed matter physics and interdisciplinary electronics. However, the nonlinear optical response in centrosymmetric Dirac semimetals via the defect engineering has remained highly challenging. Here, we observe the helicity-dependent terahertz (THz) emission in Dirac semimetal PtTe2 thin fi…
▽ More
Nonlinear transport enabled by symmetry breaking in quantum materials has aroused considerable interest in condensed matter physics and interdisciplinary electronics. However, the nonlinear optical response in centrosymmetric Dirac semimetals via the defect engineering has remained highly challenging. Here, we observe the helicity-dependent terahertz (THz) emission in Dirac semimetal PtTe2 thin films via circular photogalvanic effect (CPGE) under normal incidence. This is activated by artificially controllable out-of-plane Te-vacancy defect gradient, which is unambiguously evidenced by the electron ptychography. The defect gradient lowers the symmetry, which not only induces the band spin splitting, but also generates the giant Berry curvature dipole (BCD) responsible for the CPGE. Such BCD-induced helicity-dependent THz emission can be manipulated by the Te-vacancy defect concentration. Furthermore, temperature evolution of the THz emission features the minimum of the THz amplitude due to the carrier compensation. Our work provides a universal strategy for symmetry breaking in centrosymmetric Dirac materials for efficient nonlinear transport and facilitates the promising device applications in integrated optoelectronics and spintronics.
△ Less
Submitted 1 March, 2024; v1 submitted 15 October, 2023;
originally announced October 2023.
-
On Accelerating Diffusion-based Molecular Conformation Generation in SE(3)-invariant Space
Authors:
Zihan Zhou,
Ruiying Liu,
Tianshu Yu
Abstract:
Diffusion-based generative models in SE(3)-invariant space have demonstrated promising performance in molecular conformation generation, but typically require solving stochastic differential equations (SDEs) with thousands of update steps. Till now, it remains unclear how to effectively accelerate this procedure explicitly in SE(3)-invariant space, which greatly hinders its wide application in the…
▽ More
Diffusion-based generative models in SE(3)-invariant space have demonstrated promising performance in molecular conformation generation, but typically require solving stochastic differential equations (SDEs) with thousands of update steps. Till now, it remains unclear how to effectively accelerate this procedure explicitly in SE(3)-invariant space, which greatly hinders its wide application in the real world. In this paper, we systematically study the diffusion mechanism in SE(3)-invariant space via the lens of approximate errors induced by existing methods. Thereby, we develop more precise approximate in SE(3) in the context of projected differential equations. Theoretical analysis is further provided as well as empirical proof relating hyper-parameters with such errors. Altogether, we propose a novel acceleration scheme for generating molecular conformations in SE(3)-invariant space. Experimentally, our scheme can generate high-quality conformations with 50x--100x speedup compared to existing methods.
△ Less
Submitted 1 February, 2024; v1 submitted 7 October, 2023;
originally announced October 2023.
-
Molecular Conformation Generation via Shifting Scores
Authors:
Zihan Zhou,
Ruiying Liu,
Chaolong Ying,
Ruimao Zhang,
Tianshu Yu
Abstract:
Molecular conformation generation, a critical aspect of computational chemistry, involves producing the three-dimensional conformer geometry for a given molecule. Generating molecular conformation via diffusion requires learning to reverse a noising process. Diffusion on inter-atomic distances instead of conformation preserves SE(3)-equivalence and shows superior performance compared to alternativ…
▽ More
Molecular conformation generation, a critical aspect of computational chemistry, involves producing the three-dimensional conformer geometry for a given molecule. Generating molecular conformation via diffusion requires learning to reverse a noising process. Diffusion on inter-atomic distances instead of conformation preserves SE(3)-equivalence and shows superior performance compared to alternative techniques, whereas related generative modelings are predominantly based upon heuristical assumptions. In response to this, we propose a novel molecular conformation generation approach driven by the observation that the disintegration of a molecule can be viewed as casting increasing force fields to its composing atoms, such that the distribution of the change of inter-atomic distance shifts from Gaussian to Maxwell-Boltzmann distribution. The corresponding generative modeling ensures a feasible inter-atomic distance geometry and exhibits time reversibility. Experimental results on molecular datasets demonstrate the advantages of the proposed shifting distribution compared to the state-of-the-art.
△ Less
Submitted 7 October, 2023; v1 submitted 12 September, 2023;
originally announced September 2023.
-
A real-time hole depth diagnostic based on coherent imaging with plasma amendment during femtosecondlaser hole-drilling
Authors:
Ping Xu,
Yi Yu,
Chijie Xiao,
Ruijia Liu,
Kang Zha,
Lin Zhou,
Yongtao Liu,
Zhou Xu
Abstract:
An in-process coherent imaging diagnostic has been developed to real-time measure the hole depth during air-film hole drilling by a femtosecond laser. A super-luminescent diode with a wavelength of 830~13 nm is chosen as the coherent light source which determines a depth resolution of 12 μm. The drilled hole is coupled as a part of the sample arm and the depth variation can be extracted from the l…
▽ More
An in-process coherent imaging diagnostic has been developed to real-time measure the hole depth during air-film hole drilling by a femtosecond laser. A super-luminescent diode with a wavelength of 830~13 nm is chosen as the coherent light source which determines a depth resolution of 12 μm. The drilled hole is coupled as a part of the sample arm and the depth variation can be extracted from the length variation of the optical path. Interference is realized in the detection part and a code has been written to discriminate the interference fringes. Density of plasma in the hole is diagnosed to evaluate its amendment to the optical path length and the depth measurement error induced by plasma is non-ignorable when drilling deep holes.
△ Less
Submitted 17 June, 2023;
originally announced September 2023.
-
Strong magnon-magnon coupling in an ultralow damping all-magnetic-insulator heterostructure
Authors:
Jiacheng Liu,
Yuzan Xiong,
Jingming Liang,
Xuezhao Wu,
Chen Liu,
Shun Kong Cheung,
Zheyu Ren,
Ruizi Liu,
Andrew Christy,
Zehan Chen,
Ferris Prima Nugraha,
Xi-Xiang Zhang,
Chi Wah Leung,
Wei Zhang,
Qiming Shao
Abstract:
Magnetic insulators such as yttrium iron garnets (YIGs) are of paramount importance for spin-wave or magnonic devices as their ultralow damping enables ultralow power dissipation that is free of Joule heating, exotic magnon quantum state, and coherent coupling to other wave excitations. Magnetic insulator heterostructures bestow superior structural and magnetic properties and house immense design…
▽ More
Magnetic insulators such as yttrium iron garnets (YIGs) are of paramount importance for spin-wave or magnonic devices as their ultralow damping enables ultralow power dissipation that is free of Joule heating, exotic magnon quantum state, and coherent coupling to other wave excitations. Magnetic insulator heterostructures bestow superior structural and magnetic properties and house immense design space thanks to the strong and engineerable exchange interaction between individual layers. To fully unleash their potential, realizing low damping and strong exchange coupling simultaneously is critical, which often requires high quality interface. Here, we show that such a demand is realized in an all-insulator thulium iron garnet (TmIG)/YIG bilayer system. The ultralow dissipation rates in both YIG and TmIG, along with their significant spin-spin interaction at the interface, enable strong and coherent magnon-magnon coupling with a benchmarking cooperativity value larger than the conventional ferromagnetic metal-based heterostructures. The coupling strength can be tuned by varying the magnetic insulator layer thickness and magnon modes, which is consistent with analytical calculations and micromagnetic simulations. Our results demonstrate TmIG/YIG as a novel platform for investigating hybrid magnonic phenomena and open opportunities in magnon devices comprising all-insulator heterostructures.
△ Less
Submitted 6 September, 2023;
originally announced September 2023.
-
Quantum nonlinear spectroscopy via correlations of weak Faraday-rotation measurements
Authors:
Brian Chung Hang Cheung,
Ren-Bao Liu
Abstract:
The correlations of fluctuations are key to studying fundamental quantum physics and quantum many-body dynamics. They are also useful information for understanding and combating decoherence in quantum technology. Nonlinear spectroscopy and noise spectroscopy are powerful tools to characterize fluctuations, but they can access only very few among the many types of higher-order correlations. A syste…
▽ More
The correlations of fluctuations are key to studying fundamental quantum physics and quantum many-body dynamics. They are also useful information for understanding and combating decoherence in quantum technology. Nonlinear spectroscopy and noise spectroscopy are powerful tools to characterize fluctuations, but they can access only very few among the many types of higher-order correlations. A systematic quantum sensing approach, called quantum nonlinear spectroscopy (QNS), is recently proposed for extracting arbitrary types and orders of time-ordered correlations, using sequential weak measurement via a spin quantum sensor. However, the requirement of a central spin as the quantum sensor limits the versatility of the QNS since usually a central spin interacts only with a small number of particles in proximity and the measurement of single spins needs stringent conditions. Here we propose to employ the polarization (a pseudo-spin) of a coherent light beam as a quantum sensor for QNS. After interacting with a target system (such as a transparent magnetic material), the small Faraday rotation of the linearly polarized light can be measured, which constitutes a weak measurement of the magnetization in the target system. The correlated difference photon counts of a certain numbers of measurement shots can be made proportional to a certain type and order of correlations of the magnetic fluctuations in the material. This protocol of QNS is advantageous for studying quantum many-body systems.
△ Less
Submitted 31 August, 2023;
originally announced September 2023.
-
Determining Quasi-Equilibrium Electron and Hole Distributions of Plasmonic Photocatalysts using Photomodulated X-ray Absorption Spectroscopy
Authors:
Levi D. Palmer,
Wonseok Lee,
Chung Li Dong,
Ru-Shi Liu,
Nianqiang Wu,
Scott K. Cushing
Abstract:
Most photocatalytic and photovoltaic devices operate under broadband, constant illumination. Electron and hole dynamics in these devices, however, are usually measured using ultrafast pulsed lasers in a narrow wavelength range. In this work, we prove that steady-state, photomodulated X-ray spectra from a non-time-resolved synchrotron beamline can be used to estimate electron and hole distributions…
▽ More
Most photocatalytic and photovoltaic devices operate under broadband, constant illumination. Electron and hole dynamics in these devices, however, are usually measured using ultrafast pulsed lasers in a narrow wavelength range. In this work, we prove that steady-state, photomodulated X-ray spectra from a non-time-resolved synchrotron beamline can be used to estimate electron and hole distributions. A set of plasmonic metal core-shell nanoparticles is designed to systematically isolate photothermal, hot electron, and thermalized electron-hole pairs in a TiO2 shell. Steady-state changes in the Ti L2,3 edge are measured with and without continuous-wave illumination of the nanoparticle's localized surface plasmon resonance. Ab initio excited-state X-ray theory developed for transient X-ray measurements is then applied to model the experimental spectra in an attempt to extract the resultant steady-state carrier distributions. The results suggest that, within error, the quasi-equilibrium carrier distribution can be determined even from relatively noisy data with mixed excited-state phenomena.
△ Less
Submitted 24 January, 2024; v1 submitted 30 August, 2023;
originally announced August 2023.
-
"Zero change" platform for monolithic back-end-of-line integration of phase change materials in silicon photonics
Authors:
Maoliang Wei,
Kai Xu,
Bo Tang,
Junying Li,
Yiting Yun,
Peng Zhang,
Yingchun Wu,
Kangjian Bao,
Kunhao Lei,
Zequn Chen,
Hui Ma,
Chunlei Sun,
Ruonan Liu,
Ming Li,
Lan Li,
Hongtao Lin
Abstract:
Monolithic integration of novel materials for unprecedented device functions without modifying the existing photonic component library is the key to advancing heterogeneous silicon photonic integrated circuits. To achieve this, the introduction of a silicon nitride etching stop layer at selective area, coupled with low-loss oxide trench to waveguide surface, enables the incorporation of various fu…
▽ More
Monolithic integration of novel materials for unprecedented device functions without modifying the existing photonic component library is the key to advancing heterogeneous silicon photonic integrated circuits. To achieve this, the introduction of a silicon nitride etching stop layer at selective area, coupled with low-loss oxide trench to waveguide surface, enables the incorporation of various functional materials without disrupting the reliability of foundry-verified devices. As an illustration, two distinct chalcogenide phase change materials (PCM) with remarkable nonvolatile modulation capabilities, namely Sb2Se3 and Ge2Sb2Se4Te1, were monolithic back-end-of-line integrated into silicon photonics. The PCM enables compact phase and intensity tuning units with zero-static power consumption. Taking advantage of these building blocks, the phase error of a push-pull Mach-Zehnder interferometer optical switch could be trimmed by a nonvolatile phase shifter with a 48% peak power consumption reduction. Mirco-ring filters with a rejection ratio >25dB could be applied for >5-bit wavelength selective intensity modulation, and waveguide-based >7-bit intensity-modulation photonic attenuators could achieve >39dB broadband attenuation. The advanced "Zero change" back-end-of-line integration platform could not only facilitate the integration of PCMs for integrated reconfigurable photonics but also open up the possibilities for integrating other excellent optoelectronic materials in the future silicon photonic process design kits.
△ Less
Submitted 29 August, 2023;
originally announced August 2023.
-
Enhanced coherent light-matter interaction and room-temperature quantum yield of plasmonic resonances engineered by a chiral exceptional point
Authors:
Yuwei Lu,
Haoxiang Jiang,
Renming Liu
Abstract:
Strong dissipation of plasmonic resonances is detrimental to quantum manipulation. To enhance the quantum coherence, we propose to tailor the local density of states (LDOS) of plasmonic resonances by integrating with a photonic cavity operating at a chiral exceptional point (CEP), where the phase of light field can offer a new degree of freedom to flexibly manipulate the quantum states. A quantize…
▽ More
Strong dissipation of plasmonic resonances is detrimental to quantum manipulation. To enhance the quantum coherence, we propose to tailor the local density of states (LDOS) of plasmonic resonances by integrating with a photonic cavity operating at a chiral exceptional point (CEP), where the phase of light field can offer a new degree of freedom to flexibly manipulate the quantum states. A quantized few-mode theory is employed to reveal that the LDOS of the proposed hybrid cavity can evolve into sub-Lorentzian lineshape, with order-of-magnitude linewidth narrowing and additionally a maximum of eightfold enhancement compared to the usual plasmonic-photonic cavity without CEP. This results in the enhanced coherent light-matter interaction accompanied by the reduced dissipation of polaritonic states. Furthermore, a scattering theory based on eigenmode decomposition is present to elucidate two mechanisms responsible for the significant improvement of quantum yield at CEP, the reduction of plasmonic absorption by the Fano interference and the enhancement of cavity radiation through the superscattering. Importantly, we find the latter allows achieving a near-unity quantum yield at room temperature; in return, high quantum yield is beneficial to experimentally verify the enhanced LDOS at CEP by measuring the fluorescence lifetime of a quantum emitter. Therefore, our work demonstrates that the plasmonic resonances in CEP-engineered environment can serve as a promising platform for exploring the quantum states control by virtue of the non-Hermiticity of open optical resonators and building the high-performance quantum devices for sensing, spectroscopy, quantum information processing and quantum computing.
△ Less
Submitted 8 August, 2023;
originally announced August 2023.
-
The changing rule of human bone density with aging based on a novel definition and mensuration of bone density with computed tomography
Authors:
Linmi Tao,
Ruiyang Liu,
Yuanbiao Wang,
Yuezhi Zhou,
Li Huo,
Guilan Hu,
Xiangsong Zhang,
Zuo-Xiang He
Abstract:
Osteoporosis and fragility fractures have emerged as major public health concerns in an aging population. However, measuring age-related changes in bone density using dual-energy X-ray absorptiometry has limited personalized risk assessment due to susceptibility to interference from various factors. In this study, we propose an innovative statistical model of bone pixel distribution in fine-segmen…
▽ More
Osteoporosis and fragility fractures have emerged as major public health concerns in an aging population. However, measuring age-related changes in bone density using dual-energy X-ray absorptiometry has limited personalized risk assessment due to susceptibility to interference from various factors. In this study, we propose an innovative statistical model of bone pixel distribution in fine-segmented computed tomography (CT) images, along with a novel approach to measuring bone density based on CT values of bone pixels. Our findings indicate that bone density exhibits a linear decline with age during adulthood between the ages of 39 and 80, with the rate of decline being approximately 1.6 times faster in women than in men. This contradicts the widely accepted notion that bone density starts declining in women at menopause and in men at around 50 years of age. The linearity of age-related changes provides further insights into the dynamics of the aging human body. Consequently, our findings suggest that the definition of osteoporosis by the World Health Organization should be revised to the standard deviation of age-based bone density. Furthermore, these results open up new avenues for research in bone health care and clinical investigation of osteoporosis.
△ Less
Submitted 5 August, 2023;
originally announced August 2023.
-
Unsupervised Learning of Part Similarity for Goal-Guided Accelerated Experiment Design in Metal Additive Manufacturing
Authors:
Rui Liu,
Sen Liu,
Xiaoli Zhang
Abstract:
Metal additive manufacturing is gaining broad interest and increased use in the industrial and academic fields. However, the quantification and commercialization of standard parts usually require extensive experiments and expensive post-characterization, which impedes the rapid development and adaptation of metal AM technologies. In this work, a similarity-based acceleration (S-acceleration) metho…
▽ More
Metal additive manufacturing is gaining broad interest and increased use in the industrial and academic fields. However, the quantification and commercialization of standard parts usually require extensive experiments and expensive post-characterization, which impedes the rapid development and adaptation of metal AM technologies. In this work, a similarity-based acceleration (S-acceleration) method for design of experiments is developed to reduce the time and costs associated with unveiling process-property (porosity defects) relationships during manufacturing. With S-acceleration, part semantic features from machine-setting parameters and physics-effects informed characteristics are explored for measuring mutual part similarities. A user-defined simplification rate of experiments is proposed to purposely remove redundant parts before conducting experiments printing without sacrificing information gain as original full factorial experiment design. This S-acceleration design of experiments is demonstrated on a Concept Laser M2 machine for the experimental plan of modeling relationships between process parameters and part porosity defects. The printed part has 2 mm diameter by 4 mm tall pin geometry considering variations in build location and orientation, laser settings and powder feedstock are held constant. In total, 242 parts are measured to create a ground truth data set of porosity levels by using X-ray tomography microscopy. The S-acceleration method is assessed for performance considering 40%, 50%, and 60% of user-defined experiment simplification rates. The repeated experiments are removed without ignoring the minority experiments outlier, assuring a similar process-property relation in the original experiment plan. The experiment number is significantly reduced based on part similarity with minimal compromise of model accuracy and obtained knowledge.
△ Less
Submitted 29 May, 2024; v1 submitted 3 August, 2023;
originally announced August 2023.
-
Graphene/silicon heterojunction for reconfigurable phase-relevant activation function in coherent optical neural networks
Authors:
Chuyu Zhong,
Kun Liao,
Tianxiang Dai,
Maoliang Wei,
Hui Ma,
Jianghong Wu,
Zhibin Zhang,
Yuting Ye,
Ye Luo,
Zequn Chen,
Jialing Jian,
Chulei Sun,
Bo Tang,
Peng Zhang,
Ruonan Liu,
Junying Li,
Jianyi Yang,
Lan Li,
Kaihui Liu,
Xiaoyong Hu,
Hongtao Lin
Abstract:
Optical neural networks (ONNs) herald a new era in information and communication technologies and have implemented various intelligent applications. In an ONN, the activation function (AF) is a crucial component determining the network performances and on-chip AF devices are still in development. Here, we first demonstrate on-chip reconfigurable AF devices with phase activation fulfilled by dual-f…
▽ More
Optical neural networks (ONNs) herald a new era in information and communication technologies and have implemented various intelligent applications. In an ONN, the activation function (AF) is a crucial component determining the network performances and on-chip AF devices are still in development. Here, we first demonstrate on-chip reconfigurable AF devices with phase activation fulfilled by dual-functional graphene/silicon (Gra/Si) heterojunctions. With optical modulation and detection in one device, time delays are shorter, energy consumption is lower, reconfigurability is higher and the device footprint is smaller than other on-chip AF strategies. The experimental modulation voltage (power) of our Gra/Si heterojunction achieves as low as 1 V (0.5 mW), superior to many pure silicon counterparts. In the photodetection aspect, a high responsivity of over 200 mA/W is realized. Special nonlinear functions generated are fed into a complex-valued ONN to challenge handwritten letters and image recognition tasks, showing improved accuracy and potential of high-efficient, all-component-integration on-chip ONN. Our results offer new insights for on-chip ONN devices and pave the way to high-performance integrated optoelectronic computing circuits.
△ Less
Submitted 13 July, 2023;
originally announced July 2023.
-
Sequential Flipping: A Donor-Acceptor Exchange Mechanism in Water Trimer
Authors:
Xinrui Yang,
Rui Liu,
Ruiqi Xu,
Zhigang Wang
Abstract:
The donor-acceptor exchange (DAE) is a significant hydrogen bond network rearrangement (HBNR) mechanism because it can lead to the change of hydrogen bond direction. In this work, we report a new DAE mechanism found in water trimer that is realized by sequential flipping (SF) of all molecules rather than the well-known proton transfer (PT) process. Meanwhile, the SF process has a much smaller pote…
▽ More
The donor-acceptor exchange (DAE) is a significant hydrogen bond network rearrangement (HBNR) mechanism because it can lead to the change of hydrogen bond direction. In this work, we report a new DAE mechanism found in water trimer that is realized by sequential flipping (SF) of all molecules rather than the well-known proton transfer (PT) process. Meanwhile, the SF process has a much smaller potential barrier (0.262 eV) than the previously predicted collective rotation process (about 1.7 eV), implying that SF process is a main flipping process that can lead to DAE. Importantly, high-precision ab initio calculations show that SF-DAE can make the water ring to show a clear chiral difference from PT-DAE, which brings the prospect of distinguishing the two confusing processes based on circular dichroism spectra. The reaction rate analysis including the quantum tunneling indicates an obvious temperature-dependent competitive relationship between SF and PT processes, specifically, the SF process dominates above 65 K, while the PT process dominates below 65 K. Therefore, in most cases, the contribution for DAE mainly comes from the flipping process, rather than the PT process as previously thought. Our work enriches the understanding of the DAE mechanism in water trimer and provides a piece of the jigsaw that has been sought to the HBNR mechanism.
△ Less
Submitted 19 June, 2023;
originally announced June 2023.
-
Cascading failure with memory effect in random networks
Authors:
Yanpeng Zhu,
Lei Chen,
Fanyuan Meng,
Chun-Xiao Jia,
Run-Ran Liu
Abstract:
In many cases of attacks or failures, memory effects play a significant role. Therefore, we present a model that not only considers the dependencies between nodes but also incorporates the memory effects of attacks. Our research demonstrates that the survival probability of a random node reached by a random edge surpasses the inverse of the average degree ($1/{\langle k \rangle}$), and a giant com…
▽ More
In many cases of attacks or failures, memory effects play a significant role. Therefore, we present a model that not only considers the dependencies between nodes but also incorporates the memory effects of attacks. Our research demonstrates that the survival probability of a random node reached by a random edge surpasses the inverse of the average degree ($1/{\langle k \rangle}$), and a giant component emerges regardless of the strength of dependencies. Moreover, if the dependency strength exceeds $1/{\langle k \rangle}$, the network experiences an abrupt collapse when an infinitesimally small fraction of nodes is removed, irrespective of the memory effect. Our proposed model provides insights into the interplay between dependencies between nodes, memory effects, and the network structures under attacks or failures. By considering these factors, we can better assess the vulnerability of complex systems and develop strategies to mitigate cascading failures.
△ Less
Submitted 18 June, 2023;
originally announced June 2023.
-
Modeling Dynamic Heterogeneous Graph and Node Importance for Future Citation Prediction
Authors:
Hao Geng,
Deqing Wang,
Fuzhen Zhuang,
Xuehua Ming,
Chenguang Du,
Ting Jiang,
Haolong Guo,
Rui Liu
Abstract:
Accurate citation count prediction of newly published papers could help editors and readers rapidly figure out the influential papers in the future. Though many approaches are proposed to predict a paper's future citation, most ignore the dynamic heterogeneous graph structure or node importance in academic networks. To cope with this problem, we propose a Dynamic heterogeneous Graph and Node Impor…
▽ More
Accurate citation count prediction of newly published papers could help editors and readers rapidly figure out the influential papers in the future. Though many approaches are proposed to predict a paper's future citation, most ignore the dynamic heterogeneous graph structure or node importance in academic networks. To cope with this problem, we propose a Dynamic heterogeneous Graph and Node Importance network (DGNI) learning framework, which fully leverages the dynamic heterogeneous graph and node importance information to predict future citation trends of newly published papers. First, a dynamic heterogeneous network embedding module is provided to capture the dynamic evolutionary trends of the whole academic network. Then, a node importance embedding module is proposed to capture the global consistency relationship to figure out each paper's node importance. Finally, the dynamic evolutionary trend embeddings and node importance embeddings calculated above are combined to jointly predict the future citation counts of each paper, by a log-normal distribution model according to multi-faced paper node representations. Extensive experiments on two large-scale datasets demonstrate that our model significantly improves all indicators compared to the SOTA models.
△ Less
Submitted 27 May, 2023;
originally announced May 2023.
-
The Lobster Eye Imager for Astronomy Onboard the SATech-01 Satellite
Authors:
Z. X. Ling,
X. J. Sun,
C. Zhang,
S. L. Sun,
G. Jin,
S. N. Zhang,
X. F. Zhang,
J. B. Chang,
F. S. Chen,
Y. F. Chen,
Z. W. Cheng,
W. Fu,
Y. X. Han,
H. Li,
J. F. Li,
Y. Li,
Z. D. Li,
P. R. Liu,
Y. H. Lv,
X. H. Ma,
Y. J. Tang,
C. B. Wang,
R. J. Xie,
Y. L. Xue,
A. L. Yan
, et al. (101 additional authors not shown)
Abstract:
The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (Fo…
▽ More
The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (FoV) of 346 square degrees (18.6 degrees * 18.6 degrees) of the X-ray imager is realized. An optical assembly composed of 36 MPO chips is used to focus incident X-ray photons, and four large-format complementary metal-oxide semiconductor (CMOS) sensors, each of 6 cm * 6 cm, are used as the focal plane detectors. The instrument has an angular resolution of 4 - 8 arcmin (in FWHM) for the central focal spot of the point spread function, and an effective area of 2 - 3 cm2 at 1 keV in essentially all the directions within the field of view. The detection passband is 0.5 - 4 keV in the soft X-rays and the sensitivity is 2 - 3 * 10-11 erg s-1 cm-2 (about 1 mini-Crab) at 1,000 second observation. The total weight of LEIA is 56 kg and the power is 85 W. The satellite, with a design lifetime of 2 years, operates in a Sun-synchronous orbit of 500 km with an orbital period of 95 minutes. LEIA is paving the way for future missions by verifying in flight the technologies of both novel focusing imaging optics and CMOS sensors for X-ray observation, and by optimizing the working setups of the instrumental parameters. In addition, LEIA is able to carry out scientific observations to find new transients and to monitor known sources in the soft X-ray band, albeit limited useful observing time available.
△ Less
Submitted 24 May, 2023;
originally announced May 2023.
-
Integrated optical frequency division for stable microwave and mmWave generation
Authors:
Shuman Sun,
Beichen Wang,
Kaikai Liu,
Mark Harrington,
Fatemehsadat Tabatabaei,
Ruxuan Liu,
Jiawei Wang,
Samin Hanifi,
Jesse S. Morgan,
Mandana Jahanbozorgi,
Zijiao Yang,
Steven Bowers,
Paul Morton,
Karl Nelson,
Andreas Beling,
Daniel Blumenthal,
Xu Yi
Abstract:
The generation of ultra-low noise microwave and mmWave in miniaturized, chip-based platforms can transform communication, radar, and sensing systems. Optical frequency division that leverages optical references and optical frequency combs has emerged as a powerful technique to generate microwaves with superior spectral purity than any other approaches. We demonstrate a miniaturized optical frequen…
▽ More
The generation of ultra-low noise microwave and mmWave in miniaturized, chip-based platforms can transform communication, radar, and sensing systems. Optical frequency division that leverages optical references and optical frequency combs has emerged as a powerful technique to generate microwaves with superior spectral purity than any other approaches. We demonstrate a miniaturized optical frequency division system that can potentially transfer the approach to a CMOS-compatible integrated photonic platform. Phase stability is provided by a large-mode-volume, planar-waveguide-based optical reference coil cavity and is divided down from optical to mmWave frequency by using soliton microcombs generated in a waveguide-coupled microresonator. Besides achieving record-low phase noise for integrated photonic microwave/mmWave oscillators, these devices can be heterogeneously integrated with semiconductor lasers, amplifiers, and photodiodes, holding the potential of large-volume, low-cost manufacturing for fundamental and mass-market applications.
△ Less
Submitted 30 May, 2023; v1 submitted 22 May, 2023;
originally announced May 2023.
-
Modeling opinion polarization under perception bias
Authors:
Hao Yu,
Bin Xue,
Yanpeng Zhu,
Jianlin Zhang,
Run-Ran Liu,
Yu Liu,
Fanyuan Meng
Abstract:
Social networks have provided a platform for the effective exchange of ideas or opinions but also served as a hotbed of polarization. While much research attempts to explore different causes of opinion polarization, the effect of perception bias caused by the network structure itself is largely understudied. To this end, we propose a threshold model that simulates the evolution of opinions by taki…
▽ More
Social networks have provided a platform for the effective exchange of ideas or opinions but also served as a hotbed of polarization. While much research attempts to explore different causes of opinion polarization, the effect of perception bias caused by the network structure itself is largely understudied. To this end, we propose a threshold model that simulates the evolution of opinions by taking into account the perception bias, which is the gap between global information and locally available information from the neighborhood within networks. Our findings suggest that polarization occurs when the collective stubbornness of the population exceeds a critical value which is largely affected by the perception bias. In addition, as the level of stubbornness grows, the occurrence of first-order and second-order phase transitions between consensus and polarization becomes more prevalent, and the types of these phase transitions rely on the initial proportion of active opinions. Notably, for regular network structures, a step-wise pattern emerges that corresponds to various levels of polarization and is strongly associated with the formation of echo chambers. Our research presents a valuable framework for investigating the connection between perception bias and opinion polarization and provides valuable insights for mitigating polarization in the context of biased information.
△ Less
Submitted 10 May, 2023;
originally announced May 2023.
-
Ergodicity breaking in rapidly rotating C60 fullerenes
Authors:
Lee R. Liu,
Dina Rosenberg,
P. Bryan Changala,
Philip J. D. Crowley,
David J. Nesbitt,
Norman Y. Yao,
Timur Tscherbul,
Jun Ye
Abstract:
Ergodicity, the central tenet of statistical mechanics, requires that an isolated system will explore all of its available phase space permitted by energetic and symmetry constraints. Mechanisms for violating ergodicity are of great interest for probing non-equilibrium matter and for protecting quantum coherence in complex systems. For decades, polyatomic molecules have served as an intriguing and…
▽ More
Ergodicity, the central tenet of statistical mechanics, requires that an isolated system will explore all of its available phase space permitted by energetic and symmetry constraints. Mechanisms for violating ergodicity are of great interest for probing non-equilibrium matter and for protecting quantum coherence in complex systems. For decades, polyatomic molecules have served as an intriguing and challenging platform for probing ergodicity breaking in vibrational energy transport, particularly in the context of controlling chemical reactions. Here, we report the observation of rotational ergodicity breaking in an unprecedentedly large and symmetric molecule, 12C60. This is facilitated by the first ever observation of icosahedral ro-vibrational fine structure in any physical system, first predicted for 12C60 in 1986. The ergodicity breaking exhibits several surprising features: first, there are multiple transitions between ergodic and non-ergodic regimes as the total angular momentum is increased, and second, they occur well below the traditional vibrational ergodicity threshold. These peculiar dynamics result from the molecules' unique combination of symmetry, size, and rigidity, highlighting the potential of fullerenes to uncover emergent phenomena in mesoscopic quantum systems.
△ Less
Submitted 9 May, 2023;
originally announced May 2023.
-
Single-pixel transmission matrix recovery via 2-photon fluorescence
Authors:
Shupeng Zhao,
Bernhard Rauer,
Lorenzo Valzania,
Jonathan Dong,
Ruifeng Liu,
Fuli Li,
Sylvain Gigan,
Hilton B. de Aguiar
Abstract:
Imaging at depth in opaque materials has long been a challenge. Recently, wavefront shaping has enabled significant advance for deep imaging. Nevertheless, most non-invasive wavefront shaping methods require cameras, lack the sensitivity for deep imaging under weak optical signals, or can only focus on a single "guidestar". Here, we retrieve the transmission matrix (TM) non-invasively using two-ph…
▽ More
Imaging at depth in opaque materials has long been a challenge. Recently, wavefront shaping has enabled significant advance for deep imaging. Nevertheless, most non-invasive wavefront shaping methods require cameras, lack the sensitivity for deep imaging under weak optical signals, or can only focus on a single "guidestar". Here, we retrieve the transmission matrix (TM) non-invasively using two-photon fluorescence exploiting a general single-pixel detection framework, allowing to achieve single-target focus on multiple guidestars spread beyond the memory effect range. In addition, if we assume memory effect correlations exist in the transmission matrix, we are able to significantly reduce the number of measurements needed.
△ Less
Submitted 5 May, 2023;
originally announced May 2023.
-
Measurement of Atmospheric Neutrino Mixing with Improved IceCube DeepCore Calibration and Data Processing
Authors:
IceCube Collaboration,
R. Abbasi,
M. Ackermann,
J. Adams,
S. K. Agarwalla,
J. A. Aguilar,
M. Ahlers,
J. M. Alameddine,
N. M. Amin,
K. Andeen,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
S. N. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
V. Basu,
R. Bay,
J. J. Beatty,
K. -H. Becker,
J. Becker Tjus,
J. Beise
, et al. (383 additional authors not shown)
Abstract:
We describe a new data sample of IceCube DeepCore and report on the latest measurement of atmospheric neutrino oscillations obtained with data recorded between 2011-2019. The sample includes significant improvements in data calibration, detector simulation, and data processing, and the analysis benefits from a detailed treatment of systematic uncertainties, with significantly higher level of detai…
▽ More
We describe a new data sample of IceCube DeepCore and report on the latest measurement of atmospheric neutrino oscillations obtained with data recorded between 2011-2019. The sample includes significant improvements in data calibration, detector simulation, and data processing, and the analysis benefits from a detailed treatment of systematic uncertainties, with significantly higher level of detail since our last study. By measuring the relative fluxes of neutrino flavors as a function of their reconstructed energies and arrival directions we constrain the atmospheric neutrino mixing parameters to be $\sin^2θ_{23} = 0.51\pm 0.05$ and $Δm^2_{32} = 2.41\pm0.07\times 10^{-3}\mathrm{eV}^2$, assuming a normal mass ordering. The resulting 40\% reduction in the error of both parameters with respect to our previous result makes this the most precise measurement of oscillation parameters using atmospheric neutrinos. Our results are also compatible and complementary to those obtained using neutrino beams from accelerators, which are obtained at lower neutrino energies and are subject to different sources of uncertainties.
△ Less
Submitted 8 August, 2023; v1 submitted 24 April, 2023;
originally announced April 2023.
-
Thickness-dependent magnetic properties in Pt[CoNi]n multilayers with perpendicular magnetic anisotropy
Authors:
Chunjie Yan,
Lina Chen,
Kaiyuan Zhou,
Liupeng Yang,
Qingwei Fu,
Wenqiang Wang,
Wen-Cheng Yue,
Like Liang,
Zui Tao,
Jun Du,
Yong-Lei Wang,
Ronghua Liu
Abstract:
We systematically investigated the Ni and Co thickness-dependent perpendicular magnetic anisotropy (PMA) coefficient, magnetic domain structures, and magnetization dynamics of Pt(5 nm)/[Co(t_Co nm)/Ni(t_Ni nm)]5/Pt(1 nm) multilayers by combining the four standard magnetic characterization techniques. The magnetic-related hysteresis loops obtained from the field-dependent magnetization M and anomal…
▽ More
We systematically investigated the Ni and Co thickness-dependent perpendicular magnetic anisotropy (PMA) coefficient, magnetic domain structures, and magnetization dynamics of Pt(5 nm)/[Co(t_Co nm)/Ni(t_Ni nm)]5/Pt(1 nm) multilayers by combining the four standard magnetic characterization techniques. The magnetic-related hysteresis loops obtained from the field-dependent magnetization M and anomalous Hall resistivity (AHR) \r{ho}_xy found that the two serial multilayers with t_Co = 0.2 and 0.3 nm have the optimum PMA coefficient K_U well as the highest coercivity H_C at the Ni thickness t_Ni = 0.6 nm. Additionally, the magnetic domain structures obtained by Magneto-optic Kerr effect (MOKE) microscopy also significantly depend on the thickness and K_U of the films. Furthermore, the thickness-dependent linewidth of ferromagnetic resonance is inversely proportional to K_U and H_C, indicating that inhomogeneous magnetic properties dominate the linewidth. However, the intrinsic Gilbert damping constant determined by a linear fitting of frequency-dependent linewidth does not depend on Ni thickness and K_U. Our results could help promote the PMA [Co/Ni] multilayer applications in various spintronic and spin-orbitronic devices.
△ Less
Submitted 18 April, 2023;
originally announced April 2023.
-
Stochastic spin-orbit-torque device as the STDP synapse for spiking neural networks
Authors:
Haotian Li,
Liyuan Li,
Kaiyuan Zhou,
Chunjie Yan,
Zhenyu Gao,
Zishuang Li,
Ronghua Liu
Abstract:
Neuromorphic hardware as a non-Von Neumann architecture has better energy efficiency and parallelism than the conventional computer. Here, with numerical modeling spin-orbit torque (SOT) device using current-induced SOT and Joule heating effects, we acquire its magnetization switching probability as a function of the input current pulses and use it to mimic the spike-timing-dependent plasticity le…
▽ More
Neuromorphic hardware as a non-Von Neumann architecture has better energy efficiency and parallelism than the conventional computer. Here, with numerical modeling spin-orbit torque (SOT) device using current-induced SOT and Joule heating effects, we acquire its magnetization switching probability as a function of the input current pulses and use it to mimic the spike-timing-dependent plasticity learning behavior like actual brain working. We further demonstrate that the artificial spiking neural network (SNN) built by this SOT device can perform unsupervised handwritten digit recognition with the accuracy of 80% and logic operation learning. Our work provides a new clue to achieving SNN-based neuromorphic hardware using high-energy efficiency and nonvolatile spintronics nanodevices
△ Less
Submitted 18 April, 2023;
originally announced April 2023.
-
Nuclear recoil response of liquid xenon and its impact on solar 8B neutrino and dark matter searches
Authors:
X. Xiang,
R. J. Gaitskell,
R. Liu,
J. Bang,
J. Xu,
W. H. Lippincott,
J. Aalbers,
J. E. Y. Dobson,
M. Szydagis,
G. R. C. Rischbieter,
N. Parveen,
D. Q. Huang,
I. Olcina,
R. J. James,
J. A. Nikoleyczik
Abstract:
Knowledge of the ionization and scintillation responses of liquid xenon (LXe) to nuclear recoils is crucial for LXe-based dark matter experiments. Current calibrations carry large uncertainties in the low-energy region below $\sim3$ keV$_nr$ where signals from dark matter particles of $<$10 GeV/c$^2$ masses are expected. The coherent elastic neutrino-nucleus scattering (CE$ν$NS) by solar $^8$B neu…
▽ More
Knowledge of the ionization and scintillation responses of liquid xenon (LXe) to nuclear recoils is crucial for LXe-based dark matter experiments. Current calibrations carry large uncertainties in the low-energy region below $\sim3$ keV$_nr$ where signals from dark matter particles of $<$10 GeV/c$^2$ masses are expected. The coherent elastic neutrino-nucleus scattering (CE$ν$NS) by solar $^8$B neutrinos also results in a continuum of nuclear recoil events below 3.0 keV$_{nr}$ (99\% of events), which further complicates low-mass dark matter searches in LXe experiments. In this paper, we describe a method to quantify the uncertainties of low-energy LXe responses using published calibration data, followed by case studies to evaluate the impact of yield uncertainties on ${^8}$B searches and low-mass dark matter sensitivity in a typical ton-scale LXe experiment. We conclude that naively omitting yield uncertainties leads to overly optimistic limits by factor $\sim2$ for a 6 GeV/c$^2$ WIMP mass. Future nuclear recoil light yield calibrations could allow experiments to recover this sensitivity and also improve the accuracy of solar ${^8}$B flux measurements.
△ Less
Submitted 12 April, 2023;
originally announced April 2023.
-
A first test of CUPID prototypal light detectors with NTD-Ge sensors in a pulse-tube cryostat
Authors:
CUPID collaboration,
K. Alfonso,
A. Armatol,
C. Augier,
F. T. Avignone III,
O. Azzolini,
M. Balata,
A. S. Barabash,
G. Bari,
A. Barresi,
D. Baudin,
F. Bellini,
G. Benato,
V. Berest,
M. Beretta,
M. Bettelli,
M. Biassoni,
J. Billard,
V. Boldrini,
A. Branca,
C. Brofferio,
C. Bucci,
J. Camilleri,
A. Campani,
C. Capelli
, et al. (154 additional authors not shown)
Abstract:
CUPID is a next-generation bolometric experiment aiming at searching for neutrinoless double-beta decay with ~250 kg of isotopic mass of $^{100}$Mo. It will operate at $\sim$10 mK in a cryostat currently hosting a similar-scale bolometric array for the CUORE experiment at the Gran Sasso National Laboratory (Italy). CUPID will be based on large-volume scintillating bolometers consisting of…
▽ More
CUPID is a next-generation bolometric experiment aiming at searching for neutrinoless double-beta decay with ~250 kg of isotopic mass of $^{100}$Mo. It will operate at $\sim$10 mK in a cryostat currently hosting a similar-scale bolometric array for the CUORE experiment at the Gran Sasso National Laboratory (Italy). CUPID will be based on large-volume scintillating bolometers consisting of $^{100}$Mo-enriched Li$_2$MoO$_4$ crystals, facing thin Ge-wafer-based bolometric light detectors. In the CUPID design, the detector structure is novel and needs to be validated. In particular, the CUORE cryostat presents a high level of mechanical vibrations due to the use of pulse tubes and the effect of vibrations on the detector performance must be investigated. In this paper we report the first test of the CUPID-design bolometric light detectors with NTD-Ge sensors in a dilution refrigerator equipped with a pulse tube in an above-ground lab. Light detectors are characterized in terms of sensitivity, energy resolution, pulse time constants, and noise power spectrum. Despite the challenging noisy environment due to pulse-tube-induced vibrations, we demonstrate that all the four tested light detectors comply with the CUPID goal in terms of intrinsic energy resolution of 100 eV RMS baseline noise. Indeed, we have measured 70--90 eV RMS for the four devices, which show an excellent reproducibility. We have also obtained outstanding energy resolutions at the 356 keV line from a $^{133}$Ba source with one light detector achieving 0.71(5) keV FWHM, which is -- to our knowledge -- the best ever obtained when compared to $γ$ detectors of any technology in this energy range.
△ Less
Submitted 10 April, 2023;
originally announced April 2023.
-
Twelve-crystal prototype of Li$_2$MoO$_4$ scintillating bolometers for CUPID and CROSS experiments
Authors:
CUPID,
CROSS collaborations,
:,
K. Alfonso,
A. Armatol,
C. Augier,
F. T. Avignone III,
O. Azzolini,
M. Balata,
I. C. Bandac,
A. S. Barabash,
G. Bari,
A. Barresi,
D. Baudin,
F. Bellini,
G. Benato,
V. Berest,
M. Beretta,
M. Bettelli,
M. Biassoni,
J. Billard,
V. Boldrini,
A. Branca,
C. Brofferio,
C. Bucci
, et al. (160 additional authors not shown)
Abstract:
An array of twelve 0.28 kg lithium molybdate (LMO) low-temperature bolometers equipped with 16 bolometric Ge light detectors, aiming at optimization of detector structure for CROSS and CUPID double-beta decay experiments, was constructed and tested in a low-background pulse-tube-based cryostat at the Canfranc underground laboratory in Spain. Performance of the scintillating bolometers was studied…
▽ More
An array of twelve 0.28 kg lithium molybdate (LMO) low-temperature bolometers equipped with 16 bolometric Ge light detectors, aiming at optimization of detector structure for CROSS and CUPID double-beta decay experiments, was constructed and tested in a low-background pulse-tube-based cryostat at the Canfranc underground laboratory in Spain. Performance of the scintillating bolometers was studied depending on the size of phonon NTD-Ge sensors glued to both LMO and Ge absorbers, shape of the Ge light detectors (circular vs. square, from two suppliers), in different light collection conditions (with and without reflector, with aluminum coated LMO crystal surface). The scintillating bolometer array was operated over 8 months in the low-background conditions that allowed to probe a very low, $μ$Bq/kg, level of the LMO crystals radioactive contamination by $^{228}$Th and $^{226}$Ra.
△ Less
Submitted 10 April, 2023;
originally announced April 2023.
-
Characterization of the Hydrogen-Bond Network in High-Pressure Water by Deep Potential Molecular Dynamics
Authors:
Renxi Liu,
Mohan Chen
Abstract:
The hydrogen-bond (H-bond) network of high-pressure water is investigated by neural-network-based molecular dynamics (MD) simulations with the first-principles accuracy. The static structure factors (SSFs) of water at three densities, i.e., 1, 1.115 and 1.24 g/cm3 are directly evaluated from 512-water MD trajectories, which are in quantitative agreement with the experiments. We propose a new metho…
▽ More
The hydrogen-bond (H-bond) network of high-pressure water is investigated by neural-network-based molecular dynamics (MD) simulations with the first-principles accuracy. The static structure factors (SSFs) of water at three densities, i.e., 1, 1.115 and 1.24 g/cm3 are directly evaluated from 512-water MD trajectories, which are in quantitative agreement with the experiments. We propose a new method to decompose the computed SSF and identify the changes in SSF with respect to the changes in H-bond structures. We find a larger water density results in a higher probability for one or two non-H-bonded water molecules to be inserted into the inner shell, explaining the changes in the tetrahedrality of water under pressure. We predict that the structure of the accepting end of water molecules is more easily influenced by the pressure than the donating end. Our work sheds new light on explaining the SSF and H-bond properties in related fields.
△ Less
Submitted 3 August, 2023; v1 submitted 24 March, 2023;
originally announced March 2023.
-
The JUNO experiment Top Tracker
Authors:
JUNO Collaboration,
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Abid Aleem,
Tsagkarakis Alexandros,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Weidong Bai,
Nikita Balashov,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato
, et al. (592 additional authors not shown)
Abstract:
The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector…
▽ More
The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector, covering about 60% of the surface above them. The JUNO Top Tracker is constituted by the decommissioned OPERA experiment Target Tracker modules. The technology used consists in walls of two planes of plastic scintillator strips, one per transverse direction. Wavelength shifting fibres collect the light signal emitted by the scintillator strips and guide it to both ends where it is read by multianode photomultiplier tubes. Compared to the OPERA Target Tracker, the JUNO Top Tracker uses new electronics able to cope with the high rate produced by the high rock radioactivity compared to the one in Gran Sasso underground laboratory. This paper will present the new electronics and mechanical structure developed for the Top Tracker of JUNO along with its expected performance based on the current detector simulation.
△ Less
Submitted 9 March, 2023;
originally announced March 2023.