Timber, Noise, and Hearing Loss: A Look into the Forestry and Logging Industry
Posted on by![](https://blogs.cdc.gov/wp-content/uploads/sites/22/2018/05/ThinkstockPhotos-526747613-200x300.jpg)
We use our senses for many things. Take away or weaken one, such as hearing, and many things around us begin to change. Unexpectedly, the conversation across the room becomes more difficult to hear. Our favorite song on the radio doesn’t sound quite the same. This can become very frustrating for the person affected.
Hearing loss is common, especially among workers who are exposed to hazardous noise where they work. What exactly is “hazardous noise”? Noise is considered hazardous when it reaches 85 decibels (dBA) or more. In other words, when a person needs to raise his/her voice to speak with someone at arm’s length or about 3 feet away, a person is likely being exposed to noise that can potentially damage his/her hearing over time. This exposure to hazardous noise and/or chemicals that can damage hearing may lead to hearing loss linked to the workplace, also known as occupational hearing loss.
The risk of developing hearing loss varies by industry. The National Institute for Occupational Safety and Health (NIOSH) recently looked at one particular industry sector in its paper: Prevalence of hearing loss among noise-exposed workers within the Agriculture, Forestry, Fishing, and Hunting sector, 2003-2012. This study looked at the number of workers in this industry sector that had a material hearing impairment, which is hearing loss that interferes with understanding speech. We’ll call it hearing loss in this blog.
Agriculture, Forestry, Fishing, and Hunting is among the top industry sectors for worker exposure to hazardous noise that can contribute to hearing loss (37% exposed vs. 25% for all industries combined). Hearing loss within Forestry and Logging, an industry within this sector, is more pervasive. Noise-exposed workers in Forestry and Logging had a higher percentage of hearing loss (21%) than all noise-exposed industries combined (19%). To put this into perspective, a different study found that only 7% of non-noise-exposed workers reported hearing difficulty. Worker tasks in Forestry and Logging include:
- managing forest nurseries
- tending to timber tracts (plots of land selected for collecting timber)
- gathering forest products
- harvesting standing trees for timber
Activities associated with these tasks, such as unlatching cables used to hold and move logs (92 dBA) and the use of chainsaws (91-110 dBA), represent some of the highest noise exposures to this industry’s workers, and overall average exposures in some occupations have been shown to range from 97-102 dBA. These noise exposures, among others, contribute to the elevated prevalence of hearing loss seen in this industry.
Within Forestry and Logging, Forest Nurseries and Gathering of Forest Products had the highest prevalence of hearing loss (36%). This represents the highest prevalence within Agriculture, Forestry, Fishing, and Hunting.
Fortunately, there are effective methods for preventing worker hearing loss from noise. Reducing the noise, preferably at the source, is always the first and best step. To further reduce worker exposure to hazardous noise and minimize hearing loss within Forestry and Logging, this industry can:
- Enclose engines and heavy equipment workstations to contain the noise
- Install silencers and mufflers on equipment
- Reduce exposure time for workers operating noisy equipment
- Perform maintenance of hand tools and vehicle systems
- Ensure that workers consistently wear properly-fitted hearing protection every time they are in noisy areas or using noisy equipment
- Make sure that employees receive regular monitoring for changes in their hearing, so that additional measures to limit the progression of any detected hearing loss can be taken
There are also activities within Forestry and Logging that can expose workers to vibration, which may also contribute to the risk of hearing loss through suspected changes to the blood-flow within the inner ear. Vibration exposure can be reduced through routine maintenance of equipment and the use of anti-vibration chainsaws and gloves.
Visit our website for more information on occupational hearing loss surveillance and links to resources to protect worker hearing.
If you work in this industry, please share your experiences with reducing noise and improving worker safety and health.
Sean Lawson, BS, BA, and Elizabeth Masterson, PhD, CPH, COHC
Mr. Lawson is an Epidemiological Intern in the NIOSH Division of Surveillance, Hazard Evaluations and Field Studies.
Dr. Masterson is an Epidemiologist in the NIOSH Division of Surveillance, Hazard Evaluations and Field Studies.
4 comments on “Timber, Noise, and Hearing Loss: A Look into the Forestry and Logging Industry”
Comments listed below are posted by individuals not associated with CDC, unless otherwise stated. These comments do not represent the official views of CDC, and CDC does not guarantee that any information posted by individuals on this site is correct, and disclaims any liability for any loss or damage resulting from reliance on any such information. Read more about our comment policy ».
In this timber industry, many workers will have Hand-Arm Vibration Exposure from the Chainsaw work simultantaneously, I think.
How do we prevent the Hand-Arm Vibration Syndrome and Hearing Loss?
That’s a very interesting question, thank you. What NIOSH recommends for limiting hearing loss and hand-arm vibration does have some overlap. It is important to limit the noise and vibration at the source. When feasible, low-noise, low-vibration equipment should be provided and used. Sound and vibration level information can be found in manufacturer’s product and technical brochures. If noisy or high-vibration equipment must be used, reducing the duration or number of tasks that require the use of this equipment can also decrease exposures. We also recommend that workers that are performing noisy or high vibration tasks take breaks or are rotated periodically to other tasks that have lower exposures.
In addition, regularly maintaining tools and equipment according to manufacturer’s recommendations can limit noise and vibration. Personal protective equipment, such as properly fitted ear plugs and ear muffs, can reduce a worker’s exposure to noise. For hand-arm vibration specifically, keeping hands warm and dry appears important to limiting vibration syndrome. For both hearing loss and vibration syndrome, it is essential that at risk workers are educated about and monitored regularly for signs and symptoms. For more information about hand-arm vibration and vibration syndrome, we’d like to direct you to a previous NIOSH publication: https://www.cdc.gov/niosh/docs/83-110/default.html.
Thanks for this response on noise and vibration. Was asking myself the same question. Thanks again.
Great article, thanks for sharing…