Hearing Loss Among Construction Workers: Chemicals Can Make It Worse
Posted on by![](https://blogs.cdc.gov/wp-content/uploads/sites/22/2020/10/oto1b-300x267.jpg)
Three out of four construction workers are exposed to hazardous noise levels on the jobsite.[i] Noise levels are considered hazardous when they reach 85 decibels or higher. A NIOSH study examining hearing loss across industries found that construction workers have higher levels of hearing loss than workers in most industries.[ii] The highest rates are experienced by construction workers in nonresidential building construction, highway and bridge construction, and heavy and civil engineering. [iii] With power tools, mobile equipment, and other sources of hazardous noise present at many construction sites, workers have multiple reasons to wear hearing protection devices. Even so, one study found that one out of three construction workers exposed to hazardous noise did not wear hearing protection.[iii]
A lesser known threat to hearing loss that is present at nearly every construction site across the country and that can cause just as much, if not more damage to hearing than loud noises, are chemicals.
Hazardous Chemicals Can Cause Hearing Loss
Hazardous chemicals are not only dangerous to our health from inhalation, ingestion, and skin contact, but they can also cause hearing loss when combined with sound levels that are lower than the NIOSH recommended 85 decibel time weighted average exposure limit for noise.
Many chemicals can enhance the damaging effects of noise when individuals are exposed to both loud sounds and chemicals. This type of hearing loss is known as ototoxicity. Ototoxicity occurs when chemical substances affect the auditory or hearing system. Many workers are unaware that hearing loss has occurred until completing an audiogram and reviewing the results with a physician or other licensed healthcare provider.
Hundreds of ototoxicant chemicals have been identified by NIOSH and others:[iv] [v] [vi]
- Pharmaceuticals (such as aspirin, nonsteroidal anti-inflammatory drugs (NSAIDs), and loop diuretics)
- Solvents (such as toluene, xylene, and styrene, found in thinners, degreasers and many paints)
- Asphyxiants (such as carbon monoxide, hydrogen cyanide, and tobacco smoke)
- Nitriles (such as butenenitrile, cis-2-pentenenitrile, and acrylonitrile)
- Metals and Compounds (such as mercury compounds, organic tin compounds, and lead)
- Pesticides (such as organophosphates, paraquat, pyrethroids, hexachlorobenzene)
Protecting Workers from Chemicals That Can Cause Hearing Loss
To prevent hearing loss, chemicals that have ototoxic characteristics should be identified prior to exposure. Workers and employers should review chemical safety data sheets (SDSs) to identify the various ototoxic chemicals currently used in the workplace. Below is the toxicological section of a sample SDS that shows where a chemical is identified as a potential neurotoxicant (ototoxicants are often called neurotoxicants). If that is the case, check the symptoms associated with exposure to see if they include hearing complaints.
![](https://blogs.cdc.gov/wp-content/uploads/sites/22/2020/10/oto3.png)
In 2019, the American Conference of Governmental Industrial Hygienists (ACGIH) adopted an ototoxicant [OTO] notation to highlight a chemical’s ability to cause hearing loss either alone or in combination with noise.[vii] If ototoxicant chemicals are present, the ACGIH suggests noise exposure reduction using engineering, administrative, and PPE controls. They also suggest placing affected employees in hearing conservation and medical surveillance programs to monitor hearing loss.
Specifically, when workers are exposed to noise and ototoxicants such as carbon monoxide, hydrogen cyanide, lead, and solvent mixtures, ACGIH suggests that employers should conduct periodic audiograms. Audiograms should also be provided in the absence of noise when ethylbenzene, styrene, toluene, or xylene exposures are present in the workplace.
Eliminate or Substitute Ototoxic Chemicals When Possible
Consider the risks associated with ototoxic chemicals and determine if they are vital to the job site and the desired outcomes of the project. By performing a risk-assessment, organizations can evaluate the harmful effects of chemicals on their jobsites, and make an informed decision as to whether or not a safer alternative should be used. In addition, organization’s procurement departments and related personnel should be trained to identify chemicals that are potential ototoxicants so that the hazard can be identified before the hazardous product is purchased.
Can the work process be revised to eliminate the ototoxic chemical or substitute the chemical being used for one that is less hazardous? For example, if an electric portable generator can achieve the same results as a comparable gasoline-powered version, this could be a simple way to reduce your workers’ exposure to carbon monoxide from the generator’s exhaust, as well as the toluene that is found in the gasoline; both of these agents are ototoxicants.[viii] If this is not feasible, consider implementing engineering and/or administrative controls, such as reducing the number of exposed workers or reducing the duration of exposure.
Proper Hearing Conservation Involves All Levels of an Organization
When employers are considering ways to prevent work-related hearing loss, the decision-making process should involve input from all levels of the organization. An organization must have leadership support in order to stop hearing loss within the construction industry, as well as obtaining buy-in from the frontline employees. By engaging with departments at all levels of the organization to achieve a common goal, it not only promotes hazard recognition and employee engagement, but it helps create a stronger hearing loss prevention program.
Preventing exposure to ototoxicant chemicals is an important step in reducing hearing loss in the construction industry. During National Protect Your Hearing Month make it a point to examine the chemical safety data sheets at your construction site to see if ototoxicants are in use.
For more information on risk factors for hearing loss, please visit the NIOSH Noise and Hearing Loss Prevention topic page and the blog Ototoxicant Chemicals and Workplace Hearing Loss.
Drew Hinton, MS, CSP, CHMM, COHC, is a Contractor for the NIOSH Office of Construction Safety and Health.
CDR Elizabeth Garza, MPH, CPH, is Assistant Coordinator for the Construction Sector in the NIOSH Office of Construction Safety and Health.
Jeanette Novakovich, MA, MS, PhD, is Assistant Coordinator for Emergency Preparedness Response Program in the NIOSH Office of Emergency Response Preparedness and Response Office and Writer-Editor in the NIOSH Division of Science Integration.
Scott Earnest, PhD, PE, CSP, is the Associate Director for Construction Safety and Health.
Thais Morata, PhD, is a Research Audiologist in the NIOSH Division of Field Studies and Engineering.
Trudi McCleery, MPH, is a Health Communications Specialist in the NIOSH Division of Science Integration, Science Applications Branch.
References
[i] CPWR (2010). The construction chart book: ONET database and occupational exposures in construction. CPWR-The Center for Construction Research and Training. Silver Spring, MD
[ii] Masterson, E.A., Tak, S., Themann, C.L., Wall, D.K., Groenewold, M.R., Deddens, J.A. and Calvert, G.M. (2013), Prevalence of hearing loss in the United States by industry. Am. J. Ind. Med., 56: 670-681. doi:10.1002/ajim.22082
[iii] Tak, S., R. R. Davis and G. M. Calvert (2009). “Exposure to hazardous workplace noise and use of hearing protection devices among US workers–NHANES, 1999-2004.” Am J Ind Med 52(5): 358-371.
[iv] Nordic Expert Group (2010). 142. Occupational exposure to chemicals and hearing impairment. Johnson AC, Morata TC. The Nordic Expert Group for Criteria Documentation of Health Risks from Chemicals. Nordic Expert Group. Gothenburg. Arbete och Hälsa; 44(4): 177 pp. https://gupea.ub.gu.se/handle/2077/23240
[v] Occupational Safety and Health Administration and National Institute of Occupational Safety and Health (2018). Preventing Hearing Loss Caused by Chemical (Ototoxicity) and Noise Exposure. Retrieved from https://www.cdc.gov/niosh/docs/2018-124/default.html
[vi] NIOSH (1996). Preventing Occupational Hearing Loss – A Practical Guide. Human Health Services, Centers for Disease Control, National Institute of Occupational Safety: Washington DC. DHHS (NIOSH) Publication Number 96-110. https://www.cdc.gov/niosh/docs/96-110/default.html
[vii] American Conference of Governmental Industrial Hygienists [ACGIH]. Threshold limit values and biological exposure indices. Cincinnati, OH: ACGIH 2019.
[viii] Pillion J. P. (2012). Sensorineural Hearing Loss following Carbon Monoxide Poisoning. Case reports in pediatrics, 2012, 231230. https://doi.org/10.1155/2012/231230
4 comments on “Hearing Loss Among Construction Workers: Chemicals Can Make It Worse”
Comments listed below are posted by individuals not associated with CDC, unless otherwise stated. These comments do not represent the official views of CDC, and CDC does not guarantee that any information posted by individuals on this site is correct, and disclaims any liability for any loss or damage resulting from reliance on any such information. Read more about our comment policy ».
The blog focuses solely on the elimination or substitution of ototoxic chemicals. Information should be included on other control measures for management of potential hearing loss risk. Workplaces can reduce exposures to styrene, ethylbenzene, and other ototoxic substances to minimize the potential risk of hearing loss to workers.
Thank you for your comment. Following the hierarchy of controls, if elimination or substitution of a hazard are not possible, reducing exposure though engineering controls is the preferred approach to control exposure to hazards. The blog also notes that “If ototoxicant chemicals are present, the ACGIH® suggests noise exposure reduction using engineering, administrative, and PPE controls.”
Suggest NIOSH develope a webinar on this important subject.
I have read many manufactures data sheets on hearing protection but have not seen precautions relating to OTOToxic. Have NIOSH implemented recommendations to hearing protection manufactures regarding OTOToxic hazards in their data sheets?
Thank you for the question. Ototoxic chemical exposures generally occur through inhalation or skin absorption, so the most effective controls would be to eliminate or reduce the exposure using engineering controls, or secondarily using PPE such as respirators and protective clothing. The ears would not likely be a significant route-of-entry for those chemicals. Additionally, the information required by the Environmental Protection Agency to label hearing protection devices (40 CFR 211 subpart B) only addresses the noise reduction performance of hearing protection devices.
Regarding mixed exposures to noise and ototoxic substances, NIOSH published a document in 2018 jointly with the Occupational Safety and Health Administration, Preventing Hearing Loss Caused by Chemical (Ototoxicity) and Noise Exposure. Ototoxic substances may increase the risk of developing hearing loss through a different mechanism than the metabolic exhaustion or mechanical destruction that are the primary mechanisms of hearing loss with noise exposure. Ototoxic chemicals, in essence, poison the sensory cells – outer and inner hair cells. For some chemotherapeutic drugs, (e.g. cisplatin or carboplatin), the inner and outer hair cells can be damaged. Johnson and Morata (2010) published an extensive report about Occupational exposure to chemicals and hearing impairment.
NIOSH researchers have presented several talks about mixed exposures to noise and ototoxic substances and the risk of developing hearing loss. The wide range of ototoxic chemicals, heavy metals, and pharmaceutical substances makes it difficult to identify the risks for all possible combinations. Persons with mixed exposures should be monitored and precautions taken to prevent the exposures to the chemical.