![The Permanent Multipurpose Module](https://blogs.nasa.gov/spacestation/wp-content/uploads/sites/240/2015/05/iss038e015272_blog.jpg)
The International Space Station’s Permanent Multipurpose Module (PMM) was detached from a berthing mechanism on the Earth-facing port of the Unity module at 5:50 a.m. EDT by robotics flight controllers at Mission Control, Houston, working in tandem with Canadian Space Agency (CSA) engineers at the robotics support center located at CSA Headquarters in St. Hubert, Quebec, Canada. Used as a supply depot for the orbital laboratory, the 11-ton PMM is being maneuvered to an installation position at the forward port of the Tranquility module through the use of the station’s robotic arm, Canadarm2. NASA Television will provide coverage of the final steps of the installation and provide a replay of pertinent video from the start of the operation beginning at 8 a.m. EDT.
Once it is in the proper position, Expedition 43 Commander Terry Virts and Flight Engineer Scott Kelly of NASA will oversee the module’s final attachment to Tranquility. Virts and Kelly will reopen the hatch to the PMM at its new location tomorrow.
This move will clear the Unity port for its use as a second berthing location for U.S. commercial cargo spacecraft; the Earth-facing port on Harmony is currently used as the home port for U.S. cargo craft. The relocation of the PMM is the next step in the reconfiguration of the station that will allow U.S. commercial crew vehicles to dock to new docking ports on the forward and space-facing side of the Harmony module. That will provide a total of four ports for U.S. vehicles arriving at the orbital outpost.
Astronauts will be in my prayer because they are off the Earth for the Earth.