StructureCraft

The longest clear-span timber gridshell of its type in the world. The largest of the Taiyuan Botanical Garden Domes is a non-triangulated gridshell, resulting in our choice to use a light diagrid layer of nearly invisible, but carefully detailed cables and adjustable nodes to mitigate multi-modal snap-through buckling by stabilizing/organizing the buckling modes. A major challenge lay in how to tension the cables, given that they had to connect numerous nodes in a two way pattern. The problem was neatly solved by devising for each node a special casting with separate pieces joined with an adjusting bolt which could essentially “pull” tension into the cable net, by pulling the cables closer to the gridshell above, thereby lengthening the entire cable net. This project used an early iteration of Branch 3D to allow the thousands of complex part and piece drawings to be created rapidly. Delugan Meissl Associated Architects Photos: Light Chaser

Leif Johnson will present our all-wood joint solution for Kansas University's Makers' KUbe at the Advancing Mass Timber Construction conference in Nashville.   Join him on September 23-25 in Music City to hear how we combine modern-day technology with traditional craftsmanship to develop efficient and cost-effective all-wood structural systems.   And while you're there, check out our built projects in Nashville (pictured below) - we've got quite a few: ▶Nashville Warehouse Company Office - 190,000 sqft, 5 storey mass timber offices over 3 buildings ▶1030 Music Row -  Panattoni Development's 120,000 sqft, 5 storey mass timber office with a steel braced core ▶GEODIS Park, Nashville SC Stadium Entrance Canopies - 7 mass timber entrance canopies for the largest soccer stadium in the US ▶T3 Wedgewood-Houston - Hines's 200,000 sqft, 7 storey mass timber office Registration link in the comments. Images: Big Acorn Studios, Andrew Keithly, Tonda McKay #MassTimber #Conference #Nashville #StructuralEngineering #TimberConstruction

“Southern yellow pine is prevalent in this area of the country, so the species can and should be utilized to build mass timber structures," says Leif Johnson, Structural Engineering Director at StructureCraft in our case study detailing the 619 Ponce project in #Atlanta. "We are excited about helping expand the potential with different species. Our hope is that by using southern pine on this building, it acts as a catalyst for the entire southeast region.” The project is also the first to participate in the State of Georgia’s #Sustainable Development Carbon Sequestration Registry, a program that allows developers to earn #carboncredits by utilizing materials like #masstimber in their buildings. Read the 619 Ponce case study here: https://lnkd.in/gDjNRdsD Jamestown | Handel Architects | StructureCraft | DeSimone Consulting Engineering | Seagate Mass Timber Inc. | SmartLam North America™ | Rothoblaas

The Presentation Centre at Fraser Mills pays homage to the legacy of the local old lumber mill, which held a prominent position as the largest mill in the region and played a pivotal role in the growth of Vancouver. Inspired by the site’s rich historical significance, Patkau Architects's visionary design for Beedie's presentation center encapsulates a master plan info hub and two display homes that seamlessly blend the past with the present. It ingeniously incorporates elements symbolizing innovation and growth, where the central themes of craft, wood, and technology converge to reflect both the traditional craftsmanship deeply rooted in the lumber mill’s heritage and the cutting-edge advancements that have shaped the area’s development. “The goal was not merely to construct a building but to create a living testament that seamlessly weaves together the past, present, and future.” says Greg Boothroyd, Principal at Patkau Architects. Our role: Structural engineer of record and timber builder #Coquitlam #StructuralEngineering #MassTimber #TimberConstruction

It’s always great having team members visiting and exchanging experiences between different offices especially when you are part of one big single team. Next week it will be time to welcome our members from Romania and Lithuania. Looking forward to it!!

Imagine a museum with a US Coast Guard helicopter hanging from the ceiling! The Columbia River Maritime Museum in Astoria, Oregon is set to undergo a transformative $30M expansion, nearly doubling its size with a new Mariners Hall. With 24,500 sqft (2300 sqm) of exhibit space, the Hall will showcase a vast collection of maritime artifacts and historic vessels, nearly doubling its size to enhance its role as an educational, research, and tourist destination on the West Coast. Structurally, Mariner’s Hall showcases a curved timber roof that vaults over the exhibition area, providing a visually striking open space that can be seen from the outside through full-height windows. Curved glulam ribs spanning up to 60 ft (18m) are topped with purlin-plywood panels to create an all-wood roof supported by strategically placed timber and steel columns. The new museum emphasizes an innovative and sustainable approach to structural design, nodding to the history of wood structures on the Museum’s campus, in maritime construction, and throughout the Pacific Northwest. Client: Columbia River Maritime Museum Architect: Opsis Architecture Our service: Structural engineer of record Contractor: Rickenbach Construction Renders courtesy of Opsis Architecture. #longspan #museum #pacificnorthwest #structuralengineering #masstimber

Since its inception, the Nancy Pauw Bridge has been an important connection in #Banff, #Alberta. The bridge was assembled using prefabricated sections to minimize environmental disruptions and designed with a shallow arch to blend seamlessly into the landscape. It serves as both a functional piece of infrastructure and a scenic destination. Connecting Central Park with the Banff Recreation Grounds, the bridge supports up to 8,000 crossings a day! It helps alleviate traffic on another nearby bridge and encourages eco-friendly transportation methods. Honouring the legacy of Nancy Pauw—an avid cyclist and dedicated community member—this bridge stands as a model of sustainable infrastructure that enhances community life. Want to learn more about this Government of Canada project?  https://lnkd.in/eYRbCF4n Have you visited the Nancy Pauw Bridge, or do you plan to? What are your thoughts on this blend of nature and engineering? StructureCraft Town of Banff

Join us next week in our CTBUH event: "Timber Structures - How Building in Hybrid Can Reach New Heights." Only few tickets left, book yours in the link below: https://lnkd.in/eCn5rN8H Special thanks again to our event host AECOM and our distinguished panel: Ben Lewis, Design Director, AECOM Lucas Epp, Vice President & Head of Engineering, StructureCraft Darina Zlateva, AIA, AIA, Director, KPF Elias Anka, Associate Principal - Lead Environmental Specialist, KPF Steve Colomb, Development Manager, Dexus Jon Leach, Director, AECOM We look forward to seeing you there!

𝟏𝟎𝟑𝟎 𝐌𝐮𝐬𝐢𝐜 𝐑𝐨𝐰 𝐫𝐞𝐜𝐞𝐢𝐯𝐞𝐬 𝐔𝐋𝐈 𝐍𝐚𝐬𝐡𝐯𝐢𝐥𝐥𝐞’𝐬 𝟐𝟎𝟐𝟒 𝐄𝐱𝐜𝐞𝐥𝐥𝐞𝐧𝐜𝐞 𝐢𝐧 𝐃𝐞𝐯𝐞𝐥𝐨𝐩𝐦𝐞𝐧𝐭 𝐀𝐰𝐚𝐫𝐝! • If you don't know this building or haven’t seen the interiors on this building yet, check out the link below to see a brief walkthrough & description  https://lnkd.in/gAXPHgG8 •The developer chose mass timber because a "building built with totally sustainable construction materials fits nicely with the creative-type tenants in this submarket" • It was such a pleasure working with the awesome team at Anecdote on this one! • Nashville continues to be a hot bed for Mass Timber and I’m looking forward to the next one!🎻 • It has been a few years since we topped this project out, but I still love looking at the finished photos and reminiscing on the design and build processes. • A few throwback photos below from when we put this one together:

Project Case Study: 619 Ponce, Atlanta, GA | 4 stories | Type III-B With 22 million acres of commercial timberland, the state of Georgia has been working to take advantage of the growing demand for mass timber. Recognizing the possibilities, real estate investment and management firm Jamestown blended local wood with innovative design, using mass timber to build a four-story office in Atlanta. 619 Ponce is the first commercial project in Georgia to use mass timber made from southern yellow pine (SYP) timber grown in the state. The project demonstrates the influence that developers and their tenants have in generating demand for mass timber construction, particularly in locations that historically have not had a clear supply and manufacturing chain, and highlights the potential for #masstimber market expansion across the country. Get the case study 👉 https://lnkd.in/gDjNRdsD Owner: Jamestown Architect: Handel Architects Structural Engineer: StructureCraft (Timber structure), DeSimone Consulting Engineering (Concrete) General Contractor: J. E. Dunn Construction Group Mass Timber:  Georgia Pacific (Lumber), SmartLam North America™ (Manufacturer: CLT panels, glulam beams and columns) Connectors: Rothoblaas #Timber #MassTimberConstruction #Atlanta #AtlantaRealEstate #SouthernYellowPine #WoodBuildings #Sustainability #PonceCityMarket