This document explains how to create a virtual machine (VM) instance that is configured to use a user-managed service account. A service account is a special kind of account typically used by an application or compute workload to make authorized API calls.
Service accounts are needed for scenarios where a workload, such as a custom application, needs to access Google Cloud resources or perform actions without end-user involvement. For more information about when to use service accounts, see Best practices for using service accounts.
If you have applications that need to make calls to Google Cloud APIs, Google recommends that you attach a user-managed service account to the VM on which the application or workload is running. Then, you grant the service account IAM roles, which gives the service account–and, by extension, applications running on the VM–access to Google Cloud resources.
Before you begin
-
If you haven't already, set up authentication.
Authentication is
the process by which your identity is verified for access to Google Cloud services and APIs.
To run code or samples from a local development environment, you can authenticate to
Compute Engine as follows.
Select the tab for how you plan to use the samples on this page:
Console
When you use the Google Cloud console to access Google Cloud services and APIs, you don't need to set up authentication.
gcloud
-
Install the Google Cloud CLI, then initialize it by running the following command:
gcloud init
- Set a default region and zone.
Terraform
To use the Terraform samples on this page in a local development environment, install and initialize the gcloud CLI, and then set up Application Default Credentials with your user credentials.
- Install the Google Cloud CLI.
-
To initialize the gcloud CLI, run the following command:
gcloud init
-
Create local authentication credentials for your user account:
gcloud auth application-default login
For more information, see Set up authentication for a local development environment.
REST
To use the REST API samples on this page in a local development environment, you use the credentials you provide to the gcloud CLI.
Install the Google Cloud CLI, then initialize it by running the following command:
gcloud init
For more information, see Authenticate for using REST in the Google Cloud authentication documentation.
-
Required roles
To get the permissions that you need to create VMs that use service accounts, ask your administrator to grant you the following IAM roles on the project:
-
Compute Instance Admin (v1) (
roles/compute.instanceAdmin.v1
) -
Create Service Accounts (
roles/iam.serviceAccountCreator
)
For more information about granting roles, see Manage access.
These predefined roles contain the permissions required to create VMs that use service accounts. To see the exact permissions that are required, expand the Required permissions section:
Required permissions
The following permissions are required to create VMs that use service accounts:
-
To create service accounts:
All the permissions in the
serviceAccountCreator
role -
To create VMs:
compute.instances.create
on the project- To use a custom image to create the VM:
compute.images.useReadOnly
on the image - To use a snapshot to create the VM:
compute.snapshots.useReadOnly
on the snapshot - To use an instance template to create the VM:
compute.instanceTemplates.useReadOnly
on the instance template - To assign a legacy network to the VM:
compute.networks.use
on the project - To specify a static IP address for the VM:
compute.addresses.use
on the project - To assign an external IP address to the VM when using a legacy network:
compute.networks.useExternalIp
on the project - To specify a subnet for the VM:
compute.subnetworks.use
on the project or on the chosen subnet - To assign an external IP address to the VM when using a VPC network:
compute.subnetworks.useExternalIp
on the project or on the chosen subnet - To set VM instance metadata for the VM:
compute.instances.setMetadata
on the project - To set tags for the VM:
compute.instances.setTags
on the VM - To set labels for the VM:
compute.instances.setLabels
on the VM - To set a service account for the VM to use:
compute.instances.setServiceAccount
on the VM - To create a new disk for the VM:
compute.disks.create
on the project - To attach an existing disk in read-only or read-write mode:
compute.disks.use
on the disk - To attach an existing disk in read-only mode:
compute.disks.useReadOnly
on the disk
You might also be able to get these permissions with custom roles or other predefined roles.
Overview
It is recommended that you configure service accounts for your VMs as follows:
- Create a new user-managed service account rather than using the Compute Engine default service account, and grant IAM roles to that service account for only the resources and operations that it needs.
- Attach the service account to your VM.
- Set the cloud platform (
https://www.googleapis.com/auth/cloud-platform
) scope on your VM. This allows the VM's service account to call the Google Cloud APIs that it has permission to use.- If you specify the service account by using the Google Cloud console,
the VM's access scope automatically defaults to the
cloud-platform
scope. - If you specify the service account by using the Google Cloud CLI or Compute Engine
API, you can use the
scopes
parameter to set the access scope.
- If you specify the service account by using the Google Cloud console,
the VM's access scope automatically defaults to the
Set up a service account
Create a service account and assign the required IAM roles. Assign as many or as little IAM roles as needed. You can modify the IAM roles on your service account as needed.
Google recommends that you limit the privileges of service accounts and regularly check your service account permissions to make sure they are up-to-date.
Use one of the following methods to set up the service account.
Console
- Select your project.
-
In the Service account name field, enter a name. The Google Cloud console fills in the Service account ID field based on this name.
In the Service account description field, enter a description. For example,
Service account for quickstart
. - Click Create and continue.
-
Grant the required roles to the service account.
To grant a role, find the Select a role list, then select the role.
To grant additional roles, click
Add another role and add each additional role. - Click Continue.
-
In the Service account users role field, enter the identifier for the principal that will attach the service account to other resources, such as Compute Engine instances.
This is typically the email address for a Google Account.
-
Click Done to finish creating the service account.
In the Google Cloud console, go to the Create service account page.
Go to Create service accountgcloud
-
Create the service account:
gcloud iam service-accounts create SERVICE_ACCOUNT_NAME
Replace
SERVICE_ACCOUNT_NAME
with a name for the service account. -
To provide access to your project and your resources, grant a role to the service account:
gcloud projects add-iam-policy-binding PROJECT_ID --member="serviceAccount:SERVICE_ACCOUNT_NAME@PROJECT_ID.iam.gserviceaccount.com" --role=ROLE
Replace the following:
SERVICE_ACCOUNT_NAME
: the name of the service accountPROJECT_ID
: the project ID where you created the service accountROLE
: the role to grant
- To grant another role to the service account, run the command as you did in the previous step.
-
Grant the required role to the principal that will attach the service account to other resources.
gcloud iam service-accounts add-iam-policy-binding SERVICE_ACCOUNT_NAME@PROJECT_ID.iam.gserviceaccount.com --member="user:USER_EMAIL" --role=roles/iam.serviceAccountUser
Replace the following:
SERVICE_ACCOUNT_NAME
: the name of the service accountPROJECT_ID
: the project ID where you created the service accountUSER_EMAIL
: the email address for a Google Account
Set up authentication:
Terraform
To create a service account, you can use the google_service_account
resource.
Remember to replace the placeholder values for the account_id
and the
display_name
attributes.
To learn how to apply or remove a Terraform configuration, see Basic Terraform commands.
Create a VM and attach the service account
After you create the service account, create a VM and attach the service account
that you created in the previous section. Also set the VM's access scope to
cloud-platform
.
If you already have an existing VM and you want to configure that VM to use a different service account, see Change the attached service account.
Use one of the following methods to create a VM and attach the service account.
Console
- In the Google Cloud console, go to the VM instances page.
- Select your project and click Continue.
- Click Create instance.
- Specify a Name for your VM.
- Go to the Identity and API access section.
- In the Service account list, select the service account that you
created. When you attach a service account to a VM, the Google Cloud
access scope
cloud-platform
access scope is automatically set on the VM. - Make additional VM customizations, as needed.
- To create and start the VM, click Create.
gcloud
To create a new VM instance and configure it to use a custom service account
by using the Google Cloud CLI, use the gcloud compute instances create
command and provide the
service account email and the cloud-platform
access scope to the VM
instance.
gcloud compute instances create VM_NAME \ --service-account=SERVICE_ACCOUNT_EMAIL \ --scopes=https://www.googleapis.com/auth/cloud-platform
Replace the following:
SERVICE_ACCOUNT_EMAIL
: the email address for the service account that you created. For example:[email protected]
. To view the email address, see Listing service accounts.VM_NAME
: the name of the VM instance.
For example:
gcloud compute instances create example-vm \ --service-account [email protected] \ --scopes=https://www.googleapis.com/auth/cloud-platform
You can also specify the scope using the alias: --scopes=cloud-platform
.
These aliases are recognized only by the gcloud CLI. The API
and other libraries don't recognize these aliases, so you must specify the
full scope URI.
Terraform
To set up a new VM to use a service account, you can use the
google_compute_instance
resource.
REST
Use the instances.insert
method to create the VM
and specify the service account email and access scope for the VM instance.
POST https://compute.googleapis.com/compute/v1/projects/PROJECT_ID
/zones/ZONE
/instances { "machineType":"zones/MACHINE_TYPE_ZONE/machineTypes/MACHINE_TYPE", "name":"VM_NAME
", "disks":[ { "initializeParams":{ "sourceImage":"projects/IMAGE_PROJECT/global/images/IMAGE" }, "boot":true } ], "networkInterfaces":[ { "network":"global/networks/NETWORK_NAME" } ], "serviceAccounts": [ { "email": "SERVICE_ACCOUNT_EMAIL", "scopes": ["https://www.googleapis.com/auth/cloud-platform"] } ], "shieldedInstanceConfig":{ "enableSecureBoot":"ENABLE_SECURE_BOOT" } }
Replace the following:
PROJECT_ID
: ID of the project to create the VM inZONE
: zone to create the VM inMACHINE_TYPE_ZONE
: zone containing the machine type to use for the new VMMACHINE_TYPE
: machine type, predefined or custom, for the new VMVM_NAME
: name of the new VMIMAGE_PROJECT
: project containing the image
For example, if you specifydebian-10
as the image family, specifydebian-cloud
as the image project.IMAGE or IMAGE_FAMILY
: specify one of the following:IMAGE
: a specific version of a public image
For example,"sourceImage": "projects/debian-cloud/global/images/debian-10-buster-v20200309"
IMAGE_FAMILY
: an image family
This creates the VM from the most recent, non-deprecated OS image. For example, if you specify"sourceImage": "projects/debian-cloud/global/images/family/debian-10"
, Compute Engine creates a VM from the latest version of the OS image in theDebian 10
image family.
NETWORK_NAME
: the VPC network that you want to use for the VM. You can specifydefault
to use your default network.SERVICE_ACCOUNT_EMAIL
: the email address for the service account that you created. For example:[email protected]
. To view the email address, see obtain a service account email.ENABLE_SECURE_BOOT
: Optional: If you chose an image that supports Shielded VM features, Compute Engine, by default, enables the virtual trusted platform module (vTPM) and integrity monitoring. Compute Engine does not enable Secure Boot by default.If you specify
true
forenableSecureBoot
, Compute Engine creates a VM with all three Shielded VM features enabled. After Compute Engine starts your VM, to modify Shielded VM options, you must stop the VM.
Access and use other Google Cloud services
After your VM is configured to use the service account, applications can then use the service account to authenticate. The most common method is to authenticate by using Application Default Credentials and a client library. Some Google Cloud tools such as the gcloud CLI are able to automatically use the service account to access Google Cloud APIs from a VM. For more information, see Authenticate workloads using service accounts.
If a service account is deleted, applications will no longer have access to Google Cloud resources through that service account. If you delete the default App Engine and Compute Engine service accounts, your VMs will no longer have access to resources in the project. If you're not sure whether a service account is being used, Google recommends disabling the service account before deleting it. Disabled service accounts can be re-enabled if they are still needed.
Example: Access Cloud Storage resources from your VM
After you have configured your VM to use a service account that has the
storage.admin
role, you can use tools such as the gcloud CLI
to manage files that you have stored on Cloud Storage. To access your
Cloud Storage resources, complete the following:
Ensure that the service account that is attached to your VM has the
roles/storage.admin
role.If your VM uses a custom OS image, install the gcloud CLI. By default, the gcloud CLI is installed on most public OS images that are provided by Google Cloud.
Connect to the VM.
From the VM, use the Google Cloud CLI to manage your Cloud Storage resources.
What's next?
- Learn how to authenticate workloads using service accounts.
- Learn how to change the service account attached to a VM.
- Learn how to list and edit service accounts.
- Review the best practices for working with service accounts and mitigate security risks.