Normenabgleich 2Q-2011 Änderungen
Normenabgleich 2Q-2011 Änderungen
Entwicklung Supersedes DIN EN 50014. (12/2004) Supersedes DIN EN 61241-0 and DIN IEC 60079-0. DIN
EN 60079-0 issue 05-2007 and DIN EN 61241-0 issue 07-2007 remain valid alongside this
standard until 01-06-2012. (03/2010)
Deutsche Ersetzt DIN EN 50014. (12/2004) Ersetzt DIN EN 61241-0 und DIN IEC 60079-0. DIN EN
Entwicklung (CÜ) 60079-0 Angelegenheit 05-2007 und DIN EN 61241-0 geben 07-2007 aus bleiben Sie bis zu 01-
06-2012. (03/2010 neben diesem Standard gültig )
Ersatzl. Nein
zurückgez.
Ersetzt Nein
Zusammenf.
Dieser Teil von IEC 60079 legt die allgemeinen Anforderungen an die Konstruktion, Prüfung und
Kennzeichnung von elektrischen Geräten und Ex-Bauteilen fest, die für die Verwendung in
explosionsgefährdeten Bereichen bestimmt sind.
Sprache DEUTSCH
Inhaltsverzeichnis FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Apparatus grouping and temperature classification
4.1 Apparatus grouping
4.2 Group II
5 Temperatures
5.1 Environmental influences
5.2 Service temperature
5.3 Maximum surface temperature
5.4 Surface temperature and ignition temperature
5.5 Small components
6 Requirements for all electrical apparatus
6.1 General
6.2 Mechanical strength of apparatus
6.3 Opening times
6.4 Circulating currents
http://normen.bie.de.duerr.int/cgi-bin/main.exe?tp=summary&sid=18600247&upid=1... 29.06.2011
ILI WebApp Page 2 of 3
http://normen.bie.de.duerr.int/cgi-bin/main.exe?tp=summary&sid=18600247&upid=1... 29.06.2011
ILI WebApp Page 3 of 3
26.1 General
26.2 Test configuration
26.3 Tests in explosive test mixtures
26.4 Tests of enclosures
26.5 Thermal tests
26.6 Torque test for bushings
26.7 Non-metallic enclosures or non-metallic parts of
enclosures
26.8 Thermal endurance to heat
26.9 Thermal endurance to cold
26.10 Resistance to light
26.11 Resistance to chemical agents for Group I electrical
apparatus
26.12 Earth continuity
26.13 Surface resistance test of parts of enclosures of
non-metallic materials
26.14 Charging tests
26.15 Measurement of capacitance
27 Routine verifications and tests
28 Manufacturer's responsibility
28.1 Certificate
28.2 Responsibility for marking
29 Marking
29.1 Location
29.2 General
29.3 Different types of protection
29.4 Order of marking
29.5 Ex components
29.6 Small apparatus and Ex components
29.7 Extremely small apparatus and Ex components
29.8 Warning markings
29.9 Cells and batteries
29.10 Examples of marking
30 Instructions
30.1 General
30.2 Cells and batteries
Annex A (normative) Ex cable glands
Annex B (normative) Requirements for Ex components
Annex C (informative) Example of rig for resistance to impact
test
Bibliography
Seiten 113
Preis £183.87
DIN
Unique ID 852973
© ILI 2011
http://normen.bie.de.duerr.int/cgi-bin/main.exe?tp=summary&sid=18600247&upid=1... 29.06.2011