Englisch Steilhangprofi 122021
Englisch Steilhangprofi 122021
Englisch Steilhangprofi 122021
We are KONRAD
An insight into
our production
HIGHLANDER
According to our motto - one step further - we try to be one step further.
With new ideas and products, we want to support you in responding to new
requirements and thus being one step ahead. In this issue you will find some
new products - one of them is shown on the front page. The tilt- and turn-
able loadspace as another interchangeable accessory makes the Highlan-
der even more universal and, in combination with the traction winch, a new
interesting harvesting solution on the steep slope.
In Preitenegg, too, we are facing the challenges of the future. This year, we
were able to complete a further structural expansion of our production and
logistics. With this further step of digitization and automation in our logistics
area, we are not only expanding our internal material flow, but above all im-
proving the supply of spare parts for our customers - for maximum availabi-
lity and fast response time.
We have also significantly expanded our production. In doing so, we have not
only expanded our capacity, but also want to continue increasing our quality
through our new assembly stations and better possibilities. In addition, we
have also provided the space for new ideas - because also in 2022, so much I
can already reveal, we will introduce you to new innovations and products.
Markus Konrad
CEO
EDITORIAL
KONRAD Forsttechnik GmbH
Oberpreitenegg 52
9451 Preitenegg
Österreich
[email protected]
+43 4354 / 2432
www.forsttechnik.at
FOTOS
Rene Knabl
R View Productions
Digitalraum TCC
KONRAD Forsttechnik GmbH
November 2021
QUALITY FROM A SINGLE SOURCE
From development to mechanical pro-
duction, electronic hardware and even
software development - we are your
competent partner in all areas.
We KON
a re K
DID YOU KNOW?
Maximum availability and high flexibi-
lity is our claim! In order to be able to
supply our customers with spare parts
as quickly as possible, we store more
than 14.800 different articles in our
spare parts logistics - from the smal-
lest screw to the largest diesel engine!
The first WOODY was developed more
than 30 years ago. Since then, we have
been constantly working on its further
development and improvement!
30 YEARS OF EXPERIENCE AND COMPETENCE
NRAD
rad !
Ko n
CUSTOMER DAY
Short facts: The in-house software makes it possible, among
other things, that operating states, production
■ Venue: KONRAD premises data and the location of the machine can be retrie-
ved at any time.
■ •Machine demonstrations: KDH with WOODY
WH40-2 and HIGHLANDER with load space Afterwards we were allowed to present our ex-
■ WOODY Workshop: Correct Calibration and cavator harvester KDH and the HIGHLANDER,
with the newly developed loead space, under real
Adjustment of Harvester Units
conditions, while working in the forest.
■ Product presentation: KONRAD CLOUD
Our tracked thinning harvester KDH worked with
the WOODY WH40-2 with built-in endless rotator.
With pleasant temperatures and sunshine, we This combination is particularly suitable for work
were able to welcome more than 400 people on in young stands.
our premises on October 1st. In compliance with
the Corona measures, the participants expected In order to be able to use the HIGHLANDER even
a variety of exciting program items. Among ot- more versatile in the future, we extended it by a
her things, there was the opportunity to learn the load space. This not only brings a high loading
correct calibration and adjustment of the harvester capacity, but further increases the productivity.
unit at our WOODY workshop.
With a homemade meal and drinks, the day came
There was also a lively exchange of information to a cozy end. We would like to thank all partici-
at the product presentation of the KONRAD Cloud. pants once again!
Martin Laireiter
Forstbetrieb Laireiter GmbH
AUSTRIA ITALY
KONRAD Forsttechnik GmbH Thaler Karl - Forestal Service
Willi GmbH Vallauri Silvio Gioani
GM - Tech Darocca Service
Fischbacher Holz GmbH & Co KG
Holzlechner Tobias
Wanker Hydraulik GmbH
FRANCE
GERMANY SARL SITKA
Lanz Baumaschinen GmbH S.A.R.L. ETS Chambom
Forsttechnik - MV
MHD Forsttechnik
Willi GmbH
GM - Tech SLOVENIA
Wahlers Forsttechnik Ilmenau GmbH Phejton d.o.o.
SWITZERLAND CROATIA
Herzog Forsttechnik AG SUMA GM d.o.o.
von Atzigen AG
POLAND
SPAIN Kompania Leśna
PORTUGAL BULGARIA
STET Florestal Megatron EAD
S E R V I C E - A N D D I S T R I B U T I O N PA RT N E R
KDH with
WOODY 40
The Konrad Thinning harvester (KDH) with the WOODY 40
is the answer to the question: Are first thinnings econo-
mical? With the Crawler Harvester KDH from Konrad, they
definitely are!
The KDH is based on the ET90 crawler excavator chain drive, a hydraulic return winch, the Power
with 75 hp. Due to the built-in tilt device of the up- Boost hydraulic accumulator or an additional rear
percarriage unit, the excavator can be tilted up to weight round off the KDH‘s range. The acquisition
a maximum of 22°. This creates an optimal slope and operating costs remain low even with this diver-
compensation in rough terrain. se offer.
The optimized main arm for improved kinematics, Due to the low weight, of about 10 tons, and its com-
as well as the telescopic extension with internal ho- pact design, even the transfer of the machine is un-
ses, allow an increase in the range to 9.3 meters. complicated.
Other useful options such as climbing aids on the More information: www.forsttechnik.at/kdh
WOODY WH40-2
MAXIMUM DELIMBING
OPENING DIAMETER
75 cm 4-40 cm
FEEDING
FORCE WEIGHT
18 kN 570 kg
WOODY WH50-1
MAXIMUM DELIMBING
OPENING DIAMETER
103 cm 4-55 cm
FEEDING
FORCE WEIGHT
32 kN 1160 kg
WOODY WH60-1
MAXIMUM DELIMBING
OPENING DIAMETER
120 cm 4-65 cm
FEEDING
FORCE WEIGHT
35 kN 1450 kg
WOODY WH70-1
MAXIMUM DELIMBING
OPENING DIAMETER
126 cm 9-75 cm
FEEDING
FORCE WEIGHT
37 kN 1710 kg
K O N R A D F O R S T T E C H N I K G M B H
INDIVIDUAL
SOLUTIONS
TELESCOPIC ARM
Strong telescopic arm
in different versions
LEG SUPPORT
For tracked excavators
from 8 to 25 tons
APPLICATIONS
KONRAD
HIGHLANDER
EXTREMELY VERSATILE
The unique off-road capability distinguishes the HIGH- ■ Enormous off-road capability due to synchro-
LANDER. The machine is particularly flexible and can
nous walking - driving movement
be upgraded in a few minutes from a normal harves-
ter to a combination machine, with a clambank or ■ Integrated traction winch for driving
load space. assistance
■ Safe and well arranged cab with a clear view
The strong winch can be used both as a traction and
to the harvester head
as a logging winch. The endlessly rotatable crane cab
unit gives the operator good all-round visibility and an ■ Maximum manoeuvrability thanks to special
unrestricted working range (360°). steering system
www.forsttechnik.at/hl_en
HIGHLANDER BASIC HB10-1
The HB10-1 is an economical alterna-
tive. It combines the functionality of a
skidder, excavator processor and a har-
vester in simple terrain.
CLAM BANK
The clamping bank is mounted by me-
ans of a quick-change system and is
particularly suitable for the skidding of
full trees.
TRACTION WINCH
The traction winch with rope bumper
integrated in the front end enables
safe working in the most difficult ter-
rain. An additional auxiliary winch is
also available for pulling up the trac-
tion rope. This makes work much ea-
sier.
LOAD SPACE
By using the tilt-and turnable load
space, several work steps can be car-
ried out with just one machine.
K O N R A D F O R S T T E C H N I K G M B H
CABLE TECHNOLOGY
As the market leader in the field of rope tech-
nology, we stand for complete solutions. Qua-
lity from a single source - from development
to the finished product including radio control
manufactured by the company KONRAD.
GEBRAUCHTMASCHINEN
Used machines
DESCRIPTION
incl. top saw
Operating hours: 750
Year of construction: 2020
CONTACT
KONRAD Forsttechnik
[email protected]
GEBRAUCHTMASCHINEN
MOUNTY MT30
DESCRIPTION
equipped with WOODY W52
Operating hours: 19,000
Year of construction: 2011
CONTACT
KONRAD Forsttechnik
[email protected]
VORFÜHRMASCHINE - BAGGERPROZESSOR
DOOSAN DX210w-7
DESCRIPTION
Year of construction: 2021
with WOODY WH60-1
Logging winch RW90-1
KONRAD Jib boom extension
CONTACT
KONRAD Forsttechnik
[email protected]
FANSHOP
T-Shirt
with application on the back € 12 Gilet
in black € 35
Cap
available in black or grey €8
Hat
available in black € 10
Hose scarf
in grey with logo €4
Seat cover
for HIGHLANDER & MOUNTY ab € 79
Order at:
[email protected]
KONRAD
D I G I TA L I S AT I O N
KONRAD
NEW PRODUCTS
CLOUD
Retrieve machine data anytime,
anywhere.
NEW DESIGN
available 2022