The property animation system is a robust framework that allows you to animate almost anything. You can define an animation to change any object property over time, regardless of whether it draws to the screen or not. A property animation changes a property's (a field in an object) value over a specified length of time. To animate something, you specify the object property that you want to animate, such as an object's position on the screen, how long you want to animate it for, and what values you want to animate between.
The property animation system lets you define the following characteristics of an animation:
- Duration: You can specify the duration of an animation. The default length is 300 ms.
- Time interpolation: You can specify how the values for the property are calculated as a function of the animation's current elapsed time.
- Repeat count and behavior: You can specify whether or not to have an animation repeat when it reaches the end of a duration and how many times to repeat the animation. You can also specify whether you want the animation to play back in reverse. Setting it to reverse plays the animation forwards then backwards repeatedly, until the number of repeats is reached.
- Animator sets: You can group animations into logical sets that play together or sequentially or after specified delays.
- Frame refresh delay: You can specify how often to refresh frames of your animation. The default is set to refresh every 10 ms, but the speed in which your application can refresh frames is ultimately dependent on how busy the system is overall and how fast the system can service the underlying timer.
To see a full example of property animation, see the
ChangeColor
class in the CustomTransition
sample on GitHub.
How property animation works
First, let's go over how an animation works with a simple example. Figure 1 depicts a
hypothetical object that is animated with its x
property, which represents its
horizontal location on a screen. The duration of the animation is set to 40 ms and the distance
to travel is 40 pixels. Every 10 ms, which is the default frame refresh rate, the object moves
horizontally by 10 pixels. At the end of 40ms, the animation stops, and the object ends at
horizontal position 40. This is an example of an animation with linear interpolation, meaning the
object moves at a constant speed.
![](/https/developer.android.com/static/images/animation/animation-linear.png)
Figure 1. Example of a linear animation
You can also specify animations to have a non-linear interpolation. Figure 2 illustrates a hypothetical object that accelerates at the beginning of the animation, and decelerates at the end of the animation. The object still moves 40 pixels in 40 ms, but non-linearly. In the beginning, this animation accelerates up to the halfway point then decelerates from the halfway point until the end of the animation. As Figure 2 shows, the distance traveled at the beginning and end of the animation is less than in the middle.
![](/https/developer.android.com/static/images/animation/animation-nonlinear.png)
Figure 2. Example of a non-linear animation
Let's take a detailed look at how the important components of the property animation system would calculate animations like the ones illustrated above. Figure 3 depicts how the main classes work with one another.
![](/https/developer.android.com/static/images/animation/valueanimator.png)
Figure 3. How animations are calculated
The ValueAnimator
object keeps track of your animation's timing,
such as how long the animation has been running, and the current value of the property that it is
animating.
The ValueAnimator
encapsulates a TimeInterpolator
, which defines animation interpolation, and a TypeEvaluator
, which defines how to calculate values for the property being
animated. For example, in Figure 2, the TimeInterpolator
used would be
AccelerateDecelerateInterpolator
and the TypeEvaluator
would be IntEvaluator
.
To start an animation, create a ValueAnimator
and give it the
starting and ending values for the property that you want to animate, along with the duration of
the animation. When you call start()
the animation
begins. During the whole animation, the ValueAnimator
calculates an elapsed fraction
between 0 and 1, based on the duration of the animation and how much time has elapsed. The
elapsed fraction represents the percentage of time that the animation has completed, 0 meaning 0%
and 1 meaning 100%. For example, in Figure 1, the elapsed fraction at t = 10 ms would be .25
because the total duration is t = 40 ms.
When the ValueAnimator
is done calculating an elapsed fraction, it
calls the TimeInterpolator
that is currently set, to calculate an
interpolated fraction. An interpolated fraction maps the elapsed fraction to a new
fraction that takes into account the time interpolation that is set. For example, in Figure 2,
because the animation slowly accelerates, the interpolated fraction, about .15, is less than the
elapsed fraction, .25, at t = 10 ms. In Figure 1, the interpolated fraction is always the same as
the elapsed fraction.
When the interpolated fraction is calculated, ValueAnimator
calls
the appropriate TypeEvaluator
, to calculate the value of the
property that you are animating, based on the interpolated fraction, the starting value, and the
ending value of the animation. For example, in Figure 2, the interpolated fraction was .15 at t =
10 ms, so the value for the property at that time would be .15 × (40 - 0), or 6.
How property animation differs from view animation
The view animation system provides the capability to only animate View
objects, so if you wanted to animate non-View
objects, you have to implement
your own code to do so. The view animation system is also constrained in the fact that it only
exposes a few aspects of a View
object to animate, such as the scaling and
rotation of a View but not the background color, for instance.
Another disadvantage of the view animation system is that it only modified where the View was drawn, and not the actual View itself. For instance, if you animated a button to move across the screen, the button draws correctly, but the actual location where you can click the button does not change, so you have to implement your own logic to handle this.
With the property animation system, these constraints are completely removed, and you can animate any property of any object (Views and non-Views) and the object itself is actually modified. The property animation system is also more robust in the way it carries out animation. At a high level, you assign animators to the properties that you want to animate, such as color, position, or size and can define aspects of the animation such as interpolation and synchronization of multiple animators.
The view animation system, however, takes less time to setup and requires less code to write. If view animation accomplishes everything that you need to do, or if your existing code already works the way you want, there is no need to use the property animation system. It also might make sense to use both animation systems for different situations if the use case arises.
API overview
You can find most of the property animation system's APIs in android.animation
. Because the view animation system already
defines many interpolators in android.view.animation
, you can use
those interpolators in the property animation system as well. The following tables describe the main
components of the property animation system.
The Animator
class provides the basic structure for creating
animations. You normally do not use this class directly as it only provides minimal
functionality that must be extended to fully support animating values. The following
subclasses extend Animator
:
Table 1. Animators
Class | Description |
---|---|
ValueAnimator |
The main timing engine for property animation that also computes the values for the
property to be animated. It has all of the core functionality that calculates animation
values and contains the timing details of each animation, information about whether an
animation repeats, listeners that receive update events, and the ability to set custom
types to evaluate. There are two pieces to animating properties: calculating the animated
values and setting those values on the object and property that is being animated. ValueAnimator does not carry out the second piece, so you must listen
for updates to values calculated by the ValueAnimator and
modify the objects that you want to animate with your own logic. See the section about
Animating with ValueAnimator for more information. |
ObjectAnimator |
A subclass of ValueAnimator that allows you to set a target
object and object property to animate. This class updates the property accordingly when
it computes a new value for the animation. You want to use
ObjectAnimator most of the time,
because it makes the process of animating values on target objects much easier. However,
you sometimes want to use ValueAnimator directly because ObjectAnimator has a few more restrictions, such as requiring specific
accessor methods to be present on the target object. |
AnimatorSet |
Provides a mechanism to group animations together so that they run in relation to one another. You can set animations to play together, sequentially, or after a specified delay. See the section about Choreographing multiple animations with Animator Sets for more information. |
Evaluators tell the property animation system how to calculate values for a given
property. They take the timing data that is provided by an Animator
class, the animation's start and end value, and calculate the animated values of the property
based on this data. The property animation system provides the following evaluators:
Table 2. Evaluators
Class/Interface | Description |
---|---|
IntEvaluator |
The default evaluator to calculate values for int properties. |
FloatEvaluator |
The default evaluator to calculate values for float properties. |
ArgbEvaluator |
The default evaluator to calculate values for color properties that are represented as hexadecimal values. |
TypeEvaluator |
An interface that allows you to create your own evaluator. If you are animating an
object property that is not an int , float , or color,
you must implement the TypeEvaluator interface to specify how
to compute the object property's animated values. You can also specify a custom TypeEvaluator for int , float , and color
values as well, if you want to process those types differently than the default behavior.
See the section about Using a TypeEvaluator for more
information on how to write a custom evaluator. |
A time interpolator defines how specific values in an animation are calculated as a
function of time. For example, you can specify animations to happen linearly across the whole
animation, meaning the animation moves evenly the entire time, or you can specify animations
to use non-linear time, for example, accelerating at the beginning and decelerating at the
end of the animation. Table 3 describes the interpolators that are contained in android.view.animation
. If none of the provided interpolators suits
your needs, implement the TimeInterpolator
interface and create your own. See Using interpolators for more information on how to write a custom
interpolator.
Table 3. Interpolators
Class/Interface | Description |
---|---|
AccelerateDecelerateInterpolator |
An interpolator whose rate of change starts and ends slowly but accelerates through the middle. |
AccelerateInterpolator |
An interpolator whose rate of change starts out slowly and then accelerates. |
AnticipateInterpolator |
An interpolator whose change starts backward then flings forward. |
AnticipateOvershootInterpolator |
An interpolator whose change starts backward, flings forward and overshoots the target value, then finally goes back to the final value. |
BounceInterpolator |
An interpolator whose change bounces at the end. |
CycleInterpolator |
An interpolator whose animation repeats for a specified number of cycles. |
DecelerateInterpolator |
An interpolator whose rate of change starts out quickly and then decelerates. |
LinearInterpolator |
An interpolator whose rate of change is constant. |
OvershootInterpolator |
An interpolator whose change flings forward and overshoots the last value then comes back. |
TimeInterpolator |
An interface that allows you to implement your own interpolator. |
Animate using ValueAnimator
The ValueAnimator
class lets you animate values of some type for the
duration of an animation by specifying a set of int
, float
, or color
values to animate through. You obtain a ValueAnimator
by calling one of
its factory methods: ofInt()
, ofFloat()
, or ofObject()
. For example:
Kotlin
ValueAnimator.ofFloat(0f, 100f).apply { duration = 1000 start() }
Java
ValueAnimator animation = ValueAnimator.ofFloat(0f, 100f); animation.setDuration(1000); animation.start();
In this code, the ValueAnimator
starts calculating the values of the
animation, between 0 and 100, for a duration of 1000 ms, when the start()
method runs.
You can also specify a custom type to animate by doing the following:
Kotlin
ValueAnimator.ofObject(MyTypeEvaluator(), startPropertyValue, endPropertyValue).apply { duration = 1000 start() }
Java
ValueAnimator animation = ValueAnimator.ofObject(new MyTypeEvaluator(), startPropertyValue, endPropertyValue); animation.setDuration(1000); animation.start();
In this code, the ValueAnimator
starts calculating the values of the
animation, between startPropertyValue
and endPropertyValue
using the
logic supplied by MyTypeEvaluator
for a duration of 1000 ms, when the start()
method runs.
You can use the values of the animation by adding an
AnimatorUpdateListener
to the ValueAnimator
object, as shown in the
following code:
Kotlin
ValueAnimator.ofObject(...).apply { ... addUpdateListener { updatedAnimation -> // You can use the animated value in a property that uses the // same type as the animation. In this case, you can use the // float value in the translationX property. textView.translationX = updatedAnimation.animatedValue as Float } ... }
Java
animation.addUpdateListener(new ValueAnimator.AnimatorUpdateListener() { @Override public void onAnimationUpdate(ValueAnimator updatedAnimation) { // You can use the animated value in a property that uses the // same type as the animation. In this case, you can use the // float value in the translationX property. float animatedValue = (float)updatedAnimation.getAnimatedValue(); textView.setTranslationX(animatedValue); } });
In the onAnimationUpdate()
method you can access the updated animation value and use it in a property of
one of your views. For more information on listeners, see the section about
Animation listeners.
Animate using ObjectAnimator
The ObjectAnimator
is a subclass of the ValueAnimator
(discussed in the previous section) and combines the timing
engine and value computation of ValueAnimator
with the ability to
animate a named property of a target object. This makes animating any object much easier, as you
no longer need to implement the ValueAnimator.AnimatorUpdateListener
,
because the animated property updates automatically.
Instantiating an ObjectAnimator
is similar to a ValueAnimator
, but you also specify the object and the name of that object's property (as
a String) along with the values to animate between:
Kotlin
ObjectAnimator.ofFloat(textView, "translationX", 100f).apply { duration = 1000 start() }
Java
ObjectAnimator animation = ObjectAnimator.ofFloat(textView, "translationX", 100f); animation.setDuration(1000); animation.start();
To have the ObjectAnimator
update properties
correctly, you must do the following:
- The object property that you are animating must have a setter function (in camel case) in the form of
set<PropertyName>()
. Because theObjectAnimator
automatically updates the property during animation, it must be able to access the property with this setter method. For example, if the property name isfoo
, you need to have asetFoo()
method. If this setter method does not exist, you have three options:- Add the setter method to the class if you have the rights to do so.
- Use a wrapper class that you have rights to change and have that wrapper receive the value with a valid setter method and forward it to the original object.
- Use
ValueAnimator
instead.
- If you specify only one value for the
values...
parameter in one of theObjectAnimator
factory methods, it is assumed to be the ending value of the animation. Therefore, the object property that you are animating must have a getter function that is used to obtain the starting value of the animation. The getter function must be in the form ofget<PropertyName>()
. For example, if the property name isfoo
, you need to have agetFoo()
method. - The getter (if needed) and setter methods of the property that you are animating must
operate on the same type as the starting and ending values that you specify to
ObjectAnimator
. For example, you must havetargetObject.setPropName(float)
andtargetObject.getPropName()
if you construct the followingObjectAnimator
:ObjectAnimator.ofFloat(targetObject, "propName", 1f)
- Depending on what property or object you are animating, you might need to call the
invalidate()
method on a View to force the screen to redraw itself with the updated animated values. You do this in theonAnimationUpdate()
callback. For example, animating the color property of a Drawable object only causes updates to the screen when that object redraws itself. All of the property setters on View, such assetAlpha()
andsetTranslationX()
invalidate the View properly, so you do not need to invalidate the View when calling these methods with new values. For more information on listeners, see the section about Animation listeners.
Choreograph multiple animations using an AnimatorSet
In many cases, you want to play an animation that depends on when another animation starts or
finishes. The Android system lets you bundle animations together into an AnimatorSet
, so that you can specify whether to start animations
simultaneously, sequentially, or after a specified delay. You can also nest AnimatorSet
objects within each other.
The following code snippet plays the following Animator
objects in the following manner:
- Plays
bounceAnim
. - Plays
squashAnim1
,squashAnim2
,stretchAnim1
, andstretchAnim2
at the same time. - Plays
bounceBackAnim
. - Plays
fadeAnim
.
Kotlin
val bouncer = AnimatorSet().apply { play(bounceAnim).before(squashAnim1) play(squashAnim1).with(squashAnim2) play(squashAnim1).with(stretchAnim1) play(squashAnim1).with(stretchAnim2) play(bounceBackAnim).after(stretchAnim2) } val fadeAnim = ObjectAnimator.ofFloat(newBall, "alpha", 1f, 0f).apply { duration = 250 } AnimatorSet().apply { play(bouncer).before(fadeAnim) start() }
Java
AnimatorSet bouncer = new AnimatorSet(); bouncer.play(bounceAnim).before(squashAnim1); bouncer.play(squashAnim1).with(squashAnim2); bouncer.play(squashAnim1).with(stretchAnim1); bouncer.play(squashAnim1).with(stretchAnim2); bouncer.play(bounceBackAnim).after(stretchAnim2); ValueAnimator fadeAnim = ObjectAnimator.ofFloat(newBall, "alpha", 1f, 0f); fadeAnim.setDuration(250); AnimatorSet animatorSet = new AnimatorSet(); animatorSet.play(bouncer).before(fadeAnim); animatorSet.start();
Animation listeners
You can listen for important events during an animation's duration with the listeners described below.
Animator.AnimatorListener
onAnimationStart()
- Called when the animation starts.onAnimationEnd()
- Called when the animation ends.onAnimationRepeat()
- Called when the animation repeats itself.onAnimationCancel()
- Called when the animation is canceled. A cancelled animation also callsonAnimationEnd()
, regardless of how they were ended.
ValueAnimator.AnimatorUpdateListener
-
onAnimationUpdate()
- called on every frame of the animation. Listen to this event to use the calculated values generated byValueAnimator
during an animation. To use the value, query theValueAnimator
object passed into the event to get the current animated value with thegetAnimatedValue()
method. Implementing this listener is required if you useValueAnimator
.Depending on what property or object you are animating, you might need to call
invalidate()
on a View to force that area of the screen to redraw itself with the new animated values. For example, animating the color property of a Drawable object only cause updates to the screen when that object redraws itself. All of the property setters on View, such assetAlpha()
andsetTranslationX()
invalidate the View properly, so you do not need to invalidate the View when calling these methods with new values.
-
You can extend the AnimatorListenerAdapter
class instead of
implementing the Animator.AnimatorListener
interface, if you do not
want to implement all of the methods of the Animator.AnimatorListener
interface. The AnimatorListenerAdapter
class provides empty
implementations of the methods that you can choose to override.
For example, the following code snippet creates an AnimatorListenerAdapter
for just the onAnimationEnd()
callback:
Kotlin
ObjectAnimator.ofFloat(newBall, "alpha", 1f, 0f).apply { duration = 250 addListener(object : AnimatorListenerAdapter() { override fun onAnimationEnd(animation: Animator) { balls.remove((animation as ObjectAnimator).target) } }) }
Java
ValueAnimator fadeAnim = ObjectAnimator.ofFloat(newBall, "alpha", 1f, 0f); fadeAnim.setDuration(250); fadeAnim.addListener(new AnimatorListenerAdapter() { public void onAnimationEnd(Animator animation) { balls.remove(((ObjectAnimator)animation).getTarget()); }
Animate layout changes to ViewGroup objects
The property animation system provides the capability to animate changes to ViewGroup objects as well as provide an easy way to animate View objects themselves.
You can animate layout changes within a ViewGroup with the
LayoutTransition
class. Views inside a ViewGroup can
go through an appearing and disappearing animation when you add them to or
remove them from a ViewGroup or when you call a View's
setVisibility()
method with
VISIBLE
, INVISIBLE
, or
GONE
. The remaining Views in the ViewGroup can also
animate into their new positions when you add or remove Views. You can define
the following animations in a LayoutTransition
object
by calling setAnimator()
and passing in an Animator
object with one of the
following LayoutTransition
constants:
APPEARING
- A flag indicating the animation that runs on items that are appearing in the container.CHANGE_APPEARING
- A flag indicating the animation that runs on items that are changing due to a new item appearing in the container.DISAPPEARING
- A flag indicating the animation that runs on items that are disappearing from the container.CHANGE_DISAPPEARING
- A flag indicating the animation that runs on items that are changing due to an item disappearing from the container.
You can define your own custom animations for these four types of events to customize the look of your layout transitions or just tell the animation system to use the default animations.
To set the android:animateLayoutchanges
attribute to true
for the
ViewGroup do the following:
<LinearLayout android:orientation="vertical" android:layout_width="wrap_content" android:layout_height="match_parent" android:id="@+id/verticalContainer" android:animateLayoutChanges="true" />
Setting this attribute to true automatically animates Views that are added or removed from the ViewGroup as well as the remaining Views in the ViewGroup.
Animate view state changes using StateListAnimator
The StateListAnimator
class lets you define animators that run when
the state of a view changes. This object behaves as a wrapper for an
Animator
object, calling that animation whenever the specified
view state (such as "pressed" or "focused") changes.
The StateListAnimator
can be defined in an XML resource with a root
<selector>
element and child <item>
elements that each specify
a different view state defined by the StateListAnimator
class. Each
<item>
contains the definition for a property animation set.
For example, the following file creates a state list animator that changes the x and y scale of the view when it's pressed:
res/xml/animate_scale.xml
<?xml version="1.0" encoding="utf-8"?> <selector xmlns:android="http://schemas.android.com/apk/res/android"> <!-- the pressed state; increase x and y size to 150% --> <item android:state_pressed="true"> <set> <objectAnimator android:propertyName="scaleX" android:duration="@android:integer/config_shortAnimTime" android:valueTo="1.5" android:valueType="floatType"/> <objectAnimator android:propertyName="scaleY" android:duration="@android:integer/config_shortAnimTime" android:valueTo="1.5" android:valueType="floatType"/> </set> </item> <!-- the default, non-pressed state; set x and y size to 100% --> <item android:state_pressed="false"> <set> <objectAnimator android:propertyName="scaleX" android:duration="@android:integer/config_shortAnimTime" android:valueTo="1" android:valueType="floatType"/> <objectAnimator android:propertyName="scaleY" android:duration="@android:integer/config_shortAnimTime" android:valueTo="1" android:valueType="floatType"/> </set> </item> </selector>
To attach the state list animator to a view, add the
android:stateListAnimator
attribute as follows:
<Button android:stateListAnimator="@xml/animate_scale" ... />
Now the animations defined in animate_scale.xml
are used when this button's
state changes.
Or to instead assign a state list animator to a view in your code, use the
AnimatorInflater.loadStateListAnimator()
method, and assign the animator to
your view with the View.setStateListAnimator()
method.
Or instead of animating properties of the view, you can play a drawable animation between
state changes, using AnimatedStateListDrawable
.
Some of the system widgets in
Android 5.0 use these animations by default. The following example shows how
to define an AnimatedStateListDrawable
as an XML resource:
<!-- res/drawable/myanimstatedrawable.xml --> <animated-selector xmlns:android="http://schemas.android.com/apk/res/android"> <!-- provide a different drawable for each state--> <item android:id="@+id/pressed" android:drawable="@drawable/drawableP" android:state_pressed="true"/> <item android:id="@+id/focused" android:drawable="@drawable/drawableF" android:state_focused="true"/> <item android:id="@id/default" android:drawable="@drawable/drawableD"/> <!-- specify a transition --> <transition android:fromId="@+id/default" android:toId="@+id/pressed"> <animation-list> <item android:duration="15" android:drawable="@drawable/dt1"/> <item android:duration="15" android:drawable="@drawable/dt2"/> ... </animation-list> </transition> ... </animated-selector>
Use a TypeEvaluator
If you want to animate a type that is unknown to the Android system, you can create your own
evaluator by implementing the TypeEvaluator
interface. The types that
are known by the Android system are int
, float
, or a color, which are
supported by the IntEvaluator
, FloatEvaluator
, and ArgbEvaluator
type
evaluators.
There is only one method to implement in the TypeEvaluator
interface, the evaluate()
method. This allows
the animator that you are using to return an appropriate value for your animated property at the
current point of the animation. The FloatEvaluator
class demonstrates
how to do this:
Kotlin
private class FloatEvaluator : TypeEvaluator<Any> { override fun evaluate(fraction: Float, startValue: Any, endValue: Any): Any { return (startValue as Number).toFloat().let { startFloat -> startFloat + fraction * ((endValue as Number).toFloat() - startFloat) } } }
Java
public class FloatEvaluator implements TypeEvaluator { public Object evaluate(float fraction, Object startValue, Object endValue) { float startFloat = ((Number) startValue).floatValue(); return startFloat + fraction * (((Number) endValue).floatValue() - startFloat); } }
Note: When ValueAnimator
(or ObjectAnimator
) runs, it calculates a current elapsed fraction of the
animation (a value between 0 and 1) and then calculates an interpolated version of that depending
on what interpolator that you are using. The interpolated fraction is what your TypeEvaluator
receives through the fraction
parameter, so you do
not have to take into account the interpolator when calculating animated values.
Use Interpolators
An interpolator define how specific values in an animation are calculated as a function of time. For example, you can specify animations to happen linearly across the whole animation, meaning the animation moves evenly the entire time, or you can specify animations to use non-linear time, for example, using acceleration or deceleration at the beginning or end of the animation.
Interpolators in the animation system receive a fraction from Animators that represent the
elapsed time of the animation. Interpolators modify this fraction to coincide with the type of
animation that it aims to provide. The Android system provides a set of common interpolators in
the android.view.animation package
. If none of these suit your
needs, you can implement the TimeInterpolator
interface and create your
own.
As an example, how the default interpolator AccelerateDecelerateInterpolator
and the LinearInterpolator
calculate interpolated fractions are compared below.
The LinearInterpolator
has no effect on the elapsed fraction. The AccelerateDecelerateInterpolator
accelerates into the animation and
decelerates out of it. The following methods define the logic for these interpolators:
AccelerateDecelerateInterpolator
Kotlin
override fun getInterpolation(input: Float): Float = (Math.cos((input + 1) * Math.PI) / 2.0f).toFloat() + 0.5f
Java
@Override public float getInterpolation(float input) { return (float)(Math.cos((input + 1) * Math.PI) / 2.0f) + 0.5f; }
LinearInterpolator
Kotlin
override fun getInterpolation(input: Float): Float = input
Java
@Override public float getInterpolation(float input) { return input; }
The following table represents the approximate values that are calculated by these interpolators for an animation that lasts 1000ms:
ms elapsed | Elapsed fraction/Interpolated fraction (Linear) | Interpolated fraction (Accelerate/Decelerate) |
---|---|---|
0 | 0 | 0 |
200 | .2 | .1 |
400 | .4 | .345 |
600 | .6 | .8 |
800 | .8 | .9 |
1000 | 1 | 1 |
As the table shows, the LinearInterpolator
changes the values
at the same speed, .2 for every 200ms that passes. The AccelerateDecelerateInterpolator
changes the values faster than LinearInterpolator
between 200ms and 600ms and slower between 600ms and
1000ms.
Specify keyframes
A Keyframe
object consists of a time/value pair that lets you define
a specific state at a specific time of an animation. Each keyframe can also have its own
interpolator to control the behavior of the animation in the interval between the previous
keyframe's time and the time of this keyframe.
To instantiate a Keyframe
object, you must use one of the factory
methods, ofInt()
, ofFloat()
, or ofObject()
to obtain the appropriate type of Keyframe
. You then call
the ofKeyframe()
factory method to
obtain a PropertyValuesHolder
object. Once you have the object, you can
obtain an animator by passing in the PropertyValuesHolder
object and
the object to animate. The following code snippet demonstrates how to do this:
Kotlin
val kf0 = Keyframe.ofFloat(0f, 0f) val kf1 = Keyframe.ofFloat(.5f, 360f) val kf2 = Keyframe.ofFloat(1f, 0f) val pvhRotation = PropertyValuesHolder.ofKeyframe("rotation", kf0, kf1, kf2) ObjectAnimator.ofPropertyValuesHolder(target, pvhRotation).apply { duration = 5000 }
Java
Keyframe kf0 = Keyframe.ofFloat(0f, 0f); Keyframe kf1 = Keyframe.ofFloat(.5f, 360f); Keyframe kf2 = Keyframe.ofFloat(1f, 0f); PropertyValuesHolder pvhRotation = PropertyValuesHolder.ofKeyframe("rotation", kf0, kf1, kf2); ObjectAnimator rotationAnim = ObjectAnimator.ofPropertyValuesHolder(target, pvhRotation); rotationAnim.setDuration(5000);
Animate views
The property animation system allow streamlined animation of View objects and offers a few advantages over the view animation system. The view animation system transformed View objects by changing the way that they were drawn. This was handled in the container of each View, because the View itself had no properties to manipulate. This resulted in the View being animated, but caused no change in the View object itself. This led to behavior such as an object still existing in its original location, even though it was drawn on a different location on the screen. In Android 3.0, new properties and the corresponding getter and setter methods were added to eliminate this drawback.
The property animation system
can animate Views on the screen by changing the actual properties in the View objects. In
addition, Views also automatically call the invalidate()
method to refresh the screen whenever its properties are changed. The new properties in the View
class that facilitate property animations are:
translationX
andtranslationY
: These properties control where the View is located as a delta from its left and top coordinates which are set by its layout container.rotation
,rotationX
, androtationY
: These properties control the rotation in 2D (rotation
property) and 3D around the pivot point.scaleX
andscaleY
: These properties control the 2D scaling of a View around its pivot point.pivotX
andpivotY
: These properties control the location of the pivot point, around which the rotation and scaling transforms occur. By default, the pivot point is located at the center of the object.x
andy
: These are simple utility properties to describe the final location of the View in its container, as a sum of the left and top values and translationX and translationY values.alpha
: Represents the alpha transparency on the View. This value is 1 (opaque) by default, with a value of 0 representing full transparency (not visible).
To animate a property of a View object, such as its color or rotation value, all you need to do is create a property animator and specify the View property that you want to animate. For example:
Kotlin
ObjectAnimator.ofFloat(myView, "rotation", 0f, 360f)
Java
ObjectAnimator.ofFloat(myView, "rotation", 0f, 360f);
For more information on creating animators, see the sections on animating with ValueAnimator and ObjectAnimator.
Animate using ViewPropertyAnimator
The ViewPropertyAnimator
provides a simple way to animate several
properties of a View
in parallel, using a single underlying Animator
object. It behaves much like an ObjectAnimator
, because it modifies the
actual values of the view's properties, but is more efficient when animating many properties at
once. In addition, the code for using the ViewPropertyAnimator
is much
more concise and easier to read. The following code snippets show the differences in using multiple
ObjectAnimator
objects, a single
ObjectAnimator
, and the ViewPropertyAnimator
when
simultaneously animating the x
and y
property of a view.
Multiple ObjectAnimator objects
Kotlin
val animX = ObjectAnimator.ofFloat(myView, "x", 50f) val animY = ObjectAnimator.ofFloat(myView, "y", 100f) AnimatorSet().apply { playTogether(animX, animY) start() }
Java
ObjectAnimator animX = ObjectAnimator.ofFloat(myView, "x", 50f); ObjectAnimator animY = ObjectAnimator.ofFloat(myView, "y", 100f); AnimatorSet animSetXY = new AnimatorSet(); animSetXY.playTogether(animX, animY); animSetXY.start();
One ObjectAnimator
Kotlin
val pvhX = PropertyValuesHolder.ofFloat("x", 50f) val pvhY = PropertyValuesHolder.ofFloat("y", 100f) ObjectAnimator.ofPropertyValuesHolder(myView, pvhX, pvhY).start()
Java
PropertyValuesHolder pvhX = PropertyValuesHolder.ofFloat("x", 50f); PropertyValuesHolder pvhY = PropertyValuesHolder.ofFloat("y", 100f); ObjectAnimator.ofPropertyValuesHolder(myView, pvhX, pvhY).start();
ViewPropertyAnimator
Kotlin
myView.animate().x(50f).y(100f)
Java
myView.animate().x(50f).y(100f);
For more detailed information about ViewPropertyAnimator
, see the corresponding Android Developers
blog
post.
Declare animations in XML
The property animation system lets you declare property animations with XML instead of doing it programmatically. By defining your animations in XML, you can easily reuse your animations in multiple activities and more easily edit the animation sequence.
To distinguish animation files that use the new property animation APIs from those that use the
legacy view animation framework,
starting with Android 3.1, you should save the XML files for property animations in the res/animator/
directory.
The following property animation classes have XML declaration support with the following XML tags:
ValueAnimator
-<animator>
ObjectAnimator
-<objectAnimator>
AnimatorSet
-<set>
To find the attributes that you can use in your XML declaration, see Animation resources. The following example plays the two sets of object animations sequentially, with the first nested set playing two object animations together:
<set android:ordering="sequentially"> <set> <objectAnimator android:propertyName="x" android:duration="500" android:valueTo="400" android:valueType="intType"/> <objectAnimator android:propertyName="y" android:duration="500" android:valueTo="300" android:valueType="intType"/> </set> <objectAnimator android:propertyName="alpha" android:duration="500" android:valueTo="1f"/> </set>
In order to run this animation, you must inflate the XML resources in your code to an AnimatorSet
object, and then set the target objects for all of the animations
before starting the animation set. Calling setTarget()
sets a single target object for all children of the AnimatorSet
as a convenience. The following code shows how to do this:
Kotlin
(AnimatorInflater.loadAnimator(myContext, R.animator.property_animator) as AnimatorSet).apply { setTarget(myObject) start() }
Java
AnimatorSet set = (AnimatorSet) AnimatorInflater.loadAnimator(myContext, R.animator.property_animator); set.setTarget(myObject); set.start();
You can also declare a ValueAnimator
in XML, as
shown in the following example:
<animator xmlns:android="http://schemas.android.com/apk/res/android" android:duration="1000" android:valueType="floatType" android:valueFrom="0f" android:valueTo="-100f" />
To use the previous ValueAnimator
in your code, you
must inflate the object, add an
AnimatorUpdateListener
,
get the updated animation value, and use it in a property of one of your views,
as shown in the following code:
Kotlin
(AnimatorInflater.loadAnimator(this, R.animator.animator) as ValueAnimator).apply { addUpdateListener { updatedAnimation -> textView.translationX = updatedAnimation.animatedValue as Float } start() }
Java
ValueAnimator xmlAnimator = (ValueAnimator) AnimatorInflater.loadAnimator(this, R.animator.animator); xmlAnimator.addUpdateListener(new ValueAnimator.AnimatorUpdateListener() { @Override public void onAnimationUpdate(ValueAnimator updatedAnimation) { float animatedValue = (float)updatedAnimation.getAnimatedValue(); textView.setTranslationX(animatedValue); } }); xmlAnimator.start();
For information about the XML syntax for defining property animations, see Animation resources .
Potential effects on UI performance
Animators that update the UI cause extra rendering work for every frame in which the animation runs. For this reason, using resource intensive animations can negatively impact the performance of your app.
Work required to animate your UI is added to the animation stage of the rendering pipeline. You can find out if your animations impact the performance of your app by enabling Profile GPU Rendering and monitoring the animation stage. For more information, see Profile GPU rendering walkthrough.