172 I1909e 000 46 Es 0001

Compañía Minera Doña Inés de Collahuasi S.C.M.
P172
CONTRATO MARCO SERVICIOS DE INGENIERÍA
PRI1909E
“SERVICIO DE INGENIERÍA DE DETALLES Y COMPRAS

5to MOLINO DE BOLAS”
ESPECIFICACIÓN TÉCNICA
DE
MATERIALES DE CAÑERÍAS, FITTINGS Y VÁLVULAS
Aprobado 172-I1909E-000-46-ES-0001 Aprobado

28-09-2022 26418-220-3PS-P000-00001 M Mardones
C. Henríquez V. 3-10-2022
Aguilar
Digitally signed by: Aguilar
Ramirez Ramirez A.,
Digitally signed by: Ramirez
Contreras, Carlos(CSAGUILA)
DN: CN = Aguilar Contreras,
Sandoval, Claudio(CRAMIREZ)
DN: CN = Ramirez Sandoval,
[email protected]
Contreras, Sandoval, Mauricio
Carlos(CSAGUILA) email =
[email protected] OU =
Claudio(CRAMIREZ) C = US O
= Bechtel Global Corporation 2022.09.27 16:40:42 -
Carlos 01_Users, AMERS, STO Claudio Date: 2022.09.27 15:33:54 - 2022.09.27 16:
(CSAGUILA)
Date: 2022.09.27 08:44:03 -
03'00' (CRAMIREZ)
03'00'
34:25 -03'00' 03'00'
1 26-Sep-21 Construcción CAC CRS MRA MAV

0 13-Dic-21 Construcción JSG MRA MRA WMT
B 23-Nov-21 Aprobación JSG MRA MRA WMT
A 25-Ago-21 Coordinación JSG MRA MRA WMT
REV. FECHA EMITIDO PARA POR REV. APR. APR. REV. APR.
SUP.
BECHTEL CHILE CMDIC
BECHTEL CHILE LTDA
Sin comentarios
J. Ahumada
30Sep2022
El uso del Informe queda sujeto a las restricciones que se establecen en el Aviso Importante
Los documentos electrónicos, una vez impresos, se consideran no controlados y pueden estar obsoletos.
Compruebe en Aconex para la revisión actual.
Confidencial Bechtel © Bechtel Chile Ltda. 2021, 2022. Todos los derechos reservados.
COMPAÑÍA MINERA DOÑA INES DE GERENCIA DE PROYECTOS
COLLAHUASI
ESPECIFICACIÓN TÉCNICA DE
MATERIALES DE CAÑERÍAS, FITTINGS Y
VÁLVULAS
PRÓXIMA
N° CMDIC EMISIÓN REVISIÓN RESPONSABLES PÁGINA N° BECHTEL
REVISIÓN
Generado: CAC
172-I1909E-000-46-ES-0001 26-Sep-2022 1 - Revisado: MRA 2 de 23 26418-220-3PS-P000-00001
Aprobado: MAV
TABLA DE CONTENIDOS
SECCIÓN PÁGINA
1 INTRODUCCIÓN 3
2 CÓDIGOS Y ESTÁNDARES 3
3 REFERENCIAS 5
4 DESIGNACIÓN DE ÍTEMS DE CAÑERÍAS 5
5 CONVERSIÓN DE LOS DIÁMETROS NOMINALES DE CAÑERÍAS 8
6 ÍNDICE DE CLASES DE MATERIALES 10
7 COMPONENTES NO ESPECIFICADOS 10
8 ANEXO 1: ABREVIACIONES 11
9 ANEXO 2: CODIFICACIÓN DE FLUIDOS 19
10 ANEXO 3: ÍNDICE DE CLASES Y SERVICIOS 21
11 ANEXO 4: HOJAS DE CLASES Y SERVICIOS 22
12 ANEXO 5: DESCRIPCIÓN DE COMPRAS PARA BECHTEL STOCK CODES 23
COLLAHUASI
VÁLVULAS
PRÓXIMA
REVISIÓN
Generado: CAC
Aprobado: MAV
1 INTRODUCCIÓN
Compañía Minera Doña Inés de Collahuasi (CMDIC) ha encargado a Bechtel Chile el
desarrollo del proyecto "Servicio de Ingeniería de Detalles y Compras 5to Molino de
Bolas", que considera la implementación del 5to Molino de Bolas y sus instalaciones
auxiliares para alcanzar una capacidad de procesamiento de la Planta Concentradora
Ujina de 170 ktpd nominales.
1.1 Alcance
Esta especificación cubre los requerimientos mínimos para la selección de cañerías,

fittings y válvulas, que se usarán en las líneas de proceso y servicios del proyecto
“Servicio de Ingeniería de Detalles y Compras 5to Molino de Bolas".
2 CÓDIGOS Y ESTÁNDARES
2.1 Códigos y estándares generales
Todos los diseños, materiales, fabricación e inspección deberán estar conforme a las
últimas ediciones de los estándares nacionales e internacionales y regulaciones del
gobierno chileno. Los siguientes son las organizaciones que bajo sus estándares regirán
esta especificación:
ANSI American National Standards Institute
ASME American Society of Mechanical Engineers
AWWA American Water Work Association
API American Petroleum Institute Standards
ASTM American Society for Testing Materials
AWS American Welding Society
MSS Manufacturer’s standardization Society
MSHA Mine Safety and Health Administration
NFPA National Fire Protection Association
COLLAHUASI
VÁLVULAS
PRÓXIMA
REVISIÓN
Generado: CAC
Aprobado: MAV
ISO International Organization for standardization
INN Instituto Nacional de Normalización
OSHA Occupational Safety and Health Administration (OSHA) U.S.

Department of labor: Occupational Safety and Health Standards
and all amendments thereto Safety and Health Regulations for
Construction and all amendments thereto (promulgated by
Bureau of Labor Standards, U.S. Department of Labor).
FM Factory Mutual Engineering Division Recommended Practices
UL Underwriters Laboratories, Inc. Standards
SAE Society of Automotive Engineers
DIN Deutsche Institute Normen
NACE National Association of Corrosion Engineers
NCh 283 Presiones para Diseño y Cálculo de Circuitos Destinados a la

Conducción de Fluidos
NCh 691 Agua Potable – Conducción, Regulación y Distribución
PFI Pipe Fabrication Institute
2.2 Códigos específicos
Los siguientes son las organizaciones que bajo sus estándares regirán esta
especificación:
ASME B31.3 Process Piping
ASME B31.4 Pipeline Transportation Systems for Liquids and Slurries
API Spec 5L Line Pipe
ISO 161-1 Thermoplastic pipe for the conveyance of fluid. Nominal outside
diameters and nominal pressure
AWWA C200 Steel Water Pipe – 6 in. (150 mm) and larger
COLLAHUASI
VÁLVULAS
PRÓXIMA
REVISIÓN
Generado: CAC
Aprobado: MAV
AWWA C200 Steel Water Pipe – 6 in. (150 mm) and larger
NCh 19-79 Prevención de riesgos - Identificación de sistemas de cañerías
3 REFERENCIAS
Además de los códigos anteriormente indicados, serán aplicables los siguientes
documentos del Proyecto:
172-I1909E-000-46-DC-0002 Adenda al Criterio de Diseño de Cañerías

(26418-220-3DR-P01-00002)
4 DESIGNACIÓN DE ÍTEMS DE CAÑERÍAS

4.1 Designación de líneas
La siguiente será la codificación para la designación de las cañerías en los P&IDs, planos
de diseño y en general donde sea requerido:
XX - XXX - XX - XXXXX - XXXXXX - XX
Diámetro Nominal
Código Área
Código Fluido
N° Identificación Línea
Clase de Material
Aislación / Cinta Calefactora
Ejemplo: 20” – 144 – SL – 00101 - L1E0VJ - NI
COLLAHUASI
VÁLVULAS
PRÓXIMA
REVISIÓN
Generado: CAC
Aprobado: MAV
Notas:
1. Diámetro Nominal: Unidades deben ser en pulgadas, con uno (3”) o dos (24”) dígitos.
2. Área: Es la designación de área del proyecto desde donde la línea se origina y
mantiene la misma hasta que termina la línea, incluso cuando la línea pase a través
de varias áreas.
3. Código del Fluido: Deben ser dos o tres dígitos. Ver Anexo 2.
4. N° Identificación de la Línea: Será único para cada línea. El número se mantendrá
durante todo el recorrido de la línea, incluso si el diámetro, clase, área o servicio
cambien. Números cancelados no deben ser reusados. Serán cinco dígitos.
5. Clase de Material: Ver Anexo 3
6. Nomenclatura para Aislación / Heat Tracing: Deben ser dos o tres dígitos:
NI = Sin Aislación
WI = Con Aislación
WIE = Con Aislación y Cinta Calefactora
Aislación y cintas calefactoras son mostradas en los P&ID y el listado de líneas del
proyecto.
4.2 Designación número de isométrico de cañerías
La siguiente será la codificación para la designación de isométricos de líneas:
XXX - XX - XXXXX - XXXXX - XX
Código Área
Código Fluido
N° Identificación Línea
N° Volúmen de Diseño
N° de Hoja
Ejemplo: 144 – SL – 00101 – 0144A – 01
COLLAHUASI
VÁLVULAS
PRÓXIMA
REVISIÓN
Generado: CAC
Aprobado: MAV
Notas:
1. Área: Será el mismo usado para el número de línea desde el cual fue extraído el
isométrico.
2. Código del Fluido: Será el mismo usado para el número de línea desde el cual fue
extraído el isométrico.
3. N° Identificación de la Línea: Será el mismo usado para el número de línea desde el
cual fue extraído el isométrico.
4. N° de Volumen de Diseño: Es una división del área, normalmente en base a
volúmenes, basado en un área física de la planta definida por ingeniería, control de
proyecto y basado en el programa de instalación de construcción. Deben ser cinco
números
5. N° de Hoja: Número de hoja del isométrico. La primera hoja del isométrico deberá
comenzar con “01” y continuar secuencialmente siguiendo el orden del límite de
batería del isométrico de la línea. Deben ser dos dígitos.
4.3 Designación de número de plano isométrico (Numeración Bechtel)
La siguiente será la codificación para la designación del número de plano isométrico:
26418 - 220 - P3 - XXX - XX - XXXXX - XXXXX - XX
N° de Proyecto
Sub Número
Tipo de Plano
N° de Isométrico
Ejemplo: 26418 – 220 – P3 – 144 – SL – 00101 – 0144A – 01
COLLAHUASI
VÁLVULAS
PRÓXIMA
REVISIÓN
Generado: CAC
Aprobado: MAV
Notas:
1. Número de Proyecto: Corresponde al número de proyecto Bechtel, en este caso es

26418.
2. Sub Número: Corresponde a la fase del proyecto (220 es Ingeniería)
3. Tipo de Plano: Corresponde al tipo de plano, en este caso Isométrico es P3
4. Número de Isométrico: Designación de número de isométrico, ver sección 4.3.
4.4 Designación de número de plano isométrico (Numeración CMDIC)
La numeración de planos isométricos sigue la convención de numeración CMDIC

definida en Doc. CMDIC N°PGP-I-000-GUZ- 003 Rev. 0, la cual es la siguiente:
172 - I1909E- 000 - 46 - DW - XXXX
N° Consecutivo (0101 al 0400)
4.5 Designación del número de spool
Los números de spool son asignados automáticamente como parte del proceso de
extracción de isométricos y tendrá el número del isométrico seguido de un número de
marca de spool, como se indica a continuación:
Ejemplo 1: 144 – SL – 00101 – 0144A – 01 – 1
(Spool # 1 del isométrico 144 – SL – 00101 – 0144A – 01)
Ejemplo 2: 144 – SL – 00101 – 0144A – 01 – 2

(Spool # 2 del isométrico 144 – SL – 00101 – 0144A – 01)
5 CONVERSIÓN DE LOS DIÁMETROS NOMINALES DE CAÑERÍAS

La conversión de los diámetros nominales en pulgadas y milímetros de los diferentes
materiales de las cañerías que se utilizarán en el proyecto se muestra en la Sección 8
COLLAHUASI
VÁLVULAS
PRÓXIMA
REVISIÓN
Generado: CAC
Aprobado: MAV
Anexos, Tabla 2, del documento Adenda al Criterio de Diseño de Cañerías No. 172-
I1909E-000-46-DC-0002 (26418-220-3DR-P01-00002), y que se muestra a continuación:
RELACIÓN DE DIÁMETROS NOMINALES EN CAÑERÍAS
COLLAHUASI
VÁLVULAS
PRÓXIMA
REVISIÓN
Generado: CAC
Aprobado: MAV
6 ÍNDICE DE CLASES DE MATERIALES

6.1 Presión y temperatura
Las presiones y temperaturas referidas en las hojas de clases son las condiciones
máximas de diseño para cada clase, la operación de cada servicio no deberá exceder
las condiciones de diseño allí indicadas.
6.2 Fabricantes
Los nombres de fabricantes y números de referencia de catálogos para válvulas,

cañerías y accesorios serán mencionados sólo para propósitos descriptivos.
Equivalencias o mejores ítems de otros fabricantes pueden ser utilizados una vez
revisados y aprobados por Ingeniería del proyecto.
7 COMPONENTES NO ESPECIFICADOS
Componentes no listados en las hojas de clases son considerados fuera de
especificación y serán identificados con un código especial en los planos destinados a
componentes especiales.
COLLAHUASI
VÁLVULAS
PRÓXIMA
REVISIÓN
Generado: CAC
Aprobado: MAV
8 ANEXO 1: ABREVIACIONES
Abreviación Inglés Español

°C Degree Celsius Grados Celsius
AG Aboveground Sobre terreno
Amb Ambient Ambiente
Asphalt External Surfaces Will Be Asphaltic Coated Recubrimiento exterior asfalto
Atm Atmosphere Atmósfera

Conexión cuerpo y vástago apernado
BB Bolted Bonnet
(bonete apernado)
BC Bolted Cap Tapa apernada
BBE Both Beveled Ends Ambos extremos biselados
Bell Bell End Extremo acampanado
Bell/w/gask Bell End with Gasket Extremo campana con empaquetadura
BexGE Beveled One End, Grooved One End Un extremo biselado y el otro ranurado
BF Butt Fusion Soldadura por fusión
Bfly-FlgAdt Butterfly Flange Adapter Flange adaptador para válvula mariposa
Bevel Large End x Threaded NPT Small Biselado diámetro mayor y roscado
BLE/TSE
End diámetro menor
BrMNPT With MNPT Branch Outlet Ramal de salida con rosca macho NPT
BrSize Branch Size Diámetro (tamaño) del ramal
Brz Bronze Bronce
BunaNLnd Lined with Buna-N Rubber Revestido con nitrilo
BunaORg Buna-N O-Ring Empaquetadura O’ring de nitrilo
BUPP IPP Model BUPP Flange Convoluted IPP Modelo BUPP
Flange Convoluted IPP Modelo BUPP-
BUPP-HP IPP Model BUPP-HP
HP
BW Buttweld End Extremo soldado a tope
C&W Coated & Wrapped Revestido y encintado
CB Clamp Bonnet Sombrerete (bonete) con abrazadera
CI Cast Iron Hierro fundido
COLLAHUASI
VÁLVULAS
PRÓXIMA
REVISIÓN
Generado: CAC
Aprobado: MAV

Clamp Pipe Clamp Abrazadera de cañería
Cnvltd Convoluted Design Diseño convoluted (para flange)
CO Chain Operated Operado con cadena
Compress Compression Joint Junta compresión
Conc Concentric Concéntrica
Conn Connection Conexión
CS Carbon Steel Acero carbono
CWP Cold Working Pressure Presión de trabajo en frío
Data Sheet Required with Design Hoja datos con requerimiento de
DataSht.
Conditions. condiciones de diseño
Dbl Double Random Lengths Largo doble variable (aprox. 12 m.)
DI Ductile Iron Hierro dúctil

Flange hierro dúctil roscado cara plana,
DI/Flg 125# Threaded FF Ductile Iron Flange
clase 125 lbs
DSAW Double Submerged Arc Welded Soldadura con doble arco sumergido
DWV Drain, Waste & Vent Drenaje, residuos y venteo

Ecc Eccentric Excéntrica
EF Electrofusion Electrofusión (soldadura)
EFW Electrical Fusion Welded Soldadura eléctrica por fusión
Ell Elbow Codo
E-Oring With EPDM O-ring Empaquetadura EPDM tipo O´ring
EpxyCtd Epoxy Coated Recubrimiento epóxico
ERW Electrical Resistance Welded Soldadura por resistencia eléctrica
Superficies externas revestidas, según

External Surfaces Coated per Project Spec
ExtCU/G especificación de proyecto para cañerías
for buried Service (underground U/G)
enterradas.
COLLAHUASI
VÁLVULAS
PRÓXIMA
REVISIÓN
Generado: CAC
Aprobado: MAV
Externally Coated with Polyethylene by Revestimiento externo con polietileno

ExtPECtd
Extrusion Process por proceso de extrusión.
Fabricado de acuerdo a estándar

Fabricated According to Standard ISO/DIN
Fab.ISO/DIN ISO/DIN para cañerías y fittings de
for HDPE pipe and fittings
HDPE.
FF Flat Face Cara plana (flange)
FFBoltHole Flat Full Face with Bolt Holes Cara plana con agujeros para pernos
Flg Flange Flange o brida
Flg Adt Flange Adaptor (Stub-End-HDPE) Porta Flange (cuello HDPE)
FlgdFF Flanged Flat Face End Flange cara plana
FNPT Female National Pipe Thread End Extremo NPT hembra
FM Factory Mutual Approval Aprobación por Factory Mutual
Rosca nacional para tubos

NPT National Pipe Threaded
(Rosca americana cónica para tubos)
FRTJ Female Ring Joint Type Junta tipo anillo hembra

FS Forged Steel Acero forjado
Fuse Wld Fusion Welded Soldadura por Fusión
Galv Galvanized Galvanizado
GE,SqCut Grooved End, Square Cut Extremo ranurado, corte cuadrado
GO Gear Operated Operado con reductor
Gr Grade Grado
GE Grooved End Extremo ranurado
Primera dimensión es de cañería matriz,

HbyB Header by Branch Size
segunda del arranque
HCO Hydraulic Cylinder Operated Operado con cilindro hidráulico
COLLAHUASI
VÁLVULAS
PRÓXIMA
REVISIÓN
Generado: CAC
Aprobado: MAV

HDPE High density Polyethylene Polietileno de alta densidad
Hex Hexagonal Hexagonal
HexHd Hexagonal Head Cabeza hexagonal
HP High Pressure Alta presión
HT Reqd Hydrostatic Test Required Requiere prueba hidrostática
HWO Handweel Operator Operador con volante
Superficie interna y externa revestida

Internal & External Surfaces Coated per
I&ECU/G según especificaciones del proyecto
Project Spec, buried U/G
para cañerías enterradas.
IBBM Iron Body Bronze Mounted Cuerpo de hierro con interior de bronce
Internal (Coated) & External (Primer) shall Revestimento interior y pintura exterior,
IC&EP
be per Project Specifications según especificaciones del proyecto.
ID Inside Diameter Diámetro interior
IDIn for I.D. Installation Para instalación en diámetro interior
in Inches Pulgadas
IntFlgAdt Integral Flange Adapter Flange adaptador integral
IntSeat Integral Seat Asiento integral
ISRS Inside Screw Rising Stem Vástago interno roscado, ascendente
kg Kilogram Kilogramo
l Liters Litros
LapJnt Lap Joint Junta o Unión sobrepuesta
LapJtFlg Lap-Joint Flange Flange sobrepuesto o suelto
lb Pound Libra
LbyD Length by Nominal Pipe Diameter Largo por diámetro nominal de la cañería
LF Large Female Diámetro mayor hembra

LJFlg Lap Joint Flanged Ends Extremos con flange suelto
COLLAHUASI
VÁLVULAS
PRÓXIMA
REVISIÓN
Generado: CAC
Aprobado: MAV

LM Large Male Diámetro mayor macho
LO Lever Operated Operador con palanca
LP Low Pressure Baja presión
LR Long Radius Radio largo
LR90El Long Radius 90 degree Elbow Codo de 90 grados radio largo
LtWt Light Weight Type Tipo liviano (Flanges)

Lub Lubricated Lubricado
Lug Lugged Con orejas roscadas (válvulas)
Manuf Std Mat Manufacturers Standard Material Material por estándar del fabricante
Max Maximum Máximo

Mfr Manufacturer Fabricante
MfrDims Per Manufacturers Standard Dimensions Dimensiones por estándar del fabricante
MfrStd Marking per Manufacturer's Standard Marcado por estándar del fabricante
MI Malleable Iron Hierro maleable

Min Minimum Mínimo
Segmentado o mitrado (codos, curvas,
MITER Mitered
etc.)
MJ Mechanical Joint Junta mecánica
mm Millimeter Milímetro
MNPT Male National Pipe Thread End Extremo NPT macho
Mold Molded Moldeado

Revestimiento de goma levemente
MORL Moderate Oil Resistant Rubber Lined
resistente a los aceites
MP Medium Pressure Media Presión
MPa Megapascal Megapascal
MxF S/Weld Male x Female Socketweld Ends Extremos macho x hembra soqueteados
COLLAHUASI
VÁLVULAS
PRÓXIMA
REVISIÓN
Generado: CAC
Aprobado: MAV
Revestimiento con goma natural con

NatRL1/2 Lined with 1/2" Thick Natural Rubber
espesor ½”
Revestimiento con goma natural con

NatRL1/4 Lined with 1/4" Thick Natural Rubber
espesor ¼”
Lined with 1/2” Thick Moderately Oil Revestimiento de goma moderadamente

MORL1/2
Resistant resistente a los aceites con espesor ½”
Lined with 1/4” Thick Moderately Oil Revestimiento de goma moderadamente

MORL1/4
Resistant resistente a los aceites con espesor ¼”
NOD Nominal Outside Diameter Diámetro Exterior Nominal

NPS Nominal Pipe Size Tamaño nominal de cañería
NPTPlg FNPT with Plug Tapón con rosca NPT hembra
NSR No Rising Stem Vástago no ascendente
NW Nominal Wall Pared (espesor) Nominal
OD Outside Diameter Diámetro Exterior
Vástago roscado y yugo exterior
OS & Y Outside Screw and Yoke
(válvulas con vástago ascendente)
PE Plain Ends Ambos extremos planos
Plain Large End x Threaded NPT Small Diámetro mayor extremo plano por
PLE/TSE
End diámetro menor extremo roscado NPT
PO Pneumatic Operator Operador neumático

Un extremo plano y otro roscado NPT
PE/MNPT Plain End x Threaded NPT Male End
macho
Un extremo plano y otro roscado NPT

PE/FNPT Plain End x Threaded NPT Female End
Hembra
Psi Pound per Square Inch Libras por pulgadas cuadrada
Libras por pulgadas cuadrada
Psig Pound per Square Inch Gauge
manométrica
PTFELnd Polytetrafluoroethylene Lined Revestimiento de Teflón (PTFE)
COLLAHUASI
VÁLVULAS
PRÓXIMA
REVISIÓN
Generado: CAC
Aprobado: MAV
Revestimiento de Cloruro de
PVDCLnd PolyVinylidene Chloride Lined
Polivinilideno (PVDC)
Reinf Pad Reinforcing Pad Manto o poncho de refuerzo

RF Raised Face Cara con resalte (flange)
Ring Ring Type Tipo anillo (empaquetadura)
RL Rubber Lined Revestimiento de goma
S.G. Specific Gravity Gravedad específica
SadBrOlet Saddle Branch Outlet Ramal de salida con montura
Ramal de tee reducción con montura
SadBrReTe Saddle Branch Reducing Tee, Fabricated
fabricada
SAW Submerged Arc Welded Soldadura arco sumergido
Conexión cuerpo-vástago (bonete)
SB Screwed Bonnet
roscado
SBS Single Butt Seam Costura a tope simple
SC Screwed Cap Tapagorro roscado
Sch Schedule Cédula (espesor cañería)
SE Screwed End Extremo roscado
ShortP Short Pattern Cuerpo corto (válvula)
Smls Seamless Sin costura (cañerías y tubos)
Sngl Single Random Lengths Largo simple variable (aprox. 6 m.)
Soc Socket End Extremo soqueteado

SpgtEnd Spigot End Extremo campana
Sq Square Cuadrado
SqCut Square Cut Corte cuadrado (ranurado)
SR Short Radius Radio corto
SS Stainless Steel Acero inoxidable
Std Standard Estándar
T&C Threaded MNPT and Coupled Rosca NPT macho y copla
COLLAHUASI
VÁLVULAS
PRÓXIMA
REVISIÓN
Generado: CAC
Aprobado: MAV
Taper Bore to Match ID of Lined Pipe and Agujero con calce de diámetro interior de
TaprBor
Butterfly Valve cañería revestida y válvula mariposa
Temp Temperature Temperatura

Thd Threaded Roscado
Thk Thick Espesor
Tr Trim Elemento interno de corte (válvulas)
Unión cuerpo-vástago (bonete) en

UB Union Bonnet
válvulas
UG Underground Enterrado o bajo tierra
UL Underwriters Laboratory Approved Aprobado por Underwriters Laboratories
Underwriters Laboratory/FactoryMutual Aprobado por Underwriter Laboratories y

UL/FM
Approved Factory Mutual
Adaptador Victaulic tipo D (anillo para

Vic D-Ring Victaulic Type "D" Adapters
copla)
Vic Typ Victaulic Type Tipo Victaulic (copla)
Vic Typ Sq Victaulic Square Machined Type Ranura mecanizada recta tipo Victaulic
Sistemas de cañerías con ranura

VicGvSys Victaulic Grooved Piping System
Victaulic
VitonORg Viton O-Ring O´ring de viton (empaquetadura)
W/BunaG With Buna-N Gasket Con empaquetadura de Buna-N
W/RubG With Rubber Gasket Con empaquetadura de goma

Wfr Wafer Entre flanges (válvulas)
Wld Welded Soldada
Wt Weight Peso
W.T. Wall Thickness Espesor de pared
COLLAHUASI
VÁLVULAS
PRÓXIMA
REVISIÓN
Generado: CAC
Aprobado: MAV
9 ANEXO 2: CODIFICACIÓN DE FLUIDOS
Service Code Fluid Fluid Description PMC Category Rev

Air System ASME B31.3 AI Instrument Air G1E1A CAT D Rev 0
AP Plant Air C1E2A CAT D Rev 0
EA Exhaust Air S1E0B Normal Fluid Service Rev 0
Fire Water
System NFPA 24 WF Fire Water C1F2A - Rev 0
M2F0H2 - Rev 0
Hydraulic and
Lubrication
System ASME B31.3 GG Grease (LP) S1E0B Normal Fluid Service Rev 0
GO Gear Lubrication Oil (LP) S1E0B Normal Fluid Service Rev 0
HG Grease (HP) SPE0L Normal Fluid Service Rev 0
HO Hydraulic Oil (HP) SPE0L Normal Fluid Service Rev 0
HP Hydraulic Oil (MP) SME0L Normal Fluid Service Rev 1
HY Hydraulic Oil (LP) S1E0B Normal Fluid Service Rev 0
LM Lubrication Oil (MP) SME0L Normal Fluid Service Rev 1
LO Lube Oil Supply (LP) S1E0B Normal Fluid Service Rev 0
LR Lube Oil Return (LP) S1E0B Normal Fluid Service Rev 0
Process System ASME B31.3 OD Oil Drain C1E2B Normal Fluid Service Rev 0
PD Process Drains C1E2R CAT D Rev 0
C1E2V CAT D Rev 0
WE Waste Effluent/Chemical Waste C1E2B Normal Fluid Service Rev 0
S1E0B Normal Fluid Service Rev 0
Reagents
system ASME B31.3 CL1 Primary Collector C1E2B Normal Fluid Service Rev 0
CL2 Secondary Collector (Xanthate) C1E2B Normal Fluid Service Rev 0
DC Carbon Dioxide C1E2A CAT D Rev 0
FL Flocculant C1E2B Normal Fluid Service Rev 0
FO Fuel Oil C1E2B Normal Fluid Service Rev 0
FR Frother (Mixture) C1E2B Normal Fluid Service Rev 0
ML Milk of Lime C1E2R CAT D Rev 0
C1E2V CAT D Rev 0
NG Nitrogen C1E2A CAT D Rev 0
TR Test Reagent C1E2B Normal Fluid Service Rev 0
Slurry System ASME B31.3 CT Concentrate (Copper) C1E2R CAT D Rev 0
COLLAHUASI
VÁLVULAS
PRÓXIMA
REVISIÓN
Generado: CAC
Aprobado: MAV
Service Code Fluid Fluid Description PMC Category Rev

C1E2V CAT D Rev 0
L1E0VJ CAT D Rev 0
L1E0VT CAT D Rev 0
SL Slurry C1E2R CAT D Rev 0
C1E2V CAT D Rev 0
L1E0VJ CAT D Rev 0
L1E0VT CAT D Rev 0
TL Final Tailings C1E2R CAT D Rev 0
C1E2V CAT D Rev 0
L1E0VJ CAT D Rev 0
L1E0VT CAT D Rev 0
Water system ASME B31.3 WC Cooling Water C1E2A CAT D Rev 0
WD Potable Water G1E1A CAT D Rev 0
WG Gland Seal Water C1E2A CAT D Rev 0
WM Reclaim Water C1E2A CAT D Rev 0
WP Process Water C1E2A CAT D Rev 0
WR Make-Up Water (Fresh) C1E2A CAT D Rev 0
WT Treated Water C1E2A CAT D Rev 0
COLLAHUASI
VÁLVULAS
PRÓXIMA
REVISIÓN
Generado: CAC
Aprobado: MAV
10 ANEXO 3: ÍNDICE DE CLASES Y SERVICIOS
Piping Material Class Index Page: 2 of 4
Project Name: INGENIERÍA DE DETALLES Y COMPRAS 5TO MOLINO DE BOLAS
Project Number: 26418 Rev: 1
Document Number: 26418-220-3PS-P000-00001 Date: 26-Sep-22
Class Design Code / P-T Limits Flange Class / Corr Materials

Fluid Serv Cat / Service(s) Flange Facing Pipe Fittings Flanges Gaskets Bolts Valves
C1E2A DES: ASME B31.3 - CAT D NPS 0.5 - 48 CLASS 150 0.0625" • CS A53-B TYPE S, • MI A197 • CS A105, B16.5 • ARAMID W/ NBR • CR-1/5 MO BODY:
1 150 psig @ -29 C RAISED FACE (1.6mm) SMLS • CS A234-WPB, WLD • CS A36, AWWA C207 (BUNA-N) BINDER, A193-B7M, W/ 2 ===============
150 psig @ 38 C • CS A53-B TYPE E, • CS A105, B16.47-A FLAT RING, 1.6mm HVY HEX NUTS, CS • BRS B584-C84400
SERV:
ERW (1/16") THK A194-2H • CS A105N
(AP) Plant Air • CS API 5L-B-PSL2, • ARAMID W/ NBR • CS A105
(NG) Nitrogen EFW, DBL BTT, (BUNA-N) BINDER, • CS A216-WCB
(WC) Cooling Water STRT SM FLAT RING, 3.2mm • CI A126-B
(1/8") THK
(WG) Gland Seal Water • ARAMID W/ NBR TRIM(S):
(WM) Reclaim Water (BUNA-N) BINDER, ===============
FULL FACE, 3.2mm • 316 SS TRIM, RTFE
(WP) Process Water (1/8") THK ST
(WR) Make-Up Water (Fresh) • API 602 TRIM 8
• 316 SS TRIM, PTFE
(DC) Carbon Dioxide
ST
(WT) Treated Water • BRZ TRIM
• API 623 TRIM 16
• API 594 TRIM 10
• 316 SS DISC, RTFE
ST, 17-4 PH SS
STEM
• 316 SS GATE AND
STEM, METAL ST
• API 594 TRIM 5
C1E2B DES: ASME B31.3 NPS 0.5 - 24 CLASS 150 0.0625" • CS A53-B TYPE S, • CS A105 • CS A105, B16.5 • ARAMID W/ NBR • CR-1/5 MO BODY:
1 150 psig @ -29 C RAISED FACE (1.6mm) SMLS • CS A234-WPB, WLD (BUNA-N) BINDER, A193-B7M, W/ 2 ===============
150 psig @ 38 C • CS A53-B TYPE E, FLAT RING, 1.6mm HVY HEX NUTS, CS • CS A105N
SERV:
ERW (1/16") THK A194-2H • CS A105
(CL1) Primary Collector • ARAMID W/ NBR • CS A216-WCB
(CL2) Secondary Collector (BUNA-N) BINDER,
(Xanthate) FLAT RING, 3.2mm TRIM(S):
(FL) Flocculant (1/8") THK ===============
• API 602 TRIM 8
(FO) Fuel Oil
• 316 SS TRIM, RTFE
(FR) Frother (Mixture) ST
(WE) Waste Effluent/Chemical • API 602 TRIM 11
Waste • API 594 TRIM 12
(OD) Oil Drain
(TR) Test Reagent
C1E2R DES: ASME B31.3 - CAT D NPS 0.5 - 48 CLASS 150 0.0625" • CS A53-B TYPE S, • MI A197 • CS A105, B16.5 • ARAMID W/ NBR • CR-1/5 MO BODY:
1 100 psig @ -20 C FLAT FACE (1.6mm) SMLS • CS A234-WPB, WLD • CS A36, AWWA C207 (BUNA-N) BINDER, A193-B7M, W/ 2 ===============
100 psig @ 50 C • CS A53-B TYPE E, FLAT RING, 1.6mm HVY HEX NUTS, CS • CI A126-B
SERV:
ERW (1/16") THK A194-2H • DI A536-65-45-12
(CT) Concentrate (Copper) • CS API 5L-B-PSL2, • ARAMID W/ NBR
(SL) Slurry EFW, DBL BTT, (BUNA-N) BINDER, TRIM(S):
(ML) Milk of Lime STRT SM FLAT RING, 3.2mm ===============
(1/8") THK • 316 SS PLUG/STEM,
(TL) Final Tailings • ARAMID W/ NBR PTFE SLEEVE
(PD) Process Drains (BUNA-N) BINDER, • 316 SS GATE AND
FULL FACE, 3.2mm STEM, NAT. RUB
(1/8") THK SLEEVE MLD
W/STIFF. RING
CRAMIREZ
PMCs : 12 Bechtel Confidential - Set in D.20.11 - CNF_FOOTER Run Date: 23-SEP-2022 09:54:07

C1E2V DES: ASME B31.3 NPS 1 - 48 CLASS 150 0.0625" • CS A53-B TYPE S, • CS A234-WPB, • CS A105, B16.5 • ARAMID W/ NBR • CR-1/5 MO BODY:
0 150 psig @ -20 C FLAT FACE (1.6mm) SMLS SMLS • CS A36, AWWA C207 (BUNA-N) BINDER, A193-B7M, W/ 2 ===============
150 psig @ 50 C • CS A53-B TYPE E, • CS A234-WPB, WLD FLAT RING, 1.6mm HVY HEX NUTS, CS • CS A216-WCB
SERV:
ERW (1/16") THK A194-2H • DI A536-65-45-12
(CT) Concentrate (Copper) • CS API 5L-B-PSL2, • ARAMID W/ NBR
(SL) Slurry EFW, DBL BTT, (BUNA-N) BINDER, TRIM(S):
(ML) Milk of Lime STRT SM FLAT RING, 3.2mm ===============
(1/8") THK • 316 SS PLUG/STEM,
(TL) Final Tailings • ARAMID W/ NBR PTFE SLEEVE
(PD) Process Drains (BUNA-N) BINDER, • 316 SS GATE AND
FULL FACE, 3.2mm STEM, NAT. RUB
(1/8") THK SLEEVE MLD
W/STIFF. RING
C1F2A DES: NFPA 24 NPS 1 - 14 CLASS 150 0.0625" • CS A53-B TYPE S, • CS A105N • CS A105N, B16.5 • 316L SS-PTFE, • CR-1/5 MO BODY:
1 150 psig @ -29 C FLAT FACE (1.6mm) SMLS • CS A234-WPB N, • CS A105, B16.5 SPIRAL WOUND, A193-B7M, W/ 2 ===============
150 psig @ 38 C • CS A53-B TYPE E, SMLS 3.2mm (1/8") THK, HVY HEX NUTS, CS • CS A105N
SERV:
ERW 316L SS INNER A194-2H • CS A216-WCB
(WF) Fire Water RING, 316L SS
OUTER RING TRIM(S):
===============
ST
• API 600 TRIM 8
G1E1A DES: ASME B31.3 - CAT D NPS 0.5 - 24 CLASS 150 0.0625" • CS A53-B TYPE S, • MI A197, GALV • CS A105, B16.5, • ARAMID W/ NBR • CR-1/5 MO BODY:
1 150 psig @ -20 C RAISED FACE (1.6mm) SMLS, GALV • CS A234-WPB, WLD GALV A153 (BUNA-N) BINDER, A193-B7M, W/ 2 ===============
150 psig @ 50 C • CS A53-B TYPE E, • CS A105, B16.5 FLAT RING, 1.6mm HVY HEX NUTS, CS • CS A105N
SERV:
ERW (1/16") THK A194-2H • BRS B584-C84400
(AI) Instrument Air • ARAMID W/ NBR • CS A105
(WD) Potable Water (BUNA-N) BINDER, • CS A216-WCB
FLAT RING, 3.2mm • CI A126-B
(1/8") THK
TRIM(S):
===============
ST
• API 602 TRIM 8
• API 623 TRIM 16
• BRZ TRIM
• 316 SS GATE AND
STEM, METAL ST
• 316 SS DISC, RTFE
ST, 17-4 PH SS
STEM
• API 594 TRIM 10
L1E0VJ DES: ASME B31.3 - CAT D NPS 2 - 52 CLASS 150 0.0" • CS A53-B TYPE S, • CS A234-WPB, • CS A105, B16.5 • ARAMID W/ NBR • CR-1/5 MO BODY:
1 100 psig @ -20 C FLAT FACE SMLS SMLS, 6.4mm (0.25") • CS A36, AWWA C207 (BUNA-N) BINDER, A193-B7M, W/ 2 ===============
100 psig @ 50 C • CS A53-B TYPE E, RUBBER LND FULL FACE, 3.2mm HVY HEX NUTS, CS • CI A126-B
SERV:
ERW • CS A234-WPB, (1/8") THK A194-2H • DI A536-65-45-12
(SL) Slurry • CS API 5L-B-PSL2, WLD, 6.4mm (0.25")
(CT) Concentrate (Copper) EFW, DBL BTT, RUBBER LND TRIM(S):
(TL) Final Tailings STRT SM • CS A234-WPB, ===============
WLD, 12.7mm (0.5") • 316 SS PLUG/STEM,
RUBBER LND PTFE SLEEVE
• 316 SS GATE AND
STEM, NAT. RUB
SLEEVE MLD
W/STIFF. RING
CRAMIREZ

L1E0VT DES: ASME B31.3 - CAT D NPS 2 - 52 CLASS 150 0.0" • CS A53-B TYPE S, • CS A234-WPB, • CS A105, B16.5 • ARAMID W/ NBR • CR-1/5 MO BODY:
1 100 psig @ -20 C FLAT FACE SMLS SMLS, 6.4mm (0.25") • CS A36, AWWA C207 (BUNA-N) BINDER, A193-B7M, W/ 2 ===============
100 psig @ 50 C • CS A53-B TYPE E, RUBBER LND FULL FACE, 3.2mm HVY HEX NUTS, CS • CI A126-B
SERV:
ERW • CS A234-WPB, (1/8") THK A194-2H • DI A536-65-45-12
(SL) Slurry WLD, 6.4mm (0.25")
(CT) Concentrate (Copper) RUBBER LND TRIM(S):
(TL) Final Tailings • CS A234-WPB, ===============
WLD, 12.7mm (0.5") • 316 SS PLUG/STEM,
RUBBER LND PTFE SLEEVE
• CS A234-WPB, • 316 SS GATE AND
WLD, 25.4mm (1.0") STEM, NAT. RUB
CERAMIC RUBBER LND SLEEVE MLD
W/STIFF. RING
M2F0H2 DES: National Fire Protection NPS 4 - 16 PN 16 0.0" • HDPE ISO • HDPE ISO 4427 • CS A105, B16.5, • 316L SS-PTFE, • CR-1/5 MO BODY:
1 Association 220 psig @ 20 C FLAT FACE 4427-PE100, SMLS -PE100, FAB EPX COATED SPIRAL WOUND, A193-B7M, W/ 2 ===============
190 psig @ 30 C • DI A536-65-45-12, 3.2mm (1/8") THK, HVY HEX NUTS, CS • CS A216-WCB
SERV: MFR STD, IPS, 316L SS INNER A194-2H
(WF) Fire Water B16.5 BOLT RING, 316L SS TRIM(S):
PATTERN, EPX OUTER RING ===============
COATED • API 600 TRIM 8
S1E0B DES: ASME B31.3 NPS 0.5 - 12 CLASS 150 0.0" • 304L SS • 304L SS • 304L SS • ARAMID W/ NBR • 304 SS A193-B8 BODY:
1 150 psig @ -29 C RAISED FACE A312-TP304L, SMLS A182-F304L A182-F304L, B16.5 (BUNA-N) BINDER, CL. 2, W/ 2 HVY ===============
150 psig @ 38 C • 304L SS • 304 SS A403 • DI A536-65-45-12, FLAT RING, 1.6mm HEX NUTS, 304 SS • 304L SS A351-CF3
SERV:
A312-TP304L, ERW -WP304-W, WLD MFR STD (1/16") THK A194-8
(GO) Gear Lubrication Oil (LP) • 304/304L SS TRIM(S):
(GG) Grease (LP) A182-F304/F304L, ===============
(HY) Hydraulic Oil (LP) B16.5 • API 602 TRIM 8
(LO) Lube Oil Supply (LP) ST
(LR) Lube Oil Return (LP) • API 594 TRIM 12
(WE) Waste Effluent/Chemical
Waste
(EA) Exhaust Air
SME0L DES: ASME B31.3 NPS 0.5 - 2 CLASS 3000 0.0" • 304L SS • 304L SS A403 • 304L SS No Gaskets in PMC No Bolts in PMC No Valves in PMC
1 3000 psig @ 38 C RING JOINT A312-TP304L, SMLS -WP304L-S, SMLS A182-F304L, SAE
3000 psig @ 38 C CODE 61
SERV:
(HP) Hydraulic Oil (MP)
(LM) Lubrication Oil (MP)
SPE0L DES: ASME B31.3 NPS 0.5 - 2 CLASS 6000 0.0 • 304L SS • 304L SS A403 • 304L SS No Gaskets in PMC No Bolts in PMC No Valves in PMC
1 6000 psig @ 38 C RING JOINT A312-TP304L, SMLS -WP304L-S, SMLS A182-F304L, SAE
6000 psig @ 38 C CODE 62
SERV:
(HG) Grease (HP)
(HO) Hydraulic Oil (HP)
CRAMIREZ
COLLAHUASI
VÁLVULAS
PRÓXIMA
REVISIÓN
Generado: CAC
Aprobado: MAV
11 ANEXO 4: HOJAS DE CLASES Y SERVICIOS
COMPANIA MINERA DONA INES DE COLLAHUASI Piping Material Class Page: 2 of 8
Job Name: INGENIERÍA DE DETALLES Y COMPRAS Class: C1E2A Date: 26-Sep-22
5TO MOLINO DE BOLAS
Job No: 26418 Revision: 1
Piping Design Code: ASME B31.3 - CAT D Piping Material: ASTM A53-B/API 5L-B
Design For Vacuum: NO Flange Material: ASTM A105 / A36
Corrosion Allowance: 0.0625" (1.6mm) Gasket Material: ARAMID FIBER NBR 1/16"-1/8" THK
Flange Class: CLASS 150 Bolt Material: CR-MO A193-B7
Flange Facing: RAISED FACE Valve Material: CS A216/CI A126B/B 584
Sour Service: -- Valve Trim: STAINLESS STEEL
Heat Treatment: --
NDE: PER ASME B31.3
Leak Test: SEE PROJECT LINE LIST
Service(s)
AP Plant Air NG Nitrogen WC Cooling Water
WG Gland Seal Water WM Reclaim Water WP Process Water
WR Make-Up Water (Fresh) DC Carbon Dioxide WT Treated Water
Pressure-Temperature Limits
Temperature, Pressure, psig
C Default Calculated Wall
Not Required
NPS: 0.5 - 48
-29 150
38 150
Default Schedule/Thickness Table

NPS 0.5 0.75 1 1.5 2 3 4 6 8 10 12 14 16 18 20 22 24 26 28 30
OD (in) 0.840 1.050 1.315 1.900 2.375 3.500 4.500 6.625 8.625 10.750 12.750 14.000 16.000 18.000 20.000 22.000 24.000 26.000 28.000 30.000
SCHEDULE 80 80 80 80 80 STD STD STD STD STD STD STD STD STD STD STD STD -- -- --
W.T. (in) 0.147 0.154 0.179 0.200 0.218 0.216 0.237 0.280 0.322 0.365 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375
NPS 32 34 36 38 40 42 44 46 48
OD (in) 32.000 34.000 36.000 38.000 40.000 42.000 44.000 46.000 48.000
SCHEDULE -- -- -- -- -- -- -- -- --
W.T. (in) 0.375 0.375 0.375 0.375 0.375 0.500 0.500 0.500 0.500
Calculated Wall Schedule/Thickness Table
General Notes
0700 Plant air test service will be replaced by a containment air test at operating pressure. Leak test before putting into service.
1043 Use only in valves with connection UNC thread
1145 All threaded connections to be cleaned then primed with Loctite Primer N or T (for standard anaerobic materials) prior to application of
any sealant.
1146 Do not apply primer or sealant to the first three threads of any connection.
1214 Use Silent Check Valve type only in pumps discharge when shown on P&ID.
1472 Stub-Ins and Reinforcing Pads must be full penetration weld according to ASME B31.3 paragraph 328.5.4, Figure 328.5.4D (2) y (4).
1475 For fluid service detail see piping material class ANNEX 2 Fluid Codes Table
1476 For Lug Valves, stud bolts must be used including two nuts at each side of valve
1478 Heat treatment shall be performed if the total wall thickness through one section is equal or higher than 1 inch (25.4 mm).
1550 All underground piping, pipes and the fittings, must be Polyethylene Exterior coated conforming to Specification N°: 172-I1909E-000-46-
ES-0006 (26418-220-3PS-P000-00006).
Notes for Specific Bechtel Component Type(s) and Stock Code Sizes
121824 HIGHEST
Bechtel Confidential - Set in D.20.11 - CNF_FOOTER Run Date: 23-SEP-2022 07:27:30
119922 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
Rev Size Range - NPS Stock Code Short Description Bechtel Stock Code Client Code Option Note No.
PIPE
Pipe
0.5 2 PIPE, CS A53-B TYPE S, SMLS, ENPT, SCH 80, B36.10M, PPPCDFSMM310B7S1
SNGL RANDOM LGTHS
2.5 24 PIPE, CS A53-B TYPE E, ERW, BE, STD, B36.10M, DBL PPPCDDERBESTB7D1
RANDOM LGTHS
26 40 PIPE, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, BE, PPPC1DE2BE2EB7D1
9.53mm (0.375") NOM. WT, B36.10M, DBL RANDOM LGTHS
42 48 PIPE, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, BE, PPPC1DE2BE2HB7D1
2.5 24 PIPE, CS A53-B TYPE E, ERW, BE x PE, STD, B36.10M, DBL PPPCDDERBPSTB7D1 2
1 RANDOM LGTHS
26 40 PIPE, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, BE x PE, PPPC1DE2BP2EB7D1 2
1
42 48 PIPE, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, BE x PE, PPPC1DE2BP2HB7D1 2
1
2.5 24 PIPE, CS A53-B TYPE E, ERW, PE, STD, B36.10M, DBL PPPCDDERPESTB7D1 3
1 RANDOM LGTHS
26 40 PIPE, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, PE, PPPC1DE2PE2EB7D1 3
1 9.53mm (0.375") NOM. WT, B36.10M, DBL RANDOM LGTHS
42 48 PIPE, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, PE, PPPC1DE2PE2HB7D1 3
1
NIPPLES / SWAGES
Concentric Swaged Nipple
2.5 4 0.5 2 SWG-CON, CS A234-WPB, SMLS, BE x ENPT, STD x SCH 80, PNCCFGSMBMST10M9
SP-95
Eccentric Swaged Nipple
2.5 4 0.5 2 SWG-ECC, CS A234-WPB, SMLS, BE x ENPT, STD x SCH 80, PNECFGSMBMST10M9
SP-95
FITTINGS
Coupling
0.5 2 CPLG, MI A197, INPT, CL300, B16.3 PCPFERTF30B30000
Reducing Coupling
0.75 2 0.5 1.5 RED CPLG, MI A197, INPT, CL300, B16.3 PR2FERTF30B30000
Union
0.5 2 UN, MI A197, INPT, CL300, B16.39 PUNFERTF30BT0000
Cap
0.5 2 CAP, MI A197, INPT, CL300, B16.3 PCAFERTF30B30000
2.5 24 CAP, CS A234-WPB, SMLS, BE, STD, B16.9 PCACFGSMBESTB900
26 42 CAP, CS A234-WPB, SMLS, BE, 9.53mm (0.375") NOM. WT, PCACFGSMBE2EB900
B16.9
45 Degree Elbow
0.5 2 EL-45, MI A197, INPT, CL300, B16.3 P4EFERTF30B30000
45 Degree LR Elbow
2.5 24 EL-45 LR, CS A234-WPB, WLD, BE, STD, B16.9 P4LCFGWDBESTB900
26 40 EL-45 LR, CS A234-WPB, WLD, BE, 9.53mm (0.375") NOM. WT, P4LCFGWDBE2EB900
B16.9
42 48 EL-45 LR, CS A234-WPB, WLD, BE, 12.70mm (0.500") NOM. P4LCFGWDBE2HB900
WT, B16.9
90 Degree Elbow
90 Degree LR Elbow
26 40 EL-90 LR, CS A234-WPB, WLD, BE, 9.53mm (0.375") NOM. WT, P9LCFGWDBE2EB900
B16.9
42 48 EL-90 LR, CS A234-WPB, WLD, BE, 12.70mm (0.500") NOM. P9LCFGWDBE2HB900
WT, B16.9
Tee
0.5 2 TEE, MI A197, INPT, CL300, B16.3 PTEFERTF30B30000
2.5 24 TEE, CS A234-WPB, WLD, BE, STD, B16.9 PTECFGWDBESTB900
26 40 TEE, CS A234-WPB, WLD, BE, 9.53mm (0.375") NOM. WT, PTECFGWDBE2EB900
B16.9
42 48 TEE, CS A234-WPB, WLD, BE, 12.70mm (0.500") NOM. WT, PTECFGWDBE2HB900
B16.9
Reducing Tee
0.75 2 0.5 1.5 RED TEE, MI A197, INPT, CL300, B16.3 PRTFERTF30B30000
3 24 2.5 22 RED TEE, CS A234-WPB, WLD, BE, STD x STD, B16.9 PRTCFGWDBESTSTB9
26 40 10 24 RED TEE, CS A234-WPB, WLD, BE, 9.53mm (0.375") NOM. WT PRTCFGWDBE2ESTB9
x STD, B16.9
121824 HIGHEST
119922 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
FITTINGS
Reducing Tee
28 40 26 38 RED TEE, CS A234-WPB, WLD, BE, 9.53mm (0.375") NOM. WT PRTCFGWDBE2E2EB9
x 9.53mm (0.375") NOM. WT, B16.9
42 48 16 24 RED TEE, CS A234-WPB, WLD, BE, 12.70mm (0.500") NOM. PRTCFGWDBE2HSTB9
WT x STD, B16.9
42 48 26 40 RED TEE, CS A234-WPB, WLD, BE, 12.70mm (0.500") NOM. PRTCFGWDBE2H2EB9
WT x 9.53mm (0.375") NOM. WT, B16.9
44 48 42 46 RED TEE, CS A234-WPB, WLD, BE, 12.70mm (0.500") NOM. PRTCFGWDBE2H2HB9
WT x 12.70mm (0.500") NOM. WT, B16.9
Concentric Reducer
3 24 2.5 22 RED CON, CS A234-WPB, WLD, BE, STD x STD, B16.9 PRCCFGWDBESTSTB9
26 40 18 24 RED CON, CS A234-WPB, WLD, BE, 9.53mm (0.375") NOM. PRCCFGWDBE2ESTB9
WT x STD, B16.9
28 40 26 38 RED CON, CS A234-WPB, WLD, BE, 9.53mm (0.375") NOM. PRCCFGWDBE2E2EB9
WT x 9.53mm (0.375") NOM. WT, B16.9
42 48 30 40 RED CON, CS A234-WPB, WLD, BE, 12.70mm (0.500") NOM. PRCCFGWDBE2H2EB9
WT x 9.53mm (0.375") NOM. WT, B16.9
44 48 42 46 RED CON, CS A234-WPB, WLD, BE, 12.70mm (0.500") NOM. PRCCFGWDBE2H2HB9
WT x 12.70mm (0.500") NOM. WT, B16.9
Eccentric Reducer
3 24 2.5 22 RED ECC, CS A234-WPB, WLD, BE, STD x STD, B16.9 PRECFGWDBESTSTB9
26 40 18 24 RED ECC, CS A234-WPB, WLD, BE, 9.53mm (0.375") NOM. PRECFGWDBE2ESTB9
WT x STD, B16.9
28 40 26 38 RED ECC, CS A234-WPB, WLD, BE, 9.53mm (0.375") NOM. PRECFGWDBE2E2EB9
WT x 9.53mm (0.375") NOM. WT, B16.9
42 48 30 40 RED ECC, CS A234-WPB, WLD, BE, 12.70mm (0.500") NOM. PRECFGWDBE2H2EB9
WT x 9.53mm (0.375") NOM. WT, B16.9
44 48 42 46 RED ECC, CS A234-WPB, WLD, BE, 12.70mm (0.500") NOM. PRECFGWDBE2H2HB9
WT x 12.70mm (0.500") NOM. WT, B16.9
INTEGRALLY REINFORCED BRANCH OUTLET FITTINGS
Thredolet
2.5 48 0.5 2 THREDOLET, CS A105, CL3000, INPT, B16.11, HDR/BRN, SP- PLTCDKK30000T101
97
FLANGES
Threaded Flange
0.5 2 FLG-THD, CS A105, CL150, RF, B16.5 PFTCDK15RF00B500
0.5 2 FLG-THD, CS A105, CL150, FF, B16.5 PFTCDK15FF00B500 2
Slip On Flange
2.5 24 FLG-SLP ON, CS A105, CL150, RF, B16.5 PFPCDK15RF00B500
26 48 FLG-SLP ON, CS A36, CL. D, FF, AWWA C207 PFPCD1CDFF00WJ00
2.5 24 FLG-SLP ON, CS A105, CL150, FF, B16.5 PFPCDK15FF00B500 2
Weld Neck Flange
1 42 48 FLG-WN, CS A105, CL150, RF, 12.70mm (0.500") NOM. WT, PFWCDK15RF2HBV00
B16.47-A
1 26 40 FLG-WN, CS A105, CL150, RF, STD, B16.47-A PFWCDK15RFSTBV00 2
Blind Flange
0.5 24 FLG-BLND, CS A105, CL150, RF, B16.5 PFBCDK15RF00B500
1 26 48 FLG-BLND, CS A36, CL. D, FF, AWWA C207 PFBCD1CDFF00WJ00
0.5 24 FLG-BLND, CS A105, CL150, FF, B16.5 PFBCDK15FF00B500 2
1 26 48 FLG-BLND, CS A105, CL150, RF, B16.47-A PFBCDK15RF00BV00 2
GASKETS
Gasket
0.5 12 GASKET, ARAMID W/ NBR (BUNA-N) BINDER, FLAT RING, PGGGMGFR6115B5GB
1.6mm (1/16") THK, CL150, B16.5, B16.21, BLUE-GARD 3000
14 24 GASKET, ARAMID W/ NBR (BUNA-N) BINDER, FLAT RING, PGGGMGFR8115B5GB
26 48 GASKET, ARAMID W/ NBR (BUNA-N) BINDER, FULL FACE, PGGGMGFF81CDCDGB
3.2mm (1/8") THK, CL. D, AWWA C207 CL. D, B16.21, BLUE-
GARD 3000
0.5 12 GASKET, ARAMID W/ NBR (BUNA-N) BINDER, FULL FACE, PGGGMGFF6115B5GB 2
14 24 GASKET, ARAMID W/ NBR (BUNA-N) BINDER, FULL FACE, PGGGMGFF8115B5GB 2
26 48 GASKET, ARAMID W/ NBR (BUNA-N) BINDER, FLAT RING, PGGGMGFR8115BNGB 2
3.2mm (1/8") THK, CL150, B16.47-A, B16.21, BLUE-GARD 3000
BOLTS
Continuous Thread Stud Bolt
0.5 1 1 35 BLT-STUD, CR-1/5 MO A193-B7M, W/ 2 HVY HEX NUTS, CS PB1JC5C2LAY00001
A194-2H, 2 WSHRS, F436-1, B1.1, UNC, DIA (IMP) x LEN (IMP)
121824 HIGHEST
119922 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
BOLTS
1 1.125 2 3 44.25 BLT-STUD, CR-1/5 MO A193-B7M, W/ 2 HVY HEX NUTS, CS PB1JC5C2LAX00001
A194-2H, 2 WSHRS, F436-1, B1.1, 8-UN, DIA (IMP) x LEN
(IMP)
VALVES
Gate Valve
3 8 VLV-GT, CI A126-B, CL125, FF, B16.1, B16.10, SP-70, OS&Y, PVGFCV12FFA38AFE
BB, SLD WDG, BRZ TRIM, HW, NON-ASB
Knife Gate Valve
3 8 VLV-KNFGT, CS A216-WCB, 10.3 BARG (150 PSIG) CWP, RF, PVKCFBW1RFA00A07
B16.5, SP-81, TAPPED FULL FLG WAFER STYLE, SP-81,
OS&Y, RS, BL, FULL PORT, SLD GATE, 316 SS GATE AND
STEM, METAL ST, PTFE PKG, HW, NON-ASB
STEM, METAL ST, PTFE PKG, GO, NON-ASB
1 26 38 VLV-KNFGT, CS A216-WCB, 10.3 BARG (150 PSIG) CWP, RF, PVKCFBW1RFA06A08
B16.47-A, SP-81, TAPPED FULL FLG WAFER STYLE, SP-81,
Globe Valve
0.5 2 VLV-GLB, CS A105, CL800, INPT, B16.11, MFR STD, T-BODY, PVLCDK80TFC01BH2
API 602, OS&Y, BB, STD PORT, CONICAL DISC, API 602 TRIM
8, CI FG PKG W/ ANTI-EXTR, API 602 BOLTING, HW, NON-
ASB
3 6 VLV-GLB, CS A216-WCB, CL150, RF, B16.5, B16.10, T-BODY, PVLCFB15RFAA5CQ2
B16.34, OS&Y, BB, STD PORT, CONICAL DISC, API 623 TRIM
ASB
16, CI FG PKG W/ ANTI-EXTR, API 623 BOLTING, GO, NON-
ASB
Check Valve
0.5 2 VLV-CHK, CS A105N, CL800, INPT, B16.11, MFR STD, SWING, PVCCDL80TFC02A07
API 602, BC, STD PORT, API 602 TRIM 8, API 602 BOLTING,
NON-ASB
3 24 VLV-CHK, CS A216-WCB, CL150, RF, B16.5, B16.10, SWING, PVCCFB15RFAA29J2
API 594, BC, API 594 TRIM 10, MFR STD BOLTS, NON-ASB
30 48 VLV-CHK, CS A216-WCB, CL150, RF, B16.47-A, API 594 TYPE PVCCFB15RFA2YA5V
A DIMS, DUAL PLT, WFR, API 594 (R/L), WITH INCONEL X-
750 SPRING, API 594 TRIM 5, H OR V UP, NON-ASB
3 16 VLV-CHK, CS A216-WCB, CL150, RF, B16.5, B16.10, PISTON, PVCCFB15RFA4DAFN 2
MFR, STD PORT, WITH MFR STD SPRING, 13CR SS TRIM, H
OR V UP, SP WD GSK 316L-FG, B7/2H, DFT EXCALIBUR OR
EQUAL
Ball Valve
0.5 2 VLV-BALL, BRS B584-C84400, 600 CWP, INPT, B1.20.1, MFR PVBBBNWFTF002A08
STD, 1-PC, FLOATING, SP-110, RED PORT, 316 SS TRIM,
RTFE ST, PTFE PKG, LO W/ LOCK, NON-ASB
2.5 3 VLV-BALL, CS A216-WCB, CL150, RF, B16.5, B16.10 LONG, PVBCFB15RFAL1A7D
SPLIT BODY, FLOATING, API 608, BI-DIR, FULL PORT, 316
SS TRIM, PTFE ST, FG GSK, FIRE-TESTED API 607, LO W/
LOCK, NON-ASB
Butterfly Valve
3 10 VLV-BFLY, CS A216-WCB, CL150, RF, B16.5, API 609 CAT B PVFCFB15RFA56A40
DIMS, THRU DRILLED LUG, API 609 CAT. B, DBL OFFSET,
316 SS DISC, RTFE ST, 17-4 PH SS STEM, FIRE-TESTED API
607, LO, NON-ASB
607, GO, NON-ASB
121824 HIGHEST
119922 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
90 Main Branch C1E2A
H 0.5 TE
E
A 0.75 RT TE
D
E 1 RT RT TE
R
1.5 RT RT RT TE
2 LT LT LT LT TE
3 LT LT LT LT RT TE
4 LT LT LT LT LT RT TE
6 LT LT LT LT LT ZS RT TE
8 LT LT LT LT LT ZS ZS RT TE
10 LT LT LT LT LT ZS ZP ZP RT TE
12 LT LT LT LT LT ZS ZS ZP ZP RT TE
14 LT LT LT LT LT ZS ZS ZS ZP ZP RT TE
16 LT LT LT LT LT ZS ZS ZS ZS ZP ZP RT TE
18 LT LT LT LT LT ZS ZS ZS ZS ZS ZP ZP RT TE
20 LT LT LT LT LT ZS ZS ZS ZS ZS ZS ZP ZP RT TE
22 LT LT LT LT LT ZS ZS ZS ZS ZS ZS ZS ZP ZP RT TE
24 LT LT LT LT LT ZS ZS ZS ZS ZS ZS ZS ZS ZP ZP RT TE
26 LT LT LT LT LT ZS ZS ZS ZS ZS ZS ZS ZS ZS ZP ZP RT TE
28 LT LT LT LT LT ZS ZS ZS ZS ZS ZS ZS ZS ZS ZS ZP ZP RT TE
30 LT LT LT LT LT ZS ZS ZS ZS ZS ZS ZS ZS ZP ZP ZP ZP ZP RT TE
32 LT LT LT LT LT ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP RT TE
34 LT LT LT LT LT ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP RT TE
36 LT LT LT LT LT ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP RT TE
38 LT LT LT LT LT ZP ZP ZP ZP ZP ZP ZP ZP RT RT RT RT ZP RT RT RT RT RT TE
40 LT LT LT LT LT ZP ZP ZP ZP ZP ZP ZP ZP ZP RT RT RT RT RT RT RT RT RT RT
42 LT LT LT LT LT ZP ZP ZP ZP ZP ZP ZP ZP ZP RT RT RT RT RT RT RT RT RT RT
44 LT LT LT LT LT ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP RT RT RT RT RT RT RT RT RT
46 LT LT LT LT LT ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP RT RT RT RT RT RT RT RT
48 LT LT LT LT LT ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP ZP RT RT RT RT RT RT RT ZP
0.5 0.75 1 1.5 2 3 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38
121824 HIGHEST
119922 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
0.5
0.75
1.5
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40 TE
42 RT TE
44 RT RT TE
46 RT RT RT TE
48 RT RT RT RT TE
40 42 44 46 48
BRANCH (NPS)
121824 HIGHEST
119922 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
Legend
LT INTEGRALLY REINF. BRANCH FITTING - THREDOLET OR EQUAL
RT REDUCING TEE
TE TEE
ZP REINFORCING PAD
ZS STUB-IN
121824 HIGHEST
119922 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
Job Name: INGENIERÍA DE DETALLES Y COMPRAS Class: C1E2B Date: 26-Sep-22
5TO MOLINO DE BOLAS
Piping Design Code: ASME B31.3 Piping Material: ASTM A53-B

Design For Vacuum: NO Flange Material: ASTM A105
Corrosion Allowance: 0.0625" (1.6mm) Gasket Material: ARAMID FIBER PTFE 1/16" THK
Flange Facing: RAISED FACE Valve Material: ASTM A216 WCB/A105
Heat Treatment: --
NDE: PER ASME B31.3
Service(s)
CL1 Primary Collector CL2 Secondary Collector (Xanthate) FL Flocculant
FO Fuel Oil FR Frother (Mixture) WE Waste Effluent/Chemical Waste
OD Oil Drain TR Test Reagent
Not Required
NPS: 0.5 - 24
-29 150
38 150

NPS 0.5 0.75 1 1.5 2 3 4 6 8 10 12 14 16 18 20 24
OD (in) 0.840 1.050 1.315 1.900 2.375 3.500 4.500 6.625 8.625 10.750 12.750 14.000 16.000 18.000 20.000 24.000
SCHEDULE 80 80 80 80 80 STD STD STD STD STD STD STD STD STD STD STD
W.T. (in) 0.147 0.154 0.179 0.200 0.218 0.216 0.237 0.280 0.322 0.365 0.375 0.375 0.375 0.375 0.375 0.375
General Notes
119682 HIGHEST
119626 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
PIPE
Pipe
0.5 2 PIPE, CS A53-B TYPE S, SMLS, PE, SCH 80, B36.10M, SNGL PPPCDFSMPE10B7S1
RANDOM LGTHS
RANDOM LGTHS
1 0.5 2 PIPE, CS A53-B TYPE S, SMLS, BE x PE, SCH 80, B36.10M, PPPCDFSMBP10B7S1 2
SNGL RANDOM LGTHS
1 2.5 24 PIPE, CS A53-B TYPE E, ERW, BE x PE, STD, B36.10M, DBL PPPCDDERBPSTB7D1 2
RANDOM LGTHS
1 2.5 24 PIPE, CS A53-B TYPE E, ERW, PE, STD, B36.10M, DBL PPPCDDERPESTB7D1 3
RANDOM LGTHS
FITTINGS
Coupling
0.5 2 CPLG, CS A105, SW, CL3000, B16.11 PCPCDKSWK3BH0000
Reducing Coupling
0.75 2 0.5 1.5 RED CPLG, CS A105, SW, CL3000, B16.11 PR2CDKSWK3BH0000
Union
1 0.5 2 UN, CS A105, SW, CL3000, SP-83 PUNCDKSWK3SJ0000
Cap
0.5 2 CAP, CS A105, SW, CL3000, B16.11 PCACDKSWK3BH0000
45 Degree Elbow
0.5 2 EL-45, CS A105, SW, CL3000, B16.11 P4ECDKSWK3BH0000
45 Degree LR Elbow
90 Degree Elbow
0.5 2 EL-90, CS A105, SW, CL3000, B16.11 P9ECDKSWK3BH0000
90 Degree LR Elbow
3 24 EL-90 LR, CS A234-WPB, WLD, BE, STD, B16.9 P9LCFGWDBESTB900
Tee
0.5 2 TEE, CS A105, SW, CL3000, B16.11 PTECDKSWK3BH0000
Reducing Tee
0.75 2 0.5 1.5 RED TEE, CS A105, SW, CL3000, B16.11 PRTCDKSWK3BH0000
1 3 3 1.5 2 RED TEE, CS A234-WPB, WLD, BE, STD x SCH 80, B16.9 PRTCFGWDBEST10B9
4 24 3 20 RED TEE, CS A234-WPB, WLD, BE, STD x STD, B16.9 PRTCFGWDBESTSTB9
Concentric Reducer
1 3 3 1.5 2 RED CON, CS A234-WPB, WLD, BE, STD x SCH 80, B16.9 PRCCFGWDBEST10B9
1 4 24 3 22 RED CON, CS A234-WPB, WLD, BE, STD x STD, B16.9 PRCCFGWDBESTSTB9
Eccentric Reducer
1 3 3 1.5 2 RED ECC, CS A234-WPB, WLD, BE, STD x SCH 80, B16.9 PRECFGWDBEST10B9
1 4 24 3 22 RED ECC, CS A234-WPB, WLD, BE, STD x STD, B16.9 PRECFGWDBESTSTB9
Sockolet
2.5 24 0.5 2 SOCKOLET, CS A105, CL3000, SW, B16.11, HDR/BRN, SP-97 PLSCDKK30000S101
FLANGES
Socket Weld Flange
0.5 2 FLG-SW, CS A105, CL150, RF, SCH 80, B16.5 PFSCDK15RF10B500
Slip On Flange
Blind Flange
GASKETS
Gasket
BOLTS
1 0.5 1 1 35 BLT-STUD, CR-1/5 MO A193-B7M, W/ 2 HVY HEX NUTS, CS PB1JC5C2LAY00001
1 1.125 1.25 3 38.75 BLT-STUD, CR-1/5 MO A193-B7M, W/ 2 HVY HEX NUTS, CS PB1JC5C2LAX00001
(IMP)
VALVES
Globe Valve
119682 HIGHEST
119626 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
VALVES
Globe Valve
0.5 2 VLV-GLB, CS A105, CL800, SW, B16.11, MFR STD, T-BODY, PVLCDK80SWCP1A84
B16.34, OS&Y, BB, STD PORT, PLUG TYPE DISC, API 602
TRIM 11, MFR PKG, HW
3 14 VLV-GLB, CS A216-WCB, CL150, RF, B16.5, B16.10, T-BODY, PVLCFB15RFAA5A84
B16.34, OS&Y, BB, STD PORT, PLUG TYPE DISC, API 602
TRIM 11, MFR PKG, HW
Check Valve
0.5 2 VLV-CHK, CS A105N, CL800, SW, B16.11, MFR STD, SWING, PVCCDL80SWC02A07
NON-ASB
3 24 VLV-CHK, CS A216-WCB, CL150, RF, B16.5, B16.10, SWING, PVCCFB15RFAA29L2
3 16 VLV-CHK, CS A216-WCB, CL150, RF, B16.5, B16.10, PISTON, PVCCFB15RFA4DAFN 2
MFR, STD PORT, WITH MFR STD SPRING, 13CR SS TRIM, H
OR V UP, SP WD GSK 316L-FG, B7/2H, DFT EXCALIBUR OR
EQUAL
Ball Valve
0.5 6 VLV-BALL, CS A216-WCB, CL150, RF, B16.5, B16.10 LONG, PVBCFB15RFAL1A7J
SS TRIM, RTFE ST, RTFE SEALS, FIRE-TESTED API 607, LO
W/ LOCK, NON-ASB
0.5 2 VLV-BALL, CS A216-WCB, CL1500, SW, B16.11, MFR STD, PVBCFBK1SWC05A7J
TOP ENTRY, FLOATING, B16.34, AS, BI-DIR, FULL PORT, 316
W/ LOCK, NON-ASB
0.5 6 VLV-BALL, CS A216-WCB, CL150, RF, B16.5, B16.10 LONG, PVBCFB15RFAL1A7J 2
W/ LOCK, NON-ASB
119682 HIGHEST
119626 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
90 Main Branch C1E2B
H 0.5 TE
E
A 0.75 RT TE
D
E 1 RT RT TE
R
1.5 RT RT RT TE
2 LS LS LS LS TE
3 LS LS LS LS RT TE
4 LS LS LS LS ZS RT TE
6 LS LS LS LS ZS ZS RT TE
8 LS LS LS LS ZS ZS ZS RT TE
10 LS LS LS LS ZS ZS ZS ZS RT TE
12 LS LS LS LS ZS ZS ZS ZS ZS RT TE
14 LS LS LS LS ZS ZS ZS ZS ZS ZS RT TE
16 LS LS LS LS ZS ZS ZS ZS ZS ZS ZS RT TE
18 LS LS LS LS ZS ZS ZS ZS ZS ZS ZS ZS RT TE
20 LS LS LS LS ZS ZS ZS ZS ZS ZS ZS ZS ZS RT TE
24 LS LS LS LS LW LW LW LW LW LW LW ZP ZP ZP RT TE
0.5 0.75 1 1.5 2 3 4 6 8 10 12 14 16 18 20 24
BRANCH (NPS)
Legend
LS INTEGRALLY REINF. BRANCH FITTING - SOCKOLET OR EQUAL
LW INTEGRALLY REINF. BRANCH FITTING - WELDOLET OR EQUAL
RT REDUCING TEE
TE TEE
ZP REINFORCING PAD
ZS STUB-IN
119682 HIGHEST
119626 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
Job Name: INGENIERÍA DE DETALLES Y COMPRAS Class: C1E2R Date: 26-Sep-22
5TO MOLINO DE BOLAS
Piping Design Code: ASME B31.3 - CAT D Piping Material: ASTM A53-B/API 5L-B
Design For Vacuum: NO Gasket Material: ARAMID FIBER NBR 1/16"-1/8" THK
Corrosion Allowance: 0.0625" (1.6mm) Bolt Material: CR-MO A193-B7
Flange Class: CLASS 150 Valve Material: ASTM A216 WCB/A105
Flange Facing: FLAT FACE Valve Trim: STAINLESS STEEL
Sour Service: --
Heat Treatment: --
NDE: PER ASME B31.3
Service(s)
CT Concentrate (Copper) SL Slurry ML Milk of Lime
TL Final Tailings PD Process Drains
Not Required
NPS: 0.5 - 48
-20 100
38 100
50 100

NPS 0.5 0.75 1 1.25 1.5 2 2.5 3 4 6 8 10 12 14 16 18 20 24 26 28
OD (in) 0.840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.500 6.625 8.625 10.750 12.750 14.000 16.000 18.000 20.000 24.000 26.000 28.000
SCHEDULE 80 80 80 80 80 80 STD STD STD STD STD STD STD STD STD STD STD STD -- --
W.T. (in) 0.147 0.154 0.179 0.191 0.200 0.218 0.203 0.216 0.237 0.280 0.322 0.365 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375
NPS 30 32 34 36 38 40 42 44 46 48
OD (in) 30.000 32.000 34.000 36.000 38.000 40.000 42.000 44.000 46.000 48.000
SCHEDULE -- -- -- -- -- -- -- -- -- --
W.T. (in) 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375
General Notes
any sealant.
125424 HIGHEST
118584 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
PIPE
Pipe
0.5 2 PIPE, CS A53-B TYPE S, SMLS, ENPT, SCH 80, B36.10M, PPPCDFSMM310B7S1
SNGL RANDOM LGTHS
RANDOM LGTHS
0.5 2 PIPE, CS A53-B TYPE S, SMLS, BE, SCH 80, B36.10M, SNGL PPPCDFSMBE10B7S1 2
RANDOM LGTHS
RANDOM LGTHS
0.5 2 PIPE, CS A53-B TYPE S, SMLS, PE, SCH 80, B36.10M, SNGL PPPCDFSMPE10B7S1 3
RANDOM LGTHS
RANDOM LGTHS
NIPPLES / SWAGES
2.5 4 0.5 2 SWG-CON, CS A234-WPB, SMLS, BE x ENPT, STD x SCH 80, PNCCFGSMBMST10M9
SP-95
2.5 4 0.5 2 SWG-ECC, CS A234-WPB, SMLS, BE x ENPT, STD x SCH 80, PNECFGSMBMST10M9
SP-95
FITTINGS
Coupling
0.5 2 CPLG, MI A197, INPT, CL300, B16.3 PCPFERTF30B30000
Reducing Coupling
0.75 2 0.5 1.5 RED CPLG, MI A197, INPT, CL300, B16.3 PR2FERTF30B30000
Union
0.5 2 UN, MI A197, INPT, CL300, B16.39 PUNFERTF30BT0000
Cap
0.5 2 CAP, MI A197, INPT, CL300, B16.3 PCAFERTF30B30000
B16.9
45 Degree Elbow
1 0.5 2 EL-45, MI A197, INPT, CL300, B16.3 P4EFERTF30B30000 3
45 Degree LR Elbow
1 2.5 24 EL-45 LR, CS A234-WPB, WLD, BE, STD, B16.9 P4LCFGWDBESTB900 3
1 26 48 EL-45 LR, CS A234-WPB, WLD, BE, 9.53mm (0.375") NOM. WT, P4LCFGWDBE2EB900 3
B16.9
45 Degree Bend
2 2 EL-45 BND, CS A53-B TYPE S, SMLS, BE, SCH 80, B16.9, 3D, P4BCDFSMBE10B9BX
W/O TAN, PFI ES-24
1 2.5 24 EL-45 BND, CS A53-B TYPE E, ERW, BE, STD, B16.9, 3D, W/O P4BCDDERBESTB9BX
TAN, PFI ES-24
1 26 48 EL-45 BND, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, BE, P4BC1DE2BE2EB9BX
9.53mm (0.375") NOM. WT, B16.9, 3D, W/O TAN, PFI ES-24
2 2 EL-45 BND, CS A53-B TYPE S, SMLS, BE, SCH 80, B16.9, 5D, P4BCDFSMBE10B9BV 2
W/O TAN, PFI ES-24
1 2.5 24 EL-45 BND, CS A53-B TYPE E, ERW, BE, STD, B16.9, 5D, W/O P4BCDDERBESTB9BV 2
TAN, PFI ES-24
1 26 48 EL-45 BND, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, BE, P4BC1DE2BE2EB9BV 2
90 Degree Elbow
1 0.5 2 EL-90, MI A197, INPT, CL300, B16.3 P9EFERTF30B30000 3
90 Degree LR Elbow
1 2.5 24 EL-90 LR, CS A234-WPB, WLD, BE, STD, B16.9 P9LCFGWDBESTB900 3
1 26 48 EL-90 LR, CS A234-WPB, WLD, BE, 9.53mm (0.375") NOM. WT, P9LCFGWDBE2EB900 3
B16.9
90 Degree Bend
1 2 2 EL-90 BND, CS A53-B TYPE S, SMLS, BE, SCH 80, B16.9, 3D, P9BCDFSMBE10B9BX
W/O TAN, PFI ES-24
125424 HIGHEST
118584 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
FITTINGS
90 Degree Bend
1 2.5 24 EL-90 BND, CS A53-B TYPE E, ERW, BE, STD, B16.9, 3D, W/O P9BCDDERBESTB9BX
TAN, PFI ES-24
1 26 48 EL-90 BND, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, BE, P9BC1DE2BE2EB9BX
1 2 2 EL-90 BND, CS A53-B TYPE S, SMLS, BE, SCH 80, B16.9, 5D, P9BCDFSMBE10B9BV 2
W/O TAN, PFI ES-24
1 2.5 24 EL-90 BND, CS A53-B TYPE E, ERW, BE, STD, B16.9, 5D, W/O P9BCDDERBESTB9BV 2
TAN, PFI ES-24
1 26 48 EL-90 BND, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, BE, P9BC1DE2BE2EB9BV 2
Tee
0.5 2 TEE, MI A197, INPT, CL300, B16.3 PTEFERTF30B30000
B16.9
Reducing Tee
0.75 2 0.5 1.5 RED TEE, MI A197, INPT, CL300, B16.3 PRTFERTF30B30000
x STD, B16.9
x 9.53mm (0.375") NOM. WT, B16.9
x STD, B16.9
x 9.53mm (0.375") NOM. WT, B16.9
x 9.53mm (0.375") NOM. WT, B16.9
Concentric Reducer
WT x STD, B16.9
WT x 9.53mm (0.375") NOM. WT, B16.9
WT x 9.53mm (0.375") NOM. WT, B16.9
WT x 9.53mm (0.375") NOM. WT, B16.9
Eccentric Reducer
WT x STD, B16.9
WT x 9.53mm (0.375") NOM. WT, B16.9
WT x 9.53mm (0.375") NOM. WT, B16.9
WT x 9.53mm (0.375") NOM. WT, B16.9
Thredolet
97
FLANGES
Threaded Flange
0.5 2 FLG-THD, CS A105, CL150, RF, B16.5 PFTCDK15RF00B500
0.5 2 FLG-THD, CS A105, CL150, FF, B16.5 PFTCDK15FF00B500 2
Slip On Flange
Blind Flange
1 26 48 FLG-BLND, CS A36, CL. D, FF, AWWA C207 PFBCD1CDFF00WJ00
0.5 24 FLG-BLND, CS A105, CL150, FF, B16.5 PFBCDK15FF00B500 2
GASKETS
Gasket
125424 HIGHEST
118584 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
GASKETS
Gasket
GARD 3000
BOLTS
(IMP)
VALVES
Knife Gate Valve
3 6 VLV-KNFGT, DI A536-65-45-12, 100 PSIG, FF, B16.5, MFR PVKFAXP4FFA05A09
STD, DBL FLG, MFR, OS&Y, RS, BB, FULL PORT, SLD GATE,
316 SS GATE AND STEM, NAT. RUB SLEEVE MLD W/STIFF.
RING, MFR PKG, HW, CLARKSON KGA OR EQUAL
8 24 VLV-KNFGT, DI A536-65-45-12, 100 PSIG, FF, B16.5, MFR PVKFAXP4FFA05A0E
RING, MFR PKG, GO, CLARKSON KGA OR EQUAL
Plug Valve
2 2 VLV-PLG, CI A126-B, CL125, FF, B16.5, B16.10 SHORT, NON- PVPFCV12FFA06A04
LUBR, B16.34, BC, FULL PORT, TAPERED PLUG, 316 SS
PLUG/STEM, PTFE SLEEVE, FIRE-TESTED API 607, WO, NON-
ASB
125424 HIGHEST
118584 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
90 Main Branch C1E2R
H 1 TE
E
A 1.5 RT TE
D
E 2 LS LS TE
R
3 LS LS RT TE
4 LS LS LW RT TE
6 LS LS LW ZS RT TE
8 LS LS LW ZS ZS RT ZS
10 LS LS LW ZS ZS ZS RT TE
12 LS LS LW ZS ZS ZS ZS RT ZS
14 LS LS LW ZS ZS ZS ZS ZS RT TE
16 LS LS LW ZS ZS ZS ZS ZS ZS RT TE
18 LS LS LW ZS ZS ZS ZS ZS ZS ZS RT TE
20 LS LS LW ZS ZS ZS ZS ZS ZS ZS ZS RT ZS
22 LS LS LW LW LW LW LW LW LW ZP ZP ZP RT TE
24 LS LS LW LW LW LW LW LW LW ZP ZP ZP RT RT TE
1 1.5 2 3 4 6 8 10 12 14 16 18 20 22 24
BRANCH (NPS)
Legend
RT REDUCING TEE
TE TEE
ZP REINFORCING PAD
ZS STUB-IN
125424 HIGHEST
118584 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
Job Name: INGENIERÍA DE DETALLES Y COMPRAS Class: C1E2V Date: 26-Sep-22
5TO MOLINO DE BOLAS
Piping Design Code: ASME B31.3 Piping Material: ASTM A53-B/API 5L-B
Corrosion Allowance: 0.0625" (1.6mm) Bolt Material: CR-MO A193-B7
Flange Class: CLASS 150 Valve Material: ASTM A216 WCB/A105
Sour Service: --
Heat Treatment: --
NDE: PER ASME B31.3
Service(s)
CT Concentrate (Copper) SL Slurry ML Milk of Lime
TL Final Tailings PD Process Drains
Not Required
NPS: 1 - 48
-20 150
38 150
50 150

NPS 1 1.25 1.5 2 2.5 3 4 6 8 10 12 14 16 18 20 24 26 28 30 32
OD (in) 1.315 1.660 1.900 2.375 2.875 3.500 4.500 6.625 8.625 10.750 12.750 14.000 16.000 18.000 20.000 24.000 26.000 28.000 30.000 32.000
SCHEDULE 80 80 80 80 STD STD STD STD STD STD STD STD STD STD STD STD -- -- -- --
W.T. (in) 0.179 0.191 0.200 0.218 0.203 0.216 0.237 0.280 0.322 0.365 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375
NPS 34 36 38 40 42 44 46 48
OD (in) 34.000 36.000 38.000 40.000 42.000 44.000 46.000 48.000
SCHEDULE -- -- -- -- -- -- -- --
W.T. (in) 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375
General Notes
any sealant.
127182 HIGHEST
CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
PIPE
Pipe
1 2 PIPE, CS A53-B TYPE S, SMLS, BE, SCH 80, B36.10M, SNGL PPPCDFSMBE10B7S1
RANDOM LGTHS
RANDOM LGTHS
1 2 PIPE, CS A53-B TYPE S, SMLS, BE x ENPT, SCH 80, B36.10M, PPPCDFSMBM10B7S1 2
SNGL RANDOM LGTHS
RANDOM LGTHS
1 2 PIPE, CS A53-B TYPE S, SMLS, ENPT, SCH 80, B36.10M, PPPCDFSMM310B7S1 3
SNGL RANDOM LGTHS
RANDOM LGTHS
NIPPLES / SWAGES
2.5 4 1 2 SWG-CON, CS A234-WPB, SMLS, BE x ENPT, STD x SCH 80, PNCCFGSMBMST10M9
SP-95
2.5 4 1 2 SWG-ECC, CS A234-WPB, SMLS, BE x ENPT, STD x SCH 80, PNECFGSMBMST10M9
SP-95
FITTINGS
Coupling
1 2 CPLG, MI A197, INPT, CL300, B16.3 PCPFERTF30B30000
Reducing Coupling
0.75 2 1 1.5 RED CPLG, MI A197, INPT, CL300, B16.3 PR2FERTF30B30000
Union
1 2 UN, MI A197, INPT, CL300, B16.39 PUNFERTF30BT0000
Cap
1 2 CAP, CS A234-WPB, SMLS, BE, SCH 80, B16.9 PCACFGSMBE10B900
B16.9
45 Degree LR Elbow
1 2 EL-45 LR, CS A234-WPB, SMLS, BE, STD, B16.9 P4LCFGSMBESTB900 3
2.5 24 EL-45 LR, CS A234-WPB, WLD, BE, STD, B16.9 P4LCFGWDBESTB900 3
26 48 EL-45 LR, CS A234-WPB, WLD, BE, 9.53mm (0.375") NOM. WT, P4LCFGWDBE2EB900 3
B16.9
45 Degree Bend
W/O TAN, PFI ES-24
2.5 24 EL-45 BND, CS A53-B TYPE E, ERW, BE, STD, B16.9, 3D, W/O P4BCDDERBESTB9BX
TAN, PFI ES-24
26 48 EL-45 BND, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, BE, P4BC1DE2BE2EB9BX
W/O TAN, PFI ES-24
2.5 24 EL-45 BND, CS A53-B TYPE E, ERW, BE, STD, B16.9, 5D, W/O P4BCDDERBESTB9BV 2
TAN, PFI ES-24
26 48 EL-45 BND, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, BE, P4BC1DE2BE2EB9BV 2
90 Degree LR Elbow
1 2 EL-90 LR, CS A234-WPB, SMLS, BE, SCH 80, B16.9 P9LCFGSMBE10B900 3
2.5 24 EL-90 LR, CS A234-WPB, WLD, BE, STD, B16.9 P9LCFGWDBESTB900 3
26 48 EL-90 LR, CS A234-WPB, WLD, BE, 9.53mm (0.375") NOM. WT, P9LCFGWDBE2EB900 3
B16.9
90 Degree Bend
W/O TAN, PFI ES-24
2.5 24 EL-90 BND, CS A53-B TYPE E, ERW, BE, STD, B16.9, 3D, W/O P9BCDDERBESTB9BX
TAN, PFI ES-24
26 48 EL-90 BND, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, BE, P9BC1DE2BE2EB9BX
127182 HIGHEST
CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
FITTINGS
90 Degree Bend
W/O TAN, PFI ES-24
2.5 24 EL-90 BND, CS A53-B TYPE E, ERW, BE, STD, B16.9, 5D, W/O P9BCDDERBESTB9BV 2
TAN, PFI ES-24
26 48 EL-90 BND, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, BE, P9BC1DE2BE2EB9BV 2
Tee
1 2 TEE, CS A234-WPB, SMLS, BE, SCH 80, B16.9 PTECFGSMBE10B900
B16.9
Reducing Tee
1.5 2 1 1.5 RED TEE, CS A234-WPB, SMLS, BE, SCH 80 x SCH 80, B16.9 PRTCFGSMBE1010B9
x STD, B16.9
x 9.53mm (0.375") NOM. WT, B16.9
x STD, B16.9
x 9.53mm (0.375") NOM. WT, B16.9
x 9.53mm (0.375") NOM. WT, B16.9
Concentric Reducer
3 4 1 2 RED CON, CS A234-WPB, SMLS, BE, STD x SCH 80, B16.9 PRCCFGSMBEST10B9
WT x STD, B16.9
WT x 9.53mm (0.375") NOM. WT, B16.9
WT x 9.53mm (0.375") NOM. WT, B16.9
WT x 9.53mm (0.375") NOM. WT, B16.9
Eccentric Reducer
3 4 1 2 RED ECC, CS A234-WPB, SMLS, BE, STD x SCH 80, B16.9 PRECFGSMBEST10B9
WT x STD, B16.9
WT x 9.53mm (0.375") NOM. WT, B16.9
WT x 9.53mm (0.375") NOM. WT, B16.9
WT x 9.53mm (0.375") NOM. WT, B16.9
Thredolet
2.5 48 1 2 THREDOLET, CS A105, CL3000, INPT, B16.11, HDR/BRN, SP- PLTCDKK30000T101
97
Weldolet
2.5 48 1 2 WELDOLET, CS A234-WPB, STD x SCH 80, BE, B16.25, PLWCFG00ST10B111
HDR/BRN, B31.1, SP-97, MFR STD
FLANGES
Threaded Flange
1 2 FLG-THD, CS A105, CL150, RF, B16.5 PFTCDK15RF00B500
1 2 FLG-THD, CS A105, CL150, FF, B16.5 PFTCDK15FF00B500 2
Slip On Flange
1 24 FLG-SLP ON, CS A105, CL150, RF, B16.5 PFPCDK15RF00B500
1 24 FLG-SLP ON, CS A105, CL150, FF, B16.5 PFPCDK15FF00B500 2
Weld Neck Flange
1 2 FLG-WN, CS A105, CL150, RF, SCH 80, B16.5 PFWCDK15RF10B500 3
2.5 24 FLG-WN, CS A105, CL150, RF, STD, B16.5 PFWCDK15RFSTB500 3
Blind Flange
1 24 FLG-BLND, CS A105, CL150, RF, B16.5 PFBCDK15RF00B500
26 48 FLG-BLND, CS A36, CL. D, FF, AWWA C207 PFBCD1CDFF00WJ00
1 24 FLG-BLND, CS A105, CL150, FF, B16.5 PFBCDK15FF00B500 2
127182 HIGHEST
CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
GASKETS
Gasket
GARD 3000
BOLTS
0.5 1 1 35 BLT-STUD, CR-1/5 MO A193-B7M, W/ 2 HVY HEX NUTS, CS PB1JC5C2LAY00001
1.125 2 3 44.25 BLT-STUD, CR-1/5 MO A193-B7M, W/ 2 HVY HEX NUTS, CS PB1JC5C2LAX00001
(IMP)
VALVES
Knife Gate Valve
3 6 VLV-KNFGT, DI A536-65-45-12, CL150, FF, B16.5, MFR STD, PVKFAX15FFA04A10
TAPPED LUG, MFR, OS&Y, RS, BB, FULL PORT, SLD GATE,
RING, MFR PKG, HW, CLARKSON KGF OR EQUAL
RING, MFR PKG, GO, CLARKSON KGF OR EQUAL
Plug Valve
2 2 VLV-PLG, CS A216-WCB, CL150, RF, B16.5, B16.10 SHORT, PVPCFB15RFA02A01
NON-LUBR, SLVD, B16.34, BC, RED PORT, TAPERED PLUG,
316 SS PLUG/STEM, PTFE SLEEVE, FIRE-TESTED API 607, LO
W/ LOCK, NON-ASB
127182 HIGHEST
CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
90 Main Branch C1E2V
H 1 TE
E
A 1.5 RT TE
D
E 2 LS LS TE
R
3 LS LS RT TE
4 LS LS LW RT TE
6 LS LS LW ZS RT TE
8 LS LS LW ZS ZS RT TE
10 LS LS LW ZS ZS ZS RT TE
12 LS LS LW ZS ZS ZS ZS RT TE
14 LS LS LW ZS ZS ZS ZS ZS RT TE
16 LS LS LW ZS ZS ZS ZS ZS ZS RT TE
18 LS LS LW ZS ZS ZS ZS ZS ZS ZS RT TE
20 LS LS LW ZS ZS ZS ZS ZS ZS ZS ZS RT TE
22 LS LS LW LW LW LW LW LW LW ZP ZP ZP RT TE
24 LS LS LW LW LW LW LW LW LW ZP ZP ZP RT RT TE
1 1.5 2 3 4 6 8 10 12 14 16 18 20 22 24
BRANCH (NPS)
Legend
RT REDUCING TEE
TE TEE
ZP REINFORCING PAD
ZS STUB-IN
127182 HIGHEST
CRAMIREZ
Document No: 26418-220-3PS-P000-00001
Job Name: INGENIERÍA DE DETALLES Y COMPRAS Class: C1F2A Date: 26-Sep-22
5TO MOLINO DE BOLAS
Piping Design Code: NFPA 24 Piping Material: ASTM A53-B

Flange Facing: FLAT FACE Valve Material: CI A126B/BRZ B62-UL/FM
Heat Treatment: --
NDE: PER ASME B31.3
Service(s)
WF Fire Water
Not Required
NPS: 1 - 14
-29 150
38 150

NPS 1 1.5 2 3 4 6 8 10 12 14
OD (in) 1.315 1.900 2.375 3.500 4.500 6.625 8.625 10.750 12.750 14.000
SCHEDULE XS XS XS STD STD STD STD STD STD STD
W.T. (in) 0.179 0.200 0.218 0.216 0.237 0.280 0.322 0.365 0.375 0.375
General Notes
727 Test pressure at 200 psig, according to NFPA 24
1473 Underground bolts and flanges on this class shall be protected with coal tar free paint, applied by field
ES-0006 (26418-220-3PS-P000-00006).
1552 For flanges bolts installation see Annex A, "Bolt Torque Tables" in document N°: 172-I1909E-000-46-ES-0007 (26418-220-3PS-P000-
00007).
1554 Project Line List document N°: 172-I1909E-000-46-EL-0002 (26418-220-M0X-0000-00002).
119703 HIGHEST
119562 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
PIPE
Pipe
1 2 PIPE, CS A53-B TYPE S, SMLS, ENPT, XS, B36.10M, SNGL PPPCDFSMM3XSB7S1
RANDOM LGTHS
1 2.5 14 PIPE, CS A53-B TYPE E, ERW, BE, STD, B36.10M, DBL PPPCDDERBESTB7D1
RANDOM LGTHS
RANDOM LGTHS
RANDOM LGTHS
NIPPLES / SWAGES
Nipple
1 2 NIP, CS A53-B TYPE S, SMLS, ENPT, XS, A733, 3" PNPCDFSMM3XSA7L3
1 2 NIP, CS A53-B TYPE S, SMLS, ENPT, XS, A733, 6" PNPCDFSMM3XSA7L6 2
2.5 14 1 2 SWG-CON, CS A234-WPB N, SMLS, BE x ENPT, STD x XS, SP- PNCCFHSMBMSTXSM9
95
2.5 12 1 2 SWG-ECC, CS A234-WPB N, SMLS, BE x ENPT, STD x XS, SP- PNECFHSMBMSTXSM9
95
FITTINGS
Coupling
1 2 CPLG, CS A105N, INPT, CL3000, B16.11 PCPCDLTFK3BH0000
Reducing Coupling
1.5 2 1 2 RED CPLG, CS A105N, INPT, CL3000, B16.11 PR2CDLTFK3BH0000
Cap
1 2 CAP, CS A105N, INPT, CL3000, B16.11 PCACDLTFK3BH0000
2.5 14 CAP, CS A234-WPB N, SMLS, BE, STD, B16.9 PCACFHSMBESTB900
45 Degree Elbow
1 2 EL-45, CS A105N, INPT, CL3000, B16.11 P4ECDLTFK3BH0000
45 Degree LR Elbow
2.5 14 EL-45 LR, CS A234-WPB N, SMLS, BE, STD, B16.9 P4LCFHSMBESTB900
90 Degree Elbow
1 2 EL-90, CS A105N, INPT, CL3000, B16.11 P9ECDLTFK3BH0000
90 Degree LR Elbow
2.5 14 EL-90 LR, CS A234-WPB N, SMLS, BE, STD, B16.9 P9LCFHSMBESTB900
Tee
1 2 TEE, CS A105N, INPT, CL3000, B16.11 PTECDLTFK3BH0000
2.5 14 TEE, CS A234-WPB N, SMLS, BE, STD, B16.9 PTECFHSMBESTB900
Reducing Tee
1.5 2 1 1.5 RED TEE, CS A105N, INPT, CL3000, B16.11 PRTCDLTFK3BH0000
3 14 2.5 12 RED TEE, CS A234-WPB N, SMLS, BE, STD x STD, B16.9 PRTCFHSMBESTSTB9
Concentric Reducer
3 14 2.5 12 RED CON, CS A234-WPB N, SMLS, BE, STD x STD, B16.9 PRCCFHSMBESTSTB9
Eccentric Reducer
3 14 2.5 12 RED ECC, CS A234-WPB N, SMLS, BE, STD x STD, B16.9 PRECFHSMBESTSTB9
Thredolet
2.5 14 1 2 THREDOLET, CS A105N, CL3000, INPT, B16.11, HDR/BRN, PLTCDLK30000T101
SP-97
Weldolet
3 14 1 4 WELDOLET, CS A105N, STD x STD, BE, B16.25, HDR/BRN, PLWCDL00STSTB101
SP-97
FLANGES
Threaded Flange
1 2 FLG-THD, CS A105N, CL150, RF, B16.5 PFTCDL15RF00B500
Slip On Flange
2.5 14 FLG-SLP ON, CS A105, CL150, FF, B16.5 PFPCDK15FF00B500
Blind Flange
1 14 FLG-BLND, CS A105N, CL150, RF, B16.5 PFBCDL15RF00B500
GASKETS
Gasket
1 14 GASKET, 316L SS-PTFE, SPIRAL WOUND, 3.2mm (1/8") THK, PGGGEASW8515B5A1
316L SS INNER RING, 316L SS OUTER RING, CL150, B16.5,
B16.20
BOLTS
119703 HIGHEST
119562 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
BOLTS
VALVES
Gate Valve
3 10 VLV-GT, CS A216-WCB, CL150, RF, B16.5, B16.10, B16.34, PVGCFB15RFAA4FH2
OS&Y, BB, FULL PORT, FLX WDG, API 600 TRIM 8, CI FG
PKG W/ ANTI-EXTR, API 600 BOLTING, HW, NON-ASB
PKG W/ ANTI-EXTR, API 600 BOLTING, GO, NON-ASB
6 12 VLV-GT, DI A536-65-45-12, CL150, FF, B16.42, B16.10, AWWA PVGFAX15FFJA1A3B 2
C515, NRS, BB, FULL PORT, ELS ENCAP WDG, BRZ TRIM,
MFR PKG, MFR STD BOLTS, UL/FM, 17 BARG (250 PSIG)
CWP, ADJ PI, NON-ASB
Ball Valve
1 2 VLV-BALL, CS A105N, CL300, INPT, B16.11, MFR STD, 3-PC PVBCDL30TFC01320
SO BOLTED, FLOATING, API 608, BI-DIR, FULL PORT, 316 SS
TRIM, RTFE ST, FG GSK, FIRE-TESTED API 607, LO W/ LOCK,
NON-ASB
119703 HIGHEST
119562 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
90 Main Branch C1F2A
H 1 TE
E
A 1.5 LT TE
D
E 2 LT LT TE
R
2.5 LT LT LT TE
3 LT LT LT RT TE
4 LT LT LT LW RT TE
6 LT LT LT LW LW RT TE
8 LT LT LT LW LW LW RT TE
10 LT LT LT LW LW ZP ZP RT TE
12 LT LT LT LW LW LW ZP ZP RT TE
14 LT LT LT LW LW LW LW ZP ZP RT TE
1 1.5 2 2.5 3 4 6 8 10 12 14
BRANCH (NPS)
Legend
LT INTEGRALLY REINF. BRANCH FITTING - THREDOLET OR EQUAL
RT REDUCING TEE
TE TEE
ZP REINFORCING PAD
119703 HIGHEST
119562 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
Job Name: INGENIERÍA DE DETALLES Y COMPRAS Class: G1E1A Date: 26-Sep-22
5TO MOLINO DE BOLAS
Piping Design Code: ASME B31.3 - CAT D Piping Material: CS A53-B SMLS (GALV)/ERW
Flange Facing: RAISED FACE Valve Material: CS A216/A105/BRZ B584
Heat Treatment: --
NDE: PER ASME B31.3
Service(s)
AI Instrument Air WD Potable Water
Not Required
NPS: 0.5 - 24
-20 150
38 150
50 150

NPS 0.5 0.75 1 1.5 2 3 4 6 8 10 12 14 16 18 20 24
OD (in) 0.840 1.050 1.315 1.900 2.375 3.500 4.500 6.625 8.625 10.750 12.750 14.000 16.000 18.000 20.000 24.000
SCHEDULE 80 80 80 80 80 STD STD STD STD STD STD STD STD STD STD STD
W.T. (in) 0.147 0.154 0.179 0.200 0.218 0.216 0.237 0.280 0.322 0.365 0.375 0.375 0.375 0.375 0.375 0.375
General Notes
0707 Instrument air test service, will be replaced by a containment air test at operating pressure. Leak test before putting into service.
1134 Use half coupling instead of threadolet for operation pressure less than 50 psig.
any sealant.
1503 For fluid service WD, spools from 2.5" to 20" shall be hot dip galvanized by spools fabricator at shop.
1507 If a Branch / Header configuration different from those indicated in branch table is required, is must be evaluated particularly by Piping
Stress / Materials Engineer.
00007).
1553 For galvanized process see document N°: 172-I1909E-000-45-ES-0007 (26418-220-3PS-NX00-00001).
119905 HIGHEST
119882 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
PIPE
Pipe
0.5 2 PIPE, CS A53-B TYPE S, SMLS, ENPT, SCH 80, B36.10M, PPPCDFSMM310B7G4
GALV, SNGL RANDOM LGTHS
RANDOM LGTHS
RANDOM LGTHS
RANDOM LGTHS
NIPPLES / SWAGES
3 4 0.5 2 SWG-CON, CS A234-WPB, SMLS, BE x ENPT, STD x SCH 80, PNCCFGSMBMST10M9
SP-95
3 4 0.5 2 SWG-ECC, CS A234-WPB, SMLS, BE x ENPT, STD x SCH 80, PNECFGSMBMST10M9
SP-95
FITTINGS
Coupling
0.5 2 CPLG, MI A197, INPT, CL300, B16.3, GALV PCPFERTF30B3UA00
Reducing Coupling
0.75 2 0.5 1.5 RED CPLG, MI A197, INPT, CL300, B16.3, GALV PR2FERTF30B3UA00
Union
0.5 2 UN, MI A197, INPT, CL300, B16.39, GALV PUNFERTF30BTUA00
Cap
0.5 2 CAP, MI A197, INPT, CL300, B16.3, GALV PCAFERTF30B3UA00
45 Degree Elbow
0.5 2 EL-45, MI A197, INPT, CL300, B16.3, GALV P4EFERTF30B3UA00
45 Degree LR Elbow
90 Degree Elbow
0.5 2 EL-90, MI A197, INPT, CL300, B16.3, GALV P9EFERTF30B3UA00
90 Degree LR Elbow
Tee
0.5 2 TEE, MI A197, INPT, CL300, B16.3, GALV PTEFERTF30B3UA00
Reducing Tee
0.75 2 0.5 1.5 RED TEE, MI A197, INPT, CL300, B16.3, GALV PRTFERTF30B3UA00
3 3 2 2 RED TEE, CS A234-WPB, WLD, BE, STD x SCH 80, B16.9 PRTCFGWDBEST10B9
4 24 3 20 RED TEE, CS A234-WPB, WLD, BE, STD x STD, B16.9 PRTCFGWDBESTSTB9
Concentric Reducer
Eccentric Reducer
Thredolet
97
FLANGES
Threaded Flange
0.5 2 FLG-THD, CS A105, CL150, RF, B16.5, GALV A153 PFTCDK15RF00B5G5
0.5 2 FLG-THD, CS A105, CL150, FF, B16.5, GALV A153 PFTCDK15FF00B5G5 2
Slip On Flange
Blind Flange
0.5 2 FLG-BLND, CS A105, CL150, RF, B16.5, GALV A153 PFBCDK15RF00B5G5
3 24 FLG-BLND, CS A105, CL150, RF, B16.5 PFBCDK15RF00B500
0.5 2 FLG-BLND, CS A105, CL150, FF, B16.5, GALV A153 PFBCDK15FF00B5G5 2
GASKETS
Gasket
119905 HIGHEST
119882 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
GASKETS
Gasket
BOLTS
1 0.5 1 1.5 35 BLT-STUD, CR-1/5 MO A193-B7M, W/ 2 HVY HEX NUTS, CS PB1JC5C2LAY00001
1 1.125 1.25 4 38.75 BLT-STUD, CR-1/5 MO A193-B7M, W/ 2 HVY HEX NUTS, CS PB1JC5C2LAX00001
(IMP)
VALVES
Gate Valve
3 24 VLV-GT, CI A126-B, CL125, FF, B16.1, B16.10, SP-70, OS&Y, PVGFCV12FFA38AFE
BB, SLD WDG, BRZ TRIM, HW, NON-ASB
Knife Gate Valve
STEM, METAL ST, PTFE PKG, HW, NON-ASB
Globe Valve
0.5 2 VLV-GLB, CS A105, CL800, INPT, B16.11, MFR STD, T-BODY, PVLCDK80TFC01BH2
API 602, OS&Y, BB, STD PORT, CONICAL DISC, API 602 TRIM
ASB
ASB
16, CI FG PKG W/ ANTI-EXTR, API 623 BOLTING, GO, NON-
ASB
Check Valve
0.5 2 VLV-CHK, CS A105N, CL800, INPT, B16.11, MFR STD, SWING, PVCCDL80TFC02A07
NON-ASB
3 24 VLV-CHK, CS A216-WCB, CL150, RF, B16.5, B16.10, SWING, PVCCFB15RFAA29J2
Ball Valve
0.5 2 VLV-BALL, BRS B584-C84400, 600 CWP, INPT, B1.20.1, MFR PVBBBNWFTF002A08
STD, 1-PC, FLOATING, SP-110, RED PORT, 316 SS TRIM,
RTFE ST, PTFE PKG, LO W/ LOCK, NON-ASB
Butterfly Valve
607, LO, NON-ASB
607, GO, NON-ASB
119905 HIGHEST
119882 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
90 Main Branch G1E1A
H 0.5 TE
E
A 0.75 RT TE
D
E 1 RT RT TE
R
1.5 RT RT RT TE
2 LS LS LS LS TE
3 LS LS LS LS RT TE
14 LS LS LS LS ZS ZS ZS ZS ZS ZS RT TE
16 LS LS LS LS ZS ZS ZS ZS ZS ZS ZS RT TE
18 LS LS LS LS ZS ZS ZS ZS ZS ZS ZS ZS RT TE
20 LS LS LS LS ZS ZS ZS ZS ZS ZS ZS ZS ZS RT TE
24 LS LS LS LS LW LW LW LW LW LW LW ZP ZP ZP RT TE
0.5 0.75 1 1.5 2 3 4 6 8 10 12 14 16 18 20 24
BRANCH (NPS)
Legend
RT REDUCING TEE
TE TEE
ZP REINFORCING PAD
ZS STUB-IN
119905 HIGHEST
119882 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
Job Name: INGENIERÍA DE DETALLES Y COMPRAS Class: L1E0VJ Date: 26-Sep-22
5TO MOLINO DE BOLAS
Piping Design Code: ASME B31.3 - CAT D Piping Material: ASTM A53-B/API 5L-B GE NR LND
Design For Vacuum: NO Flange Material: ASTM A105/ASTM 536 VICTAULIC
Corrosion Allowance: 0.0" Gasket Material: ARAMID FIBER NBR 1/16"-1/8" THK
Sour Service: --
Heat Treatment: --
NDE: PER ASME B31.3
Service(s)
SL Slurry CT Concentrate (Copper) TL Final Tailings
Not Required
NPS: 2 - 52
-20 100
38 100
50 100

NPS 2 3 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38
OD (in) 2.375 3.500 4.500 6.625 8.625 10.750 12.750 14.000 16.000 18.000 20.000 22.000 24.000 26.000 28.000 30.000 32.000 34.000 36.000 38.000
SCHEDULE 80 STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD
W.T. (in) 0.218 0.216 0.237 0.280 0.322 0.365 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375
NPS 40 42 44 46 48 52
OD (in) 40.000 42.000 44.000 46.000 48.000 52.000
SCHEDULE STD STD STD STD STD --
W.T. (in) 0.375 0.375 0.375 0.375 0.375 0.375
General Notes
0402 Use flat face flanges and full face gaskets when mating to flat face cast Iron flanges (i.e. at cast iron valves, equipment nozzles, etc)
1118 Standard Victaulic Style-07 Zeroflex Couplings are to be used in all cases, except where flexibility or expansion needs/require the use
of Style-77 Standard Flexible Couplings. Style-77 Couplings shall be identified on All isometric drawings.
1120 The use of 90Deg-3D elbows is restricted to locations where 5D elbows cannot be used due to interferances.
1235 Use only in cyclones feed pump discharge pipe.
1281 Grooved Ends shall be "Victaulic Square Machined Type".
1311 Use Victaulic brand or similar approved
ES-0006 (26418-220-3PS-P000-00006).
1551 The internal surface of the pipe and fittings shall be lined with natural rubber, in accordance with Technical Specification N°: 172-
I1909E-000-46-ES-0012 (26418-220-3PS-P000-00012).
00007).
125423 HIGHEST
118626 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
PIPE
Pipe
2 2 PIPE, CS A53-B TYPE S, SMLS, BE, SCH 80, B36.10M, 6.4mm PPPCDFSMBE10B7RS
(0.25") RUBBER LND, SNGL RANDOM LGTHS
3 8 PIPE, CS A53-B TYPE E, ERW, BE, STD, B36.10M, 6.4mm PPPCDDERBESTB7RD
(0.25") RUBBER LND, DBL RANDOM LGTHS
10 48 PIPE, CS A53-B TYPE E, ERW, BE, STD, B36.10M, 12.7mm PPPCDDERBESTB7RE
52 52 PIPE, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, BE, PPPC1DE2BE2EB7RE
9.53mm (0.375") NOM. WT, B36.10M, 12.7mm (0.5") RUBBER
LND, DBL RANDOM LGTHS
1 2 2 PIPE, CS A53-B TYPE S, SMLS, BE x PE, SCH 80, B36.10M, PPPCDFSMBP10B7RS 2
6.4mm (0.25") RUBBER LND, SNGL RANDOM LGTHS
1 3 8 PIPE, CS A53-B TYPE E, ERW, BE x PE, STD, B36.10M, PPPCDDERBPSTB7RD 2
6.4mm (0.25") RUBBER LND, DBL RANDOM LGTHS
1 10 48 PIPE, CS A53-B TYPE E, ERW, BE x PE, STD, B36.10M, PPPCDDERBPSTB7RE 2
1 52 52 PIPE, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, BE x PE, PPPC1DE2BP2EB7RE 2
1 2 2 PIPE, CS A53-B TYPE S, SMLS, PE, SCH 80, B36.10M, 6.4mm PPPCDFSMPE10B7RS 3
1 3 8 PIPE, CS A53-B TYPE E, ERW, PE, STD, B36.10M, 6.4mm PPPCDDERPESTB7RD 3
1 10 48 PIPE, CS A53-B TYPE E, ERW, PE, STD, B36.10M, 12.7mm PPPCDDERPESTB7RE 3
1 52 52 PIPE, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, PE, PPPC1DE2PE2EB7RE 3
FITTINGS
45 Degree LR Elbow
2 2 EL-45 LR, CS A234-WPB, SMLS, BE, SCH 80, B16.9, 6.4mm P4LCFGSMBE10B9RL 3
(0.25") RUBBER LND
3 8 EL-45 LR, CS A234-WPB, WLD, BE, STD, B16.9, 6.4mm (0.25") P4LCFGWDBESTB9RL 3
RUBBER LND
10 48 EL-45 LR, CS A234-WPB, WLD, BE, STD, B16.9, 12.7mm (0.5") P4LCFGWDBESTB9RM 3
RUBBER LND
45 Degree Bend
2 2 EL-45 BND, CS A53-B TYPE S, SMLS, BE, SCH 80, B16.9, P4BCDFSMBE10B9BC
6.4mm (0.25") RUBBER LND, 3D, W/O TAN, PFI ES-24
3 8 EL-45 BND, CS A53-B TYPE E, ERW, BE, STD, B16.9, 6.4mm P4BCDDERBESTB9BC
(0.25") RUBBER LND, 3D, W/O TAN, PFI ES-24
10 48 EL-45 BND, CS A53-B TYPE E, ERW, BE, STD, B16.9, 12.7mm P4BCDDERBESTB9BD
2 2 EL-45 BND, CS A53-B TYPE S, SMLS, BE, SCH 80, B16.9, P4BCDFSMBE10B9BH 2
3 8 EL-45 BND, CS A53-B TYPE E, ERW, BE, STD, B16.9, 6.4mm P4BCDDERBESTB9BH 2
10 48 EL-45 BND, CS A53-B TYPE E, ERW, BE, STD, B16.9, 12.7mm P4BCDDERBESTB9BJ 2
90 Degree LR Elbow
(0.25") RUBBER LND
RUBBER LND
RUBBER LND
90 Degree Bend
Tee
125423 HIGHEST
118626 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
FITTINGS
Tee
2 2 TEE, CS A234-WPB, SMLS, BE, SCH 80, B16.9, 6.4mm (0.25") PTECFGSMBE10B9RL
RUBBER LND
3 8 TEE, CS A234-WPB, WLD, BE, STD, B16.9, 6.4mm (0.25") PTECFGWDBESTB9RL
RUBBER LND
10 48 TEE, CS A234-WPB, WLD, BE, STD, B16.9, 12.7mm (0.5") PTECFGWDBESTB9RM
RUBBER LND
Reducing Tee
3 4 2 2 RED TEE, CS A234-WPB, WLD, BE, STD x SCH 80, B16.9, PRTCFGWDBEST10B8
6.4mm (0.25") RUBBER LND
4 8 3 6 RED TEE, CS A234-WPB, WLD, BE, STD x STD, B16.9, 6.4mm PRTCFGWDBESTSTB8
(0.25") RUBBER LND
10 48 4 46 RED TEE, CS A234-WPB, WLD, BE, STD x STD, B16.9, PRTCFGWDBESTSTB7
Concentric Reducer
3 4 2 2 RED CON, CS A234-WPB, SMLS, BE, STD x SCH 80, B16.9, PRCCFGSMBEST10B8
4 8 3 6 RED CON, CS A234-WPB, WLD, BE, STD x STD, B16.9, PRCCFGWDBESTSTB8
Eccentric Reducer
3 4 2 2 RED ECC, CS A234-WPB, SMLS, BE, STD x SCH 80, B16.9, PRECFGSMBEST10B8
4 8 3 6 RED ECC, CS A234-WPB, WLD, BE, STD x STD, B16.9, 6.4mm PRECFGWDBESTSTB8
(0.25") RUBBER LND
10 48 4 46 RED ECC, CS A234-WPB, WLD, BE, STD x STD, B16.9, PRECFGWDBESTSTB7
Weldolet
3 48 2 2 WELDOLET, CS A105, STD x SCH 80, BE, B16.25, HDR/BRN, PLWCDK00ST10B131
B31.3, SP-97, MFR STD
FLANGES
Slip On Flange
2 24 FLG-SLP ON, CS A105, CL150, FF, B16.5 PFPCDK15FF00B500
Reducing Slip On Flange
1 12 14 10 12 FLG-RED SLP ON, CS A105, CL150, FF, B16.5 PFRCDK15FF00B500
Blind Flange
2 24 FLG-BLND, CS A105, CL150, FF, B16.5 PFBCDK15FF00B500
GASKETS
Gasket
2 24 GASKET, ARAMID W/ NBR (BUNA-N) BINDER, FULL FACE, PGGGMGFF8115B5GB
GARD 3000
2 24 GASKET, ARAMID W/ NBR (BUNA-N) BINDER, FLAT RING, PGGGMGFR8115B5GB 2
BOLTS
(IMP)
VALVES
Knife Gate Valve
3 6 VLV-KNFGT, DI A536-65-45-12, 100 PSIG, FF, B16.5, MFR PVKFAXP4FFA05A09
8 24 VLV-KNFGT, DI A536-65-45-12, 100 PSIG, FF, B16.5, MFR PVKFAXP4FFA05A0E
Plug Valve
125423 HIGHEST
118626 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
VALVES
Plug Valve
1 2 2 VLV-PLG, CI A126-B, CL125, FF, B16.5, B16.10 SHORT, NON- PVPFCV12FFA06A04
ASB
125423 HIGHEST
118626 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
90 Main Branch L1E0VJ
H 2 TE
E
A 3 RT TE
D
E 4 ZS RT TE
R
6 ZS ZS RT TE
8 ZS ZS ZS RT TE
10 ZS ZS ZS ZS RT TE
12 ZS ZS ZS ZS ZS RT TE
14 ZS ZS ZS ZS ZS ZS RT TE
16 ZS ZS ZS ZS ZS ZS ZS RT TE
18 ZS ZS ZS ZS ZS ZS ZS ZS RT TE
20 ZS ZS ZS ZS ZS ZS ZS ZS ZS RT TE
24 LW LW LW LW LW LW LW ZP ZP ZP RT TE
30 LW LW LW LW LW LW ZP ZP ZP ZP ZP RT TE
36 LW LW LW LW LW LW LW ZP ZP ZP ZP ZP RT TE
42 LW LW LW LW LW LW LW LW LW ZP ZP ZP ZP RT TE
48 LW LW LW LW LW LW LW LW LW ZP ZP RT RT RT RT TE
2 3 4 6 8 10 12 14 16 18 20 24 30 36 42 48
BRANCH (NPS)
Legend
RT REDUCING TEE
TE TEE
ZP REINFORCING PAD
ZS STUB-IN
125423 HIGHEST
118626 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
Job Name: INGENIERÍA DE DETALLES Y COMPRAS Class: L1E0VT Date: 26-Sep-22
5TO MOLINO DE BOLAS
Piping Design Code: ASME B31.3 - CAT D Piping Material: ASTM A53-B/API 5L-B GE NR LND
Corrosion Allowance: 0.0" Bolt Material: CR-MO A193-B7
Flange Class: CLASS 150 Valve Trim: STAINLESS STEEL
Flange Facing: FLAT FACE
Sour Service: --
Heat Treatment: --
NDE: PER ASME B31.3
Service(s)
SL Slurry CT Concentrate (Copper) TL Final Tailings
Not Required
NPS: 2 - 52
-20 100
38 100
50 100

NPS 2 3 4 6 8 10 12 14 16 18 20 24 26 28 30 32 34 36 38 40
OD (in) 2.375 3.500 4.500 6.625 8.625 10.750 12.750 14.000 16.000 18.000 20.000 24.000 26.000 28.000 30.000 32.000 34.000 36.000 38.000 40.000
SCHEDULE 80 STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD
W.T. (in) 0.218 0.216 0.237 0.280 0.322 0.365 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375
NPS 42 44 46 48 50 52
OD (in) 42.000 44.000 46.000 48.000 50.000 52.000
SCHEDULE STD STD STD STD -- --
W.T. (in) 0.375 0.375 0.375 0.375 0.375 0.375
General Notes
0402 Use flat face flanges and full face gaskets when mating to flat face cast Iron flanges (i.e. at cast iron valves, equipment nozzles, etc)
1118 Standard Victaulic Style-07 Zeroflex Couplings are to be used in all cases, except where flexibility or expansion needs/require the use
of Style-77 Standard Flexible Couplings. Style-77 Couplings shall be identified on All isometric drawings.
1120 The use of 90Deg-3D elbows is restricted to locations where 5D elbows cannot be used due to interferances.
1235 Use only in cyclones feed pump discharge pipe.
1281 Grooved Ends shall be "Victaulic Square Machined Type".
1311 Use Victaulic brand or similar approved
ES-0006 (26418-220-3PS-P000-00006).
1551 The internal surface of the pipe and fittings shall be lined with natural rubber, in accordance with Technical Specification N°: 172-
I1909E-000-46-ES-0012 (26418-220-3PS-P000-00012).
00007).
122584 HIGHEST
118627 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
PIPE
Pipe
2 2 PIPE, CS A53-B TYPE S, SMLS, BE, SCH 80, B36.10M, 6.4mm PPPCDFSMBE10B7RS
3 8 PIPE, CS A53-B TYPE E, ERW, BE, STD, B36.10M, 6.4mm PPPCDDERBESTB7RD
10 24 PIPE, CS A53-B TYPE E, ERW, BE, STD, B36.10M, 12.7mm PPPCDDERBESTB7RE
26 48 PIPE, CS A53-B TYPE E, ERW, BE, STD, B36.10M, 25.4mm PPPCDDERBESTB7RC
(1.0") CERAMIC RUBBER LND, DBL RANDOM LGTHS
1 50 50 PIPE, CS A53-B TYPE E, ERW, PE, 9.53mm (0.375") NOM. WT, PPPCDDERPE2EG1RC
NONSTD CONF B36.10M, 25.4mm (1.0") CERAMIC RUBBER
1 52 52 PIPE, CS A53-B TYPE E, ERW, PE, 9.53mm (0.375") NOM. WT, PPPCDDERPE2EB7RC
B36.10M, 25.4mm (1.0") CERAMIC RUBBER LND, DBL
RANDOM LGTHS
1 2 2 PIPE, CS A53-B TYPE S, SMLS, BE x PE, SCH 80, B36.10M, PPPCDFSMBP10B7RS 2
6.4mm (0.25") RUBBER LND, SNGL RANDOM LGTHS
1 3 8 PIPE, CS A53-B TYPE E, ERW, BE x PE, STD, B36.10M, PPPCDDERBPSTB7RD 2
1 10 24 PIPE, CS A53-B TYPE E, ERW, BE x PE, STD, B36.10M, PPPCDDERBPSTB7RE 2
1 26 48 PIPE, CS A53-B TYPE E, ERW, BE x PE, STD, B36.10M, PPPCDDERBPSTB7RC 2
25.4mm (1.0") CERAMIC RUBBER LND, DBL RANDOM LGTHS
1 2 2 PIPE, CS A53-B TYPE S, SMLS, PE, SCH 80, B36.10M, 6.4mm PPPCDFSMPE10B7RS 3
1 3 8 PIPE, CS A53-B TYPE E, ERW, PE, STD, B36.10M, 6.4mm PPPCDDERPESTB7RD 3
1 10 24 PIPE, CS A53-B TYPE E, ERW, PE, STD, B36.10M, 12.7mm PPPCDDERPESTB7RE 3
1 26 48 PIPE, CS A53-B TYPE E, ERW, PE, STD, B36.10M, 25.4mm PPPCDDERPESTB7RC 3
(1.0") CERAMIC RUBBER LND, DBL RANDOM LGTHS
FITTINGS
45 Degree LR Elbow
(0.25") RUBBER LND
RUBBER LND
RUBBER LND
26 48 EL-45 LR, CS A234-WPB, WLD, BE, STD, B16.9, 25.4mm (1.0") P4LCFGWDBESTB9RP 3
CERAMIC RUBBER LND
45 Degree Bend
26 48 EL-45 BND, CS A53-B TYPE E, ERW, BE, STD, B16.9, 25.4mm P4BCDDERBESTB9BY
(1.0") CERAMIC RUBBER LND, 3D, W/O TAN, PFI ES-24
26 48 EL-45 BND, CS A53-B TYPE E, ERW, BE, STD, B16.9, 25.4mm P4BCDDERBESTB9BZ 2
90 Degree LR Elbow
(0.25") RUBBER LND
RUBBER LND
RUBBER LND
26 48 EL-90 LR, CS A234-WPB, WLD, BE, STD, B16.9, 25.4mm (1.0") P9LCFGWDBESTB9RP 3
CERAMIC RUBBER LND
90 Degree Bend
122584 HIGHEST
118627 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
FITTINGS
90 Degree Bend
26 48 EL-90 BND, CS A53-B TYPE E, ERW, BE, STD, B16.9, 25.4mm P9BCDDERBESTB9BY
26 48 EL-90 BND, CS A53-B TYPE E, ERW, BE, STD, B16.9, 25.4mm P9BCDDERBESTB9BZ 2
Tee
2 2 TEE, CS A234-WPB, SMLS, BE, SCH 80, B16.9, 6.4mm (0.25") PTECFGSMBE10B9RL
RUBBER LND
3 8 TEE, CS A234-WPB, WLD, BE, STD, B16.9, 6.4mm (0.25") PTECFGWDBESTB9RL
RUBBER LND
10 24 TEE, CS A234-WPB, WLD, BE, STD, B16.9, 12.7mm (0.5") PTECFGWDBESTB9RM
RUBBER LND
26 48 TEE, CS A234-WPB, WLD, BE, STD, B16.9, 25.4mm (1.0") PTECFGWDBESTB9RP
CERAMIC RUBBER LND
Reducing Tee
3 4 2 2 RED TEE, CS A234-WPB, WLD, BE, STD x SCH 80, B16.9, PRTCFGWDBEST10B8
4 8 3 6 RED TEE, CS A234-WPB, WLD, BE, STD x STD, B16.9, 6.4mm PRTCFGWDBESTSTB8
(0.25") RUBBER LND
25.4mm (1.0") CERAMIC RUBBER LND
Concentric Reducer
3 4 2 2 RED CON, CS A234-WPB, SMLS, BE, STD x SCH 80, B16.9, PRCCFGSMBEST10B8
Eccentric Reducer
3 4 2 2 RED ECC, CS A234-WPB, SMLS, BE, STD x SCH 80, B16.9, PRECFGSMBEST10B8
4 8 3 6 RED ECC, CS A234-WPB, WLD, BE, STD x STD, B16.9, 6.4mm PRECFGWDBESTSTB8
(0.25") RUBBER LND
1 50 50 48 48 RED ECC, CS A234-WPBW N, WLD, BE, 9.53mm (0.375") PRECFKWDBE2ESTBR
NOM. WT x STD, B16.9, SP-75, 25.4mm (1.0") CERAMIC
RUBBER LND
Weldolet
3 48 2 2 WELDOLET, CS A105, STD x SCH 80, BE, B16.25, HDR/BRN, PLWCDK00ST10B131
B31.3, SP-97, MFR STD
FLANGES
Slip On Flange
2 24 FLG-SLP ON, CS A105, CL150, FF, B16.5 PFPCDK15FF00B500
1 26 50 FLG-SLP ON, CS A36, CL. D, FF, AWWA C207 PFPCD1CDFF00WJ00
2 24 FLG-SLP ON, CS A105, CL150, RF, B16.5 PFPCDK15RF00B500 2
Reducing Slip On Flange
1 34 52 28 48 FLG-RED SLP ON, CS A36, CL. D, FF, AWWA C207 PFRCD1CDFF00WJ00
Blind Flange
2 24 FLG-BLND, CS A105, CL150, FF, B16.5 PFBCDK15FF00B500
GASKETS
122584 HIGHEST
118627 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
GASKETS
Gasket
2 24 GASKET, ARAMID W/ NBR (BUNA-N) BINDER, FULL FACE, PGGGMGFF8115B5GB
GARD 3000
2 24 GASKET, ARAMID W/ NBR (BUNA-N) BINDER, FLAT RING, PGGGMGFR8115B5GB 2
BOLTS
(IMP)
VALVES
Knife Gate Valve
RING, MFR PKG, HW, CLARKSON KGF OR EQUAL
RING, MFR PKG, GO, CLARKSON KGF OR EQUAL
3 6 VLV-KNFGT, DI A536-65-45-12, 100 PSIG, FF, B16.5, MFR PVKFAXP4FFA05A09 2
8 24 VLV-KNFGT, DI A536-65-45-12, 100 PSIG, FF, B16.5, MFR PVKFAXP4FFA05A0E 2
Plug Valve
1 2 2 VLV-PLG, CI A126-B, CL125, FF, B16.5, B16.10 SHORT, NON- PVPFCV12FFA06A04
ASB
122584 HIGHEST
118627 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
90 Main Branch L1E0VT
H 2 TE
E
A 3 RT TE
D
E 4 ZS RT TE
R
6 ZS ZS RT TE
8 ZS ZS ZS RT TE
10 ZS ZS ZS ZS RT TE
12 ZS ZS ZS ZS ZS RT TE
14 ZS ZS ZS ZS ZS ZS RT TE
16 ZS ZS ZS ZS ZS ZS ZS RT TE
18 ZS ZS ZS ZS ZS ZS ZS ZS RT TE
20 ZS ZS ZS ZS ZS ZS ZS ZS ZS RT TE
24 LW LW LW LW LW LW LW ZP ZP ZP RT TE
30 LW LW LW LW LW LW ZP ZP ZP ZP ZP RT TE
36 LW LW LW LW LW LW LW ZP ZP ZP ZP ZP RT TE
42 LW LW LW LW LW LW LW LW LW ZP ZP ZP ZP RT TE
48 LW LW LW LW LW LW LW LW LW ZP ZP RT RT RT RT TE
2 3 4 6 8 10 12 14 16 18 20 24 30 36 42 48
BRANCH (NPS)
Legend
RT REDUCING TEE
TE TEE
ZP REINFORCING PAD
ZS STUB-IN
122584 HIGHEST
118627 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
Job Name: INGENIERÍA DE DETALLES Y COMPRAS Class: M2F0H2 Date: 26-Sep-22
5TO MOLINO DE BOLAS
Piping Design Code: National Fire Protection Association Piping Material: HDPE ISO4427 PE100 PN16
Design For Vacuum: NO Flange Material: ASTM A105/ASTM A536 CONVOLUTED
Flange Class: PN 16 Bolt Material: CR-MO A193-B7
Flange Facing: FLAT FACE Valve Material: CI/DI
Sour Service: -- Valve Trim: BRONZE
Heat Treatment: --
NDE: PER ASME B31.3
Service(s)
WF Fire Water
Not Required
NPS: 4 - 16
20 220
30 190

NPS 4 6 8 10 12 14 16
OD (in) 110.000 180.000 225.000 280.000 315.000 355.000 400.000
SCHEDULE -- -- -- -- -- -- --
W.T. (in) 10.000 14.600 18.200 22.700 28.600 32.200 36.300
General Notes
727 Test pressure at 200 psig, according to NFPA 24
1040 All pipe and fittings in a line shall be supplied from one company's resin with the same melting point.
1041 After initial tightening of flange bolts, allow flange assembly to set two hours minimum and then retorque the bolts.
1042 Design rating for fittings shall match that of pipe.
1473 Underground bolts and flanges on this class shall be protected with coal tar free paint, applied by field
1474 Pressure and Temperature rating are based on Tehmco catalog Table 7.3 for PECC100 (ref.)
1488 For branches use only standard tee and reducer concentric or eccentric, the reducer tee or stub in are not allowed in this spec.
00007).
119663 HIGHEST
119551 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
PIPE
Pipe
4 16 PIPE, HDPE ISO 4427-PE100, SMLS, PE, PN16, MFR STD, PPPPMGSMPERGM1UL
UL/FM
FITTINGS
30 Degree Miter Elbow
4 16 EL-30 MIT, HDPE ISO 4427-PE100, FAB, PE, PN16, MFR STD, P3MPMGF1PERGM1U2
UL/FM
UL/FM
UL/FM
UL/FM
Tee
4 16 TEE, HDPE ISO 4427-PE100, FAB, PE, PN16, MFR STD, UL/FM PTEPMGF1PERGM1U2
Reducing Tee
6 16 4 14 RED TEE, HDPE ISO 4427-PE100, FAB, PE, PN16 x PN16, PRTPMGF1PERGRGU1
MFR STD, UL/FM
Concentric Reducer
6 6 4 4 RED CON, HDPE ISO 4427-PE100, FAB, PE, PN16 x PN16, PRCPMGF1PERGRGU1
MFR STD, UL/FM
MFR STD, UL/FM
MFR STD, UL/FM
Eccentric Reducer
6 6 4 4 RED ECC, HDPE ISO 4427-PE100, FAB, PE, PN16 x PN16, PREPMGF1PERGRGU1
MFR STD, UL/FM
MFR STD, UL/FM
MFR STD, UL/FM
Adapter - Flange
4 16 ADPT-FLG, HDPE ISO 4427-PE100, MOLD, PE, PN16, MFR PADPMGMDPERGM1U2
STD, UL/FM
FLANGES
Backing Flange
4 16 FLG-BKG, DI A536-65-45-12, CL150, FF, FM CL250, MFR STD, PFGFAX15FFSYM2E7
IPS, B16.5 BOLT PATTERN, EPX COATED, CONVLTD
Blind Flange
4 16 FLG-BLND, CS A105, CL150, FF, B16.5, EPX COATED PFBCDK15FF00B5ZX
GASKETS
Gasket
4 16 GASKET, 316L SS-PTFE, SPIRAL WOUND, 3.2mm (1/8") THK, PGGGEASW8515B5A1
316L SS INNER RING, 316L SS OUTER RING, CL150, B16.5,
B16.20
BOLTS
VALVES
Gate Valve
PKG W/ ANTI-EXTR, API 600 BOLTING, HW, NON-ASB
PKG W/ ANTI-EXTR, API 600 BOLTING, GO, NON-ASB
12 14 VLV-GT, DI A536-65-45-12, CL150, FF, B16.42, B16.10, AWWA PVGFAX15FFJA1A3B 2
C515, NRS, BB, FULL PORT, ELS ENCAP WDG, BRZ TRIM,
MFR PKG, MFR STD BOLTS, UL/FM, 17 BARG (250 PSIG)
CWP, ADJ PI, NON-ASB
119663 HIGHEST
119551 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
90 Main Branch M2F0H2
H 3 TE
E
A 4 TE
D
E 6 TE
R
8 TE
10 TE
12 TE
14 TE
16 TE
3 4 6 8 10 12 14 16
BRANCH (NPS)
Legend
TE TEE
119663 HIGHEST
119551 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
Job Name: INGENIERÍA DE DETALLES Y COMPRAS Class: S1E0B Date: 26-Sep-22
5TO MOLINO DE BOLAS
Piping Design Code: ASME B31.3 Piping Material: ASTM A312-304L

Design For Vacuum: NO Flange Material: ASTM A182 F304L
Flange Class: CLASS 150 Bolt Material: 304 SS A193-B8 CL. 2
Flange Facing: RAISED FACE Valve Material: ASTM A351 CF8M
Heat Treatment: --
NDE: PER ASME B31.3
Service(s)
GO Gear Lubrication Oil (LP) GG Grease (LP) HY Hydraulic Oil (LP)
LO Lube Oil Supply (LP) LR Lube Oil Return (LP) WE Waste Effluent/Chemical Waste
EA Exhaust Air
Not Required
NPS: 0.5 - 12
-29 150
38 150

NPS 0.5 0.75 1 1.5 2 2.5 3 4 6 8 10 12
OD (in) 0.840 1.050 1.315 1.900 2.375 2.875 3.500 4.500 6.625 8.625 10.750 12.750
SCHEDULE 40S 40S 40S 40S 40S 10S 10S 10S 10S 10S 10S 10S
W.T. (in) 0.109 0.113 0.133 0.145 0.154 0.120 0.120 0.120 0.134 0.148 0.165 0.180
General Notes
0996 Pressure-Temperature Ratings Based on Flange Ratings.
1405 Pipes 10" an larger shall only be used with fluid "EA".
00007).
125823 HIGHEST
119784 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
PIPE
Pipe
0.5 2 PIPE, 304L SS A312-TP304L, SMLS, PE, SCH 40S, B36.19M, PPPS5ASMPE08B8S1
SNGL RANDOM LGTHS
2.5 12 PIPE, 304L SS A312-TP304L, ERW, BE, SCH 10S, B36.19M, PPPS5AERBE04B8D1
DBL RANDOM LGTHS
0.5 2 PIPE, 304L SS A312-TP304L, SMLS, BE x PE, SCH 40S, PPPS5ASMBP08B8S1 2
B36.19M, SNGL RANDOM LGTHS
1 2.5 12 PIPE, 304L SS A312-TP304L, ERW, PE, SCH 10S, B36.19M, PPPS5AERPE04B8D1 2
DBL RANDOM LGTHS
1 2.5 12 PIPE, 304L SS A312-TP304L, ERW, BE x PE, SCH 10S, PPPS5AERBP04B8D1 3
B36.19M, DBL RANDOM LGTHS
FITTINGS
Coupling
0.5 2 CPLG, 304L SS A182-F304L, SW, CL3000, B16.11 PCPS4XSWK3BH0000
Reducing Coupling
0.75 2 0.5 1.5 RED CPLG, 304L SS A182-F304L, SW, CL3000, B16.11 PR2S4XSWK3BH0000
Union
0.5 2 UN, 304L SS A182-F304L, SW, CL3000, SP-83 PUNS4XSWK3SJ0000
Cap
0.5 2 CAP, 304L SS A182-F304L, SW, CL3000, B16.11 PCAS4XSWK3BH0000
45 Degree Elbow
0.5 2 EL-45, 304L SS A182-F304L, SW, CL3000, B16.11 P4ES4XSWK3BH0000
45 Degree LR Elbow
2.5 12 EL-45 LR, 304 SS A403-WP304-W, WLD, BE, SCH 10S, B16.9 P4LS3HWDBE04B900
90 Degree Elbow
0.5 2 EL-90, 304L SS A182-F304L, SW, CL3000, B16.11 P9ES4XSWK3BH0000
90 Degree LR Elbow
2.5 12 EL-90 LR, 304 SS A403-WP304-W, WLD, BE, SCH 10S, B16.9 P9LS3HWDBE04B900
Tee
0.5 2 TEE, 304L SS A182-F304L, SW, CL3000, B16.11 PTES4XSWK3BH0000
2.5 12 TEE, 304 SS A403-WP304-W, WLD, BE, SCH 10S, B16.9 PTES3HWDBE04B900
Reducing Tee
0.75 2 0.5 1.5 RED TEE, 304L SS A182-F304L, SW, CL3000, B16.11 PRTS4XSWK3BH0000
3 4 0.5 2 RED TEE, 304 SS A403-WP304-W, WLD, BE, SCH 10S x SCH PRTS3HWDBE0408B9
40S, B16.9
3 12 2.5 10 RED TEE, 304 SS A403-WP304-W, WLD, BE, SCH 10S x SCH PRTS3HWDBE0404B9
10S, B16.9
Concentric Reducer
3 4 0.5 2 RED CON, 304 SS A403-WP304-W, WLD, BE, SCH 10S x SCH PRCS3HWDBE0408B9
40S, B16.9
3 12 2.5 10 RED CON, 304 SS A403-WP304-W, WLD, BE, SCH 10S x SCH PRCS3HWDBE0404B9
10S, B16.9
Eccentric Reducer
3 4 0.5 2 RED ECC, 304 SS A403-WP304-W, WLD, BE, SCH 10S x SCH PRES3HWDBE0408B9
40S, B16.9
3 12 2.5 10 RED ECC, 304 SS A403-WP304-W, WLD, BE, SCH 10S x SCH PRES3HWDBE0404B9
10S, B16.9
Sockolet
2.5 12 0.5 2 SOCKOLET, 304L SS A182-F304L, CL3000, SW, B16.11, PLSS4XK30000S101
HDR/BRN, SP-97
FLANGES
Socket Weld Flange
0.5 2 FLG-SW, 304L SS A182-F304L, CL150, RF, SCH 40S, B16.5 PFSS4X15RF08B500
Slip On Flange
2.5 12 FLG-SLP ON, 304/304L SS A182-F304/F304L, CL150, RF, B16.5 PFPS1G15RF00B500
2.5 12 FLG-SLP ON, 304/304L SS A182-F304/F304L, CL150, FF, B16.5 PFPS1G15FF00B500 2
Grooved Adapter Flange
1 2 12 FLG-GRV ADP, DI A536-65-45-12, CL150, FF, MFR STD, PFAFAX15FF00M1VG
NITRILE-T GSK, VIC STYLE 741
Blind Flange
0.5 12 FLG-BLND, 304L SS A182-F304L, CL150, RF, B16.5 PFBS4X15RF00B500
GASKETS
Gasket
1 0.5 12 GASKET, ARAMID W/ NBR (BUNA-N) BINDER, FULL FACE, PGGGMGFF6115B5GB 2
125823 HIGHEST
119784 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
GASKETS
Flange Isolation Kit
1 1 12 INSL KIT, G-10 W/ NITRILE SEAL, FULL FACE, 3.2mm (1/8") PGKGQBFF8115B5W1 3
THK, CL150, B16.5, MYLAR SLEEVE, 2 3.2mm (1/8") THK G-10
GRE WSHRS, 2 3.2mm (1/8") THK THRU HARDENED CS
WSHRS
BOLTS
0.5 1 2 35 BLT-STUD, 304 SS A193-B8 CL. 2, W/ 2 HVY HEX NUTS, 304 PB1J3BS81AW00001
SS A194-8, B1.1, DIA (IMP) x LEN (IMP)
VALVES
Check Valve
0.5 2 VLV-CHK, 304L SS A351-CF3, CL800, SW, B16.11, MFR STD, PVCS5D80SWC02A07
SWING, API 602, BC, STD PORT, API 602 TRIM 8, API 602
BOLTING, NON-ASB
3 12 VLV-CHK, 304L SS A351-CF3, CL150, RF, B16.5, B16.10, PVCS5D15RFAA29L2
SWING, API 594, BC, API 594 TRIM 12, MFR STD BOLTS,
NON-ASB
Ball Valve
0.5 2 VLV-BALL, 304L SS A351-CF3, CL800, SW, B16.11, MFR STD, PVBS5D80SWA1Z320
3-PC SO BOLTED, FLOATING, API 608, BI-DIR, 1XRED PORT,
316 SS TRIM, RTFE ST, FG GSK, FIRE-TESTED API 607, LO
W/ LOCK, NON-ASB
1 0.5 6 VLV-BALL, 304L SS A351-CF3, CL150, RF, B16.5, B16.10 PVBS5D15RFAL1A7J 2
LONG, SPLIT BODY, FLOATING, API 608, BI-DIR, FULL PORT,
316 SS TRIM, RTFE ST, RTFE SEALS, FIRE-TESTED API 607,
LO W/ LOCK, NON-ASB
125823 HIGHEST
119784 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
90 Main Branch S1E0B
H 0.5 TE
E
A 0.75 RT TE
D
E 1 RT RT TE
R
1.5 RT RT RT TE
2 LS LS LS LS TE
3 LS LS LS LS RT TE
0.5 0.75 1 1.5 2 3 4 6 8 10 12
BRANCH (NPS)
Legend
RT REDUCING TEE
TE TEE
ZS STUB-IN
125823 HIGHEST
119784 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
Job Name: INGENIERÍA DE DETALLES Y COMPRAS Class: SME0L Date: 26-Sep-22
5TO MOLINO DE BOLAS

Design For Vacuum: NO Flange Material: ASTM A182 304L
Corrosion Allowance: 0.0" Gasket Material: O-RING BUNA N
Flange Facing: RING JOINT Valve Material: ASTM A351 CF8M
Heat Treatment: --
NDE: PER ASME B31.3
Service(s)
HP Hydraulic Oil (MP) LM Lubrication Oil (MP)
Not Required
NPS: 0.5 - 2
38 3000

NPS 0.5 0.75 1 1.5 2
OD (in) 0.840 1.050 1.315 1.900 2.375
SCHEDULE 80S 80S 80S 80S 80S
W.T. (in) 0.147 0.154 0.179 0.200 0.218
General Notes
120406 HIGHEST
119783 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
PIPE
Pipe
0.5 2 PIPE, 304L SS A312-TP304L, SMLS, BE, SCH 80S, B36.19M, PPPS5ASMBE11B8S1
SNGL RANDOM LGTHS
NIPPLES / SWAGES
Nipple
0.5 2 NIP, 304/304L SS A312-TP304/304L, SMLS, BE x ENPT, SCH PNPS1USMBM15A7L4
160, A733, 4"
FITTINGS
Cap
1 0.5 2 CAP, 304L SS A403-WP304L-S, SMLS, BE, SCH 80S, B16.9 PCAS5NSMBE11B900
45 Degree LR Elbow
0.5 2 EL-45 LR, 304L SS A403-WP304L-S, SMLS, BE, SCH 80S, P4LS5NSMBE11B900
B16.9
90 Degree LR Elbow
0.5 2 EL-90 LR, 304L SS A403-WP304L-S, SMLS, BE, SCH 80S, P9LS5NSMBE11B900
B16.9
Tee
0.5 2 TEE, 304L SS A403-WP304L-S, SMLS, BE, SCH 80S, B16.9 PTES5NSMBE11B900
Reducing Tee
0.75 2 0.5 1.5 RED TEE, 304L SS A403-WP304L-S, SMLS, BE, SCH 80S x PRTS5NSMBE1111B9
SCH 80S, B16.9
Concentric Reducer
0.75 2 0.5 1.5 RED CON, 304L SS A403-WP304L-S, SMLS, BE, SCH 80S x PRCS5NSMBE1111B9
SCH 80S, B16.9
Eccentric Reducer
0.75 2 0.5 1.5 RED ECC, 304L SS A403-WP304L-S, SMLS, BE, SCH 80S x PRES5NSMBE1111B9
SCH 80S, B16.9
FLANGES
Weld Neck Flange
0.5 2 FLG-WN, 304L SS A182-F304L, 3000 PSIG, FF W/ O-RING PFWS4XSKF111JD00
GRV, SCH 80S, SAE CODE 61
0.5 2 FLG-WN, 304L SS A182-F304L, 3000 PSIG, FF, SCH 80S, SAE PFWS4XSKFF11JD00 2
CODE 61
1 0.5 2 FLG-WN, 304L SS A182-F304L, 3000 PSIG, FF W/ O-RING PFWS4XSKF211JD00 3
GRV, SPLIT, SCH 80S, SAE CODE 61
GASKETS
Gasket Hardware Kit
1 0.5 2 HARDWARE KIT FOR SAE CODE 61 FLANGES PER SAE MSPGGWNS4XSKZZZZ
J518, WITH SS BOLTS AND BUNA-O-RING, TYPE BKA DMIC
1 0.5 2 HARDWARE KIT FOR SAE CODE 61 SPLIT FLANGES PER MSPGGWNS4XSK1ZZZ 2
SAE J518, WITH SS BOLTS AND BUNA-O-RING, TYPE BKA
DMIC
120406 HIGHEST
119783 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
90 Main Branch SME0L
H 0.5 TE
E
A 0.75 RT TE
D
E 1 RT RT TE
R
1.25 RT RT RT TE
1.5 RT RT RT RT TE
2 RT RT RT RT RT TE
0.5 0.75 1 1.25 1.5 2
BRANCH (NPS)
Legend
RT REDUCING TEE
TE TEE
120406 HIGHEST
119783 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
Job Name: INGENIERÍA DE DETALLES Y COMPRAS Class: SPE0L Date: 26-Sep-22
5TO MOLINO DE BOLAS

Design For Vacuum: NO Flange Material: ASTM A182 304L
Corrosion Allowance: 0.0 Gasket Material: O-RING BUNA N
Flange Facing: RING JOINT Valve Material: ASTM A351 CF8M
Heat Treatment: --
NDE: PER ASME B31.3
Service(s)
HG Grease (HP) HO Hydraulic Oil (HP)
Not Required
NPS: 0.5 - 2
38 6000

NPS 0.5 0.75 1 1.5 2
OD (in) 0.840 1.050 1.315 1.900 2.375
SCHEDULE XXS XXS XXS XXS XXS
W.T. (in) 0.294 0.308 0.358 0.400 0.436
General Notes
119785 HIGHEST
118629 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
PIPE
Pipe
0.5 2 PIPE, 304L SS A312-TP304L, SMLS, BE, XXS, B36.10M, SNGL PPPS5ASMBEXXB7S1
RANDOM LGTHS
FITTINGS
45 Degree LR Elbow
0.5 2 EL-45 LR, 304L SS A403-WP304L-S, SMLS, BE, XXS, B16.9 P4LS5NSMBEXXB900
90 Degree LR Elbow
0.5 2 EL-90 LR, 304L SS A403-WP304L-S, SMLS, BE, XXS, B16.9 P9LS5NSMBEXXB900
Tee
0.5 2 TEE, 304L SS A403-WP304L-S, SMLS, BE, XXS, B16.9 PTES5NSMBEXXB900
Reducing Tee
0.75 2 0.5 1.5 RED TEE, 304L SS A403-WP304L-S, SMLS, BE, XXS x XXS, PRTS5NSMBEXXXXB9
B16.9
Concentric Reducer
0.75 2 0.5 1.5 RED CON, 304L SS A403-WP304L-S, SMLS, BE, XXS x XXS, PRCS5NSMBEXXXXB9
B16.9
Eccentric Reducer
0.75 2 0.5 1.5 RED ECC, 304L SS A403-WP304L-S, SMLS, BE, XXS x XXS, PRES5NSMBEXXXXB9
B16.9
FLANGES
Weld Neck Flange
0.5 2 FLG-WN, 304L SS A182-F304L, 6000 PSIG, FF W/ O-RING PFWS4XSWF1XXJG00
GRV, XXS, SAE CODE 62
0.5 2 FLG-WN, 304L SS A182-F304L, 6000 PSIG, FF, XXS, SAE PFWS4XSWFFXXJG00 2
CODE 62
GASKETS
Gasket Hardware Kit
1 0.5 2 HARDWARE KIT FOR SAE CODE 62 FLANGES PER SAE MSPGGWNS4XSWZZZZ 2
J518, WITH SS BOLTS AND BUNA-O-RING, TYPE BKA DMIC
119785 HIGHEST
118629 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
5TO MOLINO DE BOLAS
90 Main Branch SPE0L
H 0.5 TE
E
A 0.75 RT TE
D
E 1 RT RT TE
R
1.25 RT RT RT TE
1.5 RT RT RT RT TE
2 RT RT RT RT RT TE
0.5 0.75 1 1.25 1.5 2
BRANCH (NPS)
Legend
RT REDUCING TEE
TE TEE
119785 HIGHEST
118629 CRAMIREZ
Document No: 26418-220-3PS-P000-00001
COLLAHUASI
VÁLVULAS
PRÓXIMA
REVISIÓN
Generado: CAC
Aprobado: MAV
12 ANEXO 5: DESCRIPCIÓN DE COMPRAS PARA BECHTEL STOCK CODES
Project Specification for Piping Purchase Descriptions Page: 2 of 55
Project Name: INGENIERÍA DE DETALLES Y COMPRAS 5TO MOLINO DE BOL
Bechtel Stock Code: Piping Material Class: Client Code:

MSPGGWNS4XSK1ZZZ SME0L
Short Description:
HARDWARE KIT FOR SAE CODE 61 SPLIT FLANGES PER SAE J518, WITH SS BOLTS AND BUNA-O-RING, TYPE BKA DMIC
Purchase Description:
HARDWARE KIT FOR SAE CODE 61 SPLIT FLANGES, PER SAE J518, WITH BUNA-O-RING, STAINLESS STEEL FASTENER MATERIAL, 3000
PSI, SOCKET HEAD KIT FOR CODE 61 4-BOLT, TYPE BKA DMIC OR APPROVED EQUAL.

MSPGGWNS4XSKZZZZ SME0L
Short Description:
HARDWARE KIT FOR SAE CODE 61 FLANGES PER SAE J518, WITH SS BOLTS AND BUNA-O-RING, TYPE BKA DMIC
HARDWARE KIT FOR SAE CODE 61 FLANGES, PER SAE J518, WITH BUNA-O-RING, STAINLESS STEEL FASTENER MATERIAL, 3000 PSI,
SOCKET HEAD KIT FOR CODE 61 4-BOLT, TYPE BKA DMIC OR APPROVED EQUAL.

MSPGGWNS4XSWZZZZ SPE0L
Short Description:
HARDWARE KIT FOR SAE CODE 62 FLANGES PER SAE J518, WITH SS BOLTS AND BUNA-O-RING, TYPE BKA DMIC
HARDWARE KIT FOR SAE CODE 62 FLANGES, PER SAE J518, WITH BUNA-O-RING, STAINLESS STEEL FASTENER MATERIAL, 6000 PSI,
SOCKET HEAD KIT FOR CODE 21 4-BOLT, TYPE BKA DMIC OR APPROVED EQUAL.

P3MPMGF1PERGM1U2 M2F0H2
Short Description:
EL-30 MIT, HDPE ISO 4427-PE100, FAB, PE, PN16, MFR STD, UL/FM
ELBOW - 30 DEGREE MITER, HIGH DENSITY POLYETHYLENE PER ISO 4427 DESIGNATION PE100, FABRICATED, PLAIN END(S), PN16,
DESIGN AND DIMENSIONS PER MANUFACTURER STANDARD, UL LISTED AND/OR FM APPROVED

P4BC1DE2BE2EB9BV C1E2R, C1E2V
Short Description:
EL-45 BND, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, BE, 9.53mm (0.375") NOM. WT, B16.9, 5D, W/O TAN, PFI ES-24
ELBOW - 45 DEGREE BEND, CARBON STEEL PER API 5L GRADE B-PSL2, ELECTRIC FUSION WELDED, DOUBLE BUTT, STRAIGHT SEAM,
BEVELED END(S), 9.53mm (0.375") NOMINAL WALL THICKNESS, DESIGN AND DIMENSIONS PER ASME B16.9, 5 DIAMETER BEND RADIUS,
WITHOUT TANGENTS, PER PFI ES-24

P4BC1DE2BE2EB9BX C1E2R, C1E2V
Short Description:
StockCode / Ident Count : 305 / 3392

Ident Data is Up to Date

P4BCDDERBESTB9BC L1E0VJ, L1E0VT
Short Description:
EL-45 BND, CS A53-B TYPE E, ERW, BE, STD, B16.9, 6.4mm (0.25") RUBBER LND, 3D, W/O TAN, PFI ES-24
ELBOW - 45 DEGREE BEND, CARBON STEEL PER ASTM A53 GRADE B TYPE E, ELECTRIC RESISTANCE WELDED, BEVELED END(S),
STANDARD WEIGHT, DESIGN AND DIMENSIONS PER ASME B16.9, 6.4mm (0.25") RUBBER LND, 3 DIAMETER BEND RADIUS, WITHOUT
TANGENTS, PER PFI ES-24

P4BCDDERBESTB9BD L1E0VJ, L1E0VT
Short Description:

P4BCDDERBESTB9BH L1E0VJ, L1E0VT
Short Description:

P4BCDDERBESTB9BJ L1E0VJ, L1E0VT
Short Description:

P4BCDDERBESTB9BV C1E2R, C1E2V
Short Description:
EL-45 BND, CS A53-B TYPE E, ERW, BE, STD, B16.9, 5D, W/O TAN, PFI ES-24
STANDARD WEIGHT, DESIGN AND DIMENSIONS PER ASME B16.9, 5 DIAMETER BEND RADIUS, WITHOUT TANGENTS, PER PFI ES-24


P4BCDDERBESTB9BX C1E2R, C1E2V
Short Description:

P4BCDDERBESTB9BY L1E0VT
Short Description:
EL-45 BND, CS A53-B TYPE E, ERW, BE, STD, B16.9, 25.4mm (1.0") CERAMIC RUBBER LND, 3D, W/O TAN, PFI ES-24
STANDARD WEIGHT, DESIGN AND DIMENSIONS PER ASME B16.9, 25.4mm (1.0") CERAMIC RUBBER LINED, 3 DIAMETER BEND RADIUS,

P4BCDDERBESTB9BZ L1E0VT
Short Description:

P4BCDFSMBE10B9BC L1E0VJ, L1E0VT
Short Description:
EL-45 BND, CS A53-B TYPE S, SMLS, BE, SCH 80, B16.9, 6.4mm (0.25") RUBBER LND, 3D, W/O TAN, PFI ES-24
ELBOW - 45 DEGREE BEND, CARBON STEEL PER ASTM A53 GRADE B TYPE S, SEAMLESS, BEVELED END(S), SCHEDULE 80, DESIGN AND
DIMENSIONS PER ASME B16.9, 6.4mm (0.25") RUBBER LND, 3 DIAMETER BEND RADIUS, WITHOUT TANGENTS, PER PFI ES-24

P4BCDFSMBE10B9BH L1E0VJ, L1E0VT
Short Description:

P4BCDFSMBE10B9BV C1E2R, C1E2V
Short Description:
EL-45 BND, CS A53-B TYPE S, SMLS, BE, SCH 80, B16.9, 5D, W/O TAN, PFI ES-24
DIMENSIONS PER ASME B16.9, 5 DIAMETER BEND RADIUS, WITHOUT TANGENTS, PER PFI ES-24


P4BCDFSMBE10B9BX C1E2R, C1E2V
Short Description:

P4ECDKSWK3BH0000 C1E2B
Short Description:
EL-45, CS A105, SW, CL3000, B16.11
ELBOW - 45 DEGREE, CARBON STEEL PER ASTM A105, SOCKET WELDING END(S), CLASS 3000, DESIGN AND DIMENSIONS PER ASME
B16.11

P4ECDLTFK3BH0000 C1F2A
Short Description:
EL-45, CS A105N, INPT, CL3000, B16.11
ELBOW - 45 DEGREE, CARBON STEEL PER ASTM A105, NORMALIZED, INTERNAL TAPER PIPE THREAD (NPT) END(S), CLASS 3000,
DESIGN AND DIMENSIONS PER ASME B16.11

P4EFERTF30B30000 C1E2A, C1E2R
Short Description:
EL-45, MI A197, INPT, CL300, B16.3
ELBOW - 45 DEGREE, MALLEABLE IRON PER ASTM A197, INTERNAL TAPER PIPE THREAD (NPT) END(S), CLASS 300, DESIGN AND
DIMENSIONS PER ASME B16.3

P4EFERTF30B3UA00 G1E1A
Short Description:
EL-45, MI A197, INPT, CL300, B16.3, GALV
DIMENSIONS PER ASME B16.3, GALVANIZED

P4ES4XSWK3BH0000 S1E0B
Short Description:
EL-45, 304L SS A182-F304L, SW, CL3000, B16.11
ELBOW - 45 DEGREE, 304L STAINLESS STEEL PER ASTM A182 GRADE F304L, SOCKET WELDING END(S), CLASS 3000, DESIGN AND


P4LCFGSMBE10B9RL L1E0VJ, L1E0VT
Short Description:
EL-45 LR, CS A234-WPB, SMLS, BE, SCH 80, B16.9, 6.4mm (0.25") RUBBER LND
ELBOW - 45 DEGREE LONG RADIUS, CARBON STEEL PER ASTM A234 GRADE WPB, SEAMLESS, BEVELED END(S), SCHEDULE 80, DESIGN
AND DIMENSIONS PER ASME B16.9, 6.4mm (0.25") RUBBER LND

P4LCFGSMBESTB900 C1E2V
Short Description:
EL-45 LR, CS A234-WPB, SMLS, BE, STD, B16.9
ELBOW - 45 DEGREE LONG RADIUS, CARBON STEEL PER ASTM A234 GRADE WPB, SEAMLESS, BEVELED END(S), STANDARD WEIGHT,

P4LCFGWDBE2EB900 C1E2A, C1E2R, C1E2V
Short Description:
EL-45 LR, CS A234-WPB, WLD, BE, 9.53mm (0.375") NOM. WT, B16.9
ELBOW - 45 DEGREE LONG RADIUS, CARBON STEEL PER ASTM A234 GRADE WPB, WELDED, BEVELED END(S), 9.53mm (0.375") NOMINAL
WALL THICKNESS, DESIGN AND DIMENSIONS PER ASME B16.9

P4LCFGWDBE2HB900 C1E2A
Short Description:

P4LCFGWDBESTB900 C1E2A, C1E2B, C1E2R, C1E2V, G1E1A
Short Description:
EL-45 LR, CS A234-WPB, WLD, BE, STD, B16.9
ELBOW - 45 DEGREE LONG RADIUS, CARBON STEEL PER ASTM A234 GRADE WPB, WELDED, BEVELED END(S), STANDARD WEIGHT,

P4LCFGWDBESTB9RL L1E0VJ, L1E0VT
Short Description:
EL-45 LR, CS A234-WPB, WLD, BE, STD, B16.9, 6.4mm (0.25") RUBBER LND
DESIGN AND DIMENSIONS PER ASME B16.9, 6.4mm (0.25") RUBBER LND


P4LCFGWDBESTB9RM L1E0VJ, L1E0VT
Short Description:

P4LCFGWDBESTB9RP L1E0VT
Short Description:
EL-45 LR, CS A234-WPB, WLD, BE, STD, B16.9, 25.4mm (1.0") CERAMIC RUBBER LND
DESIGN AND DIMENSIONS PER ASME B16.9, 25.4mm (1.0") CERAMIC RUBBER LINED

P4LCFHSMBESTB900 C1F2A
Short Description:
EL-45 LR, CS A234-WPB N, SMLS, BE, STD, B16.9
ELBOW - 45 DEGREE LONG RADIUS, CARBON STEEL PER ASTM A234 GRADE WPB, NORMALIZED, SEAMLESS, BEVELED END(S),
STANDARD WEIGHT, DESIGN AND DIMENSIONS PER ASME B16.9

P4LS3HWDBE04B900 S1E0B
Short Description:
EL-45 LR, 304 SS A403-WP304-W, WLD, BE, SCH 10S, B16.9
ELBOW - 45 DEGREE LONG RADIUS, 304 STAINLESS STEEL PER ASTM A403 GRADE WP304-W, WELDED, BEVELED END(S), SCHEDULE
10S, DESIGN AND DIMENSIONS PER ASME B16.9

P4LS5NSMBE11B900 SME0L
Short Description:
EL-45 LR, 304L SS A403-WP304L-S, SMLS, BE, SCH 80S, B16.9
ELBOW - 45 DEGREE LONG RADIUS, 304L STAINLESS STEEL PER ASTM A403 GRADE WP304L-S, SEAMLESS, BEVELED END(S), SCHEDULE

P4LS5NSMBEXXB900 SPE0L
Short Description:
EL-45 LR, 304L SS A403-WP304L-S, SMLS, BE, XXS, B16.9
ELBOW - 45 DEGREE LONG RADIUS, 304L STAINLESS STEEL PER ASTM A403 GRADE WP304L-S, SEAMLESS, BEVELED END(S), DOUBLE
EXTRA STRONG, DESIGN AND DIMENSIONS PER ASME B16.9


Short Description:

Short Description:
ELBOW - 60 DERGEE MITER, HIGH DENSITY POLYETHYLENE PER ISO 4427 DESIGNATION PE100, FABRICATED, PLAIN END(S), PN16,

P9BC1DE2BE2EB9BV C1E2R, C1E2V
Short Description:

P9BC1DE2BE2EB9BX C1E2R, C1E2V
Short Description:

P9BCDDERBESTB9BC L1E0VJ, L1E0VT
Short Description:


P9BCDDERBESTB9BD L1E0VJ, L1E0VT
Short Description:

P9BCDDERBESTB9BH L1E0VJ, L1E0VT
Short Description:

P9BCDDERBESTB9BJ L1E0VJ, L1E0VT
Short Description:

P9BCDDERBESTB9BV C1E2R, C1E2V
Short Description:

P9BCDDERBESTB9BX C1E2R, C1E2V
Short Description:


P9BCDDERBESTB9BY L1E0VT
Short Description:

P9BCDDERBESTB9BZ L1E0VT
Short Description:

P9BCDFSMBE10B9BC L1E0VJ, L1E0VT
Short Description:

P9BCDFSMBE10B9BH L1E0VJ, L1E0VT
Short Description:

P9BCDFSMBE10B9BV C1E2R, C1E2V
Short Description:

P9BCDFSMBE10B9BX C1E2R, C1E2V
Short Description:


P9ECDKSWK3BH0000 C1E2B
Short Description:
EL-90, CS A105, SW, CL3000, B16.11
ELBOW - 90 DEGREE, CARBON STEEL PER ASTM A105, SOCKET WELDING END(S), CLASS 3000, DESIGN AND DIMENSIONS PER ASME
B16.11

P9ECDLTFK3BH0000 C1F2A
Short Description:
EL-90, CS A105N, INPT, CL3000, B16.11
ELBOW - 90 DEGREE, CARBON STEEL PER ASTM A105, NORMALIZED, INTERNAL TAPER PIPE THREAD (NPT) END(S), CLASS 3000,

P9EFERTF30B30000 C1E2A, C1E2R
Short Description:
EL-90, MI A197, INPT, CL300, B16.3

P9EFERTF30B3UA00 G1E1A
Short Description:
EL-90, MI A197, INPT, CL300, B16.3, GALV

P9ES4XSWK3BH0000 S1E0B
Short Description:
EL-90, 304L SS A182-F304L, SW, CL3000, B16.11
ELBOW - 90 DEGREE, 304L STAINLESS STEEL PER ASTM A182 GRADE F304L, SOCKET WELDING END(S), CLASS 3000, DESIGN AND

P9LCFGSMBE10B900 C1E2V
Short Description:
EL-90 LR, CS A234-WPB, SMLS, BE, SCH 80, B16.9
AND DIMENSIONS PER ASME B16.9


P9LCFGSMBE10B9RL L1E0VJ, L1E0VT
Short Description:
EL-90 LR, CS A234-WPB, SMLS, BE, SCH 80, B16.9, 6.4mm (0.25") RUBBER LND

P9LCFGWDBE2EB900 C1E2A, C1E2R, C1E2V
Short Description:

P9LCFGWDBE2HB900 C1E2A
Short Description:

P9LCFGWDBESTB900 C1E2A, C1E2B, C1E2R, C1E2V, G1E1A
Short Description:
EL-90 LR, CS A234-WPB, WLD, BE, STD, B16.9

P9LCFGWDBESTB9RL L1E0VJ, L1E0VT
Short Description:

P9LCFGWDBESTB9RM L1E0VJ, L1E0VT
Short Description:


P9LCFGWDBESTB9RP L1E0VT
Short Description:
EL-90 LR, CS A234-WPB, WLD, BE, STD, B16.9, 25.4mm (1.0") CERAMIC RUBBER LND

P9LCFHSMBESTB900 C1F2A
Short Description:
EL-90 LR, CS A234-WPB N, SMLS, BE, STD, B16.9
ELBOW - 90 DEGREE LONG RADIUS, CARBON STEEL PER ASTM A234 GRADE WPB, NORMALIZED, SEAMLESS, BEVELED END(S),

P9LS3HWDBE04B900 S1E0B
Short Description:
EL-90 LR, 304 SS A403-WP304-W, WLD, BE, SCH 10S, B16.9
ELBOW - 90 DEGREE LONG RADIUS, 304 STAINLESS STEEL PER ASTM A403 GRADE WP304-W, WELDED, BEVELED END(S), SCHEDULE

P9LS5NSMBE11B900 SME0L
Short Description:
EL-90 LR, 304L SS A403-WP304L-S, SMLS, BE, SCH 80S, B16.9
ELBOW - 90 DEGREE LONG RADIUS, 304L STAINLESS STEEL PER ASTM A403 GRADE WP304L-S, SEAMLESS, BEVELED END(S), SCHEDULE

P9LS5NSMBEXXB900 SPE0L
Short Description:
EL-90 LR, 304L SS A403-WP304L-S, SMLS, BE, XXS, B16.9
ELBOW - 90 DEGREE LONG RADIUS, 304L STAINLESS STEEL PER ASTM A403 GRADE WP304L-S, SEAMLESS, BEVELED END(S), DOUBLE
EXTRA STRONG, DESIGN AND DIMENSIONS PER ASME B16.9

Short Description:


PADPMGMDPERGM1U2 M2F0H2
Short Description:
ADPT-FLG, HDPE ISO 4427-PE100, MOLD, PE, PN16, MFR STD, UL/FM
ADAPTER - FLANGE, HIGH DENSITY POLYETHYLENE PER ISO 4427 DESIGNATION PE100, MOLDED, PLAIN END(S), PN16, DESIGN AND
DIMENSIONS PER MANUFACTURER STANDARD, UL LISTED AND/OR FM APPROVED

PB1J3BS81AW00001 S1E0B
Short Description:
BLT-STUD, 304 SS A193-B8 CL. 2, W/ 2 HVY HEX NUTS, 304 SS A194-8, B1.1, DIA (IMP) x LEN (IMP)
CONTINUOUS THREAD STUD BOLT, 304 STAINLESS STEEL PER ASTM A193 GRADE B8 CLASS 2, WITH 2 HEAVY HEX NUTS, 304
STAINLESS STEEL PER ASTM A194 GRADE 8, DESIGN PER ASME B1.1 WITH DIMENSIONAL RECOMMENDATIONS PER ASME B16.5/ASME
B16.47/MSS SP-44, DIAMETER (IMPERIAL) x LENGTH (IMPERIAL)

PB1JC5C2LAX00001 C1E2A, C1E2B, C1E2R, C1E2V, G1E1A,
L1E0VJ, L1E0VT
Short Description:
BLT-STUD, CR-1/5 MO A193-B7M, W/ 2 HVY HEX NUTS, CS A194-2H, 2 WSHRS, F436-1, B1.1, 8-UN, DIA (IMP) x LEN (IMP)
CONTINUOUS THREAD STUD BOLT, CHROME-1/5 MOLYBDENUM PER ASTM A193 GRADE B7M, WITH 2 HEAVY HEX NUTS, CARBON STEEL
PER ASTM A194 GRADE 2H, 2 WASHERS, ASTM F436 TYPE 1, DESIGN AND DIMENSIONS PER ASME B1.1 WITH 8-UN THREADS, DIAMETER
(IMPERIAL) x LENGTH (IMPERIAL)

PB1JC5C2LAY00001 C1E2A, C1E2B, C1E2R, C1E2V, C1F2A,
G1E1A, L1E0VJ, L1E0VT, M2F0H2
Short Description:
BLT-STUD, CR-1/5 MO A193-B7M, W/ 2 HVY HEX NUTS, CS A194-2H, 2 WSHRS, F436-1, B1.1, UNC, DIA (IMP) x LEN (IMP)
CONTINUOUS THREAD STUD BOLT, CHROME-1/5 MOLYBDENUM PER ASTM A193 GRADE B7M, WITH 2 HEAVY HEX NUTS, CARBON STEEL
PER ASTM A194 GRADE 2H, 2 WASHERS, ASTM F436 TYPE 1, DESIGN AND DIMENSIONS PER ASME B1.1 WITH UNC THREADS, DIAMETER
(IMPERIAL) x LENGTH (IMPERIAL)

PCACDKSWK3BH0000 C1E2B
Short Description:
CAP, CS A105, SW, CL3000, B16.11
CAP, CARBON STEEL PER ASTM A105, SOCKET WELDING END(S), CLASS 3000, DESIGN AND DIMENSIONS PER ASME B16.11


PCACDLTFK3BH0000 C1F2A
Short Description:
CAP, CS A105N, INPT, CL3000, B16.11
CAP, CARBON STEEL PER ASTM A105, NORMALIZED, INTERNAL TAPER PIPE THREAD (NPT) END(S), CLASS 3000, DESIGN AND

PCACFGSMBE10B900 C1E2V
Short Description:
CAP, CS A234-WPB, SMLS, BE, SCH 80, B16.9
CAP, CARBON STEEL PER ASTM A234 GRADE WPB, SEAMLESS, BEVELED END(S), SCHEDULE 80, DESIGN AND DIMENSIONS PER ASME
B16.9

PCACFGSMBE2EB900 C1E2A, C1E2R, C1E2V
Short Description:
CAP, CS A234-WPB, SMLS, BE, 9.53mm (0.375") NOM. WT, B16.9
CAP, CARBON STEEL PER ASTM A234 GRADE WPB, SEAMLESS, BEVELED END(S), 9.53mm (0.375") NOMINAL WALL THICKNESS, DESIGN

PCACFGSMBESTB900 C1E2A, C1E2B, C1E2R, C1E2V, G1E1A
Short Description:
CAP, CS A234-WPB, SMLS, BE, STD, B16.9
CAP, CARBON STEEL PER ASTM A234 GRADE WPB, SEAMLESS, BEVELED END(S), STANDARD WEIGHT, DESIGN AND DIMENSIONS PER
ASME B16.9

PCACFHSMBESTB900 C1F2A
Short Description:
CAP, CS A234-WPB N, SMLS, BE, STD, B16.9
CAP, CARBON STEEL PER ASTM A234 GRADE WPB, NORMALIZED, SEAMLESS, BEVELED END(S), STANDARD WEIGHT, DESIGN AND

PCAFERTF30B30000 C1E2A, C1E2R
Short Description:
CAP, MI A197, INPT, CL300, B16.3
CAP, MALLEABLE IRON PER ASTM A197, INTERNAL TAPER PIPE THREAD (NPT) END(S), CLASS 300, DESIGN AND DIMENSIONS PER ASME
B16.3


PCAFERTF30B3UA00 G1E1A
Short Description:
CAP, MI A197, INPT, CL300, B16.3, GALV
CAP, MALLEABLE IRON PER ASTM A197, INTERNAL TAPER PIPE THREAD (NPT) END(S), CLASS 300, DESIGN AND DIMENSIONS PER ASME
B16.3, GALVANIZED

PCAS4XSWK3BH0000 S1E0B
Short Description:
CAP, 304L SS A182-F304L, SW, CL3000, B16.11
CAP, 304L STAINLESS STEEL PER ASTM A182 GRADE F304L, SOCKET WELDING END(S), CLASS 3000, DESIGN AND DIMENSIONS PER
ASME B16.11

PCAS5NSMBE11B900 SME0L
Short Description:
CAP, 304L SS A403-WP304L-S, SMLS, BE, SCH 80S, B16.9
CAP, 304L STAINLESS STEEL PER ASTM A403 GRADE WP304L-S, SEAMLESS, BEVELED END(S), SCHEDULE 80S, DESIGN AND DIMENSIONS
PER ASME B16.9

PCPCDKSWK3BH0000 C1E2B
Short Description:
CPLG, CS A105, SW, CL3000, B16.11
COUPLING, CARBON STEEL PER ASTM A105, SOCKET WELDING END(S), CLASS 3000, DESIGN AND DIMENSIONS PER ASME B16.11

PCPCDLTFK3BH0000 C1F2A
Short Description:
CPLG, CS A105N, INPT, CL3000, B16.11
COUPLING, CARBON STEEL PER ASTM A105, NORMALIZED, INTERNAL TAPER PIPE THREAD (NPT) END(S), CLASS 3000, DESIGN AND

PCPFERTF30B30000 C1E2A, C1E2R, C1E2V
Short Description:
CPLG, MI A197, INPT, CL300, B16.3
COUPLING, MALLEABLE IRON PER ASTM A197, INTERNAL TAPER PIPE THREAD (NPT) END(S), CLASS 300, DESIGN AND DIMENSIONS PER
ASME B16.3


PCPFERTF30B3UA00 G1E1A
Short Description:
CPLG, MI A197, INPT, CL300, B16.3, GALV
COUPLING, MALLEABLE IRON PER ASTM A197, INTERNAL TAPER PIPE THREAD (NPT) END(S), CLASS 300, DESIGN AND DIMENSIONS PER
ASME B16.3, GALVANIZED

PCPS4XSWK3BH0000 S1E0B
Short Description:
CPLG, 304L SS A182-F304L, SW, CL3000, B16.11
COUPLING, 304L STAINLESS STEEL PER ASTM A182 GRADE F304L, SOCKET WELDING END(S), CLASS 3000, DESIGN AND DIMENSIONS
PER ASME B16.11

PFAFAX15FF00M1VG S1E0B
Short Description:
FLG-GRV ADP, DI A536-65-45-12, CL150, FF, MFR STD, NITRILE-T GSK, VIC STYLE 741
FLANGE - GROOVED ADAPTER, DUCTILE IRON PER ASTM A536 GRADE 65-45-12, CLASS 150, FLAT FACE, DESIGN AND DIMENSIONS PER
MANUFACTURER STANDARD, NITRILE GRADE T GASKET, VICTAULIC STYLE 741

PFBCD1CDFF00WJ00 C1E2A, C1E2R, C1E2V, L1E0VJ, L1E0VT
Short Description:
FLG-BLND, CS A36, CL. D, FF, AWWA C207
FLANGE - BLIND, CARBON STEEL PER ASTM A36, CLASS D, FLAT FACE, DESIGN AND DIMENSIONS PER AWWA C207

PFBCDK15FF00B500 C1E2A, C1E2R, C1E2V, L1E0VJ, L1E0VT
Short Description:
FLG-BLND, CS A105, CL150, FF, B16.5
FLANGE - BLIND, CARBON STEEL PER ASTM A105, CLASS 150, FLAT FACE, DESIGN AND DIMENSIONS PER ASME B16.5

PFBCDK15FF00B5G5 G1E1A
Short Description:
FLG-BLND, CS A105, CL150, FF, B16.5, GALV A153
FLANGE - BLIND, CARBON STEEL PER ASTM A105, CLASS 150, FLAT FACE, DESIGN AND DIMENSIONS PER ASME B16.5, GALVANIZED PER
ASTM A153


PFBCDK15FF00B5ZX M2F0H2
Short Description:
FLG-BLND, CS A105, CL150, FF, B16.5, EPX COATED
FLANGE - BLIND, CARBON STEEL PER ASTM A105, CLASS 150, FLAT FACE, DESIGN AND DIMENSIONS PER ASME B16.5, EPOXY COATED

PFBCDK15RF00B500 C1E2A, C1E2B, C1E2R, C1E2V, G1E1A
Short Description:
FLG-BLND, CS A105, CL150, RF, B16.5
FLANGE - BLIND, CARBON STEEL PER ASTM A105, CLASS 150, RAISED FACE, DESIGN AND DIMENSIONS PER ASME B16.5

PFBCDK15RF00B5G5 G1E1A
Short Description:
FLG-BLND, CS A105, CL150, RF, B16.5, GALV A153
FLANGE - BLIND, CARBON STEEL PER ASTM A105, CLASS 150, RAISED FACE, DESIGN AND DIMENSIONS PER ASME B16.5, GALVANIZED
PER ASTM A153

PFBCDK15RF00BV00 C1E2A
Short Description:
FLG-BLND, CS A105, CL150, RF, B16.47-A
FLANGE - BLIND, CARBON STEEL PER ASTM A105, CLASS 150, RAISED FACE, DESIGN AND DIMENSIONS PER ASME B16.47 SERIES A

PFBCDL15RF00B500 C1F2A
Short Description:
FLG-BLND, CS A105N, CL150, RF, B16.5
FLANGE - BLIND, CARBON STEEL PER ASTM A105, NORMALIZED, CLASS 150, RAISED FACE, DESIGN AND DIMENSIONS PER ASME B16.5

PFBS4X15RF00B500 S1E0B
Short Description:
FLG-BLND, 304L SS A182-F304L, CL150, RF, B16.5
FLANGE - BLIND, 304L STAINLESS STEEL PER ASTM A182 GRADE F304L, CLASS 150, RAISED FACE, DESIGN AND DIMENSIONS PER ASME
B16.5


PFGFAX15FFSYM2E7 M2F0H2
Short Description:
FLG-BKG, DI A536-65-45-12, CL150, FF, FM CL250, MFR STD, IPS, B16.5 BOLT PATTERN, EPX COATED, CONVLTD
FLANGE - BACKING, DUCTILE IRON PER ASTM A536 GRADE 65-45-12, CLASS 150, FLAT FACE, FM APPROVED PRESSURE CLASS 250,
DESIGN AND DIMENSIONS PER MANUFACTURER STANDARD, IRON PIPE SIZE PER ASME B36.10M, PER ASME B16.5 BOLT PATTERN,
EPOXY COATED, CONVOLUTED DESIGN

PFPCD1CDFF00WJ00 C1E2A, C1E2R, C1E2V, L1E0VJ, L1E0VT
Short Description:
FLG-SLP ON, CS A36, CL. D, FF, AWWA C207
FLANGE - SLIP-ON WELDING, CARBON STEEL PER ASTM A36, CLASS D, FLAT FACE, DESIGN AND DIMENSIONS PER AWWA C207

PFPCDK15FF00B500 C1E2A, C1E2R, C1E2V, C1F2A, G1E1A,
L1E0VJ, L1E0VT
Short Description:
FLG-SLP ON, CS A105, CL150, FF, B16.5
FLANGE - SLIP-ON WELDING, CARBON STEEL PER ASTM A105, CLASS 150, FLAT FACE, DESIGN AND DIMENSIONS PER ASME B16.5

PFPCDK15RF00B500 C1E2A, C1E2B, C1E2R, C1E2V, G1E1A,
L1E0VT
Short Description:
FLG-SLP ON, CS A105, CL150, RF, B16.5
FLANGE - SLIP-ON WELDING, CARBON STEEL PER ASTM A105, CLASS 150, RAISED FACE, DESIGN AND DIMENSIONS PER ASME B16.5

PFPS1G15FF00B500 S1E0B
Short Description:
FLG-SLP ON, 304/304L SS A182-F304/F304L, CL150, FF, B16.5
FLANGE - SLIP-ON WELDING, DUAL CERTIFIED 304/304L STAINLESS STEEL PER ASTM A182 GRADE F304/F304L, CLASS 150, FLAT FACE,

PFPS1G15RF00B500 S1E0B
Short Description:
FLG-SLP ON, 304/304L SS A182-F304/F304L, CL150, RF, B16.5
FLANGE - SLIP-ON WELDING, DUAL CERTIFIED 304/304L STAINLESS STEEL PER ASTM A182 GRADE F304/F304L, CLASS 150, RAISED
FACE, DESIGN AND DIMENSIONS PER ASME B16.5


PFRCD1CDFF00WJ00 L1E0VT
Short Description:
FLG-RED SLP ON, CS A36, CL. D, FF, AWWA C207
FLANGE - REDUCING SLIP-ON WELDING, CARBON STEEL PER ASTM A36, CLASS D, FLAT FACE, DESIGN AND DIMENSIONS PER AWWA
C207

PFRCDK15FF00B500 L1E0VJ
Short Description:
FLG-RED SLP ON, CS A105, CL150, FF, B16.5
FLANGE - REDUCING SLIP-ON WELDING, CARBON STEEL PER ASTM A105, CLASS 150, FLAT FACE, DESIGN AND DIMENSIONS PER ASME
B16.5

PFSCDK15RF10B500 C1E2B
Short Description:
FLG-SW, CS A105, CL150, RF, SCH 80, B16.5
FLANGE - SOCKET WELDING, CARBON STEEL PER ASTM A105, CLASS 150, RAISED FACE, SCHEDULE 80, DESIGN AND DIMENSIONS PER
ASME B16.5

PFSS4X15RF08B500 S1E0B
Short Description:
FLG-SW, 304L SS A182-F304L, CL150, RF, SCH 40S, B16.5
FLANGE - SOCKET WELDING, 304L STAINLESS STEEL PER ASTM A182 GRADE F304L, CLASS 150, RAISED FACE, SCHEDULE 40S, DESIGN

PFTCDK15FF00B500 C1E2A, C1E2R, C1E2V
Short Description:
FLG-THD, CS A105, CL150, FF, B16.5
FLANGE - THREADED, CARBON STEEL PER ASTM A105, CLASS 150, FLAT FACE, DESIGN AND DIMENSIONS PER ASME B16.5

PFTCDK15FF00B5G5 G1E1A
Short Description:
FLG-THD, CS A105, CL150, FF, B16.5, GALV A153
FLANGE - THREADED, CARBON STEEL PER ASTM A105, CLASS 150, FLAT FACE, DESIGN AND DIMENSIONS PER ASME B16.5,
GALVANIZED PER ASTM A153


PFTCDK15RF00B500 C1E2A, C1E2R, C1E2V
Short Description:
FLG-THD, CS A105, CL150, RF, B16.5
FLANGE - THREADED, CARBON STEEL PER ASTM A105, CLASS 150, RAISED FACE, DESIGN AND DIMENSIONS PER ASME B16.5

PFTCDK15RF00B5G5 G1E1A
Short Description:
FLG-THD, CS A105, CL150, RF, B16.5, GALV A153
FLANGE - THREADED, CARBON STEEL PER ASTM A105, CLASS 150, RAISED FACE, DESIGN AND DIMENSIONS PER ASME B16.5,
GALVANIZED PER ASTM A153

PFTCDL15RF00B500 C1F2A
Short Description:
FLG-THD, CS A105N, CL150, RF, B16.5
FLANGE - THREADED, CARBON STEEL PER ASTM A105, NORMALIZED, CLASS 150, RAISED FACE, DESIGN AND DIMENSIONS PER ASME
B16.5

PFWCDK15RF10B500 C1E2V
Short Description:
FLG-WN, CS A105, CL150, RF, SCH 80, B16.5
FLANGE - WELDING NECK, CARBON STEEL PER ASTM A105, CLASS 150, RAISED FACE, SCHEDULE 80, DESIGN AND DIMENSIONS PER
ASME B16.5

PFWCDK15RF2HBV00 C1E2A
Short Description:
FLG-WN, CS A105, CL150, RF, 12.70mm (0.500") NOM. WT, B16.47-A
FLANGE - WELDING NECK, CARBON STEEL PER ASTM A105, CLASS 150, RAISED FACE, 12.70mm (0.500") NOMINAL WALL THICKNESS,
DESIGN AND DIMENSIONS PER ASME B16.47 SERIES A

PFWCDK15RFSTB500 C1E2V
Short Description:
FLG-WN, CS A105, CL150, RF, STD, B16.5
FLANGE - WELDING NECK, CARBON STEEL PER ASTM A105, CLASS 150, RAISED FACE, STANDARD WEIGHT, DESIGN AND DIMENSIONS
PER ASME B16.5


PFWCDK15RFSTBV00 C1E2A
Short Description:
FLG-WN, CS A105, CL150, RF, STD, B16.47-A
FLANGE - WELDING NECK, CARBON STEEL PER ASTM A105, CLASS 150, RAISED FACE, STANDARD WEIGHT, DESIGN AND DIMENSIONS
PER ASME B16.47 SERIES A

PFWS4XSKF111JD00 SME0L
Short Description:
FLG-WN, 304L SS A182-F304L, 3000 PSIG, FF W/ O-RING GRV, SCH 80S, SAE CODE 61
FLANGE - WELDING NECK, 304L STAINLESS STEEL PER ASTM A182 GRADE F304L, 3000 PSIG, FLAT FACE WITH O-RING GROOVE,
SCHEDULE 80S, DESIGN AND DIMENSIONS PER SAE J518-1 CODE 61

PFWS4XSKF211JD00 SME0L
Short Description:
FLG-WN, 304L SS A182-F304L, 3000 PSIG, FF W/ O-RING GRV, SPLIT, SCH 80S, SAE CODE 61
FLANGE - WELDING NECK, 304L STAINLESS STEEL PER ASTM A182 GRADE F304L, 3000 PSIG, FLAT FACE WITH O-RING GROOVE, SPLIT,
SCHEDULE 80S, DESIGN AND DIMENSIONS PER SAE J518-1 CODE 61

PFWS4XSKFF11JD00 SME0L
Short Description:
FLG-WN, 304L SS A182-F304L, 3000 PSIG, FF, SCH 80S, SAE CODE 61
FLANGE - WELDING NECK, 304L STAINLESS STEEL PER ASTM A182 GRADE F304L, 3000 PSIG, FLAT FACE, SCHEDULE 80S, DESIGN AND
DIMENSIONS PER SAE J518-1 CODE 61

PFWS4XSWF1XXJG00 SPE0L
Short Description:
FLG-WN, 304L SS A182-F304L, 6000 PSIG, FF W/ O-RING GRV, XXS, SAE CODE 62
FLANGE - WELDING NECK, 304L STAINLESS STEEL PER ASTM A182 GRADE F304L, 6000 PSIG, FLAT FACE WITH O-RING GROOVE,
DOUBLE EXTRA STRONG, DESIGN AND DIMENSIONS PER SAE J518-2 CODE 62

PFWS4XSWFFXXJG00 SPE0L
Short Description:
FLG-WN, 304L SS A182-F304L, 6000 PSIG, FF, XXS, SAE CODE 62
FLANGE - WELDING NECK, 304L STAINLESS STEEL PER ASTM A182 GRADE F304L, 6000 PSIG, FLAT FACE, DOUBLE EXTRA STRONG,
DESIGN AND DIMENSIONS PER SAE J518-2 CODE 62


PGGGEASW8515B5A1 C1F2A, M2F0H2
Short Description:
GASKET, 316L SS-PTFE, SPIRAL WOUND, 3.2mm (1/8") THK, 316L SS INNER RING, 316L SS OUTER RING, CL150, B16.5, B16.20
GASKET, 316L STAINLESS STEEL WINDING, POLYTETRAFLUOROETHYLENE (PTFE) FILLED, SPIRAL WOUND TYPE, 3.2mm (1/8") THICK,
316L STAINLESS STEEL INNER RING, 316L STAINLESS STEEL OUTER CENTERING RING, CLASS 150, FOR FLANGE CONNECTIONS PER
ASME B16.5, DESIGN AND DIMENSIONS PER ASME B16.20

PGGGMGFF6115B5GB C1E2A, C1E2R, C1E2V, G1E1A, S1E0B
Short Description:
GASKET, ARAMID W/ NBR (BUNA-N) BINDER, FULL FACE, 1.6mm (1/16") THK, CL150, B16.5, B16.21, BLUE-GARD 3000
GASKET, ARAMID FIBER WITH NITRILE BUTADIENE RUBBER (NBR/BUNA-N) BINDER, FULL FACE TYPE, 1.6mm (1/16") THICK, CLASS 150,
FOR FLANGE CONNECTIONS PER ASME B16.5, DESIGN AND DIMENSIONS PER ASME B16.21, GARLOCK BLUE-GARD 3000

PGGGMGFF8115B5GB C1E2A, C1E2R, C1E2V, G1E1A, L1E0VJ,
L1E0VT
Short Description:
GASKET, ARAMID W/ NBR (BUNA-N) BINDER, FULL FACE, 3.2mm (1/8") THK, CL150, B16.5, B16.21, BLUE-GARD 3000
GASKET, ARAMID FIBER WITH NITRILE BUTADIENE RUBBER (NBR/BUNA-N) BINDER, FULL FACE TYPE, 3.2mm (1/8") THICK, CLASS 150,

PGGGMGFF81CDCDGB C1E2A, C1E2R, C1E2V, L1E0VJ, L1E0VT
Short Description:
GASKET, ARAMID W/ NBR (BUNA-N) BINDER, FULL FACE, 3.2mm (1/8") THK, CL. D, AWWA C207 CL. D, B16.21, BLUE-GARD 3000
GASKET, ARAMID FIBER WITH NITRILE BUTADIENE RUBBER (NBR/BUNA-N) BINDER, FULL FACE TYPE, 3.2mm (1/8") THICK, CLASS D, FOR
FLANGE CONNECTIONS PER AWWA C207 CLASS D, DESIGN AND DIMENSIONS PER ASME B16.21, GARLOCK BLUE-GARD 3000

PGGGMGFR6115B5GB C1E2A, C1E2B, C1E2R, C1E2V, G1E1A,
S1E0B
Short Description:
GASKET, ARAMID W/ NBR (BUNA-N) BINDER, FLAT RING, 1.6mm (1/16") THK, CL150, B16.5, B16.21, BLUE-GARD 3000
GASKET, ARAMID FIBER WITH NITRILE BUTADIENE RUBBER (NBR/BUNA-N) BINDER, FLAT RING TYPE, 1.6mm (1/16") THICK, CLASS 150,


PGGGMGFR8115B5GB C1E2A, C1E2B, C1E2R, C1E2V, G1E1A,
L1E0VJ, L1E0VT
Short Description:
GASKET, ARAMID W/ NBR (BUNA-N) BINDER, FLAT RING, 3.2mm (1/8") THK, CL150, B16.5, B16.21, BLUE-GARD 3000

PGGGMGFR8115BNGB C1E2A
Short Description:
GASKET, ARAMID W/ NBR (BUNA-N) BINDER, FLAT RING, 3.2mm (1/8") THK, CL150, B16.47-A, B16.21, BLUE-GARD 3000
FOR FLANGE CONNECTIONS PER ASME B16.47 SERIES A, DESIGN AND DIMENSIONS PER ASME B16.21, GARLOCK BLUE-GARD 3000

PGKGQBFF8115B5W1 S1E0B
Short Description:
INSL KIT, G-10 W/ NITRILE SEAL, FULL FACE, 3.2mm (1/8") THK, CL150, B16.5, MYLAR SLEEVE, 2 3.2mm (1/8") THK G-10 GRE WSHRS, 2
3.2mm (1/8") THK THRU HARDENED CS WSHRS
FLANGE - ISOLATION KIT, G-10 EPOXY GLASS WITH NITRILE SEAL RING, FULL FACE TYPE, 3.2mm (1/8") THICK, CLASS 150, FOR FLANGE
CONNECTIONS PER ASME B16.5, ONE FULL LENGTH MYLAR ISOLATING SLEEVE PER BOLT, TWO 3.2mm (1/8") THICK G-10 GLASS
REINFORCED EPOXY ISOLATING WASHERS PER BOLT, TWO 3.2mm (1/8") THICK THROUGH-HARDENED CARBON STEEL CIRCULAR
WASHERS PER BOLT

PLSCDKK30000S101 C1E2B
Short Description:
SOCKOLET, CS A105, CL3000, SW, B16.11, HDR/BRN, SP-97
INTEGRALLY REINF. BRANCH FITTING - SOCKOLET OR EQUAL, CARBON STEEL PER ASTM A105, CLASS 3000, SOCKET WELDING
OUTLET, ENDS PER ASME B16.11, HEADER BY BRANCH SIZE, DESIGN AND DIMENSIONS PER MSS SP-97

PLSS4XK30000S101 S1E0B
Short Description:
SOCKOLET, 304L SS A182-F304L, CL3000, SW, B16.11, HDR/BRN, SP-97
INTEGRALLY REINF. BRANCH FITTING - SOCKOLET OR EQUAL, 304L STAINLESS STEEL PER ASTM A182 GRADE F304L, CLASS 3000,
SOCKET WELDING OUTLET, ENDS PER ASME B16.11, HEADER BY BRANCH SIZE, DESIGN AND DIMENSIONS PER MSS SP-97

PLTCDKK30000T101 C1E2A, C1E2R, C1E2V, G1E1A
Short Description:
THREDOLET, CS A105, CL3000, INPT, B16.11, HDR/BRN, SP-97
INTEGRALLY REINF. BRANCH FITTING - THREDOLET OR EQUAL, CARBON STEEL PER ASTM A105, CLASS 3000, INTERNAL TAPER PIPE
THREAD (NPT) OUTLET, ENDS PER ASME B16.11, HEADER BY BRANCH SIZE, DESIGN AND DIMENSIONS PER MSS SP-97


PLTCDLK30000T101 C1F2A
Short Description:
THREDOLET, CS A105N, CL3000, INPT, B16.11, HDR/BRN, SP-97
INTEGRALLY REINF. BRANCH FITTING - THREDOLET OR EQUAL, CARBON STEEL PER ASTM A105, NORMALIZED, CLASS 3000, INTERNAL
TAPER PIPE THREAD (NPT) OUTLET, ENDS PER ASME B16.11, HEADER BY BRANCH SIZE, DESIGN AND DIMENSIONS PER MSS SP-97

PLWCDK00ST10B131 L1E0VJ, L1E0VT
Short Description:
WELDOLET, CS A105, STD x SCH 80, BE, B16.25, HDR/BRN, B31.3, SP-97, MFR STD
INTEGRALLY REINF. BRANCH FITTING - WELDOLET OR EQUAL, CARBON STEEL PER ASTM A105, STANDARD WEIGHT x SCHEDULE 80,
BEVELED END OUTLET, ENDS PER ASME B16.25, HEADER BY BRANCH SIZE, DESIGN PER ASME B31.3, QUALIFIED TO MSS SP-97,
DIMENSIONS PER MANUFACTURER STANDARD

PLWCDL00STSTB101 C1F2A
Short Description:
WELDOLET, CS A105N, STD x STD, BE, B16.25, HDR/BRN, SP-97
INTEGRALLY REINF. BRANCH FITTING - WELDOLET OR EQUAL, CARBON STEEL PER ASTM A105, NORMALIZED, STANDARD WEIGHT x
STANDARD WEIGHT, BEVELED END OUTLET, ENDS PER ASME B16.25, HEADER BY BRANCH SIZE, DESIGN AND DIMENSIONS PER MSS
SP-97

PLWCFG00ST10B111 C1E2V
Short Description:
WELDOLET, CS A234-WPB, STD x SCH 80, BE, B16.25, HDR/BRN, B31.1, SP-97, MFR STD
INTEGRALLY REINF. BRANCH FITTING - WELDOLET OR EQUAL, CARBON STEEL PER ASTM A234 GRADE WPB, STANDARD WEIGHT x
SCHEDULE 80, BEVELED END OUTLET, ENDS PER ASME B16.25, HEADER BY BRANCH SIZE, DESIGN PER ASME B31.1, QUALIFIED TO MSS
SP-97, DIMENSIONS PER MANUFACTURER STANDARD

PNCCFGSMBMST10M9 C1E2A, C1E2R, C1E2V, G1E1A
Short Description:
SWG-CON, CS A234-WPB, SMLS, BE x ENPT, STD x SCH 80, SP-95
SWAGED NIPPLE - CONCENTRIC, CARBON STEEL PER ASTM A234 GRADE WPB, SEAMLESS, BEVELED END x EXTERNAL TAPER PIPE
THREAD (NPT) END, STANDARD WEIGHT x SCHEDULE 80, DESIGN AND DIMENSIONS PER MSS SP-95

PNCCFHSMBMSTXSM9 C1F2A
Short Description:
SWG-CON, CS A234-WPB N, SMLS, BE x ENPT, STD x XS, SP-95
SWAGED NIPPLE - CONCENTRIC, CARBON STEEL PER ASTM A234 GRADE WPB, NORMALIZED, SEAMLESS, BEVELED END x EXTERNAL
TAPER PIPE THREAD (NPT) END, STANDARD WEIGHT x EXTRA STRONG, DESIGN AND DIMENSIONS PER MSS SP-95


PNECFGSMBMST10M9 C1E2A, C1E2R, C1E2V, G1E1A
Short Description:
SWG-ECC, CS A234-WPB, SMLS, BE x ENPT, STD x SCH 80, SP-95
SWAGED NIPPLE - ECCENTRIC, CARBON STEEL PER ASTM A234 GRADE WPB, SEAMLESS, BEVELED END x EXTERNAL TAPER PIPE
THREAD (NPT) END, STANDARD WEIGHT x SCHEDULE 80, DESIGN AND DIMENSIONS PER MSS SP-95

PNECFHSMBMSTXSM9 C1F2A
Short Description:
SWG-ECC, CS A234-WPB N, SMLS, BE x ENPT, STD x XS, SP-95
SWAGED NIPPLE - ECCENTRIC, CARBON STEEL PER ASTM A234 GRADE WPB, NORMALIZED, SEAMLESS, BEVELED END x EXTERNAL
TAPER PIPE THREAD (NPT) END, STANDARD WEIGHT x EXTRA STRONG, DESIGN AND DIMENSIONS PER MSS SP-95

PNPCDFSMM3XSA7L3 C1F2A
Short Description:
NIP, CS A53-B TYPE S, SMLS, ENPT, XS, A733, 3"
NIPPLE, CARBON STEEL PER ASTM A53 GRADE B TYPE S, SEAMLESS, EXTERNAL TAPER PIPE THREAD (NPT) END(S), EXTRA STRONG,
DESIGN AND DIMENSIONS PER ASTM A733, 3" LONG

PNPCDFSMM3XSA7L6 C1F2A
Short Description:
NIP, CS A53-B TYPE S, SMLS, ENPT, XS, A733, 6"
NIPPLE, CARBON STEEL PER ASTM A53 GRADE B TYPE S, SEAMLESS, EXTERNAL TAPER PIPE THREAD (NPT) END(S), EXTRA STRONG,
DESIGN AND DIMENSIONS PER ASTM A733, 6" LONG

PNPS1USMBM15A7L4 SME0L
Short Description:
NIP, 304/304L SS A312-TP304/304L, SMLS, BE x ENPT, SCH 160, A733, 4"
NIPPLE, DUAL CERTIFIED 304/304L STAINLESS STEEL PER ASTM A312 GRADE TP304/304L, SEAMLESS, BEVELED END x EXTERNAL TAPER
PIPE THREAD (NPT) END, SCHEDULE 160, DESIGN AND DIMENSIONS PER ASTM A733, 4" LONG

PPPC1DE2BE2EB7D1 C1E2A, C1E2R, C1E2V
Short Description:
PIPE, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, BE, 9.53mm (0.375") NOM. WT, B36.10M, DBL RANDOM LGTHS
PIPE, CARBON STEEL PER API 5L GRADE B-PSL2, ELECTRIC FUSION WELDED, DOUBLE BUTT, STRAIGHT SEAM, BEVELED END(S),
9.53mm (0.375") NOMINAL WALL THICKNESS, DESIGN AND DIMENSIONS PER ASME B36.10M, DOUBLE RANDOM LENGTHS


PPPC1DE2BE2EB7RE L1E0VJ
Short Description:
PIPE, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, BE, 9.53mm (0.375") NOM. WT, B36.10M, 12.7mm (0.5") RUBBER LND, DBL RANDOM
LGTHS
9.53mm (0.375") NOMINAL WALL THICKNESS, DESIGN AND DIMENSIONS PER ASME B36.10M, 12.7mm (0.5") RUBBER LINED, DOUBLE
RANDOM LENGTHS

PPPC1DE2BE2HB7D1 C1E2A
Short Description:
PIPE, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, BE, 12.70mm (0.500") NOM. WT, B36.10M, DBL RANDOM LGTHS
12.70mm (0.500") NOMINAL WALL THICKNESS, DESIGN AND DIMENSIONS PER ASME B36.10M, DOUBLE RANDOM LENGTHS

PPPC1DE2BP2EB7D1 C1E2A, C1E2R, C1E2V
Short Description:
PIPE, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, BE x PE, 9.53mm (0.375") NOM. WT, B36.10M, DBL RANDOM LGTHS
PIPE, CARBON STEEL PER API 5L GRADE B-PSL2, ELECTRIC FUSION WELDED, DOUBLE BUTT, STRAIGHT SEAM, BEVELED END x PLAIN
END, 9.53mm (0.375") NOMINAL WALL THICKNESS, DESIGN AND DIMENSIONS PER ASME B36.10M, DOUBLE RANDOM LENGTHS

PPPC1DE2BP2EB7RE L1E0VJ
Short Description:
PIPE, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, BE x PE, 9.53mm (0.375") NOM. WT, B36.10M, 12.7mm (0.5") RUBBER LND, DBL RANDOM
LGTHS
END, 9.53mm (0.375") NOMINAL WALL THICKNESS, DESIGN AND DIMENSIONS PER ASME B36.10M, 12.7mm (0.5") RUBBER LINED, DOUBLE
RANDOM LENGTHS

PPPC1DE2BP2HB7D1 C1E2A
Short Description:
PIPE, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, BE x PE, 12.70mm (0.500") NOM. WT, B36.10M, DBL RANDOM LGTHS
END, 12.70mm (0.500") NOMINAL WALL THICKNESS, DESIGN AND DIMENSIONS PER ASME B36.10M, DOUBLE RANDOM LENGTHS

PPPC1DE2PE2EB7D1 C1E2A, C1E2R, C1E2V
Short Description:
PIPE, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, PE, 9.53mm (0.375") NOM. WT, B36.10M, DBL RANDOM LGTHS
PIPE, CARBON STEEL PER API 5L GRADE B-PSL2, ELECTRIC FUSION WELDED, DOUBLE BUTT, STRAIGHT SEAM, PLAIN END(S), 9.53mm
(0.375") NOMINAL WALL THICKNESS, DESIGN AND DIMENSIONS PER ASME B36.10M, DOUBLE RANDOM LENGTHS


PPPC1DE2PE2EB7RE L1E0VJ
Short Description:
PIPE, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, PE, 9.53mm (0.375") NOM. WT, B36.10M, 12.7mm (0.5") RUBBER LND, DBL RANDOM
LGTHS
(0.375") NOMINAL WALL THICKNESS, DESIGN AND DIMENSIONS PER ASME B36.10M, 12.7mm (0.5") RUBBER LINED, DOUBLE RANDOM
LENGTHS

PPPC1DE2PE2HB7D1 C1E2A
Short Description:
PIPE, CS API 5L-B-PSL2, EFW, DBL BTT, STRT SM, PE, 12.70mm (0.500") NOM. WT, B36.10M, DBL RANDOM LGTHS
(0.500") NOMINAL WALL THICKNESS, DESIGN AND DIMENSIONS PER ASME B36.10M, DOUBLE RANDOM LENGTHS

PPPCDDERBESTB7D1 C1E2A, C1E2B, C1E2R, C1E2V, C1F2A,
G1E1A
Short Description:
PIPE, CS A53-B TYPE E, ERW, BE, STD, B36.10M, DBL RANDOM LGTHS
PIPE, CARBON STEEL PER ASTM A53 GRADE B TYPE E, ELECTRIC RESISTANCE WELDED, BEVELED END(S), STANDARD WEIGHT, DESIGN
AND DIMENSIONS PER ASME B36.10M, DOUBLE RANDOM LENGTHS

PPPCDDERBESTB7RC L1E0VT
Short Description:
PIPE, CS A53-B TYPE E, ERW, BE, STD, B36.10M, 25.4mm (1.0") CERAMIC RUBBER LND, DBL RANDOM LGTHS
AND DIMENSIONS PER ASME B36.10M, 25.4mm (1.0") CERAMIC RUBBER LND, DOUBLE RANDOM LENGTHS

PPPCDDERBESTB7RD L1E0VJ, L1E0VT
Short Description:
PIPE, CS A53-B TYPE E, ERW, BE, STD, B36.10M, 6.4mm (0.25") RUBBER LND, DBL RANDOM LGTHS
AND DIMENSIONS PER ASME B36.10M, 6.4mm (0.25") RUBBER LINED, DOUBLE RANDOM LENGTHS

PPPCDDERBESTB7RE L1E0VJ, L1E0VT
Short Description:
PIPE, CS A53-B TYPE E, ERW, BE, STD, B36.10M, 12.7mm (0.5") RUBBER LND, DBL RANDOM LGTHS


PPPCDDERBPSTB7D1 C1E2A, C1E2B, C1E2R, C1E2V, C1F2A,
G1E1A
Short Description:
PIPE, CS A53-B TYPE E, ERW, BE x PE, STD, B36.10M, DBL RANDOM LGTHS
PIPE, CARBON STEEL PER ASTM A53 GRADE B TYPE E, ELECTRIC RESISTANCE WELDED, BEVELED END x PLAIN END, STANDARD
WEIGHT, DESIGN AND DIMENSIONS PER ASME B36.10M, DOUBLE RANDOM LENGTHS

PPPCDDERBPSTB7RC L1E0VT
Short Description:
PIPE, CS A53-B TYPE E, ERW, BE x PE, STD, B36.10M, 25.4mm (1.0") CERAMIC RUBBER LND, DBL RANDOM LGTHS
WEIGHT, DESIGN AND DIMENSIONS PER ASME B36.10M, 25.4mm (1.0") CERAMIC RUBBER LND, DOUBLE RANDOM LENGTHS

PPPCDDERBPSTB7RD L1E0VJ, L1E0VT
Short Description:
PIPE, CS A53-B TYPE E, ERW, BE x PE, STD, B36.10M, 6.4mm (0.25") RUBBER LND, DBL RANDOM LGTHS
WEIGHT, DESIGN AND DIMENSIONS PER ASME B36.10M, 6.4mm (0.25") RUBBER LINED, DOUBLE RANDOM LENGTHS

PPPCDDERBPSTB7RE L1E0VJ, L1E0VT
Short Description:
PIPE, CS A53-B TYPE E, ERW, BE x PE, STD, B36.10M, 12.7mm (0.5") RUBBER LND, DBL RANDOM LGTHS
WEIGHT, DESIGN AND DIMENSIONS PER ASME B36.10M, 12.7mm (0.5") RUBBER LINED, DOUBLE RANDOM LENGTHS

PPPCDDERPE2EB7RC L1E0VT
Short Description:
PIPE, CS A53-B TYPE E, ERW, PE, 9.53mm (0.375") NOM. WT, B36.10M, 25.4mm (1.0") CERAMIC RUBBER LND, DBL RANDOM LGTHS
PIPE, CARBON STEEL PER ASTM A53 GRADE B TYPE E, ELECTRIC RESISTANCE WELDED, PLAIN END(S), 9.53mm (0.375") NOMINAL WALL
THICKNESS, DESIGN AND DIMENSIONS PER ASME B36.10M, 25.4mm (1.0") CERAMIC RUBBER LND, DOUBLE RANDOM LENGTHS

PPPCDDERPE2EG1RC L1E0VT
Short Description:
PIPE, CS A53-B TYPE E, ERW, PE, 9.53mm (0.375") NOM. WT, NONSTD CONF B36.10M, 25.4mm (1.0") CERAMIC RUBBER LND, DBL RANDOM
LGTHS
PIPE, CARBON STEEL PER ASTM A53 GRADE B TYPE E, ELECTRIC RESISTANCE WELDED, PLAIN END(S), 9.53mm (0.375") NOMINAL WALL
THICKNESS, DESIGN AND DIMENSIONS FOR NON-STANDARD SIZES IN CONFORMANCE WITH ASME B36.10M, 25.4mm (1.0") CERAMIC
RUBBER LND, DOUBLE RANDOM LENGTHS


PPPCDDERPESTB7D1 C1E2A, C1E2B, C1E2R, C1E2V, C1F2A,
G1E1A
Short Description:
PIPE, CS A53-B TYPE E, ERW, PE, STD, B36.10M, DBL RANDOM LGTHS
PIPE, CARBON STEEL PER ASTM A53 GRADE B TYPE E, ELECTRIC RESISTANCE WELDED, PLAIN END(S), STANDARD WEIGHT, DESIGN

PPPCDDERPESTB7RC L1E0VT
Short Description:
PIPE, CS A53-B TYPE E, ERW, PE, STD, B36.10M, 25.4mm (1.0") CERAMIC RUBBER LND, DBL RANDOM LGTHS
AND DIMENSIONS PER ASME B36.10M, 25.4mm (1.0") CERAMIC RUBBER LND, DOUBLE RANDOM LENGTHS

PPPCDDERPESTB7RD L1E0VJ, L1E0VT
Short Description:
PIPE, CS A53-B TYPE E, ERW, PE, STD, B36.10M, 6.4mm (0.25") RUBBER LND, DBL RANDOM LGTHS

PPPCDDERPESTB7RE L1E0VJ, L1E0VT
Short Description:
PIPE, CS A53-B TYPE E, ERW, PE, STD, B36.10M, 12.7mm (0.5") RUBBER LND, DBL RANDOM LGTHS

PPPCDFSMBE10B7RS L1E0VJ, L1E0VT
Short Description:
PIPE, CS A53-B TYPE S, SMLS, BE, SCH 80, B36.10M, 6.4mm (0.25") RUBBER LND, SNGL RANDOM LGTHS
PIPE, CARBON STEEL PER ASTM A53 GRADE B TYPE S, SEAMLESS, BEVELED END(S), SCHEDULE 80, DESIGN AND DIMENSIONS PER
ASME B36.10M, 6.4mm (0.25") RUBBER LINED, SINGLE RANDOM LENGTHS

PPPCDFSMBE10B7S1 C1E2R, C1E2V
Short Description:
PIPE, CS A53-B TYPE S, SMLS, BE, SCH 80, B36.10M, SNGL RANDOM LGTHS
PIPE, CARBON STEEL PER ASTM A53 GRADE B TYPE S, SEAMLESS, BEVELED END(S), SCHEDULE 80, DESIGN AND DIMENSIONS PER
ASME B36.10M, SINGLE RANDOM LENGTHS


PPPCDFSMBM10B7S1 C1E2V
Short Description:
PIPE, CS A53-B TYPE S, SMLS, BE x ENPT, SCH 80, B36.10M, SNGL RANDOM LGTHS
PIPE, CARBON STEEL PER ASTM A53 GRADE B TYPE S, SEAMLESS, BEVELED END x EXTERNAL TAPER PIPE THREAD (NPT) END,
SCHEDULE 80, DESIGN AND DIMENSIONS PER ASME B36.10M, SINGLE RANDOM LENGTHS

PPPCDFSMBP10B7RS L1E0VJ, L1E0VT
Short Description:
PIPE, CS A53-B TYPE S, SMLS, BE x PE, SCH 80, B36.10M, 6.4mm (0.25") RUBBER LND, SNGL RANDOM LGTHS
PIPE, CARBON STEEL PER ASTM A53 GRADE B TYPE S, SEAMLESS, BEVELED END x PLAIN END, SCHEDULE 80, DESIGN AND DIMENSIONS
PER ASME B36.10M, 6.4mm (0.25") RUBBER LINED, SINGLE RANDOM LENGTHS

PPPCDFSMBP10B7S1 C1E2B
Short Description:
PIPE, CS A53-B TYPE S, SMLS, BE x PE, SCH 80, B36.10M, SNGL RANDOM LGTHS
PIPE, CARBON STEEL PER ASTM A53 GRADE B TYPE S, SEAMLESS, BEVELED END x PLAIN END, SCHEDULE 80, DESIGN AND DIMENSIONS
PER ASME B36.10M, SINGLE RANDOM LENGTHS

PPPCDFSMM310B7G4 G1E1A
Short Description:
PIPE, CS A53-B TYPE S, SMLS, ENPT, SCH 80, B36.10M, GALV, SNGL RANDOM LGTHS
PIPE, CARBON STEEL PER ASTM A53 GRADE B TYPE S, SEAMLESS, EXTERNAL TAPER PIPE THREAD (NPT) END(S), SCHEDULE 80,
DESIGN AND DIMENSIONS PER ASME B36.10M, GALVANIZED, SINGLE RANDOM LENGTHS

PPPCDFSMM310B7S1 C1E2A, C1E2R, C1E2V
Short Description:
PIPE, CS A53-B TYPE S, SMLS, ENPT, SCH 80, B36.10M, SNGL RANDOM LGTHS
PIPE, CARBON STEEL PER ASTM A53 GRADE B TYPE S, SEAMLESS, EXTERNAL TAPER PIPE THREAD (NPT) END(S), SCHEDULE 80,
DESIGN AND DIMENSIONS PER ASME B36.10M, SINGLE RANDOM LENGTHS

PPPCDFSMM3XSB7S1 C1F2A
Short Description:
PIPE, CS A53-B TYPE S, SMLS, ENPT, XS, B36.10M, SNGL RANDOM LGTHS
PIPE, CARBON STEEL PER ASTM A53 GRADE B TYPE S, SEAMLESS, EXTERNAL TAPER PIPE THREAD (NPT) END(S), EXTRA STRONG,
DESIGN AND DIMENSIONS PER ASME B36.10M, SINGLE RANDOM LENGTHS


PPPCDFSMPE10B7RS L1E0VJ, L1E0VT
Short Description:
PIPE, CS A53-B TYPE S, SMLS, PE, SCH 80, B36.10M, 6.4mm (0.25") RUBBER LND, SNGL RANDOM LGTHS
PIPE, CARBON STEEL PER ASTM A53 GRADE B TYPE S, SEAMLESS, PLAIN END(S), SCHEDULE 80, DESIGN AND DIMENSIONS PER ASME
B36.10M, 6.4mm (0.25") RUBBER LINED, SINGLE RANDOM LENGTHS

PPPCDFSMPE10B7S1 C1E2B, C1E2R
Short Description:
PIPE, CS A53-B TYPE S, SMLS, PE, SCH 80, B36.10M, SNGL RANDOM LGTHS
PIPE, CARBON STEEL PER ASTM A53 GRADE B TYPE S, SEAMLESS, PLAIN END(S), SCHEDULE 80, DESIGN AND DIMENSIONS PER ASME
B36.10M, SINGLE RANDOM LENGTHS

PPPPMGSMPERGM1UL M2F0H2
Short Description:
PIPE, HDPE ISO 4427-PE100, SMLS, PE, PN16, MFR STD, UL/FM
PIPE, HIGH DENSITY POLYETHYLENE PER ISO 4427 DESIGNATION PE100, SEAMLESS, PLAIN END(S), PN16, DESIGN AND DIMENSIONS
PER MANUFACTURER STANDARD, UL LISTED AND/OR FM APPROVED

PPPS5AERBE04B8D1 S1E0B
Short Description:
PIPE, 304L SS A312-TP304L, ERW, BE, SCH 10S, B36.19M, DBL RANDOM LGTHS
PIPE, 304L STAINLESS STEEL PER ASTM A312 GRADE TP304L, ELECTRIC RESISTANCE WELDED, BEVELED END(S), SCHEDULE 10S,
DESIGN AND DIMENSIONS PER ASME B36.19M, DOUBLE RANDOM LENGTHS

PPPS5AERBP04B8D1 S1E0B
Short Description:
PIPE, 304L SS A312-TP304L, ERW, BE x PE, SCH 10S, B36.19M, DBL RANDOM LGTHS
PIPE, 304L STAINLESS STEEL PER ASTM A312 GRADE TP304L, ELECTRIC RESISTANCE WELDED, BEVELED END x PLAIN END, SCHEDULE
10S, DESIGN AND DIMENSIONS PER ASME B36.19M, DOUBLE RANDOM LENGTHS

PPPS5AERPE04B8D1 S1E0B
Short Description:
PIPE, 304L SS A312-TP304L, ERW, PE, SCH 10S, B36.19M, DBL RANDOM LGTHS
PIPE, 304L STAINLESS STEEL PER ASTM A312 GRADE TP304L, ELECTRIC RESISTANCE WELDED, PLAIN END(S), SCHEDULE 10S, DESIGN


PPPS5ASMBE11B8S1 SME0L
Short Description:
PIPE, 304L SS A312-TP304L, SMLS, BE, SCH 80S, B36.19M, SNGL RANDOM LGTHS
PIPE, 304L STAINLESS STEEL PER ASTM A312 GRADE TP304L, SEAMLESS, BEVELED END(S), SCHEDULE 80S, DESIGN AND DIMENSIONS
PER ASME B36.19M, SINGLE RANDOM LENGTHS

PPPS5ASMBEXXB7S1 SPE0L
Short Description:
PIPE, 304L SS A312-TP304L, SMLS, BE, XXS, B36.10M, SNGL RANDOM LGTHS
PIPE, 304L STAINLESS STEEL PER ASTM A312 GRADE TP304L, SEAMLESS, BEVELED END(S), DOUBLE EXTRA STRONG, DESIGN AND
DIMENSIONS PER ASME B36.10M, SINGLE RANDOM LENGTHS

PPPS5ASMBP08B8S1 S1E0B
Short Description:
PIPE, 304L SS A312-TP304L, SMLS, BE x PE, SCH 40S, B36.19M, SNGL RANDOM LGTHS
PIPE, 304L STAINLESS STEEL PER ASTM A312 GRADE TP304L, SEAMLESS, BEVELED END x PLAIN END, SCHEDULE 40S, DESIGN AND
DIMENSIONS PER ASME B36.19M, SINGLE RANDOM LENGTHS

PPPS5ASMPE08B8S1 S1E0B
Short Description:
PIPE, 304L SS A312-TP304L, SMLS, PE, SCH 40S, B36.19M, SNGL RANDOM LGTHS
PIPE, 304L STAINLESS STEEL PER ASTM A312 GRADE TP304L, SEAMLESS, PLAIN END(S), SCHEDULE 40S, DESIGN AND DIMENSIONS PER
ASME B36.19M, SINGLE RANDOM LENGTHS

PR2CDKSWK3BH0000 C1E2B
Short Description:
RED CPLG, CS A105, SW, CL3000, B16.11
REDUCING COUPLING, CARBON STEEL PER ASTM A105, SOCKET WELDING END(S), CLASS 3000, DESIGN AND DIMENSIONS PER ASME
B16.11

PR2CDLTFK3BH0000 C1F2A
Short Description:
RED CPLG, CS A105N, INPT, CL3000, B16.11
REDUCING COUPLING, CARBON STEEL PER ASTM A105, NORMALIZED, INTERNAL TAPER PIPE THREAD (NPT) END(S), CLASS 3000,


PR2FERTF30B30000 C1E2A, C1E2R, C1E2V
Short Description:
RED CPLG, MI A197, INPT, CL300, B16.3
REDUCING COUPLING, MALLEABLE IRON PER ASTM A197, INTERNAL TAPER PIPE THREAD (NPT) END(S), CLASS 300, DESIGN AND

PR2FERTF30B3UA00 G1E1A
Short Description:
RED CPLG, MI A197, INPT, CL300, B16.3, GALV
REDUCING COUPLING, MALLEABLE IRON PER ASTM A197, INTERNAL TAPER PIPE THREAD (NPT) END(S), CLASS 300, DESIGN AND

PR2S4XSWK3BH0000 S1E0B
Short Description:
RED CPLG, 304L SS A182-F304L, SW, CL3000, B16.11
REDUCING COUPLING, 304L STAINLESS STEEL PER ASTM A182 GRADE F304L, SOCKET WELDING END(S), CLASS 3000, DESIGN AND

PRCCFGSMBEST10B8 L1E0VJ, L1E0VT
Short Description:
RED CON, CS A234-WPB, SMLS, BE, STD x SCH 80, B16.9, 6.4mm (0.25") RUBBER LND
REDUCER - CONCENTRIC, CARBON STEEL PER ASTM A234 GRADE WPB, SEAMLESS, BEVELED END(S), STANDARD WEIGHT x SCHEDULE
80, DESIGN AND DIMENSIONS PER ASME B16.9, 6.4mm (0.25") RUBBER LND

PRCCFGSMBEST10B9 C1E2V
Short Description:
RED CON, CS A234-WPB, SMLS, BE, STD x SCH 80, B16.9
REDUCER - CONCENTRIC, CARBON STEEL PER ASTM A234 GRADE WPB, SEAMLESS, BEVELED END(S), STANDARD WEIGHT x SCHEDULE
80, DESIGN AND DIMENSIONS PER ASME B16.9

PRCCFGWDBE2E2EB9 C1E2A, C1E2R, C1E2V
Short Description:
RED CON, CS A234-WPB, WLD, BE, 9.53mm (0.375") NOM. WT x 9.53mm (0.375") NOM. WT, B16.9
REDUCER - CONCENTRIC, CARBON STEEL PER ASTM A234 GRADE WPB, WELDED, BEVELED END(S), 9.53mm (0.375") NOMINAL WALL
THICKNESS x 9.53mm (0.375") NOMINAL WALL THICKNESS, DESIGN AND DIMENSIONS PER ASME B16.9


PRCCFGWDBE2ESTB9 C1E2A, C1E2R, C1E2V
Short Description:
RED CON, CS A234-WPB, WLD, BE, 9.53mm (0.375") NOM. WT x STD, B16.9
THICKNESS x STANDARD WEIGHT, DESIGN AND DIMENSIONS PER ASME B16.9

PRCCFGWDBE2H2EB9 C1E2A
Short Description:

PRCCFGWDBE2H2HB9 C1E2A
Short Description:

PRCCFGWDBEST10B9 C1E2B
Short Description:
RED CON, CS A234-WPB, WLD, BE, STD x SCH 80, B16.9
REDUCER - CONCENTRIC, CARBON STEEL PER ASTM A234 GRADE WPB, WELDED, BEVELED END(S), STANDARD WEIGHT x SCHEDULE

PRCCFGWDBESTSTB6 L1E0VT
Short Description:
RED CON, CS A234-WPB, WLD, BE, STD x STD, B16.9, 25.4mm (1.0") CERAMIC RUBBER LND
REDUCER - CONCENTRIC, CARBON STEEL PER ASTM A234 GRADE WPB, WELDED, BEVELED END(S), STANDARD WEIGHT x STANDARD
WEIGHT, DESIGN AND DIMENSIONS PER ASME B16.9, 25.4mm (1.0") CERAMIC RUBBER LINED

PRCCFGWDBESTSTB7 L1E0VJ, L1E0VT
Short Description:
RED CON, CS A234-WPB, WLD, BE, STD x STD, B16.9, 12.7mm (0.5") RUBBER LND
WEIGHT, DESIGN AND DIMENSIONS PER ASME B16.9, 12.7mm (0.5") RUBBER LND


PRCCFGWDBESTSTB8 L1E0VJ, L1E0VT
Short Description:
RED CON, CS A234-WPB, WLD, BE, STD x STD, B16.9, 6.4mm (0.25") RUBBER LND

PRCCFGWDBESTSTB9 C1E2A, C1E2B, C1E2R, C1E2V, G1E1A
Short Description:
RED CON, CS A234-WPB, WLD, BE, STD x STD, B16.9
WEIGHT, DESIGN AND DIMENSIONS PER ASME B16.9

PRCCFHSMBESTSTB9 C1F2A
Short Description:
RED CON, CS A234-WPB N, SMLS, BE, STD x STD, B16.9
REDUCER - CONCENTRIC, CARBON STEEL PER ASTM A234 GRADE WPB, NORMALIZED, SEAMLESS, BEVELED END(S), STANDARD
WEIGHT x STANDARD WEIGHT, DESIGN AND DIMENSIONS PER ASME B16.9

PRCPMGF1PERGRGU1 M2F0H2
Short Description:
RED CON, HDPE ISO 4427-PE100, FAB, PE, PN16 x PN16, MFR STD, UL/FM
REDUCER - CONCENTRIC, HIGH DENSITY POLYETHYLENE PER ISO 4427 DESIGNATION PE100, FABRICATED, PLAIN END(S), PN16 x
PN16, DESIGN AND DIMENSIONS PER MANUFACTURER STANDARD, UL LISTED AND/OR FM APPROVED

PRCS3HWDBE0404B9 S1E0B
Short Description:
RED CON, 304 SS A403-WP304-W, WLD, BE, SCH 10S x SCH 10S, B16.9
REDUCER - CONCENTRIC, 304 STAINLESS STEEL PER ASTM A403 GRADE WP304-W, WELDED, BEVELED END(S), SCHEDULE 10S x
SCHEDULE 10S, DESIGN AND DIMENSIONS PER ASME B16.9

PRCS3HWDBE0408B9 S1E0B
Short Description:
RED CON, 304 SS A403-WP304-W, WLD, BE, SCH 10S x SCH 40S, B16.9
REDUCER - CONCENTRIC, 304 STAINLESS STEEL PER ASTM A403 GRADE WP304-W, WELDED, BEVELED END(S), SCHEDULE 10S x


PRCS5NSMBE1111B9 SME0L
Short Description:
RED CON, 304L SS A403-WP304L-S, SMLS, BE, SCH 80S x SCH 80S, B16.9
REDUCER - CONCENTRIC, 304L STAINLESS STEEL PER ASTM A403 GRADE WP304L-S, SEAMLESS, BEVELED END(S), SCHEDULE 80S x

PRCS5NSMBEXXXXB9 SPE0L
Short Description:
RED CON, 304L SS A403-WP304L-S, SMLS, BE, XXS x XXS, B16.9
REDUCER - CONCENTRIC, 304L STAINLESS STEEL PER ASTM A403 GRADE WP304L-S, SEAMLESS, BEVELED END(S), DOUBLE EXTRA
STRONG x DOUBLE EXTRA STRONG, DESIGN AND DIMENSIONS PER ASME B16.9

PRECFGSMBEST10B8 L1E0VJ, L1E0VT
Short Description:
RED ECC, CS A234-WPB, SMLS, BE, STD x SCH 80, B16.9, 6.4mm (0.25") RUBBER LND
REDUCER - ECCENTRIC, CARBON STEEL PER ASTM A234 GRADE WPB, SEAMLESS, BEVELED END(S), STANDARD WEIGHT x SCHEDULE
80, DESIGN AND DIMENSIONS PER ASME B16.9, 6.4mm (0.25") RUBBER LND

PRECFGSMBEST10B9 C1E2V
Short Description:
RED ECC, CS A234-WPB, SMLS, BE, STD x SCH 80, B16.9
REDUCER - ECCENTRIC, CARBON STEEL PER ASTM A234 GRADE WPB, SEAMLESS, BEVELED END(S), STANDARD WEIGHT x SCHEDULE

PRECFGWDBE2E2EB9 C1E2A, C1E2R, C1E2V
Short Description:
RED ECC, CS A234-WPB, WLD, BE, 9.53mm (0.375") NOM. WT x 9.53mm (0.375") NOM. WT, B16.9
REDUCER - ECCENTRIC, CARBON STEEL PER ASTM A234 GRADE WPB, WELDED, BEVELED END(S), 9.53mm (0.375") NOMINAL WALL

PRECFGWDBE2ESTB9 C1E2A, C1E2R, C1E2V
Short Description:
RED ECC, CS A234-WPB, WLD, BE, 9.53mm (0.375") NOM. WT x STD, B16.9
THICKNESS x STANDARD WEIGHT, DESIGN AND DIMENSIONS PER ASME B16.9


PRECFGWDBE2H2EB9 C1E2A
Short Description:

PRECFGWDBE2H2HB9 C1E2A
Short Description:

PRECFGWDBEST10B9 C1E2B
Short Description:
RED ECC, CS A234-WPB, WLD, BE, STD x SCH 80, B16.9
REDUCER - ECCENTRIC, CARBON STEEL PER ASTM A234 GRADE WPB, WELDED, BEVELED END(S), STANDARD WEIGHT x SCHEDULE 80,

PRECFGWDBESTSTB6 L1E0VT
Short Description:
RED ECC, CS A234-WPB, WLD, BE, STD x STD, B16.9, 25.4mm (1.0") CERAMIC RUBBER LND
REDUCER - ECCENTRIC, CARBON STEEL PER ASTM A234 GRADE WPB, WELDED, BEVELED END(S), STANDARD WEIGHT x STANDARD
WEIGHT, DESIGN AND DIMENSIONS PER ASME B16.9, 25.4mm (1.0") CERAMIC RUBBER LINED

PRECFGWDBESTSTB7 L1E0VJ, L1E0VT
Short Description:
RED ECC, CS A234-WPB, WLD, BE, STD x STD, B16.9, 12.7mm (0.5") RUBBER LND

PRECFGWDBESTSTB8 L1E0VJ, L1E0VT
Short Description:
RED ECC, CS A234-WPB, WLD, BE, STD x STD, B16.9, 6.4mm (0.25") RUBBER LND


PRECFGWDBESTSTB9 C1E2A, C1E2B, C1E2R, C1E2V, G1E1A
Short Description:
RED ECC, CS A234-WPB, WLD, BE, STD x STD, B16.9
WEIGHT, DESIGN AND DIMENSIONS PER ASME B16.9

PRECFHSMBESTSTB9 C1F2A
Short Description:
RED ECC, CS A234-WPB N, SMLS, BE, STD x STD, B16.9
REDUCER - ECCENTRIC, CARBON STEEL PER ASTM A234 GRADE WPB, NORMALIZED, SEAMLESS, BEVELED END(S), STANDARD WEIGHT
x STANDARD WEIGHT, DESIGN AND DIMENSIONS PER ASME B16.9

PRECFKWDBE2ESTBR L1E0VT
Short Description:
RED ECC, CS A234-WPBW N, WLD, BE, 9.53mm (0.375") NOM. WT x STD, B16.9, SP-75, 25.4mm (1.0") CERAMIC RUBBER LND
REDUCER - ECCENTRIC, CARBON STEEL PER ASTM A234 GRADE WPBW, NORMALIZED, WELDED, BEVELED END(S), 9.53mm (0.375")
NOMINAL WALL THICKNESS x STANDARD WEIGHT, DESIGN PER ASME B16.9, DIMENSIONS PER MSS SP-75, 25.4mm (1.0") CERAMIC
RUBBER LINED

PREPMGF1PERGRGU1 M2F0H2
Short Description:
RED ECC, HDPE ISO 4427-PE100, FAB, PE, PN16 x PN16, MFR STD, UL/FM
REDUCER - ECCENTRIC, HIGH DENSITY POLYETHYLENE PER ISO 4427 DESIGNATION PE100, FABRICATED, PLAIN END(S), PN16 x PN16,

PRES3HWDBE0404B9 S1E0B
Short Description:
RED ECC, 304 SS A403-WP304-W, WLD, BE, SCH 10S x SCH 10S, B16.9
REDUCER - ECCENTRIC, 304 STAINLESS STEEL PER ASTM A403 GRADE WP304-W, WELDED, BEVELED END(S), SCHEDULE 10S x

PRES3HWDBE0408B9 S1E0B
Short Description:
RED ECC, 304 SS A403-WP304-W, WLD, BE, SCH 10S x SCH 40S, B16.9
REDUCER - ECCENTRIC, 304 STAINLESS STEEL PER ASTM A403 GRADE WP304-W, WELDED, BEVELED END(S), SCHEDULE 10S x

Document Number: 26418-220-3PS-P000-00001 Date: 10-Dic-21

PRES5NSMBE1111B9 SME0L
Short Description:
RED ECC, 304L SS A403-WP304L-S, SMLS, BE, SCH 80S x SCH 80S, B16.9
REDUCER - ECCENTRIC, 304L STAINLESS STEEL PER ASTM A403 GRADE WP304L-S, SEAMLESS, BEVELED END(S), SCHEDULE 80S x

PRES5NSMBEXXXXB9 SPE0L
Short Description:
RED ECC, 304L SS A403-WP304L-S, SMLS, BE, XXS x XXS, B16.9
REDUCER - ECCENTRIC, 304L STAINLESS STEEL PER ASTM A403 GRADE WP304L-S, SEAMLESS, BEVELED END(S), DOUBLE EXTRA
STRONG x DOUBLE EXTRA STRONG, DESIGN AND DIMENSIONS PER ASME B16.9

PRTCDKSWK3BH0000 C1E2B
Short Description:
RED TEE, CS A105, SW, CL3000, B16.11
REDUCING TEE, CARBON STEEL PER ASTM A105, SOCKET WELDING END(S), CLASS 3000, DESIGN AND DIMENSIONS PER ASME B16.11

PRTCDLTFK3BH0000 C1F2A
Short Description:
RED TEE, CS A105N, INPT, CL3000, B16.11
REDUCING TEE, CARBON STEEL PER ASTM A105, NORMALIZED, INTERNAL TAPER PIPE THREAD (NPT) END(S), CLASS 3000, DESIGN

PRTCFGSMBE1010B9 C1E2V
Short Description:
RED TEE, CS A234-WPB, SMLS, BE, SCH 80 x SCH 80, B16.9
REDUCING TEE, CARBON STEEL PER ASTM A234 GRADE WPB, SEAMLESS, BEVELED END(S), SCHEDULE 80 x SCHEDULE 80, DESIGN

PRTCFGWDBE2E2EB9 C1E2A, C1E2R, C1E2V
Short Description:
RED TEE, CS A234-WPB, WLD, BE, 9.53mm (0.375") NOM. WT x 9.53mm (0.375") NOM. WT, B16.9
REDUCING TEE, CARBON STEEL PER ASTM A234 GRADE WPB, WELDED, BEVELED END(S), 9.53mm (0.375") NOMINAL WALL THICKNESS x
9.53mm (0.375") NOMINAL WALL THICKNESS, DESIGN AND DIMENSIONS PER ASME B16.9


PRTCFGWDBE2ESTB9 C1E2A, C1E2R, C1E2V
Short Description:
RED TEE, CS A234-WPB, WLD, BE, 9.53mm (0.375") NOM. WT x STD, B16.9

PRTCFGWDBE2H2EB9 C1E2A
Short Description:

PRTCFGWDBE2H2HB9 C1E2A
Short Description:

PRTCFGWDBE2HSTB9 C1E2A
Short Description:
RED TEE, CS A234-WPB, WLD, BE, 12.70mm (0.500") NOM. WT x STD, B16.9

PRTCFGWDBEST10B8 L1E0VJ, L1E0VT
Short Description:
RED TEE, CS A234-WPB, WLD, BE, STD x SCH 80, B16.9, 6.4mm (0.25") RUBBER LND
REDUCING TEE, CARBON STEEL PER ASTM A234 GRADE WPB, WELDED, BEVELED END(S), STANDARD WEIGHT x SCHEDULE 80, DESIGN

PRTCFGWDBEST10B9 C1E2B, G1E1A
Short Description:
RED TEE, CS A234-WPB, WLD, BE, STD x SCH 80, B16.9
REDUCING TEE, CARBON STEEL PER ASTM A234 GRADE WPB, WELDED, BEVELED END(S), STANDARD WEIGHT x SCHEDULE 80, DESIGN


PRTCFGWDBESTSTB6 L1E0VT
Short Description:
RED TEE, CS A234-WPB, WLD, BE, STD x STD, B16.9, 25.4mm (1.0") CERAMIC RUBBER LND
REDUCING TEE, CARBON STEEL PER ASTM A234 GRADE WPB, WELDED, BEVELED END(S), STANDARD WEIGHT x STANDARD WEIGHT,

PRTCFGWDBESTSTB7 L1E0VJ, L1E0VT
Short Description:
RED TEE, CS A234-WPB, WLD, BE, STD x STD, B16.9, 12.7mm (0.5") RUBBER LND

PRTCFGWDBESTSTB8 L1E0VJ, L1E0VT
Short Description:
RED TEE, CS A234-WPB, WLD, BE, STD x STD, B16.9, 6.4mm (0.25") RUBBER LND

PRTCFGWDBESTSTB9 C1E2A, C1E2B, C1E2R, C1E2V, G1E1A
Short Description:
RED TEE, CS A234-WPB, WLD, BE, STD x STD, B16.9

PRTCFHSMBESTSTB9 C1F2A
Short Description:
RED TEE, CS A234-WPB N, SMLS, BE, STD x STD, B16.9
REDUCING TEE, CARBON STEEL PER ASTM A234 GRADE WPB, NORMALIZED, SEAMLESS, BEVELED END(S), STANDARD WEIGHT x

PRTFERTF30B30000 C1E2A, C1E2R
Short Description:
RED TEE, MI A197, INPT, CL300, B16.3
REDUCING TEE, MALLEABLE IRON PER ASTM A197, INTERNAL TAPER PIPE THREAD (NPT) END(S), CLASS 300, DESIGN AND DIMENSIONS
PER ASME B16.3


PRTFERTF30B3UA00 G1E1A
Short Description:
RED TEE, MI A197, INPT, CL300, B16.3, GALV
REDUCING TEE, MALLEABLE IRON PER ASTM A197, INTERNAL TAPER PIPE THREAD (NPT) END(S), CLASS 300, DESIGN AND DIMENSIONS
PER ASME B16.3, GALVANIZED

PRTPMGF1PERGRGU1 M2F0H2
Short Description:
RED TEE, HDPE ISO 4427-PE100, FAB, PE, PN16 x PN16, MFR STD, UL/FM
REDUCING TEE, HIGH DENSITY POLYETHYLENE PER ISO 4427 DESIGNATION PE100, FABRICATED, PLAIN END(S), PN16 x PN16, DESIGN
AND DIMENSIONS PER MANUFACTURER STANDARD, UL LISTED AND/OR FM APPROVED

PRTS3HWDBE0404B9 S1E0B
Short Description:
RED TEE, 304 SS A403-WP304-W, WLD, BE, SCH 10S x SCH 10S, B16.9
REDUCING TEE, 304 STAINLESS STEEL PER ASTM A403 GRADE WP304-W, WELDED, BEVELED END(S), SCHEDULE 10S x SCHEDULE 10S,

PRTS3HWDBE0408B9 S1E0B
Short Description:
RED TEE, 304 SS A403-WP304-W, WLD, BE, SCH 10S x SCH 40S, B16.9
REDUCING TEE, 304 STAINLESS STEEL PER ASTM A403 GRADE WP304-W, WELDED, BEVELED END(S), SCHEDULE 10S x SCHEDULE 40S,

PRTS4XSWK3BH0000 S1E0B
Short Description:
RED TEE, 304L SS A182-F304L, SW, CL3000, B16.11
REDUCING TEE, 304L STAINLESS STEEL PER ASTM A182 GRADE F304L, SOCKET WELDING END(S), CLASS 3000, DESIGN AND

PRTS5NSMBE1111B9 SME0L
Short Description:
RED TEE, 304L SS A403-WP304L-S, SMLS, BE, SCH 80S x SCH 80S, B16.9
REDUCING TEE, 304L STAINLESS STEEL PER ASTM A403 GRADE WP304L-S, SEAMLESS, BEVELED END(S), SCHEDULE 80S x SCHEDULE


PRTS5NSMBEXXXXB9 SPE0L
Short Description:
RED TEE, 304L SS A403-WP304L-S, SMLS, BE, XXS x XXS, B16.9
REDUCING TEE, 304L STAINLESS STEEL PER ASTM A403 GRADE WP304L-S, SEAMLESS, BEVELED END(S), DOUBLE EXTRA STRONG x
DOUBLE EXTRA STRONG, DESIGN AND DIMENSIONS PER ASME B16.9

PTECDKSWK3BH0000 C1E2B
Short Description:
TEE, CS A105, SW, CL3000, B16.11
TEE, CARBON STEEL PER ASTM A105, SOCKET WELDING END(S), CLASS 3000, DESIGN AND DIMENSIONS PER ASME B16.11

PTECDLTFK3BH0000 C1F2A
Short Description:
TEE, CS A105N, INPT, CL3000, B16.11
TEE, CARBON STEEL PER ASTM A105, NORMALIZED, INTERNAL TAPER PIPE THREAD (NPT) END(S), CLASS 3000, DESIGN AND

PTECFGSMBE10B900 C1E2V
Short Description:
TEE, CS A234-WPB, SMLS, BE, SCH 80, B16.9
TEE, CARBON STEEL PER ASTM A234 GRADE WPB, SEAMLESS, BEVELED END(S), SCHEDULE 80, DESIGN AND DIMENSIONS PER ASME
B16.9

PTECFGSMBE10B9RL L1E0VJ, L1E0VT
Short Description:
TEE, CS A234-WPB, SMLS, BE, SCH 80, B16.9, 6.4mm (0.25") RUBBER LND
TEE, CARBON STEEL PER ASTM A234 GRADE WPB, SEAMLESS, BEVELED END(S), SCHEDULE 80, DESIGN AND DIMENSIONS PER ASME
B16.9, 6.4mm (0.25") RUBBER LND

PTECFGWDBE2EB900 C1E2A, C1E2R, C1E2V
Short Description:
TEE, CS A234-WPB, WLD, BE, 9.53mm (0.375") NOM. WT, B16.9
TEE, CARBON STEEL PER ASTM A234 GRADE WPB, WELDED, BEVELED END(S), 9.53mm (0.375") NOMINAL WALL THICKNESS, DESIGN AND


PTECFGWDBE2HB900 C1E2A
Short Description:
TEE, CS A234-WPB, WLD, BE, 12.70mm (0.500") NOM. WT, B16.9
TEE, CARBON STEEL PER ASTM A234 GRADE WPB, WELDED, BEVELED END(S), 12.70mm (0.500") NOMINAL WALL THICKNESS, DESIGN

PTECFGWDBESTB900 C1E2A, C1E2B, C1E2R, C1E2V, G1E1A
Short Description:
TEE, CS A234-WPB, WLD, BE, STD, B16.9
TEE, CARBON STEEL PER ASTM A234 GRADE WPB, WELDED, BEVELED END(S), STANDARD WEIGHT, DESIGN AND DIMENSIONS PER
ASME B16.9

PTECFGWDBESTB9RL L1E0VJ, L1E0VT
Short Description:
TEE, CS A234-WPB, WLD, BE, STD, B16.9, 6.4mm (0.25") RUBBER LND
ASME B16.9, 6.4mm (0.25") RUBBER LND

PTECFGWDBESTB9RM L1E0VJ, L1E0VT
Short Description:
TEE, CS A234-WPB, WLD, BE, STD, B16.9, 12.7mm (0.5") RUBBER LND
ASME B16.9, 12.7mm (0.5") RUBBER LND

PTECFGWDBESTB9RP L1E0VT
Short Description:
TEE, CS A234-WPB, WLD, BE, STD, B16.9, 25.4mm (1.0") CERAMIC RUBBER LND
ASME B16.9, 25.4mm (1.0") CERAMIC RUBBER LINED

PTECFHSMBESTB900 C1F2A
Short Description:
TEE, CS A234-WPB N, SMLS, BE, STD, B16.9
TEE, CARBON STEEL PER ASTM A234 GRADE WPB, NORMALIZED, SEAMLESS, BEVELED END(S), STANDARD WEIGHT, DESIGN AND


PTEFERTF30B30000 C1E2A, C1E2R
Short Description:
TEE, MI A197, INPT, CL300, B16.3
TEE, MALLEABLE IRON PER ASTM A197, INTERNAL TAPER PIPE THREAD (NPT) END(S), CLASS 300, DESIGN AND DIMENSIONS PER ASME
B16.3

PTEFERTF30B3UA00 G1E1A
Short Description:
TEE, MI A197, INPT, CL300, B16.3, GALV
TEE, MALLEABLE IRON PER ASTM A197, INTERNAL TAPER PIPE THREAD (NPT) END(S), CLASS 300, DESIGN AND DIMENSIONS PER ASME
B16.3, GALVANIZED

PTEPMGF1PERGM1U2 M2F0H2
Short Description:
TEE, HDPE ISO 4427-PE100, FAB, PE, PN16, MFR STD, UL/FM
TEE, HIGH DENSITY POLYETHYLENE PER ISO 4427 DESIGNATION PE100, FABRICATED, PLAIN END(S), PN16, DESIGN AND DIMENSIONS
PER MANUFACTURER STANDARD, UL LISTED AND/OR FM APPROVED

PTES3HWDBE04B900 S1E0B
Short Description:
TEE, 304 SS A403-WP304-W, WLD, BE, SCH 10S, B16.9
TEE, 304 STAINLESS STEEL PER ASTM A403 GRADE WP304-W, WELDED, BEVELED END(S), SCHEDULE 10S, DESIGN AND DIMENSIONS
PER ASME B16.9

PTES4XSWK3BH0000 S1E0B
Short Description:
TEE, 304L SS A182-F304L, SW, CL3000, B16.11
TEE, 304L STAINLESS STEEL PER ASTM A182 GRADE F304L, SOCKET WELDING END(S), CLASS 3000, DESIGN AND DIMENSIONS PER
ASME B16.11

PTES5NSMBE11B900 SME0L
Short Description:
TEE, 304L SS A403-WP304L-S, SMLS, BE, SCH 80S, B16.9
TEE, 304L STAINLESS STEEL PER ASTM A403 GRADE WP304L-S, SEAMLESS, BEVELED END(S), SCHEDULE 80S, DESIGN AND DIMENSIONS
PER ASME B16.9


PTES5NSMBEXXB900 SPE0L
Short Description:
TEE, 304L SS A403-WP304L-S, SMLS, BE, XXS, B16.9
TEE, 304L STAINLESS STEEL PER ASTM A403 GRADE WP304L-S, SEAMLESS, BEVELED END(S), DOUBLE EXTRA STRONG, DESIGN AND

PUNCDKSWK3SJ0000 C1E2B
Short Description:
UN, CS A105, SW, CL3000, SP-83
UNION, CARBON STEEL PER ASTM A105, SOCKET WELDING END(S), CLASS 3000, DESIGN AND DIMENSIONS PER MSS SP-83

PUNFERTF30BT0000 C1E2A, C1E2R, C1E2V
Short Description:
UN, MI A197, INPT, CL300, B16.39
UNION, MALLEABLE IRON PER ASTM A197, INTERNAL TAPER PIPE THREAD (NPT) END(S), CLASS 300, DESIGN AND DIMENSIONS PER
ASME B16.39

PUNFERTF30BTUA00 G1E1A
Short Description:
UN, MI A197, INPT, CL300, B16.39, GALV
UNION, MALLEABLE IRON PER ASTM A197, INTERNAL TAPER PIPE THREAD (NPT) END(S), CLASS 300, DESIGN AND DIMENSIONS PER
ASME B16.39, GALVANIZED

PUNS4XSWK3SJ0000 S1E0B
Short Description:
UN, 304L SS A182-F304L, SW, CL3000, SP-83
UNION, 304L STAINLESS STEEL PER ASTM A182 GRADE F304L, SOCKET WELDING END(S), CLASS 3000, DESIGN AND DIMENSIONS PER
MSS SP-83

PVBBBNWFTF002A08 C1E2A, G1E1A
Short Description:
VLV-BALL, BRS B584-C84400, 600 CWP, INPT, B1.20.1, MFR STD, 1-PC, FLOATING, SP-110, RED PORT, 316 SS TRIM, RTFE ST, PTFE PKG,
LO W/ LOCK, NON-ASB
VALVE - BALL, LEADED SEMI-RED BRASS PER ASTM B584 UNS C84400, 600 PSIG COLD WORKING PRESSURE, INTERNAL TAPER PIPE
THREAD (NPT) END(S), ENDS PER ASME B1.20.1, DIMENSIONS PER MANUFACTURER STANDARD, ONE-PIECE BODY, FLOATING BALL,
DESIGN PER MSS SP-110, REDUCED PORT, 316 STAINLESS STEEL TRIM, RTFE SEATS, PTFE PACKING, LEVER OPERATED WITH LOCKING
DEVICE, THE USE OF ASBESTOS IN ANY PART OF THIS COMPONENT IS PROHIBITED


PVBCDL30TFC01320 C1F2A
Short Description:
VLV-BALL, CS A105N, CL300, INPT, B16.11, MFR STD, 3-PC SO BOLTED, FLOATING, API 608, BI-DIR, FULL PORT, 316 SS TRIM, RTFE ST, FG
GSK, FIRE-TESTED API 607, LO W/ LOCK, NON-ASB
VALVE - BALL, CARBON STEEL PER ASTM A105, NORMALIZED, CLASS 300, INTERNAL TAPER PIPE THREAD (NPT) END(S), ENDS PER
ASME B16.11, DIMENSIONS PER MANUFACTURER STANDARD, THREE-PIECE SWING OUT BOLTED BODY, FLOATING BALL, DESIGN PER
API 608, BI-DIRECTIONAL SHUT-OFF, FULL PORT, 316 STAINLESS STEEL TRIM, RTFE SEATS, FLEXIBLE GRAPHITE STEM SEAL GASKET,
FIRE-TESTED TO API 607, LEVER OPERATED WITH LOCKING DEVICE, THE USE OF ASBESTOS IN ANY PART OF THIS COMPONENT IS
PROHIBITED

PVBCFB15RFAL1A7D C1E2A
Short Description:
VLV-BALL, CS A216-WCB, CL150, RF, B16.5, B16.10 LONG, SPLIT BODY, FLOATING, API 608, BI-DIR, FULL PORT, 316 SS TRIM, PTFE ST, FG
GSK, FIRE-TESTED API 607, LO W/ LOCK, NON-ASB
VALVE - BALL, CARBON STEEL PER ASTM A216 GRADE WCB, CLASS 150, RAISED FACE, ENDS PER ASME B16.5, DIMENSIONS PER ASME
B16.10 LONG PATTERN, SPLIT BODY, FLOATING BALL, DESIGN PER API 608, BI-DIRECTIONAL SHUT-OFF, FULL PORT, 316 STAINLESS
STEEL TRIM, PTFE SEATS, FLEXIBLE GRAPHITE STEM SEAL GASKET, FIRE-TESTED TO API 607, LEVER OPERATED WITH LOCKING
DEVICE, THE USE OF ASBESTOS IN ANY PART OF THIS COMPONENT IS PROHIBITED

PVBCFB15RFAL1A7J C1E2B
Short Description:
VLV-BALL, CS A216-WCB, CL150, RF, B16.5, B16.10 LONG, SPLIT BODY, FLOATING, API 608, BI-DIR, FULL PORT, 316 SS TRIM, RTFE ST,
RTFE SEALS, FIRE-TESTED API 607, LO W/ LOCK, NON-ASB
VALVE - BALL, CARBON STEEL PER ASTM A216 GRADE WCB, CLASS 150, RAISED FACE, ENDS PER ASME B16.5, DIMENSIONS PER ASME
B16.10 LONG PATTERN, SPLIT BODY, FLOATING BALL, DESIGN PER API 608, BI-DIRECTIONAL SHUT-OFF, FULL PORT, 316 STAINLESS
STEEL TRIM, RTFE SEATS, RTFE SEALS, FIRE-TESTED TO API 607, LEVER OPERATED WITH LOCKING DEVICE, THE USE OF ASBESTOS IN
ANY PART OF THIS COMPONENT IS PROHIBITED

PVBCFBK1SWC05A7J C1E2B
Short Description:
VLV-BALL, CS A216-WCB, CL1500, SW, B16.11, MFR STD, TOP ENTRY, FLOATING, B16.34, AS, BI-DIR, FULL PORT, 316 SS TRIM, RTFE ST,
VALVE - BALL, CARBON STEEL PER ASTM A216 GRADE WCB, CLASS 1500, SOCKET WELDING END(S), ENDS PER ASME B16.11,
DIMENSIONS PER MANUFACTURER STANDARD, TOP ENTRY, FLOATING BALL, DESIGN PER ASME B16.34, ANTI-STATIC, BI-DIRECTIONAL
SHUT-OFF, FULL PORT, 316 STAINLESS STEEL TRIM, RTFE SEATS, RTFE SEALS, FIRE-TESTED TO API 607, LEVER OPERATED WITH
LOCKING DEVICE, THE USE OF ASBESTOS IN ANY PART OF THIS COMPONENT IS PROHIBITED


PVBS5D15RFAL1A7J S1E0B
Short Description:
VLV-BALL, 304L SS A351-CF3, CL150, RF, B16.5, B16.10 LONG, SPLIT BODY, FLOATING, API 608, BI-DIR, FULL PORT, 316 SS TRIM, RTFE ST,
VALVE - BALL, 304L STAINLESS STEEL PER ASTM A351 GRADE CF3, CLASS 150, RAISED FACE, ENDS PER ASME B16.5, DIMENSIONS PER
ASME B16.10 LONG PATTERN, SPLIT BODY, FLOATING BALL, DESIGN PER API 608, BI-DIRECTIONAL SHUT-OFF, FULL PORT, 316
STAINLESS STEEL TRIM, RTFE SEATS, RTFE SEALS, FIRE-TESTED TO API 607, LEVER OPERATED WITH LOCKING DEVICE, THE USE OF
ASBESTOS IN ANY PART OF THIS COMPONENT IS PROHIBITED

PVBS5D80SWA1Z320 S1E0B
Short Description:
VLV-BALL, 304L SS A351-CF3, CL800, SW, B16.11, MFR STD, 3-PC SO BOLTED, FLOATING, API 608, BI-DIR, 1XRED PORT, 316 SS TRIM,
RTFE ST, FG GSK, FIRE-TESTED API 607, LO W/ LOCK, NON-ASB
VALVE - BALL, 304L STAINLESS STEEL PER ASTM A351 GRADE CF3, CLASS 800, SOCKET WELDING END(S), ENDS PER ASME B16.11,
DIMENSIONS PER MANUFACTURER STANDARD, THREE-PIECE SWING OUT BOLTED BODY, FLOATING BALL, DESIGN PER API 608, BI-
DIRECTIONAL SHUT-OFF, SINGLE REDUCED PORT, 316 STAINLESS STEEL TRIM, RTFE SEATS, FLEXIBLE GRAPHITE STEM SEAL GASKET,
FIRE-TESTED TO API 607, LEVER OPERATED WITH LOCKING DEVICE, THE USE OF ASBESTOS IN ANY PART OF THIS COMPONENT IS
PROHIBITED

PVCCDL80SWC02A07 C1E2B
Short Description:
VLV-CHK, CS A105N, CL800, SW, B16.11, MFR STD, SWING, API 602, BC, STD PORT, API 602 TRIM 8, API 602 BOLTING, NON-ASB
VALVE - CHECK, CARBON STEEL PER ASTM A105, NORMALIZED, CLASS 800, SOCKET WELDING END(S), ENDS PER ASME B16.11,
DIMENSIONS PER MANUFACTURER STANDARD, SWING TYPE, DESIGN PER API 602, BOLTED COVER, STANDARD PORT, API 602 TRIM 8
WITH HARDFACED BODY SEATS, API 602 STANDARD BOLTING, THE USE OF ASBESTOS IN ANY PART OF THIS COMPONENT IS
PROHIBITED

PVCCDL80TFC02A07 C1E2A, G1E1A
Short Description:
VLV-CHK, CS A105N, CL800, INPT, B16.11, MFR STD, SWING, API 602, BC, STD PORT, API 602 TRIM 8, API 602 BOLTING, NON-ASB
VALVE - CHECK, CARBON STEEL PER ASTM A105, NORMALIZED, CLASS 800, INTERNAL TAPER PIPE THREAD (NPT) END(S), ENDS PER
ASME B16.11, DIMENSIONS PER MANUFACTURER STANDARD, SWING TYPE, DESIGN PER API 602, BOLTED COVER, STANDARD PORT,
API 602 TRIM 8 WITH HARDFACED BODY SEATS, API 602 STANDARD BOLTING, THE USE OF ASBESTOS IN ANY PART OF THIS
COMPONENT IS PROHIBITED

PVCCFB15RFA2YA5V C1E2A
Short Description:
VLV-CHK, CS A216-WCB, CL150, RF, B16.47-A, API 594 TYPE A DIMS, DUAL PLT, WFR, API 594 (R/L), WITH INCONEL X-750 SPRING, API 594
TRIM 5, H OR V UP, NON-ASB
VALVE - CHECK, CARBON STEEL PER ASTM A216 GRADE WCB, CLASS 150, RAISED FACE, ENDS PER ASME B16.47 SERIES A, DIMENSIONS
PER API 594 TYPE A, DUAL PLATE TYPE, WAFER BODY, DESIGN PER API 594 (RETAINERLESS), PROVIDED WITH INCONEL X-750 SPRING
ASSIST, API 594 TRIM 5 WITH FULL HARDFACING, HORIZONTAL OR VERTICAL WITH UPWARD FLOW INSTALLATION, THE USE OF


PVCCFB15RFA4DAFN C1E2A, C1E2B
Short Description:
VLV-CHK, CS A216-WCB, CL150, RF, B16.5, B16.10, PISTON, MFR, STD PORT, WITH MFR STD SPRING, 13CR SS TRIM, H OR V UP, SP WD
GSK 316L-FG, B7/2H, DFT EXCALIBUR OR EQUAL
VALVE - CHECK, CARBON STEEL PER ASTM A216 GRADE WCB, CLASS 150, RAISED FACE, ENDS PER ASME B16.5, DIMENSIONS PER ASME
B16.10, PISTON TYPE, DESIGN PER MANUFACTURER STANDARD, STANDARD PORT, PROVIDED WITH MANUFACTURER STANDARD
SPRING ASSIST, 13CR STAINLESS STEEL TRIM, HORIZONTAL OR VERTICAL WITH UPWARD FLOW INSTALLATION, SPIRAL WOUND
GASKET 316L, FLEXIBLE GRAPHITE FILLED, ASTM A193 GRADE B7 BOLTS WITH ASTM A194 GRADE 2H NUTS, DFT EXCALIBUR MODEL OR
EQUAL

PVCCFB15RFAA29J2 C1E2A, G1E1A
Short Description:
VLV-CHK, CS A216-WCB, CL150, RF, B16.5, B16.10, SWING, API 594, BC, API 594 TRIM 10, MFR STD BOLTS, NON-ASB
B16.10, SWING TYPE, DESIGN PER API 594, BOLTED COVER, API 594 TRIM 10, MANUFACTURER STANDARD BOLTING, THE USE OF

PVCCFB15RFAA29L2 C1E2B
Short Description:
VLV-CHK, CS A216-WCB, CL150, RF, B16.5, B16.10, SWING, API 594, BC, API 594 TRIM 12, MFR STD BOLTS, NON-ASB
B16.10, SWING TYPE, DESIGN PER API 594, BOLTED COVER, API 594 TRIM 12 WITH HARDFACED BODY SEATS, MANUFACTURER
STANDARD BOLTING, THE USE OF ASBESTOS IN ANY PART OF THIS COMPONENT IS PROHIBITED

PVCS5D15RFAA29L2 S1E0B
Short Description:
VLV-CHK, 304L SS A351-CF3, CL150, RF, B16.5, B16.10, SWING, API 594, BC, API 594 TRIM 12, MFR STD BOLTS, NON-ASB
VALVE - CHECK, 304L STAINLESS STEEL PER ASTM A351 GRADE CF3, CLASS 150, RAISED FACE, ENDS PER ASME B16.5, DIMENSIONS
PER ASME B16.10, SWING TYPE, DESIGN PER API 594, BOLTED COVER, API 594 TRIM 12 WITH HARDFACED BODY SEATS,
MANUFACTURER STANDARD BOLTING, THE USE OF ASBESTOS IN ANY PART OF THIS COMPONENT IS PROHIBITED

PVCS5D80SWC02A07 S1E0B
Short Description:
VLV-CHK, 304L SS A351-CF3, CL800, SW, B16.11, MFR STD, SWING, API 602, BC, STD PORT, API 602 TRIM 8, API 602 BOLTING, NON-ASB
VALVE - CHECK, 304L STAINLESS STEEL PER ASTM A351 GRADE CF3, CLASS 800, SOCKET WELDING END(S), ENDS PER ASME B16.11,
DIMENSIONS PER MANUFACTURER STANDARD, SWING TYPE, DESIGN PER API 602, BOLTED COVER, STANDARD PORT, API 602 TRIM 8
WITH HARDFACED BODY SEATS, API 602 STANDARD BOLTING, THE USE OF ASBESTOS IN ANY PART OF THIS COMPONENT IS
PROHIBITED


PVFCFB15RFA56A40 C1E2A, G1E1A
Short Description:
VLV-BFLY, CS A216-WCB, CL150, RF, B16.5, API 609 CAT B DIMS, THRU DRILLED LUG, API 609 CAT. B, DBL OFFSET, 316 SS DISC, RTFE ST,
17-4 PH SS STEM, FIRE-TESTED API 607, LO, NON-ASB
VALVE - BUTTERFLY, CARBON STEEL PER ASTM A216 GRADE WCB, CLASS 150, RAISED FACE, ENDS PER ASME B16.5, DIMENSIONS PER
API 609 CATEGORY B, THROUGH DRILLED LUG BODY TYPE, DESIGN PER API 609 CATEGORY B, DOUBLE OFFSET, 316 STAINLESS STEEL
DISC, RTFE SEAT, 17-4 PH STAINLESS STEEL STEM, FIRE-TESTED TO API 607, LEVER OPERATED, THE USE OF ASBESTOS IN ANY PART
OF THIS COMPONENT IS PROHIBITED

PVFCFB15RFA56A41 C1E2A, G1E1A
Short Description:
VLV-BFLY, CS A216-WCB, CL150, RF, B16.5, API 609 CAT B DIMS, THRU DRILLED LUG, API 609 CAT. B, DBL OFFSET, 316 SS DISC, RTFE ST,
17-4 PH SS STEM, FIRE-TESTED API 607, GO, NON-ASB
VALVE - BUTTERFLY, CARBON STEEL PER ASTM A216 GRADE WCB, CLASS 150, RAISED FACE, ENDS PER ASME B16.5, DIMENSIONS PER
API 609 CATEGORY B, THROUGH DRILLED LUG BODY TYPE, DESIGN PER API 609 CATEGORY B, DOUBLE OFFSET, 316 STAINLESS STEEL
DISC, RTFE SEAT, 17-4 PH STAINLESS STEEL STEM, FIRE-TESTED TO API 607, GEAR OPERATED, THE USE OF ASBESTOS IN ANY PART
OF THIS COMPONENT IS PROHIBITED

PVGCFB15RFAA4FH2 C1F2A, M2F0H2
Short Description:
VLV-GT, CS A216-WCB, CL150, RF, B16.5, B16.10, B16.34, OS&Y, BB, FULL PORT, FLX WDG, API 600 TRIM 8, CI FG PKG W/ ANTI-EXTR, API
600 BOLTING, HW, NON-ASB
VALVE - GATE, CARBON STEEL PER ASTM A216 GRADE WCB, CLASS 150, RAISED FACE, ENDS PER ASME B16.5, DIMENSIONS PER ASME
B16.10, DESIGN PER ASME B16.34, OUTSIDE SCREW AND YOKE, BOLTED BONNET, FULL PORT, FLEXIBLE WEDGE, API 600 TRIM 8 WITH
HARDFACED BODY SEATS, CORROSION INHIBITED DIE FORMED FLEXIBLE GRAPHITE PACKING WITH ANTI-EXTRUSION RINGS, API 600
STANDARD BOLTING, HANDWHEEL OPERATED, THE USE OF ASBESTOS IN ANY PART OF THIS COMPONENT IS PROHIBITED

PVGCFB15RFAA4FH3 C1F2A, M2F0H2
Short Description:
VLV-GT, CS A216-WCB, CL150, RF, B16.5, B16.10, B16.34, OS&Y, BB, FULL PORT, FLX WDG, API 600 TRIM 8, CI FG PKG W/ ANTI-EXTR, API
600 BOLTING, GO, NON-ASB
VALVE - GATE, CARBON STEEL PER ASTM A216 GRADE WCB, CLASS 150, RAISED FACE, ENDS PER ASME B16.5, DIMENSIONS PER ASME
B16.10, DESIGN PER ASME B16.34, OUTSIDE SCREW AND YOKE, BOLTED BONNET, FULL PORT, FLEXIBLE WEDGE, API 600 TRIM 8 WITH
HARDFACED BODY SEATS, CORROSION INHIBITED DIE FORMED FLEXIBLE GRAPHITE PACKING WITH ANTI-EXTRUSION RINGS, API 600
STANDARD BOLTING, GEAR OPERATED, THE USE OF ASBESTOS IN ANY PART OF THIS COMPONENT IS PROHIBITED


PVGFAX15FFJA1A3B C1F2A, M2F0H2
Short Description:
VLV-GT, DI A536-65-45-12, CL150, FF, B16.42, B16.10, AWWA C515, NRS, BB, FULL PORT, ELS ENCAP WDG, BRZ TRIM, MFR PKG, MFR STD
BOLTS, UL/FM, 17 BARG (250 PSIG) CWP, ADJ PI, NON-ASB
VALVE - GATE, DUCTILE IRON PER ASTM A536 GRADE 65-45-12, CLASS 150, FLAT FACE, ENDS PER ASME B16.42, DIMENSIONS PER ASME
B16.10, DESIGN PER AWWA C515, INSIDE SCREW NON-RISING STEM, BOLTED BONNET, FULL PORT, ELASTOMER ENCAPSULATED
WEDGE, BRONZE TRIM, MANUFACTURER STANDARD PACKING, MANUFACTURER STANDARD BOLTING, UL LISTED AND/OR FM
APPROVED, RATED FOR 17 BARG (250 PSIG) COLD WORKING PRESSURE, ADJUSTABLE LENGTH POST INDICATOR, THE USE OF

PVGFCV12FFA38AFE C1E2A, G1E1A
Short Description:
VLV-GT, CI A126-B, CL125, FF, B16.1, B16.10, SP-70, OS&Y, BB, SLD WDG, BRZ TRIM, HW, NON-ASB
VALVE - GATE, GRAY CAST IRON PER ASTM A126 GRADE B, CLASS 125, FLAT FACE, ENDS PER ASME B16.1, DIMENSIONS PER ASME
B16.10, DESIGN PER MSS SP-70, OUTSIDE SCREW AND YOKE, BOLTED BONNET, SOLID WEDGE, BRONZE TRIM, HANDWHEEL
OPERATED, THE USE OF ASBESTOS IN ANY PART OF THIS COMPONENT IS PROHIBITED

PVKCFBW1RFA00A07 C1E2A, G1E1A
Short Description:
VLV-KNFGT, CS A216-WCB, 10.3 BARG (150 PSIG) CWP, RF, B16.5, SP-81, TAPPED FULL FLG WAFER STYLE, SP-81, OS&Y, RS, BL, FULL
PORT, SLD GATE, 316 SS GATE AND STEM, METAL ST, PTFE PKG, HW, NON-ASB
VALVE - KNIFE GATE, CARBON STEEL PER ASTM A216 GRADE WCB, 10.3 BARG (150 PSIG) COLD WORKING PRESSURE, RAISED FACE,
ENDS PER ASME B16.5, DIMENSIONS PER MSS SP-81, TAPPED FULL FLANGED WAFER STYLE, DESIGN PER MSS SP-81, OUTSIDE SCREW
AND YOKE, RISING STEM, BONNETLESS, FULL PORT, SOLID GATE, 316 STAINLESS STEEL GATE AND STEM, METAL TO METAL SEAT,
PTFE PACKING, HANDWHEEL OPERATED, THE USE OF ASBESTOS IN ANY PART OF THIS COMPONENT IS PROHIBITED

PVKCFBW1RFA00A08 C1E2A, G1E1A
Short Description:
VLV-KNFGT, CS A216-WCB, 10.3 BARG (150 PSIG) CWP, RF, B16.5, SP-81, TAPPED FULL FLG WAFER STYLE, SP-81, OS&Y, RS, BL, FULL
PORT, SLD GATE, 316 SS GATE AND STEM, METAL ST, PTFE PKG, GO, NON-ASB
ENDS PER ASME B16.5, DIMENSIONS PER MSS SP-81, TAPPED FULL FLANGED WAFER STYLE, DESIGN PER MSS SP-81, OUTSIDE SCREW
AND YOKE, RISING STEM, BONNETLESS, FULL PORT, SOLID GATE, 316 STAINLESS STEEL GATE AND STEM, METAL TO METAL SEAT,
PTFE PACKING, GEAR OPERATED, THE USE OF ASBESTOS IN ANY PART OF THIS COMPONENT IS PROHIBITED

PVKCFBW1RFA06A08 C1E2A
Short Description:
VLV-KNFGT, CS A216-WCB, 10.3 BARG (150 PSIG) CWP, RF, B16.47-A, SP-81, TAPPED FULL FLG WAFER STYLE, SP-81, OS&Y, RS, BL, FULL
PORT, SLD GATE, 316 SS GATE AND STEM, METAL ST, PTFE PKG, GO, NON-ASB
ENDS PER ASME B16.47 SERIES A, DIMENSIONS PER MSS SP-81, TAPPED FULL FLANGED WAFER STYLE, DESIGN PER MSS SP-81,
OUTSIDE SCREW AND YOKE, RISING STEM, BONNETLESS, FULL PORT, SOLID GATE, 316 STAINLESS STEEL GATE AND STEM, METAL TO
METAL SEAT, PTFE PACKING, GEAR OPERATED, THE USE OF ASBESTOS IN ANY PART OF THIS COMPONENT IS PROHIBITED


PVKFAX15FFA04A10 C1E2V, L1E0VT
Short Description:
VLV-KNFGT, DI A536-65-45-12, CL150, FF, B16.5, MFR STD, TAPPED LUG, MFR, OS&Y, RS, BB, FULL PORT, SLD GATE, 316 SS GATE AND
STEM, NAT. RUB SLEEVE MLD W/STIFF. RING, MFR PKG, HW, CLARKSON KGF OR EQUAL
VALVE - KNIFE GATE, DUCTILE IRON PER ASTM A536 GRADE 65-45-12, CLASS 150, FLAT FACE, ENDS PER ASME B16.5, DIMENSIONS PER
MANUFACTURER STANDARD, TAPPED LUG BODY TYPE, DESIGN PER MANUFACTURER STANDARD, OUTSIDE SCREW AND YOKE,
RISING STEM, BOLTED BONNET, FULL PORT, SOLID GATE, 316 STAINLESS STEEL GATE AND STEM, NATURAL RUBBER SLEEVE MOLDED
WITH AN INTERGRAL STIFFENER RING, WITH RETAINER FLANGES, MANUFACTURER STANDARD PACKING, HANDWHEEL OPERATED,
CLARKSON KGF OR EQUAL

PVKFAX15FFA04A11 C1E2V, L1E0VT
Short Description:
VLV-KNFGT, DI A536-65-45-12, CL150, FF, B16.5, MFR STD, TAPPED LUG, MFR, OS&Y, RS, BB, FULL PORT, SLD GATE, 316 SS GATE AND
STEM, NAT. RUB SLEEVE MLD W/STIFF. RING, MFR PKG, GO, CLARKSON KGF OR EQUAL
VALVE - KNIFE GATE, DUCTILE IRON PER ASTM A536 GRADE 65-45-12, CLASS 150, FLAT FACE, ENDS PER ASME B16.5, DIMENSIONS PER
MANUFACTURER STANDARD, TAPPED LUG BODY TYPE, DESIGN PER MANUFACTURER STANDARD, OUTSIDE SCREW AND YOKE,
WITH AN INTERGRAL STIFFENER RING, WITH RETAINER FLANGES, MANUFACTURER STANDARD PACKING, GEAR OPERATED,
CLARKSON KGF OR EQUAL

PVKFAXP4FFA05A09 C1E2R, L1E0VJ, L1E0VT
Short Description:
VLV-KNFGT, DI A536-65-45-12, 100 PSIG, FF, B16.5, MFR STD, DBL FLG, MFR, OS&Y, RS, BB, FULL PORT, SLD GATE, 316 SS GATE AND
STEM, NAT. RUB SLEEVE MLD W/STIFF. RING, MFR PKG, HW, CLARKSON KGA OR EQUAL
VALVE - KNIFE GATE, DUCTILE IRON PER ASTM A536 GRADE 65-45-12, 100 PSIG, FLAT FACE, ENDS PER ASME B16.5, DIMENSIONS PER
MANUFACTURER STANDARD, DOUBLE FLANGED BODY TYPE, DESIGN PER MANUFACTURER STANDARD, OUTSIDE SCREW AND YOKE,
WITH AN INTERGRAL STIFFENER RING, WITH RETAINER FLANGES, MANUFACTURER STANDARD PACKING, HANDWHEEL OPERATED,
CLARKSON KGA OR EQUAL

PVKFAXP4FFA05A0E C1E2R, L1E0VJ, L1E0VT
Short Description:
VLV-KNFGT, DI A536-65-45-12, 100 PSIG, FF, B16.5, MFR STD, DBL FLG, MFR, OS&Y, RS, BB, FULL PORT, SLD GATE, 316 SS GATE AND
STEM, NAT. RUB SLEEVE MLD W/STIFF. RING, MFR PKG, GO, CLARKSON KGA OR EQUAL
VALVE - KNIFE GATE, DUCTILE IRON PER ASTM A536 GRADE 65-45-12, 100 PSIG, FLAT FACE, ENDS PER ASME B16.5, DIMENSIONS PER
MANUFACTURER STANDARD, DOUBLE FLANGED BODY TYPE, DESIGN PER MANUFACTURER STANDARD, OUTSIDE SCREW AND YOKE,
WITH AN INTERGRAL STIFFENER RING, WITH RETAINER FLANGES, MANUFACTURER STANDARD PACKING, GEAR OPERATED,
CLARKSON KGA OR EQUAL


PVLCDK80SWCP1A84 C1E2B
Short Description:
VLV-GLB, CS A105, CL800, SW, B16.11, MFR STD, T-BODY, B16.34, OS&Y, BB, STD PORT, PLUG TYPE DISC, API 602 TRIM 11, MFR PKG, HW
VALVE - GLOBE, CARBON STEEL PER ASTM A105, CLASS 800, SOCKET WELDING END(S), ENDS PER ASME B16.11, DIMENSIONS PER
MANUFACTURER STANDARD, T-BODY, DESIGN PER ASME B16.34, OUTSIDE SCREW AND YOKE, BOLTED BONNET, STANDARD PORT,
TAPERED PLUG TYPE DISC CLOSURE, API 602 TRIM 11 WITH HARDFACED BODY SEATS, MANUFACTURER STANDARD PACKING,
HANDWHEEL OPERATED

PVLCDK80TFC01BH2 C1E2A, G1E1A
Short Description:
VLV-GLB, CS A105, CL800, INPT, B16.11, MFR STD, T-BODY, API 602, OS&Y, BB, STD PORT, CONICAL DISC, API 602 TRIM 8, CI FG PKG W/
ANTI-EXTR, API 602 BOLTING, HW, NON-ASB
VALVE - GLOBE, CARBON STEEL PER ASTM A105, CLASS 800, INTERNAL TAPER PIPE THREAD (NPT) END(S), ENDS PER ASME B16.11,
DIMENSIONS PER MANUFACTURER STANDARD, T-BODY, DESIGN PER API 602, OUTSIDE SCREW AND YOKE, BOLTED BONNET,
STANDARD PORT, CONICAL DISC TYPE CLOSURE, API 602 TRIM 8 WITH HARDFACED BODY SEATS, CORROSION INHIBITED DIE FORMED
FLEXIBLE GRAPHITE PACKING WITH ANTI-EXTRUSION RINGS, API 602 STANDARD BOLTING, HANDWHEEL OPERATED, THE USE OF

PVLCFB15RFAA5A84 C1E2B
Short Description:
VLV-GLB, CS A216-WCB, CL150, RF, B16.5, B16.10, T-BODY, B16.34, OS&Y, BB, STD PORT, PLUG TYPE DISC, API 602 TRIM 11, MFR PKG,
HW
VALVE - GLOBE, CARBON STEEL PER ASTM A216 GRADE WCB, CLASS 150, RAISED FACE, ENDS PER ASME B16.5, DIMENSIONS PER ASME
B16.10, T-BODY, DESIGN PER ASME B16.34, OUTSIDE SCREW AND YOKE, BOLTED BONNET, STANDARD PORT, TAPERED PLUG TYPE
DISC CLOSURE, API 602 TRIM 11 WITH HARDFACED BODY SEATS, MANUFACTURER STANDARD PACKING, HANDWHEEL OPERATED

PVLCFB15RFAA5CQ2 C1E2A, G1E1A
Short Description:
VLV-GLB, CS A216-WCB, CL150, RF, B16.5, B16.10, T-BODY, B16.34, OS&Y, BB, STD PORT, CONICAL DISC, API 623 TRIM 16, CI FG PKG W/
ANTI-EXTR, API 623 BOLTING, HW, NON-ASB
B16.10, T-BODY, DESIGN PER ASME B16.34, OUTSIDE SCREW AND YOKE, BOLTED BONNET, STANDARD PORT, CONICAL DISC TYPE
CLOSURE, API 623 TRIM 16 WITH FULL HARDFACING, CORROSION INHIBITED DIE FORMED FLEXIBLE GRAPHITE PACKING WITH ANTI-
EXTRUSION RINGS, API 623 STANDARD BOLTING, HANDWHEEL OPERATED, THE USE OF ASBESTOS IN ANY PART OF THIS COMPONENT
IS PROHIBITED


PVLCFB15RFAA5CQ3 C1E2A, G1E1A
Short Description:
VLV-GLB, CS A216-WCB, CL150, RF, B16.5, B16.10, T-BODY, B16.34, OS&Y, BB, STD PORT, CONICAL DISC, API 623 TRIM 16, CI FG PKG W/
ANTI-EXTR, API 623 BOLTING, GO, NON-ASB
B16.10, T-BODY, DESIGN PER ASME B16.34, OUTSIDE SCREW AND YOKE, BOLTED BONNET, STANDARD PORT, CONICAL DISC TYPE
CLOSURE, API 623 TRIM 16 WITH FULL HARDFACING, CORROSION INHIBITED DIE FORMED FLEXIBLE GRAPHITE PACKING WITH ANTI-
EXTRUSION RINGS, API 623 STANDARD BOLTING, GEAR OPERATED, THE USE OF ASBESTOS IN ANY PART OF THIS COMPONENT IS
PROHIBITED

PVPCFB15RFA02A01 C1E2V
Short Description:
VLV-PLG, CS A216-WCB, CL150, RF, B16.5, B16.10 SHORT, NON-LUBR, SLVD, B16.34, BC, RED PORT, TAPERED PLUG, 316 SS PLUG/STEM,
PTFE SLEEVE, FIRE-TESTED API 607, LO W/ LOCK, NON-ASB
VALVE - PLUG, CARBON STEEL PER ASTM A216 GRADE WCB, CLASS 150, RAISED FACE, ENDS PER ASME B16.5, DIMENSIONS PER ASME
B16.10 SHORT PATTERN, NON-LUBRICATED, SLEEVED, DESIGN PER ASME B16.34, BOLTED COVER, REDUCED PORT, TAPERED PLUG,
316 STAINLESS STEEL PLUG AND STEM, PTFE SLEEVE, FIRE-TESTED TO API 607, LEVER OPERATED WITH LOCKING DEVICE, THE USE
OF ASBESTOS IN ANY PART OF THIS COMPONENT IS PROHIBITED

PVPFCV12FFA06A04 C1E2R, L1E0VJ, L1E0VT
Short Description:
VLV-PLG, CI A126-B, CL125, FF, B16.5, B16.10 SHORT, NON-LUBR, B16.34, BC, FULL PORT, TAPERED PLUG, 316 SS PLUG/STEM, PTFE
SLEEVE, FIRE-TESTED API 607, WO, NON-ASB
VALVE - PLUG, GRAY CAST IRON PER ASTM A126 GRADE B, CLASS 125, FLAT FACE, ENDS PER ASME B16.5, DIMENSIONS PER ASME
B16.10 SHORT PATTERN, NON-LUBRICATED, DESIGN PER ASME B16.34, BOLTED COVER, FULL PORT, TAPERED PLUG, 316 STAINLESS
STEEL PLUG AND STEM, PTFE SLEEVE, FIRE-TESTED TO API 607, WRENCH OPERATED, THE USE OF ASBESTOS IN ANY PART OF THIS
COMPONENT IS PROHIBITED


172 I1909e 000 46 Es 0001

Cargado por

Información del documento

Título original

Derechos de autor

Formatos disponibles

Compartir este documento

Compartir o incrustar documentos

Opciones para compartir

¿Le pareció útil este documento?

¿Este contenido es inapropiado?

Copyright:

Formatos disponibles

172 I1909e 000 46 Es 0001

Cargado por

Copyright:

Formatos disponibles

Compañía Minera Doña Inés de Collahuasi S.C.M.

CONTRATO MARCO SERVICIOS DE INGENIERÍA

“SERVICIO DE INGENIERÍA DE DETALLES Y COMPRAS

Aprobado 172-I1909E-000-46-ES-0001 Aprobado

1 26-Sep-21 Construcción CAC CRS MRA MAV

BECHTEL CHILE LTDA

Esta especificación cubre los requerimientos mínimos para la selección de cañerías,

ANSI American National Standards Institute

ASME American Society of Mechanical Engineers

AWWA American Water Work Association

API American Petroleum Institute Standards

ASTM American Society for Testing Materials

AWS American Welding Society

MSS Manufacturer’s standardization Society

MSHA Mine Safety and Health Administration

NFPA National Fire Protection Association

ISO International Organization for standardization

INN Instituto Nacional de Normalización

OSHA Occupational Safety and Health Administration (OSHA) U.S.

FM Factory Mutual Engineering Division Recommended Practices

UL Underwriters Laboratories, Inc. Standards

SAE Society of Automotive Engineers

DIN Deutsche Institute Normen

NACE National Association of Corrosion Engineers

NCh 283 Presiones para Diseño y Cálculo de Circuitos Destinados a la

NCh 691 Agua Potable – Conducción, Regulación y Distribución

PFI Pipe Fabrication Institute

2.2 Códigos específicos

ASME B31.3 Process Piping

ASME B31.4 Pipeline Transportation Systems for Liquids and Slurries

API Spec 5L Line Pipe

NCh 19-79 Prevención de riesgos - Identificación de sistemas de cañerías

172-I1909E-000-46-DC-0002 Adenda al Criterio de Diseño de Cañerías

4 DESIGNACIÓN DE ÍTEMS DE CAÑERÍAS

XX - XXX - XX - XXXXX - XXXXXX - XX

Aislación / Cinta Calefactora

Ejemplo: 20” – 144 – SL – 00101 - L1E0VJ - NI

4.2 Designación número de isométrico de cañerías

La siguiente será la codificación para la designación de isométricos de líneas:

XXX - XX - XXXXX - XXXXX - XX

Ejemplo: 144 – SL – 00101 – 0144A – 01

4.3 Designación de número de plano isométrico (Numeración Bechtel)

La siguiente será la codificación para la designación del número de plano isométrico:

26418 - 220 - P3 - XXX - XX - XXXXX - XXXXX - XX

Ejemplo: 26418 – 220 – P3 – 144 – SL – 00101 – 0144A – 01

1. Número de Proyecto: Corresponde al número de proyecto Bechtel, en este caso es

4.4 Designación de número de plano isométrico (Numeración CMDIC)

La numeración de planos isométricos sigue la convención de numeración CMDIC

172 - I1909E- 000 - 46 - DW - XXXX

N° Consecutivo (0101 al 0400)

4.5 Designación del número de spool

Ejemplo 1: 144 – SL – 00101 – 0144A – 01 – 1

(Spool # 1 del isométrico 144 – SL – 00101 – 0144A – 01)

Ejemplo 2: 144 – SL – 00101 – 0144A – 01 – 2

5 CONVERSIÓN DE LOS DIÁMETROS NOMINALES DE CAÑERÍAS

RELACIÓN DE DIÁMETROS NOMINALES EN CAÑERÍAS

6 ÍNDICE DE CLASES DE MATERIALES

Los nombres de fabricantes y números de referencia de catálogos para válvulas,

Abreviación Inglés Español

Asphalt External Surfaces Will Be Asphaltic Coated Recubrimiento exterior asfalto

Atm Atmosphere Atmósfera

Bfly-FlgAdt Butterfly Flange Adapter Flange adaptador para válvula mariposa

Abreviación Inglés Español