Install and Set Up kubectl on Linux
Before you begin
You must use a kubectl version that is within one minor version difference of your cluster. For example, a v1.31 client can communicate with v1.30, v1.31, and v1.32 control planes. Using the latest compatible version of kubectl helps avoid unforeseen issues.
Install kubectl on Linux
The following methods exist for installing kubectl on Linux:
- Install kubectl binary with curl on Linux
- Install using native package management
- Install using other package management
Install kubectl binary with curl on Linux
Download the latest release with the command:
curl -LO "https://dl.k8s.io/release/$(curl -L -s https://dl.k8s.io/release/stable.txt)/bin/linux/amd64/kubectl"
curl -LO "https://dl.k8s.io/release/$(curl -L -s https://dl.k8s.io/release/stable.txt)/bin/linux/arm64/kubectl"
Note:
To download a specific version, replace the
$(curl -L -s https://dl.k8s.io/release/stable.txt)
portion of the command with the specific version.For example, to download version 1.31.0 on Linux x86-64, type:
curl -LO https://dl.k8s.io/release/v1.31.0/bin/linux/amd64/kubectl
And for Linux ARM64, type:
curl -LO https://dl.k8s.io/release/v1.31.0/bin/linux/arm64/kubectl
Validate the binary (optional)
Download the kubectl checksum file:
curl -LO "https://dl.k8s.io/release/$(curl -L -s https://dl.k8s.io/release/stable.txt)/bin/linux/amd64/kubectl.sha256"
curl -LO "https://dl.k8s.io/release/$(curl -L -s https://dl.k8s.io/release/stable.txt)/bin/linux/arm64/kubectl.sha256"
Validate the kubectl binary against the checksum file:
echo "$(cat kubectl.sha256) kubectl" | sha256sum --check
If valid, the output is:
kubectl: OK
If the check fails,
sha256
exits with nonzero status and prints output similar to:kubectl: FAILED sha256sum: WARNING: 1 computed checksum did NOT match
Note:
Download the same version of the binary and checksum.Install kubectl
sudo install -o root -g root -m 0755 kubectl /usr/local/bin/kubectl
Note:
If you do not have root access on the target system, you can still install kubectl to the
~/.local/bin
directory:chmod +x kubectl mkdir -p ~/.local/bin mv ./kubectl ~/.local/bin/kubectl # and then append (or prepend) ~/.local/bin to $PATH
Test to ensure the version you installed is up-to-date:
kubectl version --client
Or use this for detailed view of version:
kubectl version --client --output=yaml
Install using native package management
Update the
apt
package index and install packages needed to use the Kubernetesapt
repository:sudo apt-get update # apt-transport-https may be a dummy package; if so, you can skip that package sudo apt-get install -y apt-transport-https ca-certificates curl gnupg
Download the public signing key for the Kubernetes package repositories. The same signing key is used for all repositories so you can disregard the version in the URL:
# If the folder `/etc/apt/keyrings` does not exist, it should be created before the curl command, read the note below. # sudo mkdir -p -m 755 /etc/apt/keyrings curl -fsSL https://pkgs.k8s.io/core:/stable:/v1.31/deb/Release.key | sudo gpg --dearmor -o /etc/apt/keyrings/kubernetes-apt-keyring.gpg sudo chmod 644 /etc/apt/keyrings/kubernetes-apt-keyring.gpg # allow unprivileged APT programs to read this keyring
Note:
In releases older than Debian 12 and Ubuntu 22.04, folder/etc/apt/keyrings
does not exist by default, and it should be created before the curl command.Add the appropriate Kubernetes
apt
repository. If you want to use Kubernetes version different than v1.31, replace v1.31 with the desired minor version in the command below:# This overwrites any existing configuration in /etc/apt/sources.list.d/kubernetes.list echo 'deb [signed-by=/etc/apt/keyrings/kubernetes-apt-keyring.gpg] https://pkgs.k8s.io/core:/stable:/v1.31/deb/ /' | sudo tee /etc/apt/sources.list.d/kubernetes.list sudo chmod 644 /etc/apt/sources.list.d/kubernetes.list # helps tools such as command-not-found to work correctly
Note:
To upgrade kubectl to another minor release, you'll need to bump the version in/etc/apt/sources.list.d/kubernetes.list
before running apt-get update
and apt-get upgrade
. This procedure is described in more detail in Changing The Kubernetes Package Repository.Update
apt
package index, then install kubectl:sudo apt-get update sudo apt-get install -y kubectl
Add the Kubernetes
yum
repository. If you want to use Kubernetes version different than v1.31, replace v1.31 with the desired minor version in the command below.# This overwrites any existing configuration in /etc/yum.repos.d/kubernetes.repo cat <<EOF | sudo tee /etc/yum.repos.d/kubernetes.repo [kubernetes] name=Kubernetes baseurl=https://pkgs.k8s.io/core:/stable:/v1.31/rpm/ enabled=1 gpgcheck=1 gpgkey=https://pkgs.k8s.io/core:/stable:/v1.31/rpm/repodata/repomd.xml.key EOF
Note:
To upgrade kubectl to another minor release, you'll need to bump the version in/etc/yum.repos.d/kubernetes.repo
before running yum update
. This procedure is described in more detail in Changing The Kubernetes Package Repository.Install kubectl using
yum
:sudo yum install -y kubectl
Add the Kubernetes
zypper
repository. If you want to use Kubernetes version different than v1.31, replace v1.31 with the desired minor version in the command below.# This overwrites any existing configuration in /etc/zypp/repos.d/kubernetes.repo cat <<EOF | sudo tee /etc/zypp/repos.d/kubernetes.repo [kubernetes] name=Kubernetes baseurl=https://pkgs.k8s.io/core:/stable:/v1.31/rpm/ enabled=1 gpgcheck=1 gpgkey=https://pkgs.k8s.io/core:/stable:/v1.31/rpm/repodata/repomd.xml.key EOF
Note:
To upgrade kubectl to another minor release, you'll need to bump the version in/etc/zypp/repos.d/kubernetes.repo
before running zypper update
. This procedure is described in more detail in
Changing The Kubernetes Package Repository.Update
zypper
and confirm the new repo addition:sudo zypper update
When this message appears, press 't' or 'a':
New repository or package signing key received: Repository: Kubernetes Key Fingerprint: 1111 2222 3333 4444 5555 6666 7777 8888 9999 AAAA Key Name: isv:kubernetes OBS Project <isv:[email protected]> Key Algorithm: RSA 2048 Key Created: Thu 25 Aug 2022 01:21:11 PM -03 Key Expires: Sat 02 Nov 2024 01:21:11 PM -03 (expires in 85 days) Rpm Name: gpg-pubkey-9a296436-6307a177 Note: Signing data enables the recipient to verify that no modifications occurred after the data were signed. Accepting data with no, wrong or unknown signature can lead to a corrupted system and in extreme cases even to a system compromise. Note: A GPG pubkey is clearly identified by its fingerprint. Do not rely on the key's name. If you are not sure whether the presented key is authentic, ask the repository provider or check their web site. Many providers maintain a web page showing the fingerprints of the GPG keys they are using. Do you want to reject the key, trust temporarily, or trust always? [r/t/a/?] (r): a
Install kubectl using
zypper
:sudo zypper install -y kubectl
Install using other package management
If you are on Ubuntu or another Linux distribution that supports the snap package manager, kubectl is available as a snap application.
snap install kubectl --classic
kubectl version --client
If you are on Linux and using Homebrew package manager, kubectl is available for installation.
brew install kubectl
kubectl version --client
Verify kubectl configuration
In order for kubectl to find and access a Kubernetes cluster, it needs a
kubeconfig file,
which is created automatically when you create a cluster using
kube-up.sh
or successfully deploy a Minikube cluster.
By default, kubectl configuration is located at ~/.kube/config
.
Check that kubectl is properly configured by getting the cluster state:
kubectl cluster-info
If you see a URL response, kubectl is correctly configured to access your cluster.
If you see a message similar to the following, kubectl is not configured correctly or is not able to connect to a Kubernetes cluster.
The connection to the server <server-name:port> was refused - did you specify the right host or port?
For example, if you are intending to run a Kubernetes cluster on your laptop (locally), you will need a tool like Minikube to be installed first and then re-run the commands stated above.
If kubectl cluster-info
returns the url response but you can't access your cluster,
to check whether it is configured properly, use:
kubectl cluster-info dump
Troubleshooting the 'No Auth Provider Found' error message
In Kubernetes 1.26, kubectl removed the built-in authentication for the following cloud providers' managed Kubernetes offerings. These providers have released kubectl plugins to provide the cloud-specific authentication. For instructions, refer to the following provider documentation:
- Azure AKS: kubelogin plugin
- Google Kubernetes Engine: gke-gcloud-auth-plugin
(There could also be other reasons to see the same error message, unrelated to that change.)
Optional kubectl configurations and plugins
Enable shell autocompletion
kubectl provides autocompletion support for Bash, Zsh, Fish, and PowerShell, which can save you a lot of typing.
Below are the procedures to set up autocompletion for Bash, Fish, and Zsh.
Introduction
The kubectl completion script for Bash can be generated with the command kubectl completion bash
.
Sourcing the completion script in your shell enables kubectl autocompletion.
However, the completion script depends on
bash-completion,
which means that you have to install this software first
(you can test if you have bash-completion already installed by running type _init_completion
).
Install bash-completion
bash-completion is provided by many package managers
(see here).
You can install it with apt-get install bash-completion
or yum install bash-completion
, etc.
The above commands create /usr/share/bash-completion/bash_completion
,
which is the main script of bash-completion. Depending on your package manager,
you have to manually source this file in your ~/.bashrc
file.
To find out, reload your shell and run type _init_completion
.
If the command succeeds, you're already set, otherwise add the following to your ~/.bashrc
file:
source /usr/share/bash-completion/bash_completion
Reload your shell and verify that bash-completion is correctly installed by typing type _init_completion
.
Enable kubectl autocompletion
Bash
You now need to ensure that the kubectl completion script gets sourced in all your shell sessions. There are two ways in which you can do this:
echo 'source <(kubectl completion bash)' >>~/.bashrc
kubectl completion bash | sudo tee /etc/bash_completion.d/kubectl > /dev/null
sudo chmod a+r /etc/bash_completion.d/kubectl
If you have an alias for kubectl, you can extend shell completion to work with that alias:
echo 'alias k=kubectl' >>~/.bashrc
echo 'complete -o default -F __start_kubectl k' >>~/.bashrc
Note:
bash-completion sources all completion scripts in/etc/bash_completion.d
.Both approaches are equivalent. After reloading your shell, kubectl autocompletion should be working. To enable bash autocompletion in current session of shell, source the ~/.bashrc file:
source ~/.bashrc
Note:
Autocomplete for Fish requires kubectl 1.23 or later.The kubectl completion script for Fish can be generated with the command kubectl completion fish
. Sourcing the completion script in your shell enables kubectl autocompletion.
To do so in all your shell sessions, add the following line to your ~/.config/fish/config.fish
file:
kubectl completion fish | source
After reloading your shell, kubectl autocompletion should be working.
The kubectl completion script for Zsh can be generated with the command kubectl completion zsh
. Sourcing the completion script in your shell enables kubectl autocompletion.
To do so in all your shell sessions, add the following to your ~/.zshrc
file:
source <(kubectl completion zsh)
If you have an alias for kubectl, kubectl autocompletion will automatically work with it.
After reloading your shell, kubectl autocompletion should be working.
If you get an error like 2: command not found: compdef
, then add the following to the beginning of your ~/.zshrc
file:
autoload -Uz compinit
compinit
Install kubectl convert
plugin
A plugin for Kubernetes command-line tool kubectl
, which allows you to convert manifests between different API
versions. This can be particularly helpful to migrate manifests to a non-deprecated api version with newer Kubernetes release.
For more info, visit migrate to non deprecated apis
Download the latest release with the command:
curl -LO "https://dl.k8s.io/release/$(curl -L -s https://dl.k8s.io/release/stable.txt)/bin/linux/amd64/kubectl-convert"
curl -LO "https://dl.k8s.io/release/$(curl -L -s https://dl.k8s.io/release/stable.txt)/bin/linux/arm64/kubectl-convert"
Validate the binary (optional)
Download the kubectl-convert checksum file:
curl -LO "https://dl.k8s.io/release/$(curl -L -s https://dl.k8s.io/release/stable.txt)/bin/linux/amd64/kubectl-convert.sha256"
curl -LO "https://dl.k8s.io/release/$(curl -L -s https://dl.k8s.io/release/stable.txt)/bin/linux/arm64/kubectl-convert.sha256"
Validate the kubectl-convert binary against the checksum file:
echo "$(cat kubectl-convert.sha256) kubectl-convert" | sha256sum --check
If valid, the output is:
kubectl-convert: OK
If the check fails,
sha256
exits with nonzero status and prints output similar to:kubectl-convert: FAILED sha256sum: WARNING: 1 computed checksum did NOT match
Note:
Download the same version of the binary and checksum.Install kubectl-convert
sudo install -o root -g root -m 0755 kubectl-convert /usr/local/bin/kubectl-convert
Verify plugin is successfully installed
kubectl convert --help
If you do not see an error, it means the plugin is successfully installed.
After installing the plugin, clean up the installation files:
rm kubectl-convert kubectl-convert.sha256
What's next
- Install Minikube
- See the getting started guides for more about creating clusters.
- Learn how to launch and expose your application.
- If you need access to a cluster you didn't create, see the Sharing Cluster Access document.
- Read the kubectl reference docs