Fuzzing, which is simply providing potentially invalid, unexpected, or random data as an input to a program, is an extremely effective way of finding bugs in large software systems, and is an important part of the software development life cycle.
Android's build system supports fuzzing through the inclusion of libFuzzer from the LLVM compiler infrastructure project project. LibFuzzer is linked with the library under test and handles all input selection, mutation, and crash reporting that occurs during a fuzzing session. LLVM's sanitizers are used to aid in memory corruption detection and code coverage metrics.
This article provides an introduction to libFuzzer on Android and how to perform an instrumented build. It also includes instructions to write, run, and customize fuzzers.
Setup and build
To ensure you have a working image running on a device, you can download a factory image and flash the device. Alternatively, you can download the AOSP source code and follow the setup and build example below.
Setup example
This example assumes the target device is a Pixel (taimen
) and is
already prepared for USB debugging (aosp_taimen-userdebug
). You
can download other Pixel binaries from Driver Binaries.
mkdir ~/bin
export PATH=~/bin:$PATH
curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
chmod a+x ~/bin/repo
repo init -u https://android.googlesource.com/platform/manifest -b main
repo sync -c -j8
wget https://dl.google.com/dl/android/aosp/google_devices-taimen-qq1a.191205.008-f4537f93.tgz
tar xvf google_devices-taimen-qq1a.191205.008-f4537f93.tgz
./extract-google_devices-taimen.sh
wget https://dl.google.com/dl/android/aosp/qcom-taimen-qq1a.191205.008-760afa6e.tgz
tar xvf qcom-taimen-qq1a.191205.008-760afa6e.tgz
./extract-qcom-taimen.sh
. build/envsetup.sh
lunch aosp_taimen-userdebug
Build example
The first step of running fuzz targets is to get a fresh system image. We recommend being at least on the latest development version of Android.
- Perform the initial build by issuing:
m
- To allow you to flash your device, boot your device into fastboot mode using the appropriate key combination.
- Unlock the bootloader and flash the newly compiled image with the following
commands.
fastboot oem unlock
fastboot flashall
The target device should now be ready for libFuzzer fuzzing.
Write a fuzzer
To illustrate writing an end-to-end fuzzer using libFuzzer in Android, use the following vulnerable code as a test case. This helps to test the fuzzer, ensure everything is working correctly, and illustrate what crash data looks like.
Here is the test function.
#include <stdint.h> #include <stddef.h> bool FuzzMe(const char *data, size_t dataSize) { return dataSize >= 3 && data[0] == 'F' && data[1] == 'U' && data[2] == 'Z' && data[3] == 'Z'; // ← Out of bounds access }
To build and run this test fuzzer:
- A fuzz target consists of two files: a build file and the fuzz target source code. Create your files in a location next to the library you are fuzzing. Give the fuzzer a name that describes what the fuzzer does.
- Write a fuzz target using libFuzzer. The fuzz target is a function that
takes a blob of data of a specified size and passes it to the function to be
fuzzed. Here's a basic fuzzer for the vulnerable test function:
#include <stddef.h> #include <stdint.h> extern "C" int LLVMFuzzerTestOneInput(const char *data, size_t size) { // ... // Use the data to call the library you are fuzzing. // ... return FuzzMe(data, size); }
- Tell Android's build system to create the fuzzer binary.
To build the fuzzer, add this code to the
Android.bp
file:cc_fuzz { name: "fuzz_me_fuzzer", srcs: [ "fuzz_me_fuzzer.cpp", ], // If the fuzzer has a dependent library, uncomment the following section and // include it. // static_libs: [ // "libfoo", // Dependent library // ], // // The advanced features below allow you to package your corpus and // dictionary files during building. You can find more information about // these features at: // - Corpus: https://llvm.org/docs/LibFuzzer.html#corpus // - Dictionaries: https://llvm.org/docs/LibFuzzer.html#dictionaries // These features are not required for fuzzing, but are highly recommended // to gain extra coverage. // To include a corpus folder, uncomment the following line. // corpus: ["corpus/*"], // To include a dictionary, uncomment the following line. // dictionary: "fuzz_me_fuzzer.dict", }
- To make the fuzzer for running on target (Device):
SANITIZE_TARGET=hwaddress m fuzz_me_fuzzer
- To make the fuzzer for running on host:
SANITIZE_HOST=address m fuzz_me_fuzzer
For convenience, define some shell variables containing the path to your fuzz target and the name of the binary (from the build file you wrote earlier).
export FUZZER_NAME=your_fuzz_target
After following these steps, you should have a built fuzzer. The default location for the fuzzer (for this example Pixel build) is:
Run your fuzzer on host
host_supported: true,Note that this can be applied only if the library you wish to fuzz is host supported.
$ANDROID_HOST_OUT/fuzz/x86_64/$FUZZER_NAME/$FUZZER_NAME
Run your fuzzer on device
We want to copy this over to your device using adb
.
- To upload these files to a directory on the device, run these
commands:
adb root
adb sync data
- Run the test fuzzer on device with this command:
adb shell /data/fuzz/$(get_build_var TARGET_ARCH)/$FUZZER_NAME/$FUZZER_NAME \ /data/fuzz/$(get_build_var TARGET_ARCH)/$FUZZER_NAME/corpus
This results in output similar to the example output below.
INFO: Seed: 913963180 INFO: Loaded 2 modules (16039 inline 8-bit counters): 16033 [0x7041769b88, 0x704176da29), 6 [0x60e00f4df0, 0x60e00f4df6), INFO: Loaded 2 PC tables (16039 PCs): 16033 [0x704176da30,0x70417ac440), 6 [0x60e00f4df8,0x60e00f4e58), INFO: -max_len is not provided; libFuzzer will not generate inputs larger than 4096 bytes INFO: A corpus is not provided, starting from an empty corpus #2 INITED cov: 5 ft: 5 corp: 1/1b exec/s: 0 rss: 24Mb #10 NEW cov: 6 ft: 6 corp: 2/4b lim: 4 exec/s: 0 rss: 24Mb L: 3/3 MS: 3 CopyPart-ChangeByte-InsertByte- #712 NEW cov: 7 ft: 7 corp: 3/9b lim: 8 exec/s: 0 rss: 24Mb L: 5/5 MS: 2 InsertByte-InsertByte- #744 REDUCE cov: 7 ft: 7 corp: 3/7b lim: 8 exec/s: 0 rss: 25Mb L: 3/3 MS: 2 ShuffleBytes-EraseBytes- #990 REDUCE cov: 8 ft: 8 corp: 4/10b lim: 8 exec/s: 0 rss: 25Mb L: 3/3 MS: 1 ChangeByte- ==18631==ERROR: HWAddressSanitizer: tag-mismatch on address 0x0041e00b4183 at pc 0x0060e00c5144 READ of size 1 at 0x0041e00b4183 tags: f8/03 (ptr/mem) in thread T0 #0 0x60e00c5140 (/data/fuzz/arm64/example_fuzzer/example_fuzzer+0xf140) #1 0x60e00ca130 (/data/fuzz/arm64/example_fuzzer/example_fuzzer+0x14130) #2 0x60e00c9b8c (/data/fuzz/arm64/example_fuzzer/example_fuzzer+0x13b8c) #3 0x60e00cb188 (/data/fuzz/arm64/example_fuzzer/example_fuzzer+0x15188) #4 0x60e00cbdec (/data/fuzz/arm64/example_fuzzer/example_fuzzer+0x15dec) #5 0x60e00d8fbc (/data/fuzz/arm64/example_fuzzer/example_fuzzer+0x22fbc) #6 0x60e00f0a98 (/data/fuzz/arm64/example_fuzzer/example_fuzzer+0x3aa98) #7 0x7041b75d34 (/data/fuzz/arm64/lib/libc.so+0xa9d34) [0x0041e00b4180,0x0041e00b41a0) is a small allocated heap chunk; size: 32 offset: 3 0x0041e00b4183 is located 0 bytes to the right of 3-byte region [0x0041e00b4180,0x0041e00b4183) allocated here: #0 0x70418392bc (/data/fuzz/arm64/lib/libclang_rt.hwasan-aarch64-android.so+0x212bc) #1 0x60e00ca040 (/data/fuzz/arm64/example_fuzzer/example_fuzzer+0x14040) #2 0x60e00c9b8c (/data/fuzz/arm64/example_fuzzer/example_fuzzer+0x13b8c) #3 0x60e00cb188 (/data/fuzz/arm64/example_fuzzer/example_fuzzer+0x15188) #4 0x60e00cbdec (/data/fuzz/arm64/example_fuzzer/example_fuzzer+0x15dec) #5 0x60e00d8fbc (/data/fuzz/arm64/example_fuzzer/example_fuzzer+0x22fbc) #6 0x60e00f0a98 (/data/fuzz/arm64/example_fuzzer/example_fuzzer+0x3aa98) #7 0x7041b75d34 (/data/fuzz/arm64/lib/libc.so+0xa9d34) #8 0x60e00c504c (/data/fuzz/arm64/example_fuzzer/example_fuzzer+0xf04c) #9 0x70431aa9c4 (/data/fuzz/arm64/example_fuzzer/example_fuzzer+0x519c4) Thread: T1 0x006700006000 stack: [0x007040c55000,0x007040d4ecc0) sz: 1023168 tls: [0x000000000000,0x000000000000) Thread: T0 0x006700002000 stack: [0x007fe51f3000,0x007fe59f3000) sz: 8388608 tls: [0x000000000000,0x000000000000) Memory tags around the buggy address (one tag corresponds to 16 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 00 cf 08 dc 08 cd 08 b9 08 1a 1a 0b 00 04 3f => 27 00 08 00 bd bd 2d 07 [03] 73 66 66 27 27 20 f6 <= 5b 5b 87 87 03 00 01 00 4f 04 24 24 03 39 2c 2c 05 00 04 00 be be 85 85 04 00 4a 4a 05 05 5f 5f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Tags for short granules around the buggy address (one tag corresponds to 16 bytes): 04 .. .. cf .. dc .. cd .. b9 .. .. 3f .. 57 .. => .. .. 21 .. .. .. .. 2d [f8] .. .. .. .. .. .. .. <= .. .. .. .. 9c .. e2 .. .. 4f .. .. 99 .. .. .. See https://clang.llvm.org/docs/HardwareAssistedAddressSanitizerDesign.html#short-granules for a description of short granule tags Registers where the failure occurred (pc 0x0060e00c5144): x0 f8000041e00b4183 x1 000000000000005a x2 0000000000000006 x3 000000704176d9c0 x4 00000060e00f4df6 x5 0000000000000004 x6 0000000000000046 x7 000000000000005a x8 00000060e00f4df0 x9 0000006800000000 x10 0000000000000001 x11 00000060e0126a00 x12 0000000000000001 x13 0000000000000231 x14 0000000000000000 x15 000e81434c909ede x16 0000007041838b14 x17 0000000000000003 x18 0000007042b80000 x19 f8000041e00b4180 x20 0000006800000000 x21 000000000000005a x22 24000056e00b4000 x23 00000060e00f5200 x24 00000060e0128c88 x25 00000060e0128c20 x26 00000060e0128000 x27 00000060e0128000 x28 0000007fe59f16e0 x29 0000007fe59f1400 x30 00000060e00c5144 SUMMARY: HWAddressSanitizer: tag-mismatch (/data/fuzz/arm64/example_fuzzer/example_fuzzer+0xf140) MS: 1 ChangeByte-; base unit: e09f9c158989c56012ccd88111b82f778a816eae 0x46,0x55,0x5a, FUZ artifact_prefix='./'; Test unit written to ./crash-0eb8e4ed029b774d80f2b66408203801cb982a60 Base64: RlVa
In the example output, the crash was caused by fuzz_me_fuzzer.cpp
at line 10:
data[3] == 'Z'; // :(
This is a straightforward out-of-bounds read if data
is of length 3.
After you run your fuzzer, the output often results in a crash and the offending
input is saved in the corpus and given an ID. In the example output, this is
crash-0eb8e4ed029b774d80f2b66408203801cb982a60
.
To retrieve crash information when fuzzing on device, issue this command, specifying your crash ID:
adb pull /data/fuzz/arm64/fuzz_me_fuzzer/corpus/CRASH_IDNote that to get testcases to be saved to the right directory, you can use the corpus folder (as in the example above) or use the artifact_prefix argument (e.g. `-artifact_prefix=/data/fuzz/where/my/crashes/go`).
When fuzzing on host, crash information appears in the crash folder in the local folder where the fuzzer is being run.
Generate line coverage
Line coverage is very useful for developers as they can pinpoint areas in the code that aren't covered and update their fuzzers accordingly to hit those areas in future fuzzing runs.
- In order to generate fuzzer coverage reports, run the following steps :
CLANG_COVERAGE=true NATIVE_COVERAGE_PATHS='*' make ${FUZZER_NAME}
- After pushing the fuzzer and its dependencies to the device, run the fuzz target with
LLVM_PROFILE_FILE
as follows:DEVICE_TRACE_PATH=/data/fuzz/$(get_build_var TARGET_ARCH)/${FUZZER_NAME}/data.profraw
adb shell LLVM_PROFILE_FILE=${DEVICE_TRACE_PATH} /data/fuzz/$(get_build_var TARGET_ARCH)/${FUZZER_NAME}/${FUZZER_NAME} -runs=1000
- Produce the coverage report by first pulling the profraw file out from the device and then generating the html report to a folder called coverage-html as shown below:
adb pull ${DEVICE_TRACE_PATH} data.profraw
llvm-profdata merge --sparse data.profraw --output data.profdata
llvm-cov show --format=html --instr-profile=data.profdata \ symbols/data/fuzz/$(get_build_var TARGET_ARCH)/${FUZZER_NAME}/${FUZZER_NAME} \ --output-dir=coverage-html --path-equivalence=/proc/self/cwd/,$ANDROID_BUILD_TOP