![](https://help.apple.com/assets/626AF41951D72B702C4A6AE1/626AF41C51D72B702C4A6AF7/en_GB/353fefd30e4fbee9565a61286b7a524e.png)
Adjust volume and pan levels with Logic Remote on iPad
You use the Logic Remote Mixer controls to adjust a track’s volume level and pan position. You can also control the overall project volume.
Adjust a track’s volume
In Logic Remote, do one of the following:
Drag the Volume fader up or down to raise or lower the volume.
Double-tap the Volume fader (or the area above or below the fader) to reset the volume to a neutral setting (0 dB).
Tap the peak level display above one of the level meters to reset all the peak level displays.
Tip: To check the volume level at any point, tap the area above or below the Volume fader. The volume level momentarily replaces the track number.
Adjust the overall volume of a project
Drag the Master Volume fader up or down to raise or lower the volume.
Double-tap the Master Volume fader (or the area above or below the fader) to reset the volume to a neutral setting (0 dB).
Note: This fader corresponds to the Master Volume slider in the GarageBand control bar.
Adjust a track’s pan position
In Logic Remote, do one of the following:
Drag the Pan/Balance knob left or right.
Double-tap the Pan/Balance knob to reset it to the centre position.