Gas Turbine Propulsion Systems
By Bernie MacIsaac and Roy Langton
()
About this ebook
Chapters include aircraft engine systems functional overview, marine propulsion systems, fuel control and power management systems, engine lubrication and scavenging systems, nacelle and ancillary systems, engine certification, unique engine systems and future developments in gas turbine propulsion systems. The authors also present examples of specific engines and applications.
Written from a wholly practical perspective by two authors with long careers in the gas turbine & fuel systems industries, Gas Turbine Propulsion Systems provides an excellent resource for project and program managers in the gas turbine engine community, the aircraft OEM community, and tier 1 equipment suppliers in Europe and the United States. It also offers a useful reference for students and researchers in aerospace engineering.
Related to Gas Turbine Propulsion Systems
Titles in the series (37)
Morphing Aerospace Vehicles and Structures Rating: 0 out of 5 stars0 ratingsPrinciples of Flight for Pilots Rating: 4 out of 5 stars4/5Stability and Control of Aircraft Systems: Introduction to Classical Feedback Control Rating: 0 out of 5 stars0 ratingsAircraft Fuel Systems Rating: 0 out of 5 stars0 ratingsAdvanced Control of Aircraft, Spacecraft and Rockets Rating: 4 out of 5 stars4/5Air Travel and Health: A Systems Perspective Rating: 0 out of 5 stars0 ratingsGas Turbine Propulsion Systems Rating: 0 out of 5 stars0 ratingsBasic Helicopter Aerodynamics Rating: 5 out of 5 stars5/5Modelling and Managing Airport Performance Rating: 0 out of 5 stars0 ratingsAircraft Systems: Mechanical, Electrical, and Avionics Subsystems Integration Rating: 4 out of 5 stars4/5Aircraft Systems Integration of Air-Launched Weapons Rating: 0 out of 5 stars0 ratingsSense and Avoid in UAS: Research and Applications Rating: 5 out of 5 stars5/5Theory of Lift: Introductory Computational Aerodynamics in MATLAB/Octave Rating: 5 out of 5 stars5/5Understanding Aerodynamics: Arguing from the Real Physics Rating: 5 out of 5 stars5/5Design and Development of Aircraft Systems Rating: 5 out of 5 stars5/5System Health Management: with Aerospace Applications Rating: 0 out of 5 stars0 ratingsIntroduction to UAV Systems Rating: 5 out of 5 stars5/5Aircraft Control Allocation Rating: 0 out of 5 stars0 ratingsAerospace Propulsion Rating: 0 out of 5 stars0 ratingsComputational Modelling and Simulation of Aircraft and the Environment, Volume 1: Platform Kinematics and Synthetic Environment Rating: 0 out of 5 stars0 ratingsAdvanced UAV Aerodynamics, Flight Stability and Control: Novel Concepts, Theory and Applications Rating: 5 out of 5 stars5/5Introduction to Antenna Placement and Installation Rating: 0 out of 5 stars0 ratingsAircraft Aerodynamic Design: Geometry and Optimization Rating: 0 out of 5 stars0 ratingsPrinciples of Flight Simulation Rating: 0 out of 5 stars0 ratingsIntroduction to Nonlinear Aeroelasticity Rating: 0 out of 5 stars0 ratingsModeling the Effect of Damage in Composite Structures: Simplified Approaches Rating: 0 out of 5 stars0 ratingsSmall Unmanned Fixed-wing Aircraft Design: A Practical Approach Rating: 0 out of 5 stars0 ratingsDifferential Game Theory with Applications to Missiles and Autonomous Systems Guidance Rating: 0 out of 5 stars0 ratingsAdaptive Aeroservoelastic Control Rating: 0 out of 5 stars0 ratingsRemotely Piloted Aircraft Systems: A Human Systems Integration Perspective Rating: 0 out of 5 stars0 ratings
Related ebooks
Design and Development of Aircraft Systems Rating: 5 out of 5 stars5/5Sense and Avoid in UAS: Research and Applications Rating: 5 out of 5 stars5/5Aircraft Systems: Mechanical, Electrical, and Avionics Subsystems Integration Rating: 4 out of 5 stars4/5Basic Gas Turbines Rating: 0 out of 5 stars0 ratingsAerospace Propulsion Rating: 0 out of 5 stars0 ratingsBasic Helicopter Aerodynamics Rating: 5 out of 5 stars5/5Morphing Aerospace Vehicles and Structures Rating: 0 out of 5 stars0 ratingsUnderstanding Aerodynamics: Arguing from the Real Physics Rating: 5 out of 5 stars5/5Aircraft Aerodynamic Design: Geometry and Optimization Rating: 0 out of 5 stars0 ratingsAviation Maintenance Technician Handbook—Airframe (2024): FAA-H-8083-31B Rating: 0 out of 5 stars0 ratingsAircraft Systems Integration of Air-Launched Weapons Rating: 0 out of 5 stars0 ratingsSystem Health Management: with Aerospace Applications Rating: 0 out of 5 stars0 ratingsTheory of Lift: Introductory Computational Aerodynamics in MATLAB/Octave Rating: 5 out of 5 stars5/5Conceptual Design of Green Transport Airplanes Rating: 0 out of 5 stars0 ratingsAviation Maintenance Technician: Powerplant Rating: 4 out of 5 stars4/5Modeling the Effect of Damage in Composite Structures: Simplified Approaches Rating: 0 out of 5 stars0 ratingsAviation Maintenance Technician Handbook—Powerplant (2024): FAA-H-8083-32B Rating: 0 out of 5 stars0 ratingsAdvanced Control of Aircraft, Spacecraft and Rockets Rating: 4 out of 5 stars4/5Aviation Mechanic Series: Airframe Systems Rating: 0 out of 5 stars0 ratingsAviation Engines Design—Construction—Operation and Repair Rating: 0 out of 5 stars0 ratingsAircraft Fuel Systems Rating: 0 out of 5 stars0 ratingsDevelopment of Aircraft Certification Requirements Rating: 0 out of 5 stars0 ratingsPrinciples of Flight Simulation Rating: 0 out of 5 stars0 ratingsEngineering Analysis of Flight Vehicles Rating: 5 out of 5 stars5/5Introduction to Fly-By-Wire Flight Control Systems Rating: 5 out of 5 stars5/5Flight Test: the Discipline: A Comprehensive Exploration of the Basic Tenets of Flight Test as a Discipline and Profession. Rating: 0 out of 5 stars0 ratingsPowering the World's Airliners: Engine Developments from the Propeller to the Jet Age Rating: 0 out of 5 stars0 ratingsSteady Aircraft Flight and Performance Rating: 5 out of 5 stars5/5An Introduction to Aeronautical Structures for Managers Rating: 0 out of 5 stars0 ratingsIntroduction to UAV Systems Rating: 5 out of 5 stars5/5
Science & Mathematics For You
What If?: Serious Scientific Answers to Absurd Hypothetical Questions Rating: 5 out of 5 stars5/5Becoming Cliterate: Why Orgasm Equality Matters--And How to Get It Rating: 4 out of 5 stars4/5Feeling Good: The New Mood Therapy Rating: 4 out of 5 stars4/5The Source: The Secrets of the Universe, the Science of the Brain Rating: 4 out of 5 stars4/5Sapiens: A Brief History of Humankind Rating: 4 out of 5 stars4/5Outsmart Your Brain: Why Learning is Hard and How You Can Make It Easy Rating: 4 out of 5 stars4/5Mothers Who Can't Love: A Healing Guide for Daughters Rating: 4 out of 5 stars4/5The Big Book of Hacks: 264 Amazing DIY Tech Projects Rating: 4 out of 5 stars4/5Blitzed: Drugs in the Third Reich Rating: 4 out of 5 stars4/5The Dorito Effect: The Surprising New Truth About Food and Flavor Rating: 4 out of 5 stars4/5The Gulag Archipelago: The Authorized Abridgement Rating: 4 out of 5 stars4/5The Gulag Archipelago [Volume 1]: An Experiment in Literary Investigation Rating: 4 out of 5 stars4/5The Confidence Code: The Science and Art of Self-Assurance---What Women Should Know Rating: 4 out of 5 stars4/5Memory Craft: Improve Your Memory with the Most Powerful Methods in History Rating: 3 out of 5 stars3/5A Letter to Liberals: Censorship and COVID: An Attack on Science and American Ideals Rating: 3 out of 5 stars3/5First, We Make the Beast Beautiful: A New Journey Through Anxiety Rating: 4 out of 5 stars4/5The Systems Thinker: Essential Thinking Skills For Solving Problems, Managing Chaos, Rating: 4 out of 5 stars4/5The Invisible Rainbow: A History of Electricity and Life Rating: 5 out of 5 stars5/5American Carnage: On the Front Lines of the Republican Civil War and the Rise of President Trump Rating: 4 out of 5 stars4/5On Food and Cooking: The Science and Lore of the Kitchen Rating: 5 out of 5 stars5/5Lies My Gov't Told Me: And the Better Future Coming Rating: 4 out of 5 stars4/5Oppenheimer: The Tragic Intellect Rating: 5 out of 5 stars5/5Other Minds: The Octopus, the Sea, and the Deep Origins of Consciousness Rating: 4 out of 5 stars4/5Homo Deus: A Brief History of Tomorrow Rating: 4 out of 5 stars4/5A Crack In Creation: Gene Editing and the Unthinkable Power to Control Evolution Rating: 4 out of 5 stars4/5Our Kind of People: Inside America's Black Upper Class Rating: 3 out of 5 stars3/5How Emotions Are Made: The Secret Life of the Brain Rating: 4 out of 5 stars4/5The Big Fat Surprise: Why Butter, Meat and Cheese Belong in a Healthy Diet Rating: 4 out of 5 stars4/5Free Will Rating: 4 out of 5 stars4/5Activate Your Brain: How Understanding Your Brain Can Improve Your Work - and Your Life Rating: 4 out of 5 stars4/5
Reviews for Gas Turbine Propulsion Systems
0 ratings0 reviews
Book preview
Gas Turbine Propulsion Systems - Bernie MacIsaac
Chapter 1
Introduction
The modern gas turbine engine used for aircraft propulsion is a complex machine comprising many systems and subsystems that are required to operate together as a complex integrated entity. The complexity of the gas turbine propulsion engine has evolved over a period of more than 70 years. Today, these machines can be seen in a wide range of applications from small auxiliary power units (APUs) delivering shaft power to sophisticated vectored thrust engines in modern fighter aircraft.
The military imperative of air superiority was the driving force behind the development of the gas turbine for aircraft propulsion. It had to be lighter, smaller and, above all, it had to provide thrust in a form which would allow higher aircraft speed. Since aircraft propulsion is, by definition, a reaction to a flow of air or gas created by a prime mover, the idea of using a gas turbine to create a hot jet was first suggested by Sir Frank Whittle in 1929. He applied for and obtained a patent on the idea in 1930. He attracted commercial interests in the idea in 1935 and set up Power Jets Ltd. to develop a demonstrator engine which first ran in 1937. By 1939, the British Air Ministry became interested enough to support a flight demonstration. They contracted Power Jets Ltd. for the engine and the Gloucester Aircraft Co. to build an experimental aircraft. Its first flight took place on 15 May 1941. This historic event ushered in the jet age.
1.1 Gas Turbine Concepts
Operation of the gas turbine engine is illustrated by the basic concept shown schematically in Figure 1.1. This compressor-turbine ‘bootstrap’ arrangement becomes self-sustaining above a certain rotational speed. As additional fuel is added speed increases and excess ‘gas horsepower’ is generated. The gas horsepower delivered by a gas generator can be used in various engine design arrangements for the production of thrust or shaft power, as will be covered in the ensuing discussion.
Figure 1.1 Gas turbine basics – the gas generator.
1.1In its simplest form, the high-energy gases exit through a jet pipe and nozzle as in a pure turbojet engine (the Whittle concept). This produces a very high velocity jet which, while compact, results in relatively low propulsion efficiency. Such an arrangement is suitable for high-speed military airplanes which need a small frontal area to minimize drag.
The next most obvious arrangement, especially as seen from a historical perspective, is the single-shaft turbine engine driving a propeller directly (see the schematic in Figure 1.2). As indicated by the figure the turbine converts all of the available energy into shaft power, some of which is consumed by the compressor; the remainder is used to drive the propeller. This arrangement requires a reduction gearbox in order to obtain optimum propeller speed. Furthermore, the desirability of a traction propeller favors the arrangement whereby the gearbox is attached to the engine in front of the compressor.
Figure 1.2 Typical single-shaft engine arrangement.
1.2The Rolls-Royce Dart is an early and very successful example of this configuration. This engine comprises a two-stage centrifugal compressor with a modest pressure ratio of about 6:1 and a two-stage turbine. The propeller drive is through the front of the engine via an in-line epicyclic reduction gearbox. The Dart entered service in 1953 delivering 1800 shaft horsepower (SHP). Later versions of the engine were capable of up to 3000 SHP and the engine remained in production until 1986.
Today, single-shaft gas turbines are mostly confined to low power (less than 1000 SHP) propulsion engines and APUs where simplicity and low cost are major design drivers. There are some notable exceptions, however, one of which is the Garrett (previously Allied Signal and now Honeywell) TPE331 Turboprop which has been up-rated to more than 1600 SHP and continues to win important new programs, particularly in the growing unmanned air vehicle (UAV) market.
This engine is similar in concept to the Dart engine mentioned above, as illustrated by the schematic of Figure 1.3. The significant differences are the reverse-flow combustor which reduces the length of the engine and the reduction gear configuration which uses a spur-gear and lay-shaft arrangement that moves the propeller centerline above that of the turbine machinery, thus supporting a low air inlet.
Figure 1.3 TPE331 turboprop schematic.
1.3A more common alternative to the direct-drive or single-shaft arrangement described above uses a separate power turbine to absorb the available gas horsepower from the gas generator.
Since the power turbine is now mechanically decoupled from the gas generator shaft, it is often referred to as a ‘free turbine’.
For the purposes of driving a propeller, this configuration (as shown in Figure 1.4) indicates a requirement for a long slender shaft driving through a hollow gas turbine shaft to the front-mounted gearbox. Such a configuration carries with it the problems of shaft stability, both lateral and torsional, together with more complex bearing arrangements.
Figure 1.4 The free turbine turboprop engine.
1.4In their turboprop concept, Pratt & Whitney Canada chose to ‘fly the engine backwards’ by arranging for sophisticated ducting for the inlet and exhaust while benefitting from the stiffness and robustness of a very short drive shaft through a reduction gearbox. Their engine, the PT-6 in its many configurations, is one of the most reliable aircraft gas turbines ever built. It has an exceedingly low in-flight incident rate and has sold over 40 000 copies. It was first introduced in 1964 and is still very much in production. A conceptual drawing of the PT-6 engine is shown in Figure 1.5.
Figure 1.5 A sectional drawing of the PWA PT-6 turboprop engine.
1.5The pure turbojet produces a high-velocity jet, which offers poor propulsion efficiency with the singular advantage of higher aircraft speed, and the turboprop produces good propulsive efficiency but only at a relatively low top aircraft speed. The two configurations can however be combined to produce the turbofan engine, depicted in Figure 1.6. As is indicated in this figure, the front-mounted fan is driven by a shaft connected through the core of the engine to the second or low-pressure turbine which can be likened to the free turbine of the turboprop application. Some of the fan flow pressurizes the compressor while the remainder is expelled through a so-called ‘cold nozzle’ delivering thrust directly. Such an arrangement can produce high thrust and good propulsive efficiency, and this engine concept is one of the most common types in commercial service today.
Figure 1.6 The turbofan engine configuration.
1.6Another important configuration used in aircraft propulsion is the twin-spool turbojet engine which is essentially a twin-spool gas generator with a jet pipe and exhaust nozzle. If a second turbine can drive a large fan, it can also drive a multistage compressor with an output which is entirely swallowed by the downstream compressor. This configuration is shown in Figure 1.7.
Figure 1.7 The twin-spool turbojet engine configuration.
1.7So far in this discussion, we have assumed that the thermodynamic processes of compression and expansion are ideal and that there is no apparent limit to the magnitude of the pressure that can be obtained. In addition, we have not considered how the heat is going to be delivered to the gas to raise its temperature.
The practical implementation of the gas turbine involves turbomachinery of finite efficiency and an internal combustion process that adds heat through the burning of a hydrocarbon fuel in a combustion chamber which must be small and compact.
Throughout its development, there have been enduring themes which place specific technologies in the vanguard of engine development. The first of these themes is engine performance: the capacity of the engine to produce thrust with sufficient thermal efficiency to provide an airplane with an acceptable range while carrying a useful payload. The response to this requirement is found in the techniques of internal aerodynamics and combustion.
Saravanamuttoo et al. [1] provide a comprehensive treatment of gas turbine performance. Simple cycle calculations highlight the need for high overall engine pressure ratios and high turbine temperatures for good efficiency to be achieved. Similarly, high specific thrust demands high isentropic efficiency of each major component. Finally, size matters. In order to achieve high levels of thrust, high air flow rates must be obtained. This argues powerfully for large axial flow turbomachinery. This is very much a pacing item, since the design of such machines is very complex and the investments in equipment and facilities required to complete the development are very large indeed.
A similar argument can be made for combustion technologies. The compressor must deliver a uniform flow of air at high pressure to a combustion chamber. Fuel must be introduced into the combustor in sufficient quantities to raise the average temperature by at least 1200 °F. Assuming that the combustion process takes place at nearly stoichiometric conditions, localized temperatures in excess of 3500 °F can be expected. Excess air is essential in the gas turbine combustor to cool the flame to acceptable levels while, at the same time, mixing the hot gas to deliver a uniform, high-temperature gas to the throat of the turbine. Finally, in the interests of weight and overall engine stiffness and robustness, the combustor must be kept as short as possible. Again, this is a technology which relies heavily on experiment which, in turn, involves large investments in equipment and facilities.
The second major theme that runs throughout the development of the jet engine is that of longer life and improved reliability. This requirement has driven a relentless quest for improved materials and design methodologies. The basic need is for turbine components capable of operating continuously at elevated temperatures. (Turbine inlet temperatures for uncooled blades can run as high as 2500 °F.) Both blades and disks must be capable of withstanding the enormous stresses imposed by rotational speeds which push the materials past the elastic limit, thereby encountering low cyclic fatigue. This must be understood well enough to ensure reasonable life as well as removal before safety concerns overtake them.
The twin themes of continuous improvements in aerothermodynamics and in materials would suggest that the gas turbine engine, while sophisticated, is actually a very simple machine. In fact, the quest for improved performance has led designers to a remarkable number of variations in engine configuration. Each configuration, when matched to the airframe for which it was designed, offers a different balance between fuel efficiency, specific thrust and overall propulsive efficiency. Single-, twin- and triple-spool engine configurations have been developed with attendant increases in the complexity of bearing and lubrication systems. The turbofan engine has become the workhorse of the civil aviation industry with sophisticated thrust management, including thrust reversal and power extraction to drive a variety of accessories. The gas turbine engine has therefore emerged as a sophisticated and complex machine requiring a systems approach to its design and development.
1.2 Gas Turbine Systems Overview
In order to provide the reader with a basic knowledge, the gas turbine engine aerothermodynamic principles described in Chapter 2 of this book provide insight into some of the challenges associated with the fundamentals of gas turbine design, operation and control. A more detailed treatment of axial compressor design concepts, including compressor performance analysis and the principles of compressor performance map estimation, are included as Appendices A and B, respectively. For completeness, thermodynamic modeling of the gas turbine engine is described in Appendix C.
While there are many systems and subsystems that make up the gas turbine-based propulsion power plant, perhaps the most critical function is performed by the fuel control system.
This system must provide high-pressure fuel to the combustor of the gas generator or ‘core’ section of the engine over the complete operational envelope, while protecting the machine from temperature, pressure and speed exceedances for any combination of dynamic and steady-state operation.
In addition, the fuel control system may be required to manage airflow though the compressor by modulating compressor stator vanes and bleed valves.
The gas generator produces high-energy gases as its output, sometimes referred to as gas horsepower or gas torque, which can be converted into direct thrust or shaft power.
In military aircraft with thrust augmentation (afterburning), the fuel control system is also required to control afterburner fuel delivery together with the control of exhaust nozzle exit area in order to maintain stable gas generator operation.
Secondary functions of the fuel control system include cooling of the engine lubricating oil and, in some applications, providing a source of high-pressure fuel to the airframe to act as motive flow to the aircraft fuel system ejector pumps [2].
In view of the complexity and extent of the fuel control system issues, this important topic is covered in three separate chapters as follows.
1. The fuel control of the gas generator section, including acceleration and deceleration limiting, speed governing and exceedance protection, is covered in Chapter 3.
2. Thrust engine fuel control issues, including thrust management and augmentation, are described in Chapter 4.
3. Fuel control and management of shaft power engines, including turboprop and turboshaft applications, are presented in Chapter 5.
Since major performance issues associated with fuel control systems design involve dynamic response and stability analyses, Appendix D is provided as a primer on classical feedback control.
In commercial aircraft it is standard practice to install many of the engine subsystems and associated major components as part of an engine, nacelle and strut assembly. This integrated nacelle/engine package is then delivered to the airframe final assembly line for installation into the aircraft.
For reasons of aerodynamic performance or stealth, military aircraft are more likely to integrate the propulsion system assembly more closely with the fuselage.
While the primary function of the engine installation arrangement is to provide efficient and effective air inlet and exhaust for the gas turbine engine, provisions for minimizing engine compressor noise propagation as well as ventilation and cooling of the installation must also be considered. The thrust reversing mechanism, including actuators and nozzle flow diversion devices, is also typically installed at the nacelle or propulsion system assembly stage.
Supersonic applications present a special case to the propulsion system designer. Here the task of recovering free stream energy efficiently to the engine inlet face requires the management of shock-wave position within the inlet through the control of inlet geometry. While supersonic inlet control is often included as an airframe responsibility, it is nevertheless a major factor is providing efficient propulsion in supersonic flight and is therefore addressed in this book.
Installation-related systems issues, focusing primarily on inlet and exhaust systems, are presented in Chapter 6.
As with any high-power rotating machine, bearing lubrication and cooling is a critical function and the task is further complicated by the operational environment provided by an aircraft in flight. Chapter 7 addresses the primary issues associated with lubrication systems of aircraft propulsion gas turbines engines.
In addition to providing propulsion power in aircraft applications, the gas turbine engine must also provide a source of power for all of the energy-consuming systems on the aircraft. This power is removed from the engine in two forms, as described below.
Mechanical power is taken from the shaft connecting the turbine and compressor. This power source, which involves a tower shaft and reduction gearbox, shares the engine lubrication system. A number of drive pads are typically provided for electrical generators and hydraulic pumps. Engine starting is effected through this same gearbox
Bleed air is also used by the airframe for cockpit/cabin pressurization and air conditioning. This source of hot high-pressure air is also used for anti-icing of both the wing and engine nacelle air inlet.
The systems, subsystems and major components associated with mechanical and bleed air power extraction and starting systems are covered in Chapter 8.
So far we have considered gas turbines in aircraft applications only. In the defense industry, however, the benefits of the gas turbine in terms of power per unit weight have not gone unnoticed. Many of today's high-speed naval surface vessels use the gas turbine as the main propulsion device. For completeness, marine gas turbine propulsion systems focusing on naval applications are therefore included in Chapter 9.
The issue of prognostics and health monitoring (PHM) has become a critical issue associated with in-service logistics over the past several years; both the commercial airlines and military maintenance organizations are moving away from scheduled maintenance to on-condition maintenance as a major opportunity to improve efficiency and reduce the cost of ownership.
Chapter 10 describes PHM, covering the basic concepts of engine maintenance and overhaul strategies and the economic benefits resulting from their application. Also addressed are the techniques used in the measurement, management and optimization of repair and overhaul (R&O) practices for application at the fleet level.
Finally, some of the new system technologies that are being considered for future gas turbine propulsion systems are discussed in Chapter 11. Of particular interest by many engine technology specialists is the ‘more-electric engine’ (MEE) initiative which is an offshoot from what began as the ‘all-electric aircraft’ (now the ‘more-electric aircraft’) launched by the Wright Patterson Air Force Laboratory some 40 years ago.
References
1. Saravanamuttoo, H.I.H., Rogers, G.F.C, and Cohen, H. (1951–2001) Gas Turbine Theory, 5th edn, Pearson Education Ltd.
2. Langton, R., Clark, C., Hewitt, M., and Richards, L. (2009) Aircraft Fuel Systems, John Wiley & Sons, Ltd, UK.
Chapter 2
Basic Gas Turbine Operation
The focus of this book is the many systems that are needed in order to produce a successful propulsion engine. However, no treatment of a system design can proceed without an examination of the fundamentals of engine behavior which informs the designer of the basic requirements of the machine for which the system is intended.
This chapter is therefore devoted to an examination of the operating characteristics of the gas turbine. The focus will be on the practical features of the major components and the impact that these features have on the operation of the engine as a system. By inference, they offer some insight into why so many configurations of the gas turbine have been developed.
In purely thermodynamic terms, every gas turbine is a practical implementation of the classic Brayton cycle. This cycle is commonly presented on a temperature–entropy (T–S) diagram as shown in Figure 2.1.
Figure 2.1 The ideal Brayton cycle.
2.1The cycle begins at condition 1, at which point the gas goes through a pure compression phase to a higher temperature and pressure at state 2. The work done by the compressor is represented by the change of thermodynamic state defined by higher pressure and temperature.
Heat is then added to the gas at constant pressure raising its temperature to that of state 3. From state 3 to state 4, the gas is expanded back to a pressure defined by state 1. If the expansion is done through a turbine, sufficient power can be extracted to drive the compressor with enough left over to drive another device such as a propeller. Alternatively, the energy left over from driving the compressor can be expanded through a propelling nozzle to produce thrust.
2.1 Turbojet Engine Performance
The single-spool turbojet is generally regarded as the simplest form of gas turbine. The possibilities for the inclusion of variable geometry will be neglected for the moment and the engine will be considered to have a single moving part: a rotor comprising a compressor and turbine. Its operation is described as follows.
Air enters the engine at the face of the compressor at conditions of pressure and temperature defined by P2 and T2 (atmospheric state) and is compressed to a new thermodynamic state defined by pressures and temperatures P3 and T3.
Fuel is mixed with the compressor air and burned, thereby raising the temperature of the mixture to the highest temperature T4 permitted by available materials.
The hot gas is then expanded through the turbine, producing sufficient power to drive the compressor.
The gas exiting the turbine (still very energetic) is further expanded through the propelling nozzle which produces the thrust needed to drive the airplane.
A diagram of this operation is provided in Figure 2.2. This figure indicates the stations along the gas path of the engine, at which points thermodynamic states are defined. The stage numbering scheme shown is common to many gas turbine engines; however, it is simply a convention and can change with different engine design concepts.
Figure 2.2 Typical turbojet application.
2.2The previous description can be found in just about any treatment of the gas turbine engine. Publications [1] and [2] are examples produced by engine manufacturers Pratt & Whitney and Rolls-Royce, respectively. A third book by Irwin E. Treager [3] is also recommended as an abundant source of gas turbine engine information.
It must be recognized, however, that our interests here are focused on the systems aspect of the engine. We therefore want to explore the interaction of these components with each other and the engine with its environment. Let us therefore begin with an analysis of the performance of a turbojet engine both at design and then off-design conditions.
We begin this topic by first recognizing that compressors and turbines are aerodynamic components which are individually the subject of a design effort. Following the selection of the overall engine design parameters of pressure ratio and turbine inlet temperature, the design point of each of the major components is specified by cycle calculations. Leaving aside issues of allowable physical envelope for the moment, a compressor will be defined by the following aerodynamic parameters:
air flow rate;
pressure ratio; and
isentropic efficiency.
A similar set of parameters will define the design point of the turbine.
Due to the magnitude and complexity of the design task associated with a multistage axial compressor, the work is typically broken down into specialist activities. For example, a compressor aerodynamics group will undertake to specify the number of compressor stages and the size and profile of blade shapes for each stage. From this analysis, a number of parameters will be selected including rotational speed, annulus size, blade stagger, and so on. These parameters, in turn, drive the mechanical design which will produce a physical embodiment which must be lightweight and reliable. A similar effort by the turbine design group will produce a similar design for the turbine.
The reader is reminded that the jet engine is a prime mover which must start from zero speed, accelerate to idle conditions and operate at any point between idle and full power at any altitude and, in some military applications, in any attitude. Each component design group must therefore explore, using a combination of analysis and test, the off-design behavior of the component in question. For compressors and turbines, the results are in the form of performance ‘maps’ which describe the full envelope of behavior for that component. Typical compressor and turbine maps are shown in Figure 2.3.
Figure 2.3 Typical compressor and turbine flow performance maps.
2.3It should be noted that these maps are presented in non-dimensional form. The non-dimensional parameters are derived from the Buckingham Pi theorem, which recognizes that any complex system involving a number of variables can be represented by a set of non-dimensional parameters that is always less than the number of variables by the number of dimensions used. Thus, the variations in compressor and turbine performance which are associated with changes in altitude are conveniently represented by normalizing the maps to sea-level conditions in non-dimensional form.
The full non-dimensional form involves a characteristic dimension such as the inlet diameter; however, this is constant for a given machine so it is commonly dropped from the term. The performance parameters are therefore as follows:
images/c02_I0001.gifwhere images/c02_I0002.gif is the ideal temperature at P3, w is the engine airflow rate, D is a diameter, (usually taken as the diameter of the front of the compressor), and N is the rotational speed of the engine rotor.
In this form, the effect of air density with altitude is accommodated as is the effect of forward speed by referencing inlet conditions (pressure, temperature) to the face of the engine.
The assembly of these major components into a jet engine as shown previously in Figure 2.2 imposes two specific constraints on the operation of the compressor and turbine.
1. All of the air from the compressor must pass through the combustor and turbine. For steady-state conditions, this is commonly referred to as ‘compatibility of flow’.
2. The power generated by the turbine is absorbed by the compressor. In steady state, this is referred to as ‘compatibility of work’.
For a given propelling nozzle area, the above constraints force the turbine and compressor to match each other such that there is a single overall pressure ratio and turbine inlet temperature at which the engine will operate in steady state for a given rotor speed. The idea of a unique operating point can therefore be employed to describe the operation of the engine. A locus of such points can be drawn on the compressor map as shown in Figure 2.4, and is commonly referred to as the ‘engine operating line’ or ‘steady running line’. The unique operating line concept breaks down if a variable area nozzle is employed, of course. This will be discussed more fully in Section 2.1.3.
Figure 2.4 Steady-state operation of the compressor of a turbojet engine.
2.4Since fuel control is one of the systems to be covered in this book, this is an appropriate point to address the dynamic behavior of the engine. Let us therefore consider the consequences of a change in the fuel flow on engine operation. At the outset, it would be fair to say that a positive change in fuel flow rate will tend to increase the power level. It will also increase the rotational speed of the engine which, in turn, means the air flow rate will change. It therefore follows that the steady-state conditions of compatibility flow and work will be upset. In other words, the engine will be operating in a dynamic state.
Let us consider the operation of the combustion chamber, which is shown diagrammatically in Figure 2.5.
Figure 2.5 Combustion chamber operation.
2.5In this figure, the combustor should be thought of as an accumulator whose pressure level is dictated by the law of conservation of mass. The rate of change of density within the combustion is therefore given by:
2.1 2.1
where V is the volume of the combustor can and wFe is the fuel flow rate.
Now, the gas law can be written in differential form as follows:
2.2 2.2
For the present analysis, we will neglect the second term on the right because its effect is very much weaker than the first term and good results can be obtained with this simplification. We can therefore write the conservation of mass equation as follows:
2.3 2.3
A casual examination of this equation would suggest a 25% increase in fuel flow would influence the rate of change of pressure by less than 1% since fuel/air ratio is of the order 0.03. The real influence, however, is obtained from the fact that, as the fuel is consumed, there is an attendant increase in the temperature rise across the combustor associated with the increased fuel burned. The balance of energy in the combustor can be expressed as follows:
2.4 2.4
Again, in simplifying this equation by setting w4 = w3 we obtain:
2.5 2.5
or, in terms of temperature, we can write:
2.6 2.6
where cp is the specific heat of air. For most practical purposes, the chemical process of heat release is very nearly instantaneous. This rapid change in temperature T4 thus affects the turbine flow w4 because the parameter images/c02_I0009.gif controls the flow through the turbine nozzle area.
Referring to Equation 2.3, which describes the rate of change of combustor pressure, it would appear that the dominant influence on P3 is the reduction in combustor exit flow rate. In fact, applying representative values for the compressor inlet temperature and the physical volume of the combustor, we can estimate that the rate of change in pressure is of the order 1000 psi/s. This translates to a first-order time constant for Equation 2.3 of the order a few milliseconds.
Simultaneously with the upset in the compatibility of flow, the power on the shaft is unbalanced in favor of the turbine. The rate of change of rotor speed can therefore be estimated as follows:
2.7 2.7
where Ig is the polar moment of inertia of the rotor, Gt is turbine torque and Gc is compressor torque.
Applying typical values for these parameters suggests that the rate of change of rotor speed to torque imbalance is very much slower than the rate of change of combustor pressure. Again, expressing the response rate in terms of the first-order time constant of Equation 2.7, we obtain values of the order 0.5–1 s for sea-level operating conditions.
If we were to plot the operating point of the compressor through this transient state, we could show that the pressure ratio will rise very rapidly compared to the rate of change of rotor speed. In effect, the compressor operating point will migrate from the steady-state operating line along a steady-state speed line in the direction of surge as shown in Figure 2.6.
Figure 2.6 Compressor operating point transient following a step increase in fuel flow.
2.6Figure 2.7 Photograph of compressor damage following a surge (courtesy of Ian Nunn).
2.7The fact that the response rate of compressor delivery pressure to a step increase in fuel flow rate is about a thousand times faster than the response rate of engine rotor speed suggests that the operating point of the compressor will simply migrate into the surge region of the performance map as shown in Figure 2.6, unless the fuel increase is limited in some way.
The phenomenon of compressor surge or stall is associated with a very rapid collapse of flow rate through the machine. This results in violent changes in forces on individual blades typically at quite