Dust Explosion and Fire Prevention Handbook: A Guide to Good Industry Practices
()
About this ebook
This handy volume is a ready “go to” reference for the chemical engineer, plant manager, process engineer, or chemist working in industrial settings where dust explosions could be a concern, such as the process industries, coal industry, metal industry, and others. Though dust explosions have been around since the Earth first formed, and they have been studied and written about since the 1500s, they are still an ongoing concern and occur almost daily somewhere in the world, from bakeries to fertilizer plants.
Dust explosions can have devastating consequences, and, recently, there have been new industrial standards and guidelines that reflect safer, more reasonable methods for dealing with materials to prevent dust explosions and resultant fires. This book not only presents these new developments for engineers and managers, but it offers a thorough and deep coverage of the subject, starting with a complete overview of dust, how it forms, when it is in danger of exploding, and how this risk can be mitigated. There is also a general coverage of explosions and the environments that foster them.
Further chapters cover individual industries, such as metal and coal, and there is an appendix that outlines best practices for preventing dust explosions and fire and how these risks can be systematically mitigated by these implementations. There is also a handy glossary of terms for easy access, not only for the veteran engineer or chemist, but for the student or new hire.
This ready reference is one of the most useful texts that an engineer or chemist could have at their side. With so many accidents still occurring in industry today and so many hazards, this volume pinpoints the most common and easiest ways for the engineer to go about his daily business safely, efficiently, and profitably, with no extraneous tables or theoretical treatises. A must have for any engineer, scientist, or chemist working with materials that could result in dust explosions or fire.
Nicholas P Cheremisinoff
Nicholas P. Cheremisinoff, Ph.D. (Ch.E.) is Director of Clean Technologies and Pollution Prevention Projects at PERI (Princeton Energy Resources International, LLC, Rockville, MD). He has led hundreds of pollution prevention audits and demonstrations; training programs on modern process design practices and plant safety; environmental management and product quality programs; and site assessments and remediation plans for both public and private sector clients throughout the world. He frequently serves as expert witness on personal injury and third-party property damage litigations arising from environmental catastrophes. Dr. Cheremisinoff has contributed extensively to the literature of environmental and chemical engineering as author, co-author, or editor of 150 technical reference books, including Butterworth-Heinemann’s Handbook of Chemical Processing Equipment, and Green Profits. He holds advanced degrees in chemical engineering from Clarkson College of Technology."
Read more from Nicholas P Cheremisinoff
Industrial Gas Flaring Practices Rating: 0 out of 5 stars0 ratingsPollution Control Handbook for Oil and Gas Engineering Rating: 0 out of 5 stars0 ratingsGroundwater Remediation: A Practical Guide for Environmental Engineers and Scientists Rating: 0 out of 5 stars0 ratingsHydraulic Fracturing Operations: Handbook of Environmental Management Practices Rating: 0 out of 5 stars0 ratingsPerfluorinated Chemicals (PFCs): Contaminants of Concern Rating: 0 out of 5 stars0 ratings
Related to Dust Explosion and Fire Prevention Handbook
Related ebooks
Guidelines for Defining Process Safety Competency Requirements Rating: 3 out of 5 stars3/5Guidelines for Combustible Dust Hazard Analysis Rating: 0 out of 5 stars0 ratingsGuidelines for Vapor Cloud Explosion, Pressure Vessel Burst, BLEVE, and Flash Fire Hazards Rating: 0 out of 5 stars0 ratingsGuidelines for Determining the Probability of Ignition of a Released Flammable Mass Rating: 0 out of 5 stars0 ratingsGuidelines for Siting and Layout of Facilities Rating: 0 out of 5 stars0 ratingsFuel and Combustion Systems Safety: What you don't know can kill you! Rating: 0 out of 5 stars0 ratingsEssential Practices for Creating, Strengthening, and Sustaining Process Safety Culture Rating: 0 out of 5 stars0 ratingsIntroduction to Petroleum Process Safety Rating: 3 out of 5 stars3/5Guidelines for Evaluating Process Plant Buildings for External Explosions, Fires, and Toxic Releases Rating: 0 out of 5 stars0 ratingsA Top Guide for Fire and Life Safety Directors Rating: 0 out of 5 stars0 ratingsGuidelines for Enabling Conditions and Conditional Modifiers in Layer of Protection Analysis Rating: 5 out of 5 stars5/5Guidelines for Initiating Events and Independent Protection Layers in Layer of Protection Analysis Rating: 5 out of 5 stars5/5Bow Ties in Risk Management: A Concept Book for Process Safety Rating: 0 out of 5 stars0 ratingsGuidelines for Engineering Design for Process Safety Rating: 5 out of 5 stars5/5Recognizing Catastrophic Incident Warning Signs in the Process Industries Rating: 0 out of 5 stars0 ratingsFire protection engineering A Complete Guide Rating: 0 out of 5 stars0 ratingsGuidelines for Chemical Process Quantitative Risk Analysis Rating: 5 out of 5 stars5/5Evaluation of Fire Safety Rating: 4 out of 5 stars4/5Guidelines for Fire Protection in Chemical, Petrochemical, and Hydrocarbon Processing Facilities Rating: 0 out of 5 stars0 ratingsFundamentals of Fire Protection for the Safety Professional Rating: 0 out of 5 stars0 ratingsGuidelines for Implementing Process Safety Management Rating: 0 out of 5 stars0 ratingsUnderstanding Lightning and Lightning Protection: A Multimedia Teaching Guide Rating: 0 out of 5 stars0 ratingsGuidelines for Investigating Chemical Process Incidents Rating: 0 out of 5 stars0 ratingsAn Introduction to Fire Dynamics Rating: 0 out of 5 stars0 ratingsFire Dynamics for Firefighters Rating: 0 out of 5 stars0 ratingsGuidelines for Integrating Process Safety into Engineering Projects Rating: 0 out of 5 stars0 ratingsIncidents That Define Process Safety Rating: 0 out of 5 stars0 ratingsGuidelines for Developing Quantitative Safety Risk Criteria Rating: 0 out of 5 stars0 ratingsA Practical Approach to Hazard Identification for Operations and Maintenance Workers Rating: 0 out of 5 stars0 ratings
Chemistry For You
Chemistry For Dummies Rating: 4 out of 5 stars4/5Organic Chemistry I For Dummies Rating: 5 out of 5 stars5/5The Secrets of Alchemy Rating: 4 out of 5 stars4/5Toxic Legacy: How the Weedkiller Glyphosate Is Destroying Our Health and the Environment Rating: 5 out of 5 stars5/5AP Chemistry Flashcards, Fourth Edition: Up-to-Date Review and Practice Rating: 0 out of 5 stars0 ratingsStuff Matters: Exploring the Marvelous Materials That Shape Our Man-Made World Rating: 4 out of 5 stars4/5Painless Chemistry Rating: 0 out of 5 stars0 ratingsA to Z Magic Mushrooms Making Your Own for Total Beginners Rating: 0 out of 5 stars0 ratingsChemistry: a QuickStudy Laminated Reference Guide Rating: 5 out of 5 stars5/5An Introduction to the Periodic Table of Elements : Chemistry Textbook Grade 8 | Children's Chemistry Books Rating: 5 out of 5 stars5/5Essential Oils & Aromatherapy Reloaded: The Complete Step by Step Guide Rating: 3 out of 5 stars3/5The Chemistry Book: From Gunpowder to Graphene, 250 Milestones in the History of Chemistry Rating: 5 out of 5 stars5/5General Chemistry Rating: 4 out of 5 stars4/5Dr. Joe & What You Didn't Know: 177 Fascinating Questions & Answers about the Chemistry of Everyday Life Rating: 0 out of 5 stars0 ratingsPIHKAL: A Chemical Love Story Rating: 4 out of 5 stars4/5Chemistry for Breakfast: The Amazing Science of Everyday Life Rating: 4 out of 5 stars4/5Chemistry Rating: 5 out of 5 stars5/5Elementary: The Periodic Table Explained Rating: 3 out of 5 stars3/5Chemistry: Concepts and Problems, A Self-Teaching Guide Rating: 5 out of 5 stars5/5Organic Chemistry I Essentials Rating: 4 out of 5 stars4/5Chemistry Super Review - 2nd Ed. Rating: 4 out of 5 stars4/5TIHKAL: The Continuation Rating: 4 out of 5 stars4/5MCAT Test Prep Inorganic Chemistry Review--Exambusters Flash Cards--Workbook 2 of 3: MCAT Exam Study Guide Rating: 0 out of 5 stars0 ratingsOil: A Beginner's Guide Rating: 4 out of 5 stars4/5Basics of Chemistry Rating: 0 out of 5 stars0 ratingsBiochemistry For Dummies Rating: 5 out of 5 stars5/5Proof: The Science of Booze Rating: 4 out of 5 stars4/5
Reviews for Dust Explosion and Fire Prevention Handbook
0 ratings0 reviews
Book preview
Dust Explosion and Fire Prevention Handbook - Nicholas P Cheremisinoff
Preface
Airborne dust created by the handling of many industrial materials can combine in an air/dust mixture that could result in a violent, damaging explosion. A combustible dust is defined by the NFPA (Standards 68 and 654) as any finely divided solid material 420 microns or smaller in diameter which presents a hazard when dispersed or ignited in air.
ISO is even more conservative and reports any finely divided solid material smaller in diameter 500 microns may present an explosion hazard. Most organic (carbon containing) and metallic dust will exhibit some combustibility characteristics. Therefore, if dust is present in any form within a working environment efforts should be taken to assess whether the potential for a hazard exists or not, and to devise appropriate practices and safeguards to mitigate the risks.
Preventing dust explosions has gained increased attention in recent years. In the United States the Chemical Safety Board has proposed new regulations to reduce the dangers of combustible dust. The European Community has already implemented two directives for that same purpose. Directive 94/9/EC, often referred to as ATEX-95 (Atmosphères Explosives), defines the safety requirements concerning equipment and protective systems intended for use in potentially explosive atmospheres. The other EC directive, 1999/92/EC (ATEX 137), outlines the minimum requirements for the protection and safety of workers at risk from explosive atmospheres.
Dust explosions can result when a flame propagates through combustible particles that have dispersed in the air and formed a flammable dust cloud. Whether an explosion happens or not depends on the supply of oxygen to the fire and the concentration of the fuel. If the concentration of the oxygen or the fuel is too high or low, then an explosion is very unlikely.
Consider the combustion engine in your car – there are three combustion components (fuel, air/oxygen and the ignition spark) which work together in a controlled manner to produce an explosion inside the enclosed cylinder. For the explosion to take place, the ratio of fuel to air must be in the proper proportion. If the fuel tank is empty, the air source is blocked or if the ignition does not work, then any one of these components is considered controlled, combustion cannot occur and the motor will not start.
Industrial dust explosions can be instigated by many sources, including static sparks, friction and glowing or smoldering materials. But before dust can explode, the following factors need to be present:
The dust must be combustible.
The dust must be capable of becoming airborne.
The dust must have a size distribution capable of flame propagation.
The dust concentration must be within the explosion limits.
An ignition source must be present.
The atmosphere must contain sufficient oxygen to support and sustain combustion.
When all of these factors are present, a dust explosion can occur. Eliminating just one of these requirements would make a dust explosion very unlikely. This then is the overall objective of the volume – to examine the causes of dust explosions and to provide readers with an overall understanding of good industry practices to prevent such events from occurring.
Explosions are defined as sudden reactions involving a rapid physical or chemical oxidation reaction, or decay generating an increase in temperature or pressure, or both simultaneously. When the flame speed exceeds the speed of sound, the event is referred to as a detonation. Otherwise, the explosion is known as a deflagration. Detonations are much more destructive than deflagrations. Typically, dust explosions are relatively slow combustion processes. If ignition occurs in a dust cloud in an open area, then little or no overpressure results and the primary hazard is a fireball. But if a deflagration occurs in a confined space such as a piece of equipment or constricted ductwork or tubes, the results may be devastating, causing substantial damage to operations, injury to operating personnel and even fatalities. The reader will find a number of case studies documented in this volume which testify to the devastating results of industrial dust explosions.
The volume begins with a glossary of terms that are commonly applied to the safe handling of dusts as they relate to fire and explosion issues. The reader may wish to spend a few moments familiarizing him or herself with some of the terms if this subject is relatively new to them.
Chapter 1 examines the physical and thermodynamic properties of particles which comprise dust. Properties such as size, shape, particle size distribution and the combustible nature of some materials are examined, thereby orienting the reader to more in-depth discussions to follow in later chapters.
Chapter 2 provides a general overview of the characteristics and parameters that can be the cause of dust explosions. The basic ingredients that are required for a dust explosion to occur are discussed and important terms and concepts relevant to dust instability are examined.
Chapter 3 provides discussions on the various factors that influence dust explosibility, including but not limited to particle size and particle size distribution, dust concentration, oxidant concentration, ignition temperature, turbulence of the dust cloud, maximum rate of pressure rise, admixed inert dust concentration and the presence of flammable gases.
Chapter 4 delves into the topics of explosions in grain dust elevators, the causes, and good industry practices for prevention. The first recorded incident of a dust explosion was in 1785, in a flour mill in Turin, Italy. A series of accidents during World War I led to a flurry of scientific activity culminating in the publication of numerous pamphlets and bulletins by the U.S. Department of Agriculture. This work identified grain dust as the specific ingredient common to all accidents, and recommended best practices were made in order to prevent the occurrence of these accidents. Despite early industry recognition and statements of good practices, there have continued to be numerous incidents over the decades leading to enormous human and financial losses.
Chapter 5 is titled Coal Dust Explosibility and Coal Mining Operations. This chapter provides an examination of coal dust explosions, safe handling operations, and coal mine safety practices. There are three necessary elements which must occur simultaneously to cause a fire: fuel, heat, and oxygen (known as the fire triangle). Removing any one of these elements eliminates the possibility of fire. But for an explosion to occur, there are five essential elements: fuel, heat, oxygen, suspension, and confinement. These form the five legs of the so-called explosion pentagon. Like the fire triangle, removing any one of these requirements would prevent an explosion from propagating. When a burning fuel is placed in suspension by a sudden blast of air, all five sides of the explosion pentagon are satisfied and an explosion would be imminent. The reader will find pertinent information in this chapter for both good practices for dust management in mining operations and for general processing operations.
Chapter 6 provides information on combustible metals, their properties and some common sense guidelines for safe handling of metal dusts. Most metals are combustible to a varying degree, depending on their physical conditions. Many will undergo dangerous reactions with water, acids, and certain other chemicals; and some metals are subject to spontaneous heating and ignition. The hazard of an individual metal or alloy varies depending on the particle size and shape that is present. The reader will find a wide variety of data and useful information on the safe handling of these materials, plus general guidelines for management of dusts for fire and explosion prevention that are relevant to all materials.
Chapter 7 covers phlegmatization, the use of diluents and the application of inert gases. Each of these practices can reduce the risks of explosible dusts.
Chapter 8 addresses Leak Detection and Repair (LDAR) programs. Because of the possibility of flammable vapors being present in many operations, LDAR should be considered a critical part of the dust management program.
Appendix A is an assembly of general guidelines on safe work practices. Dust explosion and fire safety management programs should be carefully integrated with the overall safe work practices and procedures of the facility. This appendix provides useful general information and good industry practices for safe work ethics and handling of dangerous chemicals.
The author wishes to thank the staff of No Pollution Enterprises for assisting in research, styling and proofreading the manuscript. A heartfelt thank you is also extended to the publisher for their fine production efforts.
Nicholas P. Cheremisinoff, Ph.D.
Chapter 1
Combustible Dusts
1.1 Introduction
According to the National Safety Council¹, dust is defined as solid particles generated by handling, crushing, grinding, rapid impact, detonation, and decrepitation of organic or inorganic materials, such as rock, ore, metal, coal, wood, and grain.
Dust is a by-product of different processes that include dry and powdery material conveying, solids crushing and screening, sanding, trimming of excess material, tank and bin feeding and storing of granular materials, and a number of other processes. The creation of dust during material handling and processing operations may pose the obvious problem of inhalation risks to workers, often characterized as chronic or long term worker exposures. However, when combustible dust is produced and allowed to accumulate, risks can create immediate danger to life and health from explosions. Combustible dust explosions have resulted in the loss of life, multiple injuries and substantial property and business damage. A few examples² are:
In 2002, an explosion at Rouse Polymerics International, a rubber fabricating plant in Vicksburg, Miss., resulted in injuring eleven employees, five of whom later died of severe burns. The explosion occurred with the ignition of an accumulation of a highly combustible rubber.
In 2003 an explosion and fire occurred at the West Pharmaceutical Services plant in Kinston, N.C., resulting in the death of six workers, injuries to dozens of employees, and hundreds of job losses due to the destruction of the plant. The facility produced rubber stoppers and other products for medical use. The fuel for the explosion was a fine plastic powder that had accumulated unnoticed above a suspended ceiling over the manufacturing area.
In 2003 an explosion and fire damaged the CTA Acoustics manufacturing plant in Corbin, Ky., fatally injuring seven employees. The facility produced fiberglass insulation for the automotive industry. The combustible dust associated with the explosion was a phenolic resin binder used in producing fiberglass mats.
In 2003, a series of explosions severely burned three employees, one fatally, and caused property damage to the Hayes Lemmerz manufacturing plant in Huntington, Ind. The Hayes Lemmerz plant manufactured cast aluminum automotive wheels. The explosions were fueled by aluminum dust, a combustible by-product of the manufacturing process.
In 2008 combustible sugar dust was the fuel for a massive explosion and fire at the Imperial Sugar Co. plant in Port Wentworth, Ga., resulting in 13 deaths and the hospitalization of 40 more workers, some of whom received severe burns.
These are only a few examples of dust explosions in which there was loss of life and the substantial destruction of assets and properties.
Before we can understand the causes of dust explosions and ways to prevent them, we need to understand what dust is. The physical, chemical and thermodynamic properties of dust are important for a myriad of reasons ranging from the protection of workers from inhalation hazards, explosions and fire, and the overall safe and economic handling of materials that are prone to creating dust.
In this chapter we focus on the physical and thermodynamic properties of particles which comprise dust. Properties such as size, shape, particle size distribution and the combustible nature of some materials are discussed, orienting the reader to more in-depth discussions to follow in later chapters.
1.2 Metrics
Dusts are generated from solid or granular materials and can exist over a wide range of particle sizes depending on the material handling and processing operation. They may also form through the processes of sublimation and thermal oxidation as well as from combustion-related processes. Particles that are too large to remain airborne settle out due to gravity, while the smallest particles can remain suspended in air almost indefinitely as colloidal suspensions.
The unit of measure used to characterize dust particle size is the ‘micrometer’, more commonly known as a micron or μm. The micrometer is a unit of length equal to 10−4 (0.0001) centimeter or approximately 1/25,000 of an inch, or another way of stating this – there are 25,400 microns in one inch. In metric units a micron represents one-millionth of a meter. By way of physical comparisons:
Red blood cells are typically 8 μm (0.0008 cm) in size
Human hair is 50 – 600 μm in diameter
Cotton fiber, 15–30 μm
The human eye can see particles to as low as 40 microns. Table 1.1 provides some typical dimensions for materials the reader may relate to.
However, the term particle size requires some thought. What do we really mean by particle size? Certainly when a particle is spherical, size equates with the diameter of a sphere. But particles not only come in different sizes, they exist in different shapes.
Table 1.1 Typical particle size comparisons.
1.3 Size and Shape
One of the most important physical properties of particulates is size. Particle size measurement is routinely carried out across a wide range of industries and is often a critical parameter in the manufacture of many different products. Size has a direct influence on material properties including reactivity or dissolution rate e.g. catalysts, tablets; in the stability in suspension e.g. sediments and paints; for efficacy of delivery e.g. asthma inhalers; in the texture and feel e.g. food ingredients; in product appearance e.g. powder coatings and inks; in terms of flowability and handling e.g. granules; in viscosity e.g. nasal sprays; in the packing density and porosity of a product, e.g. ceramics.
Understanding how particle size affects products and processes is critical to many manufacturing operations. It is also important to the safe handling of materials especially in terms of inhalation risks to workers that come into contact with dusty materials, and as discussed later on, in terms of explosions and fires.
We begin by recognizing that particles are 3-dimensional objects and unless they are perfect spheres (e.g. emulsions or bubbles), they cannot be fully described by a single dimension such as a radius or diameter. To simplify both the measurement and characterization of particles, it is convenient to define particle size using the concept of equivalent spheres. In this way particle size is defined by the diameter of an equivalent sphere having the same property as the actual particle like volume or mass for example. Different measurement techniques and reference definitions use different equivalent sphere models and therefore will not necessarily give exactly the same result for the particle diameter. Examples include:
Sphere with the same maximum or minimum length of a particle
Sphere with the same weight of a particle
Sphere with the same volume as a particle
Sphere with the same surface area of a particle
Sphere capable of passing through the same sieve aperture as a particle
Sphere having the same settling or sedimentation rate as a particle
See figure 1.1 for reference. It is important that any size relied on should be carefully referenced to a specific measurement technique and/or reference definition.
Figure 1.1 Examples of particle size definitions.
The concept of equivalent spheres is useful in terms of a convenient metric for the characterization of particles, however, surface area is more relevant to the subject of this book. Particle-gas interfacial area is a critical property of a two-phase gas-solid system that has direct relevance to the property of ignition as we will see from later discussions. For now, however, we shall continue to dwell on the definitions of particle size.
While the concept of equivalent sphere is reasonable for regular shaped particles, it may not always be appropriate for irregular shaped particles, such as needles or plate-like particulates, where the size in at least one dimension can differ significantly from that of the other dimensions. See figure 1.2 as an example.
Figure 1.2 Example of volume equivalent rod and sphere of a needle-shaped particle
(Source: after A Basic Guide to Particle Characterization, Malvern Instruments Worldwide, 2012 Malvern Instruments Ltd., wwwmalvern.com).
Figure 1.2 illustrates a rod shaped particle for which a volume equivalent sphere would give a particle diameter of 198μm. This is not an accurate description of the particle’s true dimensions. One option then is to define the particle as a cylinder with the same volume which has a length of 360 μm and a width of 120μm. This definition more accurately describes the size of the particle and may provide a better understanding of the behavior of this particle during processing or handling.
1.4 Size Distribution
Let us consider what we really mean by the term particle size. The term alone refers to a single metric or measurement. But is this truly an accurate way to describe dust?
To answer this we really must consider dust to be comprised of a particle system which is made up of many particles. Consider a special case where all of the particles making up the particle system have the same or almost same particle size. In this example the particle system is defined as being Monodisperse. However, in a case where the particle system is made up of particles different in size, the system is defined as Polydisperse. It is the size of the particle system or particle diameter distribution which reflects the regularity or irregularity of the sizes of all the particles.
The term particle size distribution actually refers to an index, which is a means of expression indicating the sizes of particles that are present in specified proportions – i.e., the relative particle amount is expressed as a percentage where the total amount of particles is 100 % in the sample particle group measured. Volume, area, length, and quantity are used as standards (i.e., metrics) to define particle amount.
The term frequency distribution is applied to define in percentage the amounts of particles existing in respective particle size intervals after the range of target particle sizes is divided into separate intervals or bins. One may further characterize particle sizes by cumulative distribution (for particles passing a sieve size) whereby we can express the percentage of the amounts of particles of a specific particle size or below a size. Alternatively, cumulative distribution (for particles remaining on the sieve) expresses the percentage of the amounts of particles of a specific particle size or above.
The concept of particle size distribution depends very much on the particle size definition used. The shape of almost all particles cannot be simply and quantitatively expressed as spheres. Rather, particles are complex systems comprised of irregular shapes, and in some instances are not individual particle entities but made up of aggregates. This is why the indirect definition of a sphere-equivalent diameter is most useful. Under this definition, when a certain particle is measured based on a certain principle of measurement, the particle size of the measured particle is expressed by the diameter of a spherical body that displays the same result (i.e. measurement quantity or pattern). Referring back to figure 1.1 as an example, consider an equivalent sphere definition based on particle settling rate. In this example the particle size is based on a measurement method known as the precipitation method. Here the particle size of the particle (i.e., its diameter) is calculated assuming a sphere having the same settling velocity and density as a sphere is the actual particle. However, if another measurement technique such as the laser diffraction/scattering method is used – i.e., a method in which the particle size of the particle to be measured assumes the same diffracted/scattered light pattern as a 1 μm-diameter sphere is 1 μm regardless of the shape of the particle – then we have a very different size definition and hence a very different size distribution.
If the principle of measurement differs, the definition of particle size, in other words, the scale itself used as the measurement standard differs. In which case, completely different measurement results will be obtained even if the term particle size distribution
is the same. Accordingly, we really have no choice but to consider the principle of measurement itself to be a scale or a standard. For this reason, it is meaningless to scientifically rank precision or accuracy when comparing various principles of measurement.
In selecting the principle of measurement or an analyzer, one must clearly understand and state the objectives. Only by doing so can the properties and specifications of the analyzer (e.g. measuring range, resolution and sample state during measurement) be determined as appropriate for a specific measurement. Noting these considerations let’s turn our attention back to the definitions of distribution.
Unless the particle network is mono disperse, i.e. every single particle has exactly the same dimensions, there must exist a statistical distribution of particles of different sizes. It is common practice to represent this distribution in the form of either a frequency distribution curve, or a cumulative (undersize) distribution curve. There are several terms that are used to define distributions:
Weighted distributions
Number weighted distributions
Volume weighted distributions
Intensity weighted distributions
1.4.1 Weighted Distributions
A particle size distribution can be represented in different ways with respect to the weighting of individual particles. The weighting mechanism will depend upon the measuring principle applied. In all cases, the statistical representation of the size distribution is based on a weighted basis.
1.4.2 Number Weighted Distributions
A counting technique such as image analysis will provide a numerical weighted distribution where each particle is given equal weight irrespective of its size. This is most often useful when knowing the absolute number of particles is important, in foreign particle detection for example, or where high resolution (particle by particle) is required.
1.4.3 Volume Weighted Distributions
Static light scattering techniques such as laser diffraction provide a volume weighted distribution. Here the contribution of each particle in the distribution relates to the volume of that particle (equivalent to mass if the density is uniform), i.e. the relative contribution will be proportional to (size). This is often extremely useful from a commercial perspective as the distribution represents the composition of the sample in terms of its volume/mass, and is sometimes related to dollar value for each size fraction.
1.4.4 Intensity Weighted Distributions
Dynamic light scattering techniques provide an intensity weighted distribution, where the contribution of each particle in the distribution relates to the intensity of light scattered by the particle. For example, using a technique known as the Rayleigh Approximation, the relative contribution for very small particles will be proportional to (size).
When comparing particle size data for the same sample measured by different techniques, it is important to recognize that the types of distribution being measured and reported can produce very different particle size results.
Let us now consider the statistical parameters defining the size distribution.
1.4.5 Size Distribution Statistics
Statistics is defined as the study of how to collect, organize, analyze, and interpret numerical information from data. This is by no means a simple topic and one where there are significant levels of interpretation and disagreement among engineers, scientists and mathematicians.
Descriptive statistics concerns methods of organizing, picturing and summarizing information from data.
Inferential statistics involves methods of using information from a sample to draw conclusions about the data population. We must always be cognizant of the fact that statistical inferences are no more accurate than the data they are based on, i.e., the weakest link in an analysis.
An important key to applying statistical definitions is the understanding of the variables which define a parameter of interest. A variable is the characteristic of the individual to be measured or observed, in this case size. Taking a more general view, if we wanted to do a study about the people who have climbed a particular tall mountain, then the individuals in the study would be the actual people who made it to the top. The variables to measure or record observations about might be the height, weight, race, gender, income, etc. of the individuals that made it to the top of the mountain.
Variables can fall into two general categories, quantitative and qualitative. A quantitative variable has a value or numerical measurement for which operations such as addition or averaging make sense. This is suitable for sizes. In contrast, a qualitative variable describes an individual by placing the individual into a category or group such as male or female, or perhaps irregular and needle-like particles found in a particle population.
We may also describe a population in terms of Nominal Level (in name only). These are qualities of a population with no ranking/ordering and no numerical or quantitative value. Data generally consist of names, labels and categories.
We may also describe qualities of a population in terms of Ordinal Level, i.e., data may be arranged in some order, but the differences between the data values are meaningless. For example, of 20 particle size samples taken for analysis, 15 were rated good quality, 4 were rated better quality, and 1 was rated best quality.
The term Interval Level also has relevance. Data values can be ranked and the differences between data values are meaningful. However, there is no intrinsic zero, or starting point, and the ratio of data values are meaningless. Some simple examples are calendar dates and Celsius & fahrenheit temperature readings have no meaningful zero and ratios are therefore meaningless. And so it goes with particle sizes, e.g., the smallest particle bin size in an analysis was 0 to 2.5μm. The lowest value is not absolute but rather established by the lower limit of resolution of a measurement technique or more often, an arbitrary definition applied by the investigator.
There are also the following Levels of Measurement that we should be cognizant of:
Nominal Level (in name only): Refers to qualities with no ranking/ordering, no numerical or quantitative value.
Ordinal Level: These qualities can be arranged in some numerical order, but the differences between the data values are meaningless.
Interval Level: Data values can be ranked and the differences between data values are meaningful. However, there is no intrinsic zero, or starting point, and the ratio of data values are meaningless.
Ratio Level: A term that is similar to interval, except there is an inherent zero, or starting point, and the ratios of data values have meaning.
To simplify the interpretation of particle size distribution data, a choice of statistical parameters can be calculated and used for reporting and analyses purposes. The choice of the most appropriate statistical parameter for any given sample will depend upon how that data will be applied and what it will be compared against. For example, if we wanted to report the most common particle size in a sample population, we could choose between the following parameters:
A mean, representing the ‘average’ size of the population
The median, representing the size where 50% of the population is below or above the midsize particle size
The mode, representing the size with the highest frequency
If the shape of the particle size distribution is asymmetric, as is often the case, we would not expect these three values to be exactly equivalent.
The most often relied on reference value for a particle size distribution is the Dp50, also known as the median diameter or the medium value of the particle size distribution. It represents the value of the particle diameter at 50% of the cumulative distribution. See as an example, figure 1.3 which reports the particle size distribution for a sample of beach sand. The graph shows the cumulative particle size distribution graph (curve), where the ordinate represents the cumulative particle size distribution from 0% to 100%, and the abscissa represents the particle size.
Figure 1.3 Cumulative particle size distribution for a sample of beach sand.
Located on the graph is the cumulative distribution 50% on the ordinate, along with its corresponding particle size value in ordinate (i.e., the Dp50). In this example, the Dp50 value is about 125 μm. In other words, 50% of the particles in the sample are larger than 125 μm, and 50% smaller than 125 μm. Dp50 is usually used to represent the particle size of group of particles.
One should think of a particle size distribution as the number of particles that fall into each of the various size ranges given as a percentage of the total number of all sizes in the sample of interest.
Dp50 may also be expressed as Dv50 (particle size represented by volume), Dw50 (particle size represented by weigh or mass), and Dn50 (particle size represented by number of particles). The specific definition depends on convention, the investigator or the application to a specific engineering calculation.
1.5 Why Some Dusts are Combustible
The National Fire Protection Association (NFPA) defines a combustible dust as a combustible particulate solid that presents a fire or deflagration hazard when suspended in air or some other oxidizing medium over a range of concentrations, regardless of particle size or shape.
³
As a general rule of thumb, combustible particulates having an effective diameter of 420 μm or smaller, as determined by passing through a U.S. No. 40 Standard Sieve, are generally considered to be combustible dusts. However, agglomerates of combustible materials that have lengths that are large compared to their diameter (and will not usually pass through a 420 μm sieve) can still pose a deflagration hazard. Therefore, any particle that has a surface area to volume ratio greater than that of a 420 μm diameter sphere should also be considered a combustible dust according to the NFPA definition.
The vast majority of natural and synthetic organic materials, as well as some metals, can form combustible dusts. The NFPA’s Industrial Fire Hazards Handbook states, any industrial process that reduces a combustible material and some normally noncombustible materials to a finely divided state presents a potential for a serious fire or explosion.
Examples of natural and synthetic organic materials that can form combustible dusts include:
Food products (e.g., grain, cellulose, powdered milk, sugar, flour, starch, cocoa, maltodextrin)
Pharmaceuticals (e.g., vitamins; cosmetic powders)
Wood (e.g., wood dust, wood flour)
Textiles (e.g., cotton dust, nylon dust)
Plastics (e.g., phenolics, polypropylene)
Resins (e.g., lacquer, phenol-formaldehyde)
Biosolids (dried wastes from sewage treatment plants)
Coal and other carbon dusts
Examples of inorganic materials and metals that can