GPAT and Pharmacy: Competetive Entrance Exams
()
About this ebook
Contents:
1. Pharmaceutics
2. Pharmaceutical Chemistry and Pharmacology
3A. Pharmacognosy and Phytochemistry
3B. Biotechnology and Microbiology
Related to GPAT and Pharmacy
Related ebooks
MCQs in Pharmaceutical Sciences for GPAT and NIPER Rating: 5 out of 5 stars5/5Industrial Pharmacy - I Rating: 5 out of 5 stars5/5GPAT and Gate Pharmacy 3rd Edition: GPAT and Gate Pharmacy 3rd Edition Rating: 4 out of 5 stars4/5Medicinal Chemistry Rating: 1 out of 5 stars1/5Essentials of Pharmaceutical Technology Rating: 0 out of 5 stars0 ratingsPharmaceutics: Basic Principles and Formulations Rating: 0 out of 5 stars0 ratingsBiopharmaceutics and Pharmacokinetics Rating: 4 out of 5 stars4/5FOREIGN PHARMACY GRADUATES EQUIVALENCY EXAMINATION (FPGEE): Passbooks Study Guide Rating: 0 out of 5 stars0 ratingsQuick Review on Industrial Pharmacy-1 Rating: 3 out of 5 stars3/5Pharmaceutical Organic Chemistry Rating: 0 out of 5 stars0 ratingsPhysical Pharmaceutics-II Lab Manual as per the PCI Syllabus Rating: 0 out of 5 stars0 ratingsIndustrial Pharmacy -II Rating: 0 out of 5 stars0 ratingsPharmaceutical Quality Assurance and Management Rating: 0 out of 5 stars0 ratingsMCQs in Medical Pharmacology Rating: 0 out of 5 stars0 ratingsStrategic Pharmaceutical Marketing Rating: 0 out of 5 stars0 ratingsPharmaceutical Engineering Rating: 0 out of 5 stars0 ratingsSenior Pharmacist: Passbooks Study Guide Rating: 0 out of 5 stars0 ratingsPharmaceutics: A Practical Manual for PHARM & PHARM D Courses Rating: 5 out of 5 stars5/5Stability Studies of Pharmaceutical & Cosmetic Products Rating: 0 out of 5 stars0 ratingsFundamentals of Medicinal Chemistry and Drug Metabolism Rating: 0 out of 5 stars0 ratingsFundamentals of Clinical Pharmacy Practice Rating: 5 out of 5 stars5/5Pharmacy Administration Rating: 5 out of 5 stars5/5Hospital and Clinical Pharmacy Rating: 4 out of 5 stars4/5Textbook of Pharmacovigilance: Concept and Practice, Second Edition Rating: 0 out of 5 stars0 ratingsNovel Drug Delivery Systems Rating: 4 out of 5 stars4/5Introduction to Pharmaceutical Analysis Rating: 3 out of 5 stars3/5Instrumental Methods of Drug Analysis Rating: 3 out of 5 stars3/5A Textbook of Pharmacy Practice Rating: 0 out of 5 stars0 ratingsName That Drug Rating: 0 out of 5 stars0 ratingsPharmacy Practice: Essentials of Hospital, Clinical and Community Pharmacy Rating: 5 out of 5 stars5/5
Medical For You
What Happened to You?: Conversations on Trauma, Resilience, and Healing Rating: 4 out of 5 stars4/5Gut: The Inside Story of Our Body's Most Underrated Organ (Revised Edition) Rating: 4 out of 5 stars4/5Brain on Fire: My Month of Madness Rating: 4 out of 5 stars4/5The Little Book of Hygge: Danish Secrets to Happy Living Rating: 4 out of 5 stars4/5Mating in Captivity: Unlocking Erotic Intelligence Rating: 4 out of 5 stars4/5The Vagina Bible: The Vulva and the Vagina: Separating the Myth from the Medicine Rating: 5 out of 5 stars5/5Living Daily With Adult ADD or ADHD: 365 Tips o the Day Rating: 5 out of 5 stars5/5The Emperor of All Maladies: A Biography of Cancer Rating: 5 out of 5 stars5/5Adult ADHD: How to Succeed as a Hunter in a Farmer's World Rating: 4 out of 5 stars4/5The Lost Book of Simple Herbal Remedies: Discover over 100 herbal Medicine for all kinds of Ailment, Inspired By Dr. Barbara O'Neill Rating: 0 out of 5 stars0 ratingsWomen With Attention Deficit Disorder: Embrace Your Differences and Transform Your Life Rating: 5 out of 5 stars5/5"Cause Unknown": The Epidemic of Sudden Deaths in 2021 & 2022 Rating: 5 out of 5 stars5/5Blitzed: Drugs in the Third Reich Rating: 4 out of 5 stars4/5Mediterranean Diet Meal Prep Cookbook: Easy And Healthy Recipes You Can Meal Prep For The Week Rating: 5 out of 5 stars5/5This Is How Your Marriage Ends: A Hopeful Approach to Saving Relationships Rating: 4 out of 5 stars4/5Holistic Herbal: A Safe and Practical Guide to Making and Using Herbal Remedies Rating: 4 out of 5 stars4/5Rewire Your Brain: Think Your Way to a Better Life Rating: 4 out of 5 stars4/552 Prepper Projects: A Project a Week to Help You Prepare for the Unpredictable Rating: 5 out of 5 stars5/5The Song of the Cell: An Exploration of Medicine and the New Human Rating: 4 out of 5 stars4/5The Amazing Liver and Gallbladder Flush Rating: 5 out of 5 stars5/5ATOMIC HABITS:: How to Disagree With Your Brain so You Can Break Bad Habits and End Negative Thinking Rating: 5 out of 5 stars5/5The Obesity Code: the bestselling guide to unlocking the secrets of weight loss Rating: 4 out of 5 stars4/5The 40 Day Dopamine Fast Rating: 4 out of 5 stars4/5Peptide Protocols: Volume One Rating: 4 out of 5 stars4/5Extra Focus: The Quick Start Guide to Adult ADHD Rating: 5 out of 5 stars5/5The Hormone Reset Diet: Heal Your Metabolism to Lose Up to 15 Pounds in 21 Days Rating: 4 out of 5 stars4/5
Reviews for GPAT and Pharmacy
0 ratings0 reviews
Book preview
GPAT and Pharmacy - Neelesh Malviya,
CHAPTER 1
Pharmaceutics
1. How does the addition of magnesia and alumina affect soda lime glass?
A. Enhances mechanical strength
B. Increases softening temperature
C. Reduces porosity
D. Improves chemical durability
2. What are lead glasses used for?
A. Kitchenware
B. Electronic tubes
C. Optical components
D. Temperature thermometers
3. Which type of glass is regarded as the most heat resistant?
A. Fused silica
B. 96% silica
C. Alumino silicate
D. Borosilicate
4. What is 96% silica glass used for?
A. Heat shield
B. Temperature thermometers
C. Combustion tubes
D. Electronic tubes
5. Which of the following packaging material is protect the drug content against light ?
A. Plastic containers
B. Amber coloured glass container
C. Both
D. None of the above
6. Major Disadvantage of glass as a packaging material is:
A. Fragility
B. Weight
C. Both
D. None of the above
7. To produce molten glass, which of the following method is used
A. Blowing
B. Pressing
C. Drawing
D. Casting
8. Which of the following one is a broken glass & acts as fusion agent
A. Cullet
B. Lime stone
C. Soda Ash
D. Sand
9. Type I glass is also known as
A. Borosilicate glass
B. Regular soda lime glass
C. Treated soda lime glass
D. None
10. Which of the following test is performed on crushed grains, to evaluate the chemical resistance of glass?
A. Powder glass test
B. Water attack test
C. Both
D. None
11. The advantages of plastic containers over glass containers are
A. Easy formation
B. Resistance to breakage
C. Freedom of design
D. All of the above
12. To protect the contents of a bottle from the effects of sunlight by UV rays, which glass is used?
A. Amber glass
B. Red glass
C. Both
D. None
13. Soda ash also known as
A. Pure silica
B. Lime stone
C. Sodium carbonate
D. Calcium carbonate
14. Type NP glass is also known as
A. Borosilicate glass
B. General purpose glass
C. Soda lime glass
D. Treated soda lime glass
15. Type III glass is also known as
A. Borosilicate glass
B. General purpose glass
C. Regular soda lime glass
D. Treated soda lime glass
16. Process of use of compressed air to form molten glass in the cavity of a metal mold is called
A. Drawing
B. Casting
C. Blowing
D. Pressing
17. The process in which molten glass is pulled through dies which shape the soft glass is called
A. Drawing
B. Casting
C. Blowing
D. Pressing
18. The process of production of glass containers which makes use of centrifugal force is called
A. Casting
B. Drawing
C. Pressing
D. Blowing
19. The process of production of glass containers which makes use of mechanical force is called
A. Casting
B. Drawing
C. Pressing
D. Blowing
20. The USP specifications for light resistance containers require the glass to provide protection against ........ wavelength of light.
A. 7800-8000 angstroms
B. Below 1000 angstroms
C. 2900-4500 angstroms
D. None of the above
21. Test for evaluating chemical resistance described in NF
A. Powdered glass test
B. Water attack test
C. Both A and B
D. None
22. Water attack test is used only to evaluate
A. Borosilicate glass
B. General purpose glass
C. Regular soda lime glass
D. Treated soda lime glass
23. Powdered glass test is used only to evaluate
A. Borosilicate glass
B. Regular soda lime glass
C. Treated soda lime glass
D. All of above
24. Distilled water stored for one year in regular soda lime glass picks up to sodium hydroxide.
A. 10 to 15 ppm
B. 40 to 50 ppm
C. 100 ppm
D. None
25. Percentage of Boron in Type I borosilicate glass is approximately
A. 6%
B. 10%
C. 17%
D. 25%
26. Distilled water stored for one year in treated soda lime glass picks up to ...... sodium hydroxide.
A. 0.5 ppm
B. 5 ppm
C. 10 to 15ppm
D. None
27. Weathering can be prevented by the use of
A. Commercial soda lime glass
B. De-alkalized soda lime glass
C. Regular soda lime glass
D. None
28. Sulphate bloom appears on treated soda lime glass due to deposition of
A. Alkali
B. Acid
C. Sulphur
D. None
29. The density of polyethylene is in the range
A. 0.91-0.96
B. 0.89-0.90
C. 1.09-1.14
D. None
30. Water absorption property is comparatively higher in case of which plastic
A. Low density polyethylene
B. High density polyethylene
C. Polypropylene
D. Polystyrene
31. Permeability to water vapour is comparatively higher in case of which plastic
A. Low density polyethylene
B. High density polyethylene
C. Polypropylene
D. Polystyrene
32. Oxygen permeability to is comparatively lower in case of which plastic
A. PVC
B. High density polyethylene
C. Polypropylene
D. Polystyrene
33. Which of the following packaging material have very good resistance to acids?
A. Nitrile polymers
B. PVC
C. Polystyrene
D. None of the above
34. Which of the following packaging material have a good heat resistance?
A. Low density polyethylene
B. High density polyethylene
C. Polypropylene
D. Polystyrene
35. Which of the following plastic material cannot be stored at low temperature?
A. PVC
B. Low density polyethylene
C. High density polyethylene
D. Polypropylene
36. Which of the following packaging material has an excellent resistance to impact?
A. Low density polyethylene
B. High density polyethylene
C. Styrene acrylonitrile
D. Polystyrene
37. Which of the following plastic material has the highest unit cost
A. Nitrile polymers
B. Low density polyethylene
C. High density polyethylene
D. Styrene acrylonitrile
38. Density of polyethylene directly determines which property of the polymer
A. Stiffness
B. Stress cracking
C. Clarity
D. All the above
39. Dilauryl thiopropionate is used as
A. Antioxidant
B. Antistatic agent
C. Plasticizer
D. Impact modifiers
40. Polyethylene glycols in concentration range of 0.1% to 0.2% is used as
A. Antistatic agent
B. Antioxidant
C. Impact modifiers
D. Plasticizer
41. One of the drawback of polypropylene is
A. Lack of clarity
B. Lack of acid resistance
C. Low melting point
D. It stress crack easily
42. Dioctyl-tin mercaptoacetate is added toPVC with the purpose to prevent
A. Yellowing when exposed to heat
B. Stress cracking
C. Water vapour permeation
D. None
43. Tin compounds are added to PVC for the purpose of
A. Antistatic agent
B. Plasticizer
C. Impact modifiers
D. Stabilizer
44. Angiosarcoma is observed in some patient exposed to
A. Vinyl chloride monomers
B. PVC
C. Polyethylene
D. None
45. Impact resistance in PVC containers is found to be
A. Increased on storage at low temperature
B. Not effected
C. Decreased on storage at low temperature
D. None of above
46. The properties of polystyrene is
A. High water vapour transmission
B. Low resistance to impact
C. Low melting point
D. All the above
47. To improve impact resistance and brittleness polystyrene is combine with
A. Sulphur
B. Rubber and acrylic compounds
C. Tin
D. None of the above
48. High impact, super impact and intermediate impact are the classification of
A. Glass
B. Polystyrene
C. Rubber
D. None of the above
49. The properties of polyamide is
A. High oxygen impermeability
B. Low resistance to impact
C. High water vapour impermeability
D. All the above
50. Water vapor permeability of polyamide can be reduced by laminating it with
A. Polyethylene
B. Polystyrene
C. Acrylic polymer
D. None
51. Highest impact resistance is observed in which plastic
A. Polycarbonate
B. Polystyrene
C. Polypropylene
D. None
52. Which of the following plastics is set by FDA for food along with pharmaceutical packaging?
A. Acrylic Multipolymers
B. Polyvinyl Chloride
C. Polystyrene
D. None
53. Limit of acrylic monomer in Acrylic polymers is
A. Less than 0.3 ppm
B. Less than 15 ppm
C. Less than 20 ppm
D. Less than 11ppm
54. Allowable limits for migration of a cylic monomer in food products is
A. Less than 10 ppm
B. Less than 20 ppm
C. Less than 0.3 ppm
D. Less than 0.5 ppm
55. Which of the following is an example of condensation polymer
A. Polystyrene
B. Polypropylene
C. Polyethylene terephthalate
D. None of above
56. Coextrusion technology may be used to increase
A. Barrier to moisture
B. Barrier to gas
C. Impact resistance
D. All of above
57. Transmission of gases, vapours or liquids through plastic packaging materials is called
A. Sorption
B. Leaching
C. Chemical reaction
D. Permeation
58. Permeation through plastic containers present problem to dosage forms which are sensitive to
A. Hydrolysis
B. Oxidation
C. Both
D. None
59. Migration of additives from plastic container to the formulation stored in it is termed as
A. Leaching
B. Sorption
C. Permeation
D. Chemical reaction
60. The process of removal of constituents from drug product by the packaging material is called as
A. Sorption
B. Leaching
C. Chemical reaction
D. Permeation
61. Factors influencing sorption from product are
A. Chemical structure
B. Temperature
C. Concentration of active ingredients
D. All the above
62. The physical and chemical alteration of the packaging material by the drug product is called
A. Chemical reactivity
B. Leaching
C. Modification
D. Sorption
63. Softening effect on polyethylene due to oils stored in it is an example of
A. Modification
B. Leaching
C. Chemical reactivity
D. Sorption
64. Main purpose of adding antimony to lead in the preparation of collapsible tubes is to
A. Enhances pliability
B. Increases malleability
C. Reduces porosity
D. Increase hardness
65. Main purpose of adding antimony to lead in the preparation of collapsible tubes is to
A. Enhances pliability
B. Increases malleability
C. Reduces porosity
D. Increase hardness
66. Which metal tube hardens on use and may develop leaks
A. Tin
B. Lead
C. Aluminium
D. None
67. Which is the most expensive metal used in the preparation of collapsible tubes?
A. Tin
B. Lead
C. Aluminium
D. Iron
68. Which material is used for linings in the preparation of metal collapsible tubes?
A. Wax
B. Phenolics
C. Epoxides and vinyls
D. All the above
69. Which of the following packaging material is used in the preparation of collapsible tubes?
A. Low density polyethylene
B. High density polyethylene
C. Polypropylene
D. All the above
70. Sideseamer is a machine which is used in the preparation of
A. Metal collapsible tube
B. Plastic collapsible tube
C. Laminated tube
D. None of the above
71. Press-on, roll-on, friction etc are the designs of:
A. Closures
B. Laminates
C. Metal collapsible tube
D. None of the above
72. The Owens-Illinois torque tester is used in the evaluation of:
A. Glass containers
B. Plastic containers
C. Metal containers
D. Plastic moulded closures
73. Facing material and backing are the part of:
A. Homogenous Liner
B. Rubber closure
C. Heterogenous Liner
D. None of the above
74. Cushioning and sealing properties of cap are provided by
A. Resilient backing
B. Facing material
C. Both the above
D. None of the above
75. The rubber polymers commonly used for rubber stoppers are:
A. Natural rubber
B. Neoprene
C. Butyl rubber
D. All the above
76. Sulphur is added in the manufacturing of rubber closures as
A. Vulcanizing agent
B. Antioxidant
C. Accelerator
D. Pigment
77. Zinc oxide is added in the manufacturing of rubber closures as
A. Vulcanizing agent
B. Antioxidant
C. Accelerator
D. Pigment
78. Phenolics are the example of
A. Thermosetting resins
B. Thermoplastics resins
C. Both the above
D. None of the above
79. Polystyrene is an example of
A. Thermosetting resins
B. Thermoplastics resins
C. Both the above
D. None of the above
80. Which of the following is capable of meeting the requirements of tamper-resistance packaging as defined by FDA regulation 21 C.F.R. Parts 211, 314 and 700
A. Film wrappers
B. Tape seals
C. Blister package
D. All the above
81. End-folded and fin seal are the types of
A. Film wrappers
B. Tape seals
C. Sealed cartons
D. Blister package
82. Heat sealable acrylic coatings are applied to impart heat sealing characteristics to
A. Polypropylene
B. Cellophane
C. Both
D. None
83. Nitrocellulose is applied to cellophane to impart
A. Crystal clarity
B. Machinability
C. Heat sealable characteristic
D. None
84. Comparatively highest seal integrity is observed in
A. End-folded wrapper
B. Fin seal wrapper
C. Shrink wrapper
D. None
85. Which is an example of heat sealable material:
A. Polyethylene
B. Surlyn
C. Nitrocellulose
D. All the above
86. Polyvinylidene chloride laminations are available under the trade name of
A. Saran
B. Aclar
C. Surlyn
D. None of the above
87. Aclar is chemically
A. Poly vinyl chloride
B. Polyvinylidene
C. Polychlorotrifluroethylene
D. None of the above
88. Main purpose of applying saran and aclarlaminates is to impart
A. Moisture resistance
B. Heat sealability
C. Tensile strength
D. None of the above
89. Ointment tubes are the example of:
A. Primary packaging system
B. secondary packaging system
C. tertiary packaging system
D. All the above
90. The container that protects the contents from extraneous solids and from loss of the article under ordinary or customary conditions of handling, shipment, storage and distribution, according to USP XXVII is called
A. Well closed container
B. Tight container
C. Hermatic container
D. Light resistant container
91. The container that is impervious to air or any other gas under ordinary or customary conditions of handling, shipment, storage and distribution, according to USP XXVII is called
A. Well closed container
B. Tight container
C. Hermetic container
D. Light resistant container
92. The container that protects the contents from contamination by extraneous liquid,solids or vapors and from loss of the article, and from efflorescence, deliquescence or evaporation under ordinary or customary conditions of handling, shipment, storage and distribution, according to USP XXVII is called
A. Tight container
B. Well closed container
C. Light resistant container
D. Hermetic container
93. According to IP 1996, official test for rubber closures are:
A. Fragmentation test
B. Self sealability test
C. Sterilization test
D. All the above
94. As per IP 1996, for fragmentation test number of vials taken initially is
A. 5
B. 8
C. 10
D. 12
95. As per IP 1996, for fragmentation test closures are pierced with the hypodermic needle
A. 21 SWG
B. 1 SWG
C. 11 SWG
D. 31 SWG
96. As per IP 1996, for fragmentation test closures are pierced with the 21 SWGhypodermic needle
A. 2 times
B. 4 times
C. 6 times
D. 10 times
97. As per IP 1996, for fragmentation test closures are pierced with the 21 SWG hypodermic needle 4 times and the liquid is passed through the filter with pore size of:
A. 0.45 µm
B. 0.05 µm
C. 0.5 µm
D. None
98. As per IP 1996, for fragmentation test closures are pierced with the 21 SWG hypodermic needle 4 times and the liquid is passed through the filter with pore size of 0.5 µm. The total number of fragments visible to naked eye should not be more than:
A. 5
B. 10
C. 15
D. None
99. As per IP 1996, for fragmentation test closures are pierced with the 21 SWGhypodermic needle 4 times and the liquid is passed through the filter with pore size of 0.5 µm. The total number of fragments of butyl rubber, visible to naked eye should not be more than:
A. 5
B. 10
C. 15
D. None
100. As per IP 1996, self sealability test for rubber closure is applicable for
A. Single dose containers
B. Multi dose containers
C. Both
D. None of the above
101. As per IP 1996, for Self sealability test number
A. 5
B. 10
C. 15
D. 20
102. As per IP 1996, for Self sealability test closures are pierced with the 21 SWGhypodermic needle
A. 2 times
B. 5 times
C. 10 times
D. 15 times
103. As per IP 1996, for Self sealability test closures are pierced with the 21 SWGhypodermic needle for 10 times and immersed in
A. 0.1% Methyl red
B. 0.1% Methyl orange
C. 0.1% Methylene blue
D. None
104. As per IP 1996, for Self sealability test closures are pierced with the 21 SWGhypodermic needle for 10 times and immersed in 0.1% methylene blue at the pressure of
A. 27 KPa
B. 27 Pa
C. 30 KPa
D. 30 Pa
105. Main constituent of non-stick coating is
A. Polytetrafluoroethylene
B. Polyethylene terephthalate
C. Polystyrene
D. Polypropylene
106. Mylar, Arnite, Impet and Rynite are the trade names of which poltmers
A. Polyethylene terephthalate
B. Polytetrafluoroethylene
C. Polypropylene
D. Polystyrene
107. Presently, Tinfoil is made up of
A. Tin
B. Aluminium
C. Silver
D. All the above
108. Putting a foil lid over the tray section and sealing it to the blister is called
A. Cold form foil blisters
B. Thermoformed blister
C. Tropicalised blister
D. None of above
109. When an aluminium based laminate film is pressed into a mold by means of a stamp so that aluminium is elongated and maintains the formed shape, the blister thus formed is called as
A. Cold form foil blisters
B. Thermoformed blister
C. Tropicalised blister
D. None of above
110. Pinholes are the characteristics feature of
A. Aluminium foil
B. Glass
C. plastics
D. None of above
111. Package integrity test on blister packages can be of
A. Destructive type
B. Non destructive type
C. Both the above
D. None
112. As per USP, for powdered glass test prepared glass specimen should be autoclaved to
A. 121oC for 30 minutes
B. 121oC for 60 minutes
C. 121oC for 15 minutes
D. None
113. As per USP, for powdered glass test prepared glass specimen after autoclaving are titrated with
A. 0.05 N Sulphuric acid
B. 0.05 N Nitric acid
C. 0.02 N Sulphuric acid
D. 0.02 N Nitric acid
114. As per USP Water attack test is carried out at
A. 100 oC
B. 121 oC
C. 27 oC
D. At room temperature
115. As per IP 1996, Leakage test for plastic container is carried out on how many containers?
A. 5
B. 10
C. 15
D. 20
116. As per IP 1996, for Water vopour permeability test for plastic containers for injectable preparations, the condition are:
A. 50 ± 5% at 20 to 25 oC
B. 60 ± 10% at 20 to 25 oC
C. 60 ± 5% at 20 to 25 oC
D. 60 ± 10% at 20 to 25 oC
117. As per IP 1996, for collapsibility test for plastic containers, the container should squeeze at least
A. 50% of its nominal content
B. 70% of its nominal content
C. 90% of its nominal content
D. 100% of its nominal content
118. Missing liner in closure is an example of
A. Critical defect
B. Major defect
C. Minor defect
D. None of above
119. Which type of defect makes the container unacceptable for use:
A. Class A
B. Class B
C. Class C
D. None of above
120. Pulping is the process of manufacture of:
A. Paper
B. Glass
C. Rubber
D. Plastic
121. Fourdrinier System is used for the manufacture of:
A. Glass
B. Paper
C. Plastic
D. Rubber
122. The finishing process in the manufacture of paper is done by applying a solution of gelatin to the paper is called:
A. Finishing
B. Glazing
C. Tub-sizing
D. None of above
123. Which of the following is the process of surface treatment for paper:
A. Cloaking
B. Impregnations
C. Laminations
D. All of above
124. Cobb test is used for testing which of the following:
A. Paper and Board
B. Glass
C. plastics
D. Aluminium foil
125. Flute sizes A, B, C, D, E and F are in the manufacture of
A. Capsule
B. Ampoule
C. Corrugated board
D. None of the above
126. TAPPI and ASTM test methods are used for the evaluation of
A. Corrugated board
B. Plastic containers
C. Rubber closures
D. None of the above
127. Biochemical and physiological effects of the drug and its mechanism of action is studied in the
A. Pharmaceutical Phase
B. Pharmacokinetic Phase
C. Pharmacodynamic Phase
D. Therapeutic Phase
128. Designing of proper dosage regimen is very tedious process for
A. Drugs having low therapeutic index
B. All Drugs
C. Drugs having high therapeutic index
D. Less potent drugs
129. Rapid absorption of lipid-soluble drugs can be achieved by .........................
A. Intravenous route
B. Subcutaneous route
C. Intramuscular route
D. Sublingual route
130. Molecular weight of drug is an important criteria for the drug delivery through
A. Intravenous route
B. Oral route
C. Subcutaneous route
D. Transdermal route
131. Lowest degree of variation in the rate of absorption has been observed in ...
A. Intravenous route
B. Inhalation
C. Oral route
D. Transdermal route
132. Aqueous filled pore are present in cell membrane structure allowing inorganic ionsw and some organic molecules have diameter of ...
A. 40-100 Å
B. 40-100 µm
C. 40-100 nm
D. None of above
133. Core of phospholipids in cell membrane is.
A. Hydrophilic
B. Hydrophobic
C. Amphillic
D. None of above
134. Active and passive processes are the major transport mechanism in case of
A. Transcellular absorption
B. Corpuscular absorption
C. Paracellular absorption
D. None of above
135. Compounds of high molecular weight even above 16,000 can be well absorbed by
A. Splanchnic Circulation
B. Lymphatic Circulation
C. First-pass effect
D. None of above
136. Pharmacokinetics can be defined as:
A. The study of biological and therapeutic effects of drugs
B. The study of absorption, distribution,metabolism and excretion of drugs
C. The study of mechanisms of drug action
D. The study of methods of new drug development
137. The preferable mechanism of absorption for most of drugs in GI tract is:
A. Active transport or carrier-mediated diffusion
B. Filtration or aqueous diffusion
C. Passive diffusion or lipid diffusion
D. Endocytosis and exocytosis
138. Which of the following substances cannot permeate cell membranes by passive diffusion?
A. Unionized substances
B. Lipid-soluble
C. Hydrophobic substances
D. Hydrophilic substances
139. Drugs with lower value of partition coefficient (Ko/w) has the following property:
A. Lower rate of permeation through the lipidic cell membrane
B. Permeation through cell membrane by means of endocytosis
C. Easy permeation through the blood-brain barrier
D. High reabsorption in renal tubules
140. Which is the characteristic of active transport:
A. transport of drug particle by a cell membrane with a new vesicle formation
B. Transport against the concentration gradient
C. Transport of drugs through a membrane by means of diffusion
D. Transport without energy consumption
141. Bioavailability
may be define as?
A. Fraction of an uncharged drug reaching the systemic circulation following any route of administration
B. Amount of a substance in urine relative to the initial dose
C. Permeability through the brain-blood barrier
D. Degree of plasma protein binding of drug substance
142. The main objective for the determination of bioavailability is to study:
A. Extent of absorption and hepatic first-pass effect
B. Rheological parameters of blood
C. Amount of a substance obtained orally and quantity of intakes
D. Glomerular filtration rate
143. Minimum first pass metabolism is observed in which of the following alimentary routes of administration:
A. Oral
B. Transdermal
C. Rectal
D. Intraduodenal
144. Highest first-pass effect is observed in which route of drug administration:
A. Intravenous route
B. Sublingual
C. Oral
D. Intramuscular
145. Characteristic feature of the oral route is:
A. Fast onset of effect
B. The sterilization of medicinal forms is obligatory
C. Absorption depends on GI tract secretion
D. A drug reaches the blood bypassing the liver
146. Characteristic feature of the sublingual route:
A. A drug is exposed to gastric secretion
B. Fast absorption
C. A drug is exposed more prominent liver metabolism
D. A drug can be administered in a variety of doses
147. Which of the following is the parenteral route of medicinal agent administration:
A. Rectal
B. Sublingual
C. Oral
D. Inhalation
148. Characteristic feature of parenteral administration is that:
A. It cannot be used with unconsciousness patients
B. It usually produces a more rapid response than oral administration
C. It generally results in a less accurate dosage than oral administration
D. It is too slow for emergency use
149. Characteristic feature of the intramuscular route of drug administration:
A. Only water solutions can be injected
B. Opportunity of hypertonic solution injections
C. Oily solutions can be injected
D. The action develops slower, than at oral administration
150. Drugs poses difficulty in crossing brain-blood barrier due to:
A. Absence of pores in the brain capillary endothelium
B. High octanol- water partition coefficient of a drug
C. Prominent endocytotic nature of the brain capillaries
D. Meningitis and other inflamed conditions of brain
151. Urinary flow rate often affects the excretion of compounds
A. Whose tubular reabsorption is pHsensitive
B. Whose tubular reabsorption is not affected by pH
C. Whose tubular reabsorption is absent
D. Like strong acids and strong bases
152. Which of the following substances cannot permeate cell membranes by passive diffusion?
A. Unionized substances
B. Lipid-soluble
C. Hydrophobic substances
D. Hydrophilic substances
153. Drugs having pKa values 4-6 are:
A. Weak bases
B. Strong bases
C. Weak acids
D. Strong acids
154. Reabsorption of acidic drugs having pKavalues more than 8
A. Does not occurs
B. Occurs at all urinary pH values
C. Occurs at low urinary pH values
D. Occurs at high urinary pH values
155. Reabsorption of acidic drugs having pKavalues less than 2
A. Does not occurs
B. Occurs at all urinary pH values
C. Occurs at low urinary pH values
D. Occurs at high urinary pH values
156. Reabsorption of weakly basic drugs having pKa values 6 or below
A. Does not occurs
B. Occurs at all urinary pH values
C. Occurs at low urinary pH values
D. Occurs at high urinary pH values
157. Susceptibility to interference by metabolic or competitive inhibitors is the characteristic feature of
A. Active transport
B. Filtration
C. Passive diffusion
D. Endocytosis and exocytosis
158. Permeability constant is independent of:
A. Diffusion coefficient of the drug through the membrane
B. Membrane thickness
C. Partition coefficient of the drug between membrane and donor medium
D. Surface area of membrane
159. Under Biopharmaceutics Classification System drugs are classified on the basis of:
A. Intestinal permeability of drugs
B. Solubility of drugs
C. Both the parameters
D. None of the above
160. A drug with high solubility and high permeability is classified as
A. BCS Class I drug
B. BCS Class II drug
C. BCS Class III drug
D. BCS Class IV drug
161. A drug with low solubility and low permeability is classified as
A. BCS Class I drug
B. B CS Class II drug
C. BCS Class III drug
D. BCS Class IV drug
162. A drug with high solubility and low permeability is classified as
A. BCS Class I drug
B. BCS Class II drug
C. BCS Class III drug
D. BCS Class IV drug
163. A drug with low solubility and high permeability is classified as
A. BCS Class I drug
B. BCS Class II drug
C. BCS Class III drug
D. BCS Class IV drug
164. Which statement is correct in context to Absolute solubility and Dissolution rate:
A. Both are static process
B. Both are dynamic process
C. Absolute solubility is a static process while Dissolution rate is a dynamic process
D. None of above
165. In vivo dissolution rate is always .......... than in vitro dissolution rate
A. Lesser
B. Greater
C. Similar
D. None of above
166. Which of the following equations accounts for change in surface area accompanying dissolution
A. Noyes – Whitney’s Equation
B. Fick’s law
C. Hixson Crowell cube root law of dissolution
D. None of above
167. In case of carrier mediated transport, the area in which the carrier system is most dense is called
A. Absorption window
B. Carrier window
C. Diffusion window
D. None of above
168. The oesophageal transit of most of the dosage forms is of order of
A. 10-15 minutes
B. 4-5 minutes
C. 1-2 minutes
D. 10-15 seconds
169. Pepsin is denatured at pH
A. 1-2
B. 3-4
C. 4-5
D. 6-7
170. The controlling factor in the onset of drug absorption from the small intestine is
A. Rate of drug dissolution
B. Rate of gastric emptying
C. Rate of chewing
D. None of above
171. Small intestine is an excellent site of absorption due to the presence of
A. Folds of Kerckring
B. Villi
C. Microvilli
D. All of above
172. Which of the phase of gastric emptying process is called housekeeper wave
A. Phase I
B. Phase II
C. Phase III
D. Phase IV
173. Blood flow to gastrointestinal tract is and liver is
A. Increased after meals
B. Decreased after meals
C. Not affected by the meals
D. None of above
174. In which transport mechanism, no further increase in rate of absorption is observed at higher concentrations
A. Passive process
B. Active process
C. First-pass effect
D. None of above
175. Vitamin A, D, E and K are mainly absorbed by
A. Endocytosis
B. Pinocytosis
C. Facilitated diffusion
D. Phagocytosis
176. Polio and other vaccines administered orally are mainly absorbed through the process of
A. Pinocytosis
B. Endocytosis
C. Phagocytosis
D. Facilitated diffusion
177. The process by which the material is internalised by the membrane is transported through the cell and is secreted on the other side is called
A. Pinocytosis
B. Endocytosis
C. Phagocytosis
D. Transcytosis
178. The molecular weight cut off for paracellular route is
A. 200 Da
B. 400 Da
C. 700 Da
D. 50 Da
179. The most common example of counter transport efflux protein that is responsible for expelling specific drugs back into the lumen of gastrointestinal tract is
A. Albumin
B. P- glycoprotein
C. Globulin
D. None of the above
180. Bioavailability of drugs which are unstable in gastric fluids can be
A. Increased on reducing particle size
B. Decreased on reducing particle size
C. Remain uneffective on reducing particle size
D. None of the above
181. Some drugs particularly those that are of hydrophobic in nature dry particle size reduction techniques
A. Result in aggregation of particles
B. Result in enhanced bioavailability
C. No effect on bioavailability
D. Result in increase in effective surface area
182. A strongly basic salt of a weakly acidic drug is expected to give
A. More absorption from git than free acid form
B. Less absorption from git than free acid form
C. Similar absorption from git than free acid form
D. None of the above
183. A strongly acidic salt of a weakly basic drug is expected to give
A. More absorption from git than free acid form
B. Less absorption from git than free acid form
C. Similar absorption from git than free acid form
D. None of the above
184. Solubility of sulphate salt of a drug is
A. Equal to its hydrochloride salt in git
B. More than its hydrochloride salt in git
C. Less its hydrochloride salt in git
D. None of the above
185. The inclusion of basic excipients in the formulation of aspirin tablet can
A. Enhance dissolution and bioavailability
B. Reduce dissolution and bioavailability
C. Not alter dissolution and bioavailability
D. None of the above
186. Higher bioavailability is observed in case of
A. Stable polymorphs
B. Metastable polymorphs
C. Unstable polymorphs
D. All the above
187. In ancient time dried animal parts, herbs, plant parts, honey and minerals were used as:
A. Food source
B. Dentifrices
C. Vehicles
D. Non of above
188. Abrasives, Detergent, Flavours are the ingredients of:
A. Face wash
B. Cream
C. Tooth pest
D. Soap
189. Hardness of an abrasive used in tooth pest preparation is depends on
A. Partial size
B. Chemical nature
C. Impurities
D. Both A and C
190. The amount of an abrasive should be...........Of total weight of tooth pest.
A. 50%
B. 70%
C. 30%
D. 80%
191. Most commonly used abrasive is:
A. Aluminium sulphate
B. Calcium carbonate
C. Magnesium trisilicate
D. Dicalcium phosphate
192. Calcium carbonate imparts ..... To the rooth pest preparation
A. Acidity
B. Alkalinity
C. Both
D. No one
193. ........... Is the native form of raw calcium carbonate
A. Stone
B. Sand
C. Chalk
D. Clay
194. Dicalcium phosphate imparts ............PH in the tooth pest preparation.
A. Acidic
B. Neutral
C. Basic
D. All of above
195. Hydrated magnesium silicate is used as an abrasive and ............
A. Antacid
B. Laxatiive
C. Purgative
D. Anti emetic
196. Most commonly used detergent is:
A. Sodium lauryl sulfate
B. Magnesium lauryl sulfate
C. Diethyl sodium lauryl sulphosuccinate
D. All of above
197. The higher amount of humectant in a toothpaste formulation is:
A. 10%
B. 20%
C. 30%
D. 40%
198. The actual amount of humectant in a toothpaste formulation is decided by
A. Viscosity
B. Density
C. Molecular weight
D. All of above
199. In which concentration binding agents are used:
A. 1-2.5
B. 1-2
C. 1-3
D. 1-1.5
200. To prevent the formation of lumps in a tooth paste formulation what is added:
A. Glycerin
B. Alcohol
C. Tragacanth
D. Both A and B
201. Mucilages of chondrus and Irish moss is Incorporated in a tooth paste formulation as a:
A. Detergent
B. Binding agent
C. Humectant
D. Flavours
202. Sodium saccharine is used in...............In tooth paste
A. 0.05 to 0.1
B. 0.05 to 0.23
C. 0.05 to 0.31
D. 0.05 to 0.38
203. ............. Is a sweetening agent which is band due to its toxicity.
A. Cyclamate
B. Sucrose
C. Maltose
D. None of above
204. Cinnamon oil, clove oil, peppermint oil, cassia oil are used in a tooth paste as :
A. Sweetening agent
B. Flavours
C. Both A and B
D. No one
205. Which is used as a bleaching agent in tooth paste
A. Sodium benzoate
B. Sodium perborate
C. Sodium selisylate
D. Sodium carbonate
206. What can be used in a tooth paste for halitosis:
A. Carbohydrates
B. Chlorophyll
C. Starch
D. Resins
207. Which part of a teeth does not contain living cells but is like bone
A. Enamel
B. Dentine
C. Cementum
D. All of above
208. The periodontal ligament is made up of:
A. Collagen fibers
B. Elastic fibers
C. Lignin fiber
D. None of above
209. The outer layer of teeth enemal is made up of
A. Calcium carbonate
B. Calcium citrate
C. Calcium phosphate
D. Calcium gluconate
210. The hardest biologically substance is
A. Bone
B. Muscle
C. Dentine
D. Nail
211. Which glycoprotein is responsible for the lubrication action of the saliva:
A. Albumin
B. Casin
C. Mucin
D. Muceins
212. 75% of saliva is secreted by
A. Submandibular gland
B. Parotid gland
C. Sublingual
D. All of above
213. Which immunoglobulin is present in saliva for control of bacteria:
A. Ig G
B. Ig A
C. Ig E
D. Ig B
214. The bacteria responsible for pulpits is
A. Acne vulgeris
B. S. Mutans
C. Vulgeris
D. E. Coli
215. Sodium lauryl sarcosinate is used as:
A. Anti - cariogenic
B. Anti - enzyme
C. Bacteriostatic
D. Bacteriostatic
216. Which one combines with tooth enamel and form insoluble tin oxide to prevent pith decay:
A. Stannous chloride
B. Strontium chloride
C. Stannous fluoride
D. All of above
217. In the manufacturing of tooth powder the mixer is used:
A. Ribbon type
B. Agitator type
C. Sigma type
D. Both A and B
218. What is the percentage of the soap in soap containing solid dental products:
A. 20-30%
B. 20-40%
C. 20-50%
D. 20-60%
219. Evaluation parameters for a tooth paste is:
A. Abrasiveness
B. Limit test of arsenic and lead
C. Consistency
D. All of above
220. A good mouthwash should have
A. Quick antiseptic action
B. Sweet taste
C. Non irritant
D. All of above
221. Mouthwashes are ........... Solutions which are used in oral cavity.
A. Acidic
B. Alcoholic
C. Basic
D. None of above
222. In a mouthwash preparation, phenol is used as:
A. Antiseptic
B. Flavour
C. Astringent
D. All of above
223. In which concentration the chlorothymol is used in a mouth wash preparation
A. 0.1-1%
B. 0.3-0.5%
C. 0.05-0.1%
D. 0.05-0.3%
224. The quaternary ammonium compounds are active at which pH
A. Acidic
B. Basic
C. Neutral
D. All of above
225. Tincture of cinchona, benzoin tincture are Incorporated in a mouthwash for:
A. Astringent
B. Stimulant
C. Flavouring agent
D. All of above
226. Which is used am a vehicle in mouthwash
A. Alcohol
B. Water
C. Alcohol and water in combination
D. None of above
227. Glycerin is Incorporated in a mouthwash preparation for
A. Sweetening agent
B. Flavor
C. Demulcent
D. All of above
228. Which instrument is used to detect the deodorizing effect of mouthwash:
A. Gas chromatograph
B. Fair-wells osmoscope
C. Both A and B
D. None of above
229. What is evaluation parameters firm mouthwash:
A. Spreadability
B. Dilution test
C. Burning test
D. None of above
230. Deodorizing effect of mouthwash is done by:
A. Chemical analysis
B. Surface tension
C. Physical analysis
D. All of above
231. The essential growth factor or component of nails are:
A. Amino acids
B. Vitamins
C. Essential fatty acids
D. All of above
232. Eponychium is formed by the extension of a portion of ............. of the nail root.
A. Stratum corneum
B. Stratum granulosam
C. Stratum spinosam
D. Stratum germilative
233. The pale crescent produced by abscured blood vessels near the nail root is called:
A. Hyponychium
B. Lunula
C. Eponychium
D. None of above
234. In AIDS, Thyroid and Respiratory disease diagnosis which colour of nail is aindication:
A. Red
B. Black
C. Yellow
D. None of above
235. In ............the nail may become pitted and distorted.
A. Geridiasis
B. Trichomoniasis
C. Vaginitis
D. Psoriasis
236. The content of water water in nail is:
A. 10-15%
B. 10-12%
C. 12-14%
D. 14-18%
237. Leukonychia is disorder of:
A. Hair
B. Nail
C. Skin
D. Teeth
238. Brittleness of nail is caused by:
A. Anaemia
B. Avitaminosis
C. Both A and B
D. None of above
239. Which is not a characteristic of a good nail lacquer:
A. Good gloss
B. Good adhesion
C. Good cleansing
D. Quick drying
240. In an Nail preparation Nitrocellulose, ethyl cellulose, methacrylate and vinyl resin are used for the purpose of
A. Solvent
B. Resin
C. Film forming substance
D. Pigments
241. Nitrocellulose film is better in terms of:
A. Toughness
B. Hardness
C. Low solvent retention
D. All of above
242. Modified resin is used along with nitrocellulose to overcome the:
A. Poor adherence
B. Poor gloss
C. None of obove
D. Both A and B
243. Presently used resin in an Nail preparation is:
A. Gum damar
B. Sulphonamide - formaldehyde resin
C. Gum copal
D. Shellac
244. Polyvinyl acetate, Epoxy ester, coumaroninden polymer is used as:
A. Resin
B. Solvent
C. Film former
D. Colours
245. Ether, Acetone, Benzen and toluene is used as n an Nail preparation.
A. Solvent
B. Diluent
C. Plasticizer
D. Colours
246. Diluents are Incorporated in an Nail preparation to
A. Stabilize the viscosity
B. Solubilization of resin
C. Better effect on enamel
D. All of above
247. Non solvent plasticizer act as ........... In the Nail paint preparation.
A. Softener
B. Film former
C. Both
D. None of above
248. The total percentage of plasticizer in nail preparation is
A. 2%
B. 5%
C. 8%
D. 10%
249. Which is a plasticizer
A. Urea derivative
B. Resorcinol
C. Castor oil
D. All of above
250. .............. % of titanium dioxide or lithopone is Incorporated in nail preparation to achieve opacity.
A. 2%
B. 4%
C. 5%
D. 7%
251. In an Nail preparation to obtain brown and tan shades what is used:
A. Iron sulfate
B. Copper sulfate
C. Magnesium oxide
D. Iron oxide
252. Nacreous pigment used to impart Appearance.
A. Iridescent
B. Gold
C. Silver
D. Creamy
253. Acetone, ethyl acetate, and toluene applied on nail as a
A. Detergent
B. Perfume
C. Lacquer remover
D. All of above
254. To overcome the unpleasant odour of lacquer what is added into it:
A. Orang oil
B. Terpenes
C. Terpienol
D. All of above
255. What is evaluation parameters for Nail lacquer:
A. Drying rate
B. Hardness
C. Viscosity
D. All of above
256. Which is not an auxiliary product or nails:
A. Nail cream
B. Nail bleach
C. Nail lacquer
D. Nail whitener
257. In cutical Softener the concentration of Quaternary ammonium compounds is
A. 3-5%
B. 3-10%
C. 3-15%
D. 3-20%
258. In cutical Softener for swelling of keratin and softening of cutical what is used:
A. Quaternary ammonium compounds
B. Urea
C. Lanolin
D. None of above
259. Potassium hydroxide is used as ............. In Nail care preparation.
A. Cutical Softener
B. Cutical remover
C. Both
D. None of above
260. What is Incorporated in cutical remover to counteract the irritation coused by alkali.
A. Humectant
B. Disinfectant
C. Acidifier
D. All of above
261. What type of preparation is used to remove the nail strains and to discoloration of nail.
A. Cutical remover
B. Nail paint
C. Nail bleaches
D. All of above
262. Oxidizing agents used for bleaching of nail is
A. Hydrogen peroxide
B. Sodium perborate
C. Both
D. None of above
263. Population density of normal adult scalp hair is:
A. 225 hair cm square
B. 335 hair cm square
C. 445 hair cm square
D. 555 hair cm square
264. which part of body hairs have highest rate of growth
A. Scalp
B. Chin
C. Eyelashes
D. Both A and B
265. The per day growth of hair on scalp is:
A. 0.25 - 0.42 mm per day
B. 0.27 - 0.40 mm per day
C. 0.32 - 0.51mm per day
D. 0.34 - 0.38 mm per day
266. Carbon, nitrogen, phosphorus, and sulfur are responsible for ................. Of hair.
A. Red
B. Brown
C. Grey
D. white
267. What is present in more quantity in red hair
A. Iron
B. Sulfur
C. Phosphorus
D. Carbon
268. A good shampoo have characteristics like
A. Removal of wast substance
B. Produce sof, lustrous hair
C. Imparts fragrance
D. All of above
269. What is main component of shampoo:
A. Surfactant
B. Sequestrant
C. Pearlscent agents
D. All of above
270. Which type of surfactant are used in shampoo
A. Cationic
B. Anionic
C. Ampholytic
D. All of above
271. What is used as principal surfactant:
A. Anionic surfactant
B. Non ionic surfactant
C. Cationic surfactant
D. Ampholytic surfactant
272. What is widely used for anionic surfactant in shampoo
A. Alkyl sulphates
B. Alkyl glycol sulphates
C. Both
D. None of above
273. Alkyl sulphonate are formed of catalytic reduction of fatty acid of ..................
A. Coconut
B. Butter
C. Soya
D. All of above
274. Which is not an example of anionic surfactant:
A. Sodium lauryl sulfate
B. Triethanol
C. Methyl taurides
D. Monoethanol
275. Which one is used in powder sampoos because of less hygroscopicity:
A. Sodium lauryl sulfate
B. Magnesium lauryl sulfate
C. Monoethanol lauryl sulfate
D. Ammonium lauryl sulfate
276. Methyl taurides is ............... type of surfactant
A. Anionic
B. Cationic
C. Non ionic
D. Amphoteric
277. In sodium lauryl sulfate, monoethanolamides are added to increase:
A. Viscosity
B. Solubility
C. Density
D. All of above
278. Mono alkyl sulphosuccinates are non irritant to eyes thus may be used in:
A. Hair shampo
B. Body shampo
C. Both
D. None of above
279. Methyl taurides leave the gairon excellent condition because of the presence of:
A. Amide group
B. Ether group
C. Ester group
D. All of above
280. Acyl sarcosins contain CON group and have conditioning effect and used alongwith:
A. Alkyl nitrates
B. Alkyl carbonates
C. Alkyl sulphates
D. Alkyl acetates
281. Which one of this is used in oil shampoo to form a light coating:
A. Turkey red oils
B. Turkey green oil
C. Turkey clean oil
D. All of above
282. Benzalkonium chloride is Incorporated in a shampoo preparation as a:
A. Detergent
B. Anti-dandruff
C. Conditioning agent
D. Thickening agent
283. Which one is a phenol derivative used as Germicide in a shampoo preparation?
A. Benzalkonium chloride
B. Cadmium sulphide
C. Sodium sulphacitamide
D. Tetramethyl thiuram sulphide
284. Which one of this a Anti dandruff agent:
A. Selenium sulphide
B. Sulphonated caster oil
C. Methyl cellulose
D. All of above
285. Conditioning agents are fatty acid substance like:
A. Lanolin
B. Oils
C. Amino acids
D. All of above
286. What is the PH rang at which pearl scent agents show their better action:
A. 4-5
B. 4.5-5
C. 5-6
D. 5.5-6
287. What concentration of a pearl scent agent is used in a shampoo preparation.
A. 0.2-1%
B. 0.5-1%
C. 0.5-2%
D. 0.5-0.8
288. Sodium salt of EDTA is Incorporated in shampoo preparation as a
A. Thickening agent
B. Detergent
C. Sequestrant
D. Pearlscent agent
289. Example of thickening agent is:
A. Alginates
B. Methyl cellulose
C. Colloidal silica
D. All of above
290. Formaldehyde ans p-hydroxy benzoic acids added in shampoo preparation as
A. Perfume
B. Colour
C. Preservatives
D. All of above
291. Liquid cream shampoo are expected to be mild and in action.
A. Emollient
B. Demulcent
C. Anti adherent
D. None of above
292. what is the characteristic of a hair tonic:
A. Counter irritant
B. Antiseptic
C. Conditioning
D. All of above
293. For dry scalp which type of hair tonic is used
A. Oily tonic
B. Alkaline tonic
C. Acidic tonic
D. None of above
294. For oily scalp which type of tonic is used
A. Oily tonic
B. Acidic tonic
C. Alkaline tonic
D. All of above
295. The concentration range of alcohol for vehicle in hair tonic is
A. 10-90%
B. 10-85%
C. 10-95%
D. All of above
296. Which of the action is imparted by alcohol present in hair tonic.
A. Removal of acid-protein complex
B. Addition of fatty acid-protein complex
C. Removal of dust particals
D. None of above
297. What can also be used in place of alcohol to get emollient and lubricant action:
A. Isopropyl alcohol
B. Glycerin
C. Cholesterol
D. Resorcinol
298. What kind of drugs are Incorporated in hair tonic to stimulate hair growth:
A. Emollient
B. Demulcent
C. Rubefacient
D. All of above
299. Agents used in hair tonic to increase temperature and localized circulation are
A. Capsicum
B. Sulphur
C. Mercuric chloride
D. All of above
300. Which one of this have an effect on the activity of sebaceous gland and hair formation.
A. Mercuric chloride
B. Pilocarpine
C. Ammonia
D. Cholesterol
301. Polyxyethylene condensation product of wool wax alcohol is used as
A. Solubilizer
B. Permeation enhancer
C. Viscosity enhancer
D. Conditioner
302. What is used to treat skin irregularities
A. Vitamin E
B. Vitamin F
C. Vitamin C
D. Vitamin B
303. Resorcinol and it’s mono acetate have powerful .............. Action.
A. Antiseptic
B. Antispasmodic
C. Anti arrhythmic
D. None of above
304. What is responsible for the toxicity of resorcinol used in hair tonic:
A. Cetomacrogol
B. Pantothenic acid
C. Resorcinol
D. Mercuric chloride
305. Which one of these used to increase the solubility of beta napthol used in hairtonic.
A. Boric acid
B. Tartaric acid
C. Sulfuric acid
D. None of above
306. Which form of capsaicin is used in hairtonic?
A. Solution
B. Tincture
C. Paste
D. All of above
307. Conditioners are usually based on............ And fatty materials.
A. Anionic detergent
B. Cationic detergent
C. Non ionic detergent
D. Amphoteric detergent
308. Which country used natural occurring colouring agent Kohl as a hair colourant.
A. Egyptian
B. Unani
C. American
D. Russian
309. What is the constituent of Kohl used as hair color?
A. Lead acetate
B. Lead chloride
C. Lead sulfate
D. All of above
310. What is the characteristics of hair color.
A. Non toxic
B. Dermititic sensitizer
C. Easy to apply
D. All of above
311. What is the important factor while selecting a hair dye?
A. Molecular size
B. PH
C. Solubility
D. Both A and B
312. What is the color imparting duration of temporary colorants?
A. First shampoo
B. Fourth shampoo
C. Sixth shampoo
D. Both B and C
313. Vinegar or lemon oil is used in early time to neutralize the effect of
A. Detergent
B. Alkali
C. Conditioner
D. All of above
314. Simple powder dyestuff are used in a
A. Sachet
B. Tablet
C. Capsule
D. Both A and C
315. Temporary colorants penetrate which membrane of hair
A. Cutical
B. Cortex
C. Medulla
D. All of above
316. What is the PH of temporary colorants
A. 3
B. 5
C. 7
D. 8
317. The time duration of semi permanent colorants is:
A. First shampoo
B. Six to eight shampoo
C. More than eight shampoo
D. None of above
318. The semi permanent has
A. High risk to damage hair
B. Less risk to damage hair
C. No risk
D. None of above
319. What is basic dyestuff of semi permanent colorants
A. Nitro amino dye
B. P toluenediamine dye
C. Quaternary ammonium dye
D. All of above
320. Which color imparted by picramic acid in semipermanent colourant
A. Red
B. Yellow
C. Both
C. None of above
321. What color imparted by anthraquinone to make brown shade
A. Green
B. Blue
C. Light brown
D. Chocolaty
322. By which process color complex formed
A. Mixing of anionic surfactant with dyestuff solution
B. Mixing of cationic surfactant with Anionic dyestuff
C. Mixing of anionic surfactant with cationic surfactant
D. All of above
323. P-phenylene diamine is a .................... dye
A. Oxidation dye
B. Vegetable dye
C. Salt of heavy material
D. None of above
324. P-tolulenediamine is a type of dye
A. Temporary
B. Semi permanent
C. Permanent
D. All of above
325. P-TOLULENEDIAMINE is also incorporate ............. In hair
A. Conditioning effect
B. Cleaning effect
C. Toxicity
D. Surfactant
326. What is the example of vegetable dye
A. Lawsonia alba
B. P-toluenediamine
C. Picramic acid
D. None of above
327. What is the example of vegetable dye
A. Lawsonia alba
B. P-toluenediamine
C. Picramic acid
D. All of above
328. At what ph the henna works properly
A. 2.5
B. 4.5
C. 5.5
D. 6.5
329. What is responsible for production of color by metallic dyes
A. Formation of sulfides by sulfur
B. Formation of metallic oxides
C. Both
D. None of above
330. Which one affects the colouring property of lead dyes
A. Concentration of lead
B. Nature of dye
C. Air
D. Light
331. What can be added to modify the colour produced by the silver dyes
A. Copper
B. Aluminium
C. Iron
D. Arsenic
332. Bleaches imparts it’s action by the mechanism:
A. Production of karatin
B. Destruction of karatin
C. Production of Melanin
D. Destruction of melanine
333. What is the percentage of hydrogen peroxide for the domestic use as the bleach:
A. 3-4%
B. 5-6%
C. 7-8%
D. 10%
334. In what percentage the alkaline hydrogen peroxide is used as a bleaching agent:-
A. 3-4%
B. 5-6%
C. 7-8%
D. 10%
335. Acetanilide, diluted acids, and ammonium bisulphate is used as In bleaching agent.
A. Solubility enhancer
B. Stabilizer
C. Permeation enhancer
D. None of above
336. Turkey red oil is used as ...................
A. Bleaching agent
B. Hair softener
C. Dye remover
D. All of above
337. Which one used as a oxidation dye remover:-
A. Turkey red oil
B. Sodium dithionate
C. Hydrogen peroxide
D. None of above
338. What should be the iodine number for a vegetable oil used in brilliantine.
A. Less than 105
B. More than 105
C. 105
D. None of above
339. For what tocopherol is used in brilliantine preparation.
A. Antioxidant
B. Bleaching agent
C. Reductant
D. None of above
340. Which one is used to prevent rancidity
A. Propyl p-hydroxy benzoate
B. NDGA
C. Both
D. None of above
341. What is the strength of phenol derivatives used as Preservatives
A. 10%
B. 20%
C. 30%
D. 50%
342. Which is the non ionic surfactant used in hair cream
A. Span
B. Wool alcohol
C. Lanolin
D. All of above
343. What is the strength of calcium hydroxide in hair cream
A. 0.1%
B. 0.14%
C. 0.12%
D. 0.18%
344. Which can be used in a hair cream to impart higher concentration:-
A. Calcium adipate
B. Calcium oxalate
C. Calcium saccharate
D. All of above
345. What is the action of zinc stearate in a hair cream:-
A. Viscosity enhancer
B. Smoothness provider
C. Solublizer
D. Stabilizer
346. The concentration of fatty substance in shaving soap is:-
A. 30%
B. 50%
C. 67%
D. 80%
347. Which one of these is a widely used and advanced preparation used for shaving with razor blade:-
A. Shaving soap
B. Brush less shaving cream
C. Aerosol preparation
D. None of above
348. Determination of potash soap, foam formation and Determination of total fatty acid are the evaluation parameters of
A. For shaving preparation
B. For after shave preparation
C. Both
D. None
349. Which one of these is a evaluation parameter for after shave preparation:-
A. Skin sensitization test
B. Determination of alcohol content
C. Determination of fatty materials
D. Stability of cream
350. Which layer of the skin is in direct contact of any cosmetic preparation
A. Stratum corneum
B. Stratum lucidium
C. Stratum granulosa
D. Stratum germilative
351. What is the characteristics of an ideal face powder
A. Adhere to skin
B. Must ne absorbant
C. Hide skin blemishes
D. All of above
352. Which one is not an ideal characteristics of good raw material used in power
A. Non irritating and non toxic
B. Chemically neutral
C. Should not hard
D. Nome of above
353. For what purpose titanium dioxide is Incorporated in powder
A. As a frosted look material
B. As a material imparting slip
C. Material imparting covering character
D. All of above
354. What should be tha particles size rang for song oxide to show good covering:-
A. Below 0.25 um
B. 0.25um
C. Above 0.25um
D. All of above
355. Which one of these used for face powder and talcum powder
A. Magnesium stearate for face powder and zinc stearate for talcum powder
B. Zinc stearate for face powder and magnesium stearate for talcum powder
C. Both
D. None of above
356. Which is the best quality talc for gave and body powder:-
A. Italian talk
B. Russian talc
C. American talk
D. Indian talc
357. What is the main use of colloidal kaolin in a face, body or baby powder
A. Absorbance characteristic
B. Imparts patch like finish
C. Imparts adhesion
D. Cover the face and body
358. Which one is not a material that impart absorbency in a face powder:-
A. Colloidal kaolin
B. Linolin
C. Calcium carbonate
D. Bentonite
359. What is the swelling power of bentonite of its own volume:-
A. 8 times
B. 10 times
C. 12 times
D. 15 times
360. What should be the maximum percentage of powdered silica used as material imparting peach like finish in face powder.
A. 20%
B. 30%
C. 50%
D. 80%
361. Which type of starch grade is used as the material imparting peach like finish.
A. Maize starch
B. Starch 180
C. Starch 360
D. None of above
362. What is the alternative replacement of guanine which was used for frosted look material?
A. Bismuth subnitrate
B. Bismuth subcitrate
C. Bismuth oxychloride
D. All of above
363. Mica, aluminum and bronze are the substance used as ..................
A. Colouring substance
B. Material imparting peach like finish
C. Slip and softners
D. Frosted look material
364. Which one is not uses the colouring agents in the preparation?
A. Face powder
B. Compacts
C. Both
D. None
365. Covering power of a face powder is
A. Mask alone shine
B. Enlarged force
C. Minor blemishes
D. All of above
366. What should we call the ability to impart velvety, peach like finish produced by face powder?
A. Slip
B. Adhesivness
C. Bloom
D. Absorbancy
367. What is Incorporated in the medium type of face powder to balance it’s cohesiveness?
A. Zinc oxide
B. Zinc stearate
C. Zinc Fluoride
D. Zinc chloride
368. What is the introduction year of compact powder in america:-
A. 1920
B. 1930
C. 1940
D. 1950
369. What is the example of dry binder used incompact face powder?
A. Zinc stearate
B. Isopropyl myristate
C. PVP
D. None of above
370. What is required to impart firm compacting in compact face powder?
A. Increased temperature
B. Increased pressure
C. Increased density
D. None of above
371. Which is not an example of water soluble binder used in compact face powder
A. PVP
B. Methyl cellulose
C. Gum tragacanth
D. Glycerol mono stearate
372. To overcome the problem of nonuniformity, loss of moisture, which type or binder is used in compact powder:-
A. Emulsion binder
B. Water soluble binder
C. Oil binder
D. Dry binder
373. Which method is widely and commercially used for the production of compact powder:-
A. Dry mathod
B. Wet mathod
C. Damp method
D. None of above
374. Which ingredient is used in highest quantity in powders
A. Talc
B. Colouring agents
C. Binders
D. Perfume
375. What is the other name of body powder:-
A. Talcum powder
B. Dusting powder
C. Both
D. None
376. What is the main use of body powder
A. To absorb moisture
B. Perspiration after bathing
C. Cover large surface area
D. All of above
377. What ingredient body powder have which become it different:-
A. Adhesive
B. Slip
C. Antiseptic
D. Covering material
378. For which purpose Boric acid and bithional are Incorporated in body powder:-
A. Slip
B. Antiseptic
C. Covering material
D. Adhesive
379. What is the evaluation parameter for powder
A. Pay off
B. Flow property
C. Particle size
D. All of above
380. What should be the height limit for the breakage test of powder evaluation:-
A. 10 inch
B. 15 inch
C. 20 inch
D. 25inch
381. What is beauty aids:-
A. Skin colorants
B. Powders
C. Cream
D. None of above
382. What is the psychological motives to use skin colourant:-
A. Decoration
B. Well groomed appearance
C. Attract opposite sex
D. All of above
383. What is absent in the lip skin
A. Sweat glands
B. Salivary glands
C. Both
D. None
384. Lips are almost entirely free from
A. Muscle
B. Fat
C. Hypodermis
D. All of above
385. Which layer of lip tends to dry and crack slip in cold or dry weather:-
A. Stratum germinative
B. Hypodermis
C. Corneal layer
D. None of above
386. What should not impart by the lipstick
A. Brittleness
B. Tacky
C. Both
D. None
387. Plasticity is the characteristics of .................
A. Powder
B. Hair remover
C. Lipstick
D. None of above
388. What is the characteristics of a lipstick:-
A. Good degree of indelibilit
B. Free from bloom
C. Retain plasticity
D. All of above
389. What should be the melting point of base used in lipstick to withstand weather
A. 60
B. 62
C. 65
D. 70
390. Which one is used in lipstick as raw material:-
A. Wax mixture
B. Oil mixture
C. Bromo mixture
D. All of above
391. What is responsible for the gloss and hardness property of lipstick:-
A. Waxes
B. Oils
C. Bromo mixture
D. Preservatives
392. What is the percentage of white beeswax of total formula
A. 3 to 10%
B. 5 to 12 %
C. 4 to 8 %
D. None of above
393. What is the additional property of beeswax
A. Shrinks on heating
B. Distribute on heating
C. Distribute on heating
D. Distribute on cooling
394. Which one is used in lipstick having melting point of 65-69 C and used in5-10% :-
A. Bees wax
B. Candelilla wax
C. Ceresin wax
D. Carnauba wax
395. What is used in excess in lipstick to get smooth and glossy appearance:-
A. Ozokwrite wax
B. Cetyl alcohol
C. Bees wax
D. Candelilla wax
396. Cetostearyl alcohol is Incorporated to impart
A. Emollient