Recording Audio: Engineering in the Studio
By Barry R Hill
()
About this ebook
Whether you use the latest DAW software or an analog console, having a well-grounded knowledge of recording systems will help you become a more effective engineer. The basics never change—signal flow, mic technique, recording procedures, and good ears are crucial for getting great recordings. Recording Audio is designed to introduce new engineers to the recording process, providing plenty of hands-on suggestions and help along the way.Topics discussed include:Tracking, mixing, & masteringMicrophone design & techniqueSignal processors & applicationPodcast & voice recordingAudio for video, film, & TVAnalog & digital recordingAcoustics & studio designRecording for music educatorsThis is audio, after all, so there are lots of listening examples to help you understand what's being described. If you take time to work through the book and begin hearing the nuances of the audio samples, you'll have a solid start toward developing as an engineer.
Read more from Barry R Hill
Podcast Audio: Make Your Show Sound As Good As Your Content Rating: 0 out of 5 stars0 ratingsImagineering an American Dreamscape: Genesis, Evolution, and Redemption of the Regional Theme Park Rating: 0 out of 5 stars0 ratings
Related to Recording Audio
Related ebooks
How To Get A Quality Audio Recording: So, You Want to Be An Audio Engineer Rating: 0 out of 5 stars0 ratingsMusic Production: How to Produce Music, The Easy to Read Guide for Music Producers Introduction Rating: 4 out of 5 stars4/5Make Music, Make Money Rating: 0 out of 5 stars0 ratingsHow to Start Your Own Business as a Narrator or Voice Over Actor: Fun Part Time Business Rating: 5 out of 5 stars5/5Audio Manual for Podcasts: Learn Digital Audio Basics and Improve the Sound of your Podcasts: Stefano Tumiati, #4 Rating: 0 out of 5 stars0 ratingsThe Podcaster's Audio Handbook: A Technical Guide for Creative People Rating: 0 out of 5 stars0 ratingsVideographer's Audio Handbook Rating: 0 out of 5 stars0 ratingsHome Recording Awesomeness: 6 Mostly Free Tips For Making Your Audio Sound Expensive Rating: 0 out of 5 stars0 ratingsSo, You Want To Be An Audio Engineer: A Complete Beginners Guide.: So, You Want to Be An Audio Engineer, #1 Rating: 0 out of 5 stars0 ratingsNarrate and Record Your Own Audiobook: a Simplified Guide: Strategies for Success, #4 Rating: 0 out of 5 stars0 ratingsPro Audio Mastering Made Easy: Give Your Mix a Commercial Sounding Finish Without Buying More Gear Rating: 5 out of 5 stars5/5Secrets to Building a Home Recording Studio: The Complete Guide Rating: 4 out of 5 stars4/5Audio Mastering in a Project Studio: A Practical Approach for a Professional Sound Rating: 0 out of 5 stars0 ratingsHow To Build A Home Recording Studio Rating: 4 out of 5 stars4/5Audiobook Narration How-To Guide Rating: 0 out of 5 stars0 ratingsiHi-Fi Audio Setup Guide: Enjoy More Authentic Music From Any High Fidelity Audio System Rating: 5 out of 5 stars5/5Pro Tools For Breakfast: Get Started Guide For The Most Used Software In Recording Studios: Stefano Tumiati, #2 Rating: 0 out of 5 stars0 ratingsSound Advice: Voiceover from an Audio Engineer's Perspective Rating: 0 out of 5 stars0 ratingsSynthesizer Cookbook: How to Use Filters: Sound Design for Beginners, #2 Rating: 3 out of 5 stars3/5Music Production | 2024+ Edition: The Professional Studio Guide for Producers, Songwriters, Artists & Audio Mastering Engineers Rating: 0 out of 5 stars0 ratingsMake Video Book Money Rating: 0 out of 5 stars0 ratingsThe Impulse Response Bible Rating: 0 out of 5 stars0 ratingsBeginner’s Guide to Information Marketing: Your First Audio Product Rating: 0 out of 5 stars0 ratings
Music For You
Me: Elton John Official Autobiography Rating: 4 out of 5 stars4/5Weird Scenes Inside The Canyon: Laurel Canyon, Covert Ops & The Dark Heart Of The Hippie Dream Rating: 5 out of 5 stars5/5Down the Rabbit Hole: Curious Adventures and Cautionary Tales of a Former Playboy Bunny Rating: 4 out of 5 stars4/5Music Theory For Dummies Rating: 4 out of 5 stars4/5The Meaning of Mariah Carey Rating: 5 out of 5 stars5/5Learn Guitar A Beginner's Course Rating: 4 out of 5 stars4/5The Easyway to Play Piano: A Beginner's Best Piano Primer Rating: 5 out of 5 stars5/5Dolly Parton, Songteller: My Life in Lyrics Rating: 4 out of 5 stars4/5IT'S ALL IN YOUR HEAD Rating: 5 out of 5 stars5/5The Circle of Fifths: Visual Tools for Musicians, #1 Rating: 5 out of 5 stars5/5Becoming a Great Sight-Reader–or Not! Learn From My Quest for Piano Sight-Reading Nirvana Rating: 4 out of 5 stars4/5Rememberings Rating: 4 out of 5 stars4/5Just Kids: An Autobiography Rating: 4 out of 5 stars4/588 Piano Classics for Beginners Rating: 4 out of 5 stars4/5Guitar For Dummies Rating: 4 out of 5 stars4/5Learn Jazz Piano: book 1 Rating: 4 out of 5 stars4/5Singing For Dummies Rating: 4 out of 5 stars4/5The Dirt: Confessions of the World's Most Notorious Rock Band Rating: 5 out of 5 stars5/5Can I Say: Living Large, Cheating Death, and Drums, Drums, Drums Rating: 4 out of 5 stars4/5Songwriting: Essential Guide to Lyric Form and Structure: Tools and Techniques for Writing Better Lyrics Rating: 4 out of 5 stars4/5Bowie: An Illustrated Life Rating: 4 out of 5 stars4/5Step By Step Mixing: How to Create Great Mixes Using Only 5 Plug-ins Rating: 5 out of 5 stars5/5Piano For Dummies Rating: 4 out of 5 stars4/5The Everything Songwriting Book: All You Need to Create and Market Hit Songs Rating: 5 out of 5 stars5/5Piano Chords Book Rating: 5 out of 5 stars5/5
Reviews for Recording Audio
0 ratings0 reviews
Book preview
Recording Audio - Barry R Hill
ONE
FROM MICROPHONE TO MP3
Let’s get you started and walk through a basic recording. Along the way we’ll discuss the equipment you need, procedures to follow, and how to make it sound good. You’ll then have a pretty solid understanding of what’s involved so you can move on to more complex projects.
Recording a track
Recording a source involves a microphone, an audio interface or microphone preamplifier, and a recording device. The goal is to select a mic that works well for that particular source, put it in a spot that sounds best, and get a solid recording signal into the recorder.
Equipment needed
Microphone
Mic stand
Mic cable
Audio interface or microphone preamplifier
Recorder
Headphones/monitors
Microphone
Probably the best general purpose mic to start with is a large-diaphragm condenser. Most microphones are designed either as a dynamic or condenser, which signifies how they operate internally. What this means to you for now is that condensers are brighter, more articulate, and can work on most anything. Dynamics are great for drums and other things, but maybe not so much for vocals, piano, acoustic guitar, etc. So, have your local music store help you find an inexpensive model; you can get these in the $100—$300 range (and, of course, way beyond that). Large-diaphragm mics have a larger capsule inside the screen, as opposed to what are commonly called pencil
condensers. The advantage is a broader frequency response, meaning it picks up lows and highs really well.
Check the microphone stand and make sure everything is tight—adjustable boom arms, the clutch where you raise and lower it, and the base. I’ve found many a stand where the boom was about to fall off with a mic on it, so be safe.
Don’t try screwing the microphone onto the stand—it’s too easy to drop it. Do it the other way by loosening the last boom arm segment, hold the mic firmly in one hand, and spin the boom into the mic clip. Don’t force it—make sure the threads are lined up properly. To adjust the stand height and angle, first loosen the knobs and tighten them when you’re done.
Point it in the right direction. Every mic has an on-axis point which should face the sound source you’re miking. Sometimes this is obvious, other times not so much. For example, long thin mics like the Shure SM57 and 58 are pointed with the end of the grill facing the source. Large diaphragm mics usually pick up from one side of the grill; look for the manufacturer’s nameplate or use your ears to make sure. When a sound is picked up away from the on-axis direction of the microphone, it will have an unnatural or distant sound quality, which generally doesn’t sound very good.
Where to place the mic? This depends on what we’re recording, but stay fairly close, maybe a foot or two away. If it’s a vocal (spoken word or singing), place it at the level of their mouth, perhaps a tad higher, and angled downward just a bit. Too close in front of the mouth and you’ll get puffs of air which cause problems. If you’re getting too many pops
, place a pop filter between the mic and the mouth. You can also move the mic over to the side a little so it’s not directly in front.
For acoustic guitars point the mic toward the 12th fret (count ‘em), which splits the difference between the neck (finger noise) and the hole (boominess). I’ve got lots of miking suggestions in the tracking and mic technique chapters.
Check the switches on the microphone. If your mic has switches, it will be one or more of the following:
Polar pattern select. You generally want the mic to pick up sounds from the front only, not from the back or sides. Set the polar pattern switch to the heart-shaped symbol; this represents a cardioid pattern and means the mic will pick up sounds mostly from the front.
Attenuation pad. This reduces incoming signal level in case your sound source is really loud and is overloading (distorting) the mic. Ever put your ear one inch away from a snare drum? For now, leave it off (0dB).
Low-cut filter. This attenuates (reduces) low frequency sounds such as rumble, vocal pops, and trucks driving by. All consoles and DAWs have low-cut filters, so we’d rather set these later while mixing. The symbol looks like a division sign; set the switch to the flat position.
Grab a mic cable and connect it to the mic, making sure you hear a click that indicates it’s locked in. Microphone cables have different connectors at each end. The male end with three pins gets plugged into the audio interface or microphone preamplifier (audio follows the direction of the pins). The other end has three holes and goes into the microphone. See the little switch on the connector? Make sure you push this when unplugging the cable. You don’t need to wrap the cable around the stand like a mummy. Just do a couple wraps around the stand so the cable doesn’t hang out and trip somebody. Once it reaches the floor, run the cable in a way that minimizes getting stepped on by people—this damages the tiny wires inside the cable, which is a bad thing.
Be careful:
Don’t leave a mic on the floor. You just might be the loser who steps on it.
Don’t connect, disconnect, or move microphones when the recording channel is on. It pops through the system, possibly damaging your speakers or headphones.
Room acoustics play a major role in what you’re getting in the mic. A plushly-furnished living room sounds much more subdued than a reverberant bathroom. Spoken word requires a tightly-controlled acoustic environment, so find a smaller room with lots of drapes, couches, bookshelves, or acoustic panels on the walls. Make sure there’s not a flat, unfurnished wall close to the person or microphone; this causes direct reflections back into the mic and sounds bad.
Music requires some room ambiance to give it life, so we’re generally seeking a balance. Uncontrolled reflections and too much reverberation cause issues such as muddiness and phasing, but a dead-sounding room is terrible. Recording studios should be designed with this in mind, treating walls and ceiling surfaces to control reflections without overly deadening the space. If you’re recording in your bedroom, office, or band room at school, experiment in different locations in the room, adjusting materials and furniture, and so on. More ideas and issues with acoustics are presented in the acoustics chapter.
Audio interface / preamplifier
Some microphones are designed with a USB output, rather than a standard cable connector. This is really handy as you can plug it directly into the computer. These don’t sound quite as good, though, but for average use they’ll work fine. All other recording mics have the 3-pin connector we described earlier, called an XLR. The signal output of these microphones is very low and requires a special amplifier to increase it so it’s compatible with a console or recorder. Microphone preamplifiers are found on each channel of a recording console or live mixer, some external flash recorders, and audio interfaces.
An audio interface is the bridge between microphones and computers. Plug the mic cable into the XLR input on the interface, then USB (or whatever) to the computer. This device handles the analog to digital conversion for recording, then reverses this when playing back through headphones or speakers connected to the interface’s monitor outputs. This is a fairly complex, crucial operation, and as such you generally get what you pay for. Cheap interfaces will sound, well, cheap, so as the budget allows consider investing in a quality interface.
Some audio interface units feature a single microphone input, some two, and so on. If you’re planning to record multiple tracks at the same time, such as for a band, you’ll need an interface with several mic inputs.
Typical settings on the interface to look for:
Headphone/monitor volume
Input level: sets incoming microphone level for recording. Leave this all the way down for now.
+48V: Phantom power on/off switch. This is required for condenser mics, so turn it on.
Pad: This switch will attenuate incoming signal, such as when the source itself is too loud for the input even when turned down all the way. Leave off for now.
Low-cut filter: Leave off and use the ones in your DAW or console.
Source/Mix balance control: Set to mix so we’re hearing only the output from the recorder.
Recorder
This could be a software DAW (digital audio workstation such as Pro Tools or Logic Pro), portable flash recorder, or a washing-machine size multitrack tape recorder from the 80s (awesome, by the way). Let’s assume a DAW, so open a new session and set as follows:
Bit rate: 24 bit
Sample rate: 44.1kHz
BWAV or WAV
In the audio settings menu find how to select the audio interface hardware you’re using. This will tell the DAW what inputs and outputs are available on the device as well as how to play back your tracks through monitors or headphones.
If it’s an empty session, create a new audio track. Set the track’s input to the audio interface channel where your mic is connected. For example, a stereo interface will have two mic inputs, so assign track #1 in the DAW to mic input #1.
Arm the track, meaning set it to prepare for recording; it should turn red somewhere. Have the person at the mic begin speaking or playing and gradually turn up the input level on the interface. The DAW track fader won’t have anything to do with recording level, so just leave it alone. Watch the meter on the track and set the input level so you have a healthy signal that peaks in the upper region, but well away from the very top. Hitting zero in digital, which is as far as it will go, will turn into instant hash as the system runs out of bits to encode the signal.
That’s it—press record and do a take. Keep an eye on the meter; musicians tend to get more excited during an actual take than when getting a level check. Don’t do any abrupt level changes, but if it’s peaking out you’ll have to do another take with a lower level (turn down the interface mic gain control).
If the artist wants another go at it, return the DAW transport to the beginning of the session and just hit record again. It’ll save each take you record; look for the clip list window to see everything that’s created in the session. One huge tip is to name each audio track as soon as you create it—not later during mixing. As you compile multiple takes and do editing on a track the clip list will automatically use that track name, which is hugely helpful in looking for the needle in the haystack of a large, complex session.
Processing the file
For now we’re going to assume a simple one-track recording that we now need to edit and mix into a final audio file. Here are the steps:
Editing
Signal processing
Bouncing/exporting a final file
Editing
In this case, editing should be as simple as getting rid of extra space at the beginning and end of the take. For album production, a single vocal track might be comprised of several takes, where the engineer selects portions of each take to build a final track. An entire chorus can be duplicated to replace another chorus that didn’t go so well. We’ll leave that for now and stick to our awesome one-track masterpiece.
Editing in a DAW generally doesn’t change the actual audio that was recorded; every edit, fade, or track positioning is stored by the software, describing what should happen when the final file is output. This provides nearly unlimited flexibility for experimenting and getting it just right.
Look at the beginning of the waveform and you’ll see blank space before the performance starts. Select the trimmer tool, hover near the left edge of the waveform, then click and drag over to the right until it’s close to the edge of where the audio starts. Now get the selector tool and highlight the remaining narrow region before the waveform; apply a short fade-in so you get a smooth start for the audio. Zoom in as necessary to make it easier to see and select audio.
Pro Tools users should get familiar with smart tools, which means as you hover the cursor around the waveform different tools will appear. This is an incredibly efficient way to work: hover near the edge and the trimmer tool is selected, top half of the waveform gets the selector tool, bottom half is the grabber tool, and near each top corner pops up a fade tool. To enable smart tools, click the bracket over the set of main tools in the top window.
Now trim the end of the audio and apply a smooth fade out. Make sure you’re not grabbing too much of the audio in the fade, unless it’s an intentional fade out for a song.
Signal processing
Recorded audio nearly always needs some type of processing to correct problems and/or make it sound better. We’ll dig into this much more in the music production section, but let’s try a few basic things for the track you just recorded.
Filter/EQ
I nearly always put a low-cut (high-pass) filter on a majority of tracks in a session. Filters attenuate (reduce) energy in a particular region. Most instruments and voices do not extend all the way down into the lower frequency ranges, which is where we find miscellaneous noise, rumble, drum leakage, and so on. Click on a track insert and select an EQ, such as the 7-band EQ that comes with Pro Tools. Turn on a low-cut filter and adjust the frequency up the scale until it begins to cut out the lower portion of the sound. Backtrack a tad and you’re set. The other control, slope, determines how abruptly it will chop off this frequency range. For now, set it for a moderately steep slope (12dB/oct).
Audio example 1: Low cut filter
The next step is to clean up the mud or cloudiness that’s common on acoustically recorded tracks. Find the low-mid band and turn it up 6dB or so. Sweep the frequency select control back and forth between 250 and 400Hz and listen for a spot that sounds more muddy or cloudy than the rest. It’ll all sound weird, and it’ll take lots of practice and listening to get a feel for it. Once you zero in on this, turn the level control down to -3, -6, or even more as necessary. Bypass the EQ and listen to the before and after; it should be clearer with the EQ turned on. This same approach can be used for an annoying ring, edgy guitar or trumpet, and so on.
There’s a third control on most EQs called bandwidth, or Q. This controls how wide of a region the EQ will change. Keep this fairly narrow for this step so it doesn’t pull out too much of the overall sound of the track.
Now that we have a clean, basic sound, let’s shape it a bit so it has more presence and sparkle. Grab the hi-mid control and boost it 3dB. Set the Q for a wide bandwidth and sweep around the 4k region. This is a good area for presence and intelligibility; don’t overdo it, so perhaps a couple dB is all that’s needed, depending on the source. Now try a very gentle boost with the high frequency control. Set it to shelving mode and sweep up around 8-10kHz. This applies a flat boost to the entire upper frequency range, providing more air
and openness. Lastly, try boosting the low-frequency control a couple dB around 100-250Hz. Exact frequency regions will depend on the source, so over time you’ll get a better feel for how to treat different instruments or voices.
Audio example 2: Finding EQ settings
All EQs generally do the same thing, but in different, often subtle, ways. Circuit design, components, and internal settings distinguish one from another, so experiment and try various EQ plugins on your track. Maybe it’ll all sound the same now, but over time you’ll get a sense of how each makes a unique impact.
Compression
Contrary to popular opinion, there’s no law that requires putting a compressor on every track. But, we generally like to compress audio because it can sound tighter, punchier, and fuller. Done wrong, though, it’ll dull the tone and crush the life out of a musical part. Along with improving the overall sound, compressors are useful for managing swings in dynamic range (soft to loud). A vocalist singing normally through the verse can go inexplicably insane on the chorus, making it difficult to fit into a mix.
Let’s accomplish both of these goals for our one-track project. Insert a compressor on the track and set the ratio to 3:1, fairly fast attack, and a medium release. Now play the track and adjust the threshold down until you see a few dB of gain reduction on the meter. Lowering the threshold will compress more of the track’s dynamic range whereas a high setting will only affect the peaks (louder portions). Once the threshold tells the compressor to start, the ratio determines how much it will reduce the output. So a 3:1 setting means that only 1dB will be output for every 3dB coming in. Want to crush a metal singer? Crank the ratio up to 9:1 and lower the threshold until he turns into indecipherable gibberish.
Audio example 3: Compression (light, then heavy)
As with EQs, compressors come in many flavors. Try each one in your DAW or rack and start getting a feel for how they react and sound differently.
Reverb
Now let’s give the track some ambiance, such as a musical club or small performance hall. But, unlike most novices who slap effects plugins on all their individual tracks, we’re going to set this up properly based on long-standing studio practice.
Click a send on the audio track and select any of the internal buses (1-2 is fine). Turn up the send fader to zero. Now create a new stereo aux track, which is different from an audio track. Set the source for this track to the same internal bus you routed the send to (bus 1-2). This brings a copy of the original audio over to the aux track; if you had several tracks, you could send all of them to the same aux track, thereby adding the same reverb sound to everything.
Insert a reverb plugin on the aux track and pick a preset such as small hall, plate, etc. Play the track and you’ll hear reverb; adjust the aux track fader level to balance the amount of reverb with the original track. It’s good practice to rename the buses as well, so instead of bus 1-2
it would be vocal reverb
. In Pro Tools this is done under the IO Setup menu.
Audio example 4: Reverb (dry, wet)
Final steps
Once you’ve got things sounding like you want, let’s get ready to export it to a new audio file. Create a stereo master fader track; drag it over to the right side if it shows up somewhere in the middle of your tracks. All individual tracks now feed this master bus, and you’ll see the overall signal level on its meter. This is crucial so that we can be sure the final mixed signal isn’t running too high and risking distortion. Play the track at the loudest point and see how high the meter goes; pull down the master fader a bit if necessary.
One last thing to try is inserting a bus compressor or peak limiter on the master fader. Bus compressors are set for gentle compression so as to pull things together a bit. Peak limiters are overused these days, but the idea is to take lower-level audio and increase it while maintaining a ceiling on the overall track. By squashing dynamic range into a smaller space the overall mix sounds much louder and perhaps fuller; overdo it and it sounds distorted and unmusical. For a spoken word podcast a peak limiter can increase intelligibility for listening in the car by keeping the overall volume more consistent.
Pro Tools comes with a peak limiter called Maxim; set the output level for -1dB and slowly decrease the threshold while playing the track. Listen as it gets louder, then progressively more nasty. Find a balance that works and you’re done.
Remember, everything you’ve done in the DAW so far only describes how the recorded audio is to be played back. All of the processing now needs to be finalized in a separate audio file. This is called bouncing, so go to the file export menu and set things as follows:
Bounce source: Main/Mon LR
File type: WAV
Format: Interleaved/stereo
Bit depth: 24
Sample rate: 44.1
The offline option is non-realtime, meaning it will render the file much quicker (a good thing). If you want an mp3 for sharing, check the box and it’ll create both file types. WAV files are higher quality as they are uncompressed, just like a CD. Mp3 files are lower in quality, but feature small file sizes. Set the mp3 option for 256kbit/s.
That’s it—you’ve produced a complete recording from microphone to mp3. All of these steps will come up again in the following chapters, but with more detailed information, options, and recommendations.
TWO
MIXDOWN: SETUP
The goal for mixing is to blend individual tracks from the multitrack recorder so they sound like they all played in the same room, at the same time. To do this we use faders (level balance), pan pots (left-right imaging), and signal processors (tone, levels, effects). Once you get it right, it’s saved as a stereo file or, if you’re lucky enough to have one, recorded on a 2-track tape recorder. First, let’s look at the overall signal flow involved in mixing, both for DAW-only systems (mixing on your laptop) and console-based studios.
Signal flow for mixdown
You’ll see the term signal flow a great deal in this book. Signal flow is fundamental to understanding how the gear and equipment operate and work together, even on a DAW. Where exactly is the signal flowing from your mic input to the recorder? Will changing an EQ setting affect the compressor? Will the musicians hear an EQ change in their headphones? Did you just lose signal somewhere? Understanding where everything goes from one point to the next is crucial for solving problems as well as coming up with creative ideas. We’ll cover lots of each throughout the book, but for now let’s give you a mental picture of how things flow for a mix.
Console mixing signal flow
Recording studios have either a multitrack recorder or DAW that’s connected to the console. We’ll treat both of these as the same thing for now—it’s simply the recorder playing back your tracks. The outputs of the multitrack are usually permanently connected by cables to the console input channels in numeric order (multitrack track #1 = console channel input #1). The individual signals flow down each console channel and are all routed to the mix bus fader, which is a combining amplifier that mixes all the individual tracks together. This is the final result that you’ll save as a mix file or record to an external 2-track recorder. Along the way you can apply signal processing such as EQ, compression, and reverb, either to individual channels or to the entire mix.
If you’re playing back from a DAW through the console, the computer has to first connect to a multichannel audio interface. This device converts the audio information to analog signals which are then fed individually to the console channel inputs.
DAW mixing signal flow
If you’re mixing on a DAW with no console, signal flow follows the same concepts. The main difference is that it’s all virtual—you don’t have to plug in any cables. Signals on individual tracks all go to the master mix bus (master fader in Pro Tools). You can add processing to a track or the entire mix. Your setup might include a control surface, which has physical faders and controls, but we’ll treat this just like a virtual DAW studio as it’s not the same as an actual recording console.
We’ll step through all of these operations in just a bit, including some creative ways of routing signals. For now, let’s jump in and start mixing. Grab some tracks somewhere, import them into your DAW, and get the coffee brewing.
Mixing on a console
Console channels
Turn up the fader for level
At the bottom of each channel, turn up the fader to around unity (indicated by U or zero). Unity is optimum signal gain through a circuit, so it’s a good starting point. This gives you room to move the fader up or down as you balance all your tracks.
Route to the mix bus
Now, either at the bottom or near the top of the channel you’ll see a group of numbered switches. This is the assignment matrix, used for routing incoming signals to some destination such as the mix bus or a track on your recorder. We need to send each channel’s signal to the mix bus, so push the button labeled mix, L-R, or something like it.
Label the channels
Run a strip of label tape across the bottom of the channels and write down the name of each track. This way it’s not just channel 5
, but rather kazoo
. Much more descriptive and helpful when you’re busy building the mix.
Master mix bus fader
On the right side of your console (or middle, depending on how large your board is), you’ll see the master section. In addition to the main mix bus fader, you’ll see controls for setting volume, selecting what you want to listen to in the room (mix bus, external 2-track, CD), selecting between different sets of speakers, and other functions. Turn the mix bus fader up to unity, which should be labeled zero and is usually all the way up. This is the final level control for everything in your mix and feeds your 2-track recorder. Keep an eye on the meters; you want them up near the top, but