Surgical Complications in Oral Implantology: Etiology, Prevention, and Management
()
About this ebook
Read more from Louie Al Faraje
Edition Oral Implantology Review: A Study Guide Rating: 0 out of 5 stars0 ratingsOral Implantology Review: A Study Guide, Second Edition Rating: 0 out of 5 stars0 ratings
Related to Surgical Complications in Oral Implantology
Related ebooks
Full-Arch Implant Rehabilitation Rating: 0 out of 5 stars0 ratingsImplant Therapy: Clinical Approaches and Evidence of Success, Second Edition Rating: 0 out of 5 stars0 ratingsCementation in Dental Implantology: An Evidence-Based Guide Rating: 0 out of 5 stars0 ratingsThe Osteoperiosteal Flap: A Simplified Approach to Alveolar Bone Reconstruction Rating: 4 out of 5 stars4/5Peri-Implant Complications: A Clinical Guide to Diagnosis and Treatment Rating: 0 out of 5 stars0 ratingsManagement of Complications in Oral and Maxillofacial Surgery Rating: 2 out of 5 stars2/5Complex Dental Implant Complications Rating: 0 out of 5 stars0 ratingsDental Implant Complications: Etiology, Prevention, and Treatment Rating: 5 out of 5 stars5/5Quick Reference to Dental Implant Surgery Rating: 0 out of 5 stars0 ratingsThe Scrub's Bible: How to Assist at Cataract and Corneal Surgery with a Primer on the Anatomy of the Human Eye and Self Assessment Rating: 0 out of 5 stars0 ratingsSupra-Gingival Minimally Invasive Dentistry: A Healthier Approach to Esthetic Restorations Rating: 5 out of 5 stars5/5Cubital Tunnel Syndrome: Diagnosis, Management and Rehabilitation Rating: 0 out of 5 stars0 ratingsAdvances in Periodontal Surgery: A Clinical Guide to Techniques and Interdisciplinary Approaches Rating: 0 out of 5 stars0 ratingsAtlas of Operative Oral and Maxillofacial Surgery Rating: 5 out of 5 stars5/5Contemporary Periodontal Surgery: An Illustrated Guide to the Art behind the Science Rating: 0 out of 5 stars0 ratingsCase Studies of Postoperative Complications after Digestive Surgery Rating: 0 out of 5 stars0 ratingsEndovascular Surgery and Devices Rating: 0 out of 5 stars0 ratingsClinical Maxillofacial Prosthetics Rating: 0 out of 5 stars0 ratingsVestibular Schwannoma Surgery: A Video Guide Rating: 0 out of 5 stars0 ratings6Ways to Design a Face: Corrective Jaw Surgery to Optimize Bite, Airway, and Facial Balance Rating: 0 out of 5 stars0 ratingsFundamentals of Implant Dentistry, Volume 1: Prosthodontic Principles Rating: 0 out of 5 stars0 ratingsThe Single-Tooth Implant:: A Minimally Invasive Approach for Anterior and Posterior Extraction Sockets Rating: 0 out of 5 stars0 ratingsManaging Endodontic Failure in Practice Rating: 4 out of 5 stars4/5Fundamentals of Implant Dentistry, Second Edition: Volume 1 Rating: 0 out of 5 stars0 ratingsAdvanced Zygomatic Implants: The ZAGA Concept Rating: 0 out of 5 stars0 ratingsQuintessence of Dental Technology 2024: Volume 46 Rating: 0 out of 5 stars0 ratingsKeys to Successful Orthotopic Bladder Substitution Rating: 0 out of 5 stars0 ratingsAdvances in Equine Upper Respiratory Surgery Rating: 0 out of 5 stars0 ratingsPeriodontal Root Coverage: An Evidence-Based Guide to Prognosis and Treatment Rating: 0 out of 5 stars0 ratingsManagement of Endodontic Complications: From Diagnosis to Prognosis Rating: 0 out of 5 stars0 ratings
Medical For You
The Lost Book of Simple Herbal Remedies: Discover over 100 herbal Medicine for all kinds of Ailment, Inspired By Dr. Barbara O'Neill Rating: 0 out of 5 stars0 ratingsMediterranean Diet Meal Prep Cookbook: Easy And Healthy Recipes You Can Meal Prep For The Week Rating: 5 out of 5 stars5/5Gut: The Inside Story of Our Body's Most Underrated Organ (Revised Edition) Rating: 4 out of 5 stars4/5The Emperor of All Maladies: A Biography of Cancer Rating: 5 out of 5 stars5/5The Little Book of Hygge: Danish Secrets to Happy Living Rating: 4 out of 5 stars4/5What Happened to You?: Conversations on Trauma, Resilience, and Healing Rating: 4 out of 5 stars4/5ATOMIC HABITS:: How to Disagree With Your Brain so You Can Break Bad Habits and End Negative Thinking Rating: 5 out of 5 stars5/5The Vagina Bible: The Vulva and the Vagina: Separating the Myth from the Medicine Rating: 5 out of 5 stars5/5Brain on Fire: My Month of Madness Rating: 4 out of 5 stars4/5"Cause Unknown": The Epidemic of Sudden Deaths in 2021 & 2022 Rating: 5 out of 5 stars5/5Peptide Protocols: Volume One Rating: 4 out of 5 stars4/5Adult ADHD: How to Succeed as a Hunter in a Farmer's World Rating: 4 out of 5 stars4/5Mating in Captivity: Unlocking Erotic Intelligence Rating: 4 out of 5 stars4/552 Prepper Projects: A Project a Week to Help You Prepare for the Unpredictable Rating: 5 out of 5 stars5/5The Diabetes Code: Prevent and Reverse Type 2 Diabetes Naturally Rating: 4 out of 5 stars4/5Extra Focus: The Quick Start Guide to Adult ADHD Rating: 5 out of 5 stars5/5The White Coat Investor: A Doctor's Guide to Personal Finance and Investing Rating: 4 out of 5 stars4/5Blitzed: Drugs in the Third Reich Rating: 4 out of 5 stars4/5The 40 Day Dopamine Fast Rating: 4 out of 5 stars4/5The Song of the Cell: An Exploration of Medicine and the New Human Rating: 4 out of 5 stars4/5Living Daily With Adult ADD or ADHD: 365 Tips o the Day Rating: 5 out of 5 stars5/5Tight Hip Twisted Core: The Key To Unresolved Pain Rating: 4 out of 5 stars4/5The People's Hospital: Hope and Peril in American Medicine Rating: 4 out of 5 stars4/5This Is How Your Marriage Ends: A Hopeful Approach to Saving Relationships Rating: 4 out of 5 stars4/5
Reviews for Surgical Complications in Oral Implantology
0 ratings0 reviews
Book preview
Surgical Complications in Oral Implantology - Louie Al-Faraje
PART 1
Identifying Preoperative Conditions That Could Lead to Complications
Complications
1 Inadequate or Excessive Vertical Restorative Space
2 Inadequate Horizontal Restorative Space
3 Limited Jaw Opening and Interarch Distance
4 Inadequate Alveolar Width for Optimal Buccolingual Positioning
5 Maxillary and Mandibular Tori
COMPLICATION 1
Inadequate or Excessive Vertical Restorative Space
Vertical restorative space, or crown-height space, is the distance from the crest of the residual alveolar ridge to the occlusal plane of a planned restoration or to the opposing dentition. The amount of this space will influence your choice of prosthesis, restorative material, and surgical technique; therefore, it should be carefully measured intraorally or on properly articulated diagnostic wax-ups or master casts before surgery.¹,²,³,⁴,⁵,⁶,⁷,⁸ Soft tissue thickness should also be assessed prior to surgery; thick soft tissue may yield greater vertical space than anticipated.
If the vertical restorative space is not considered until the implants have integrated and the patient is ready for restoration, the prosthetic outcome may be unacceptable. For example, the patient may require a different type of prosthesis than originally planned, need additional surgical procedures to correct the problem, or experience subsequent prosthetic failure, such as repeated porcelain or acrylic fracture.
Vertical space requirement for fixed restorations
Single-unit fixed restoration
In treatment planning a single-unit fixed restoration to replace a posterior tooth, the minimum vertical space needed for a cement-retained crown is 9 mm from the crestal bone to the occlusal plane of the opposing dentition or 6 mm from the soft tissue to the occlusal plane (Fig 1-1).
Components of the needed space are 3 mm cement, ceramic /metal substructure, and occlusal porcelain + 5 mm abutment height–1 mm abutment height typically below the soft tissue level + 2 mm peri-implant soft tissue = 9 mm. This space is reduced to 8 mm for a cement-retained prosthesis with a metal occlusal surface and 5 to 6 mm for a screw-retained prosthesis (Table 1-1). For an anterior crown, the space required is 1 to 2 mm greater to accommodate the longer abutment necessary for proper retention.
Ideally, the implant should be positioned 3 mm below the most apical point of the free gingival margin.⁹ Placement of the crown-abutment interface 1 mm below the most apical point of the free gingival margin will maintain the peri-implant biologic width (usually 2 mm).
Multi-unit fixed prosthesis
Space requirements for a multi-unit fixed prosthesis also vary by material. If the crown-height space is less than 15 mm, porcelain is the restorative material of choice rather than acrylic resin, which requires bulk for strength. If the space is 15 mm or greater, a hybrid prosthesis should be considered.
Vertical cantilever
Vertical cantilever, or the ratio of crown to implant, should be taken into consideration in the fabrication of a fixed implant-supported prosthesis.
e9780867155402_i0004.jpgFig 1-1 Vertical restorative space requirement for posterior single fixed cement-retained implant restoration with 3-mm-thick soft tissue.
Table 1-1 Minimum vertical space requirement (mm) from crestal bone to opposing dentition
e9780867155402_i0005.jpgVertical space requirement for removable restorations
The two types of removable implant prostheses are bar-retained and low-profile independent attachments (eg, ball and Locator [Zest] attachments).
Bar-retained overdenture
The bar-retained overdenture requires a minimum of 17 mm of crown-height space depending on the type of attachment used. The space is divided as follows: 3 mm bone to soft tissue + 1 mm soft tissue to bar (necessary for proper hygiene; Fig 1-2) + 5 mm bar height. The remaining 8 mm is the minimum required thickness for acrylic resin from the superior edge of the bar to the incisal edges of the denture teeth.
Ball- or Locator-retained overdenture
A ball- or Locator-retained overdenture requires a minimum of 14 mm crown-height space, or 3 to 4 mm less than that needed for a bar overdenture. The space is divided as follows: 3 mm bone to soft tissue + 2.5 to 3.5 mm abutment height + 8 mm acrylic resin thickness between the top of the ball Locator abutment and the incisal edges of the denture teeth (Fig 1-3).
e9780867155402_i0006.jpgFig 1-2 (a to c) Cast bar overdenture. A distance of 1 mm or more is maintained between the lower border of the bar and the soft tissues for adequate hygiene access.
Fig 1-3 (a to e) Ball-retained overdenture. These ball attachments have a higher profile than the Locator abutments, but this is acceptable in this scenario because there is adequate vertical restorative space.
e9780867155402_i0007.jpge9780867155402_i0008.jpgFig 1-4 (a) The ball abutment. (b) The ball abutment cap. (c) The low-profile Locator abutment.
Solutions for deficient vertical space
One or more of the following can be used to gain a satisfactory clinical result:
Removal of hard tissue (alveoloplasty).
Surgical removal of soft tissue.
Use of a different abutment type, which can result in a gain of 1 mm or more of available vertical dimension. The Locator abutment has a height of approximately 2 mm, whereas ball attachments are 4 to 6 mm in height (Fig 1-4). The Locator abutment thus offers an advantage in clinical situations with limited vertical space.
Selection of a different type of prosthesis, which can also result in a gain of 1 mm or more in available vertical height. As noted above, placement of a screw-retained rather than a cement-retained restoration or placement of a fixed instead of a removable prosthesis reduces space requirements considerably. In the presence of minimal bone resorption, fixed ceramic restorations will best accommodate limited interarch space; however, the cost of these prostheses is greater.
Incorporation of a metal framework into an implant-supported complete denture. This step is recommended to provide sufficient strength while reducing vertical space requirements by 2 mm or more.
Reduction of the amount of space between the framework and tissue to the minimum required. This can be accomplished in some cases without compromising hygiene access.
Use of an alloy with a relatively high elastic modulus, such as a type IV extra-hard high-noble alloy. This may allow the fabrication of a framework with reduced occlusogingival dimension without compromising strength. The recommended occlusogingival dimension for type IV extra-hard high-noble alloy is 3.5 mm, compared with 6 mm for low-gold high-palladium alloys.¹⁰
Orthodontic intrusion of teeth. This might be indicated if the vertical restorative space is compromised because of hypereruption of the opposing teeth.
Fabrication of a traditional (non-implant-supported) fixed or removable prosthesis. This might be preferred over implant treatment in some clinical situations.
Solutions for excessive vertical space
Excessive vertical restorative space leads to excessive vertical cantilever. Solutions to this problem include:
Use of surgical techniques to increase the height of the available bone, including block grafting, guided bone regeneration with barrier membrane or titanium mesh, or distraction osteogenesis
Placement of traditional (non–implant-supported) partial or complete removable dentures.
COMPLICATION 2
Inadequate Horizontal Restorative Space
A minimum amount of horizontal space must be maintained between implants or between implants and natural teeth to prevent unnecessary bone loss or compromised esthetics that can result from invading that space.
The horizontal restorative space refers to the mesiodistal distance between implants, between an implant and a natural tooth, and between natural teeth.
Implant-to-implant space requirement
The distance between two implants, or interimplant distance, should be a minimum of 3 mm. When this distance is maintained, vertical bone loss resulting from crestal bone remodeling during establishment of the biologic width at the implant-abutment interface will have a minimal lateral or horizontal component. In a study by Tarnow et al,¹¹ horizontal bone loss around implants at the crest was only 0.45 mm when the interimplant distance was greater than 3 mm and 1.04 mm when it was less than 3 mm.
The clinical significance of this phenomenon is that crestal bone loss increases the distance between the interproximal contact of the adjacent implant restorations and the crestal bone. This distance may determine whether the interdental papilla is present or absent, which has implications for both hygiene and esthetics.
It is important to note that for fixed-detachable, spark-erosion, and overdenture types of implant prostheses, the distance between implants can be less or much more than 3 mm; the 3-mm guideline applies primarily to the fixed partial denture–type of implant prosthesis.
Calculating ideal implant-to-implant space
There are three ways of calculating an ideal mesiodistal space between implants.
1. Width of implant crowns
The first formula, which is based on the width of the planned implant crowns, requires a diagnostic wax-up and is ideal for determining the space between implant centers (Fig 1-5):
e9780867155402_i0009.jpgFig 1-5 The distance between the centers of two adjacent implants (A) is calculated by adding B (width of crown 1 divided by 2) and C (width of crown 2 divided by 2).
e9780867155402_i0010.jpg2. Papillary fill of interproximal space
The second method is less accurate; however, in most cases the result is close to the ideal distance between implants, which will vary in proportion to the diameter of the implants used (Fig 1-6):
R1 + R2 + 3 mm (where R = implant radius)
This method is based on the fact that, as discussed above, the horizontal distance between implants influences the appearance of the papillae,¹² and a 3-mm interimplant distance most closely correlates with adequate papillary fill of the interproximal space.¹³
Fig 1-6 The distance between the centers of two adjacent implants (A) is calculated by adding 3 mm to the sum of implant 1 radius (R1) and implant 2 radius (R2).
e9780867155402_i0011.jpg3. Standard distance
The third method is to allow a standard distance of 7 to 8 mm between narrow platform and regular platform implants and 8 to 9 mm between two regular platform implants or one regular and one wide platform implant. These distances are acceptable for restoration with a fixed prosthesis (Fig 1-7).
Fig 1-7 Standard distance (center-to-center) between implants of different diameters and optimal distance (edge-to-edge) between implants and natural teeth. NP, narrow platform; RP, regular platform; WP, wide platform.
e9780867155402_i0012.jpgImplant-to–natural tooth space requirement
Calculating ideal implant-to–natural tooth space
There are two ways of calculating an ideal mesiodistal space between an implant and a natural tooth.
1. Width of implant crown
The first approach is similar to the first method described for calculating the mesiodistal space between implants, ie, it is based on the width of the planned implant crown (Fig 1-8):
e9780867155402_i0013.jpg2. Standard distance
The second method is to place the edge of the implant 1.5 to 2.0 mm away from the adjacent root surface.¹⁴ Therefore, the following formula can be used:
1 to 2 mm + R (where R = implant radius)
This distance will prevent vertical bone resorption at the adjacent tooth; moreover, if bone loss occurs around the implant, it will not affect the adjacent tooth and vice versa (see Fig 1-7).
e9780867155402_i0014.jpgFig 1-8 An optimal way of calculating the distance between an implant and a natural tooth. Distance A is half of the width of the future implant crown.
Case examples
Figure 1-9 illustrates a case of incorrect implant positioning. An implant to replace the missing mandibular right first molar was placed 3 to 4 mm distal to the mandibular right second premolar so as to avoid damaging the premolar’s distally inclined root. As a result, the prosthesis has a large and biomechanically undesirable mesial cantilever. The proper course of action in this case would have been to adjust the root position of the second premolar by orthodontic intervention before implant placement. Figure 1-10 shows a case with ideal implant-tooth and interimplant distances.
e9780867155402_i0015.jpgFig 1-9 (a to d) The distance between the second premolar and the mesial implant is greater than ideal to avoid the inclined root. The result was an undesirable mesial cantilever of the implant prosthesis, which could have been avoided if the inclined root had been straightened using orthodontic treatment before implant placement.
Fig 1-10 (a to d) Clinical case with optimal distance of 3 mm between implants (edge-to-edge) and 2 mm between implants and natural teeth (edge-to-edge).
e9780867155402_i0016.jpgTooth-to-tooth space requirement
Anterior teeth
The minimum mesiodistal space required for treating loss of a single tooth in the anterior area with a dental implant is the implant diameter + 1.5 mm to the adjacent root on either side (ie, 3 mm). For example, a minimum distance of 6.5 mm is required for a 3.5-mm narrow platform implant, 7.5 mm if the implant diameter is 4.5 mm, and 8.5 mm if the implant diameter is 5.5 mm (Fig 1-11).
It is important to note that the distance of implant diameter + 3 mm is adequate for osseointegration but not necessarily ideal esthetically. Because the abutment diameter is usually wider than the diameter of the implant, 1 mm or more additional space is preferable for a more esthetic emergence profile of the implant crown. Alternatively, a smaller-diameter implant can be used.
e9780867155402_i0017.jpgFig 1-11 The minimum recommended distance for implant placement between two teeth is the diameter of the planned implant + 3 mm.
Posterior teeth
As in the anterior area, the mesiodistal distance of implant diameter + 3 mm between two natural posterior teeth is acceptable for placement of an implant. However, in the posterior region, there is often a problem of too much rather than not enough space. Although the natural molar is multirooted, it should be replaced by only a single implant. The placement of two implants to replace one missing molar is not recommended because it is surgically challenging, difficult to restore, and esthetically unacceptable to most patients. Moreover, the prosthesis must be configured such that an opening can be maintained between the implants for hygiene purposes, creating a so-called tunneled molar. Figure 1-12 demonstrates such a case.
If the alveolar ridge is wide (> 7 mm), a 5- or 6-mm-diameter implant should be used to replace one molar. Otherwise, one of the methods described below can be used for space management.
e9780867155402_i0018.jpgFig 1-12 (a to d) Restoration of a missing mandibular molar using two implants. Note that space is maintained between the two implants for hygiene access under the prosthesis.
Management of horizontal restorative space problems
Orthodontic treatment
If the edentulous area is not ideal for implant placement because of space concerns, orthodontic treatment can be initiated to increase or decrease the edentulous area. This may be especially helpful when space is excessive. Without such treatment, the restoration may be substantially wider than the diameter of the implant. The resulting torque, or moment of force, on the implant will increase as a factor of the magnitude and off-axis distance of occlusal forces applied (torque = force × distance; Fig 1-13), which has negative implications for the long-term outcome of the implant.
Enameloplasty
If only a small gain is needed in the mesiodistal dimension, enameloplasty may be adequate.
Smaller-diameter implants
Selective use of implants with a smaller diameter at the implant-abutment interface may be beneficial in some scenarios. Figure 1-14 shows replacement of a molar using a smaller-diameter (3.5-mm) implant, which is acceptable if the occlusal table on the crown is also small.
e9780867155402_i0019.jpgFig 1-13 Chewing forces applied at a distance (d) from the long axis of an implant will increase the moment of force applied onto the implant and cause bending in all directions.
e9780867155402_i0020.jpgFig 1-14 (a to e) Replacement of a missing first molar with a smaller-diameter (3.5-mm) implant. This is acceptable because the mesiodistal distance between the second premolar and the second molar is reduced as a result of mesial shifting of the second molar. Therefore, the occlusal table of the implant prosthesis can be considerably smaller than that of a normal-sized molar.
Narrow-diameter implants
For more substantial space deficiencies, narrow-diameter (1.8- to 3.0-mm) one- or two-piece implants have been used successfully for compromised horizontal restorative spaces for many years and are well documented in the literature¹⁵,¹⁶,¹⁷ (Fig 1-15). However, it is crucial to carefully assess biomechanical risk factors before using narrow-diameter implants.
Features
A reduced diameter at the neck of these implants makes it possible to conserve crucial millimeters of space when horizontal intertooth restorative space is compromised.
A one-piece design eliminates the microgap between implant platform and abutment found in two-piece implants. Less crestal bone loss is observed around one-piece implants over time.
Indications
For the last 10 years, applications for narrow-diameter implants have included:
Stabilization of full-arch dentures
Single tooth replacement in compromised intertooth space situations
Single tooth replacement in compromised interroot space situations
Orthodontic anchorage
Minimally invasive surgery as indicated
Fig 1-15 (a to f) A narrow (< 6-mm) lateral incisor space was restored using a narrow-diameter (3-mm) implant. This allowed sufficient space on each side of the implant for the papillae.
e9780867155402_i0021.jpgCOMPLICATION 3
Limited Jaw Opening and Interarch Distance
Limited jaw opening
The patient’s ability to open should be assessed before the intraoral examination begins. Normal opening is 40 mm from maxillary to mandibular incisal edge.¹⁸
If mouth opening is less than 40 mm, the implant surgeon may encounter difficulty when placing implants in the posterior region of the mouth. A specially designed ruler (Fig 1-16) can be used for this purpose.
Placement of implants in the posterior region when mouth opening is limited can result in excessively angulated implants. Figure 1-17 illustrates such a case. The distal implant could not be restored and therefore was left submerged and not put into function.
e9780867155402_i0022.jpgFig 1-16 A specially designed ruler is used to assess mouth opening for implant placement in the posterior region.
e9780867155402_i0023.jpgFig 1-17 (a and b) As a result of limited mouth opening, the implants were placed with incorrect angulation. The distal implant could not be properly restored from a biomechanical perspective and was therefore submerged.
Interarch distance
Hypererupted opposing teeth could interfere with implant placement even if jaw opening is adequate. In such a scenario, the occlusal plane of the hypererupted teeth should be corrected by enameloplasty or orthodontic intrusion. Furthermore, excessive coronal height of a tooth adjacent to the edentulous area may require the use of a drill extension; however, the patient’s limited opening may interfere with use of the extension. When it is not possible to use implant handpieces to place implants in the correct position and angulation, implant placement is contraindicated.
COMPLICATION 4
Inadequate Alveolar Width for Optimal Buccolingual Positioning
Posterior ridge deficiency
As previously noted, endosseous root-form implants distribute occlusal loads best when the forces are applied along the long axis of the implant body. When implants are placed in the posterior region, the center of the implant (during surgery, the pilot hole) should correspond to the central fossa of the planned implant restoration. This is easy to achieve if the implants are being placed in an immediate extraction site or in edentulous areas where minimal resorption has taken place (ie, recent extraction sites). Figure 1-18 illustrates a case of immediate implant placement. The alveolar ridge exhibited no buccolingual resorption at the time of implant placement, allowing the implant to be placed in an ideal position. When the implant body is located under the central fossa of the planned restoration, the occlusion can also be ideal, with the buccal cusp of the implant restoration overlapping the buccal cusps of the mandibular teeth.
e9780867155402_i0024.jpgFig 1-18 (a to d) The implant was placed immediately following tooth extraction in an optimal buccolingual position because there was adequate width of the alveolar ridge. The result is an implant prosthesis with ideal occlusion (ie, its buccal cusp overlaps the opposing mandibular buccal cusp).
In resorbed alveolar ridges where buccolingual bone loss compromises correct implant positioning, attaining axial loading requires the implant to be positioned lingually or palatally unless a bone augmentation procedure is performed. If no bone grafting procedure is to be performed to augment the width of the alveolar ridge, implants should be centered buccolingually in available bone and the restoration placed in either a cusp-to-cusp or reverse articulation (Fig 1-19), depending on the severity of the bone loss. Such positioning of the restoration will prevent buccal cantilever forces on the implant and minimize consequent damage to the implant from offset occlusal load forces. Figure 1-20 shows a patient with severe resorption in the posterior right quadrant of the maxilla. The patient declined veneer block bone grafting to augment the width of the alveolar ridge. The wax-up shows that reverse articulation is necessary if axial loading is to be maintained on the implants. A sinus elevation bone graft was performed with delayed implant placement, and clinical photos show the definitive prosthesis in reverse articulation.
e9780867155402_i0025.jpgFig 1-19 The implant should always be centered buccolingually in the available alveolar ridge unless a simultaneous bone grafting procedure is to be performed to increase alveolar width. However, the location of the implant prosthesis should be modified so that buccal cantilever of the implant prosthesis is avoided and occlusal forces are directed along the long axis of the implant. Therefore, depending on the location of the implant relative to the opposing dentition, the restoration may be in ideal occlusion (a), cusp-to-cusp contact (b), or even in reverse articulation (c).
e9780867155402_i0026.jpgFig 1-20 (a to g) A patient with compromised alveolar ridge width. The patient accepted sinus elevation treatment but declined veneer block augmentation to increase the width of the alveolar ridge. The result is the placement of implants in the middle of the available alveolar ridge with the implant prosthesis in a crossbite position to eliminate the buccal extension (cantilever) on the implant crowns.
Anterior ridge deficiency
Unlike buccolingual positioning in the posterior region (where the implant is placed under the central fossa of the planned restoration), the position of the implant in the anterior region depends on the type of prosthesis to be fabricated: screw-retained or cement-retained (Fig 1-21).
If the definitive restoration is to be cement-retained, the implant should be centered (and its pilot hole drilled) under the incisal edge of the planned implant crown. This is because the cement-retained abutment must be large enough to gain adequate retention. Centering the implant under the cingulum will make the cement-retained crown very bulky. However, the opposite is true if a screw-retained prosthesis is planned; that is, the implant should be centered under the cingulum of the planned crown. This is because the access hole for the abutment screw should not compromise esthetics. Cement-retained versus screw-retained implant prostheses are discussed further in complication 39 (see part 3).
e9780867155402_i0027.jpgFig 1-21 (a) In the anterior region, the buccolingual position of the implant depends on the type of prosthesis planned. For a screw-retained implant prosthesis, the position of the center of the implant is under the cingulum of the future crown (to provide for screw access without compromising esthetics); however, for a cement-retained prosthesis, the center of the implant is located under the incisal edge of the future crown. (b) The latter situation is better from a biomechanical point of view because the chewing forces are directed at the incisal edges and therefore will be along the long axis of the implant.
Figure 1-22 shows ideal buccolingual positioning of an anterior implant with a cement-retained restoration. Figure 1-23 shows ideal buccolingual positioning of a screw-retained prosthesis. A case of incorrect positioning toward the buccal aspect, which led to gingival recession and compromised esthetics, is shown in Fig 1-24.
e9780867155402_i0028.jpgFig 1-22 (a to e) Ideal buccolingual position of an anterior implant with a cement-retained prosthesis. The center of the implant is under the incisal edge of the implant crown.
e9780867155402_i0029.jpgFig 1-23 (a to d) Ideal buccolingual position of an anterior implant with a screw-retained prosthesis. The center of the implant is under the cingulum of the implant crown.
Fig 1-24 Excessive buccal positioning of an implant led to gingival recession and compromised esthetics.
e9780867155402_i0030.jpgTreatment of alveolar ridge width deficiency
Bone grafting procedures can be used for augmentation of the width of a deficient alveolar ridge. Some of the most common procedures are:
Guided bone regeneration with simultaneous or delayed implant placement (Fig 1-25)
Alveolar ridge expansion with simultaneous or delayed implant placement (Fig 1-26)
Block grafting with delayed implant placement (Fig 1-27)
e9780867155402_i0031.jpgFig 1-25 (a to g) A guided bone regeneration procedure is performed using particulate bone graft material and resorbable membrane to increase the width of the alveolar ridge for proper buccolingual implant positioning.
e9780867155402_i0032.jpgFig 1-26 (a to f) Alveolar ridge expansion using the split-ridge technique is performed simultaneously with implant placement to increase the width of the alveolar ridge.
e9780867155402_i0033.jpgFig 1-27 (a to f) A block grafting technique is used to increase the width of the alveolar ridge.
COMPLICATION 5
Maxillary and Mandibular Tori
Maxillary tori
A maxillary torus is a mass of dense cortical bone that is typically located at the midline of the palate. Indications for removal include (1) interference with a conventional or implant-supported denture, (2) speech impediment, (3) repeated trauma to the overlying mucosa during mastication, and (4) malignancy phobia of the patient.¹⁹ Before removal, the maxillary torus should be examined by computed tomography scan to rule out the possibility of pneumatization, in which the nasal cavity extends into the torus itself.²⁰
Technique for removal
For dentate patients, an impression is taken prior to surgery and a cast poured. The torus is removed from the cast, and a clear acrylic stent is made. Use of the stent postoperatively will assist in preventing hematoma formation and protecting the wound from irritation by food. However, if the patient wears a full or partial denture, the prosthesis can be relined with soft tissue conditioner after surgery and used as the stent (Fig 1-28).
Anesthesia can be accomplished with bilateral greater palatine and incisive nerve blocks.
A Y or double-Y incision is made, and a full-thickness flap is reflected to expose the torus²¹ (see Figs 1-28b and 1-28c).
After the entire torus is fully exposed, a large round diamond bur with copious irrigation is the suggested method for removal (see Fig 1-28d).
Once the torus has been completely removed (see Fig 1-28e), the