Burstone's Biomechanical Foundation of Clinical Orthodontics: Second Edition
()
About this ebook
Related to Burstone's Biomechanical Foundation of Clinical Orthodontics
Related ebooks
The Biomechanical Foundation of Clinical Orthodontics Rating: 0 out of 5 stars0 ratingsKratochvil's Fundamentals of Removable Partial Dentures Rating: 0 out of 5 stars0 ratingsZero Bone Loss Concepts Rating: 0 out of 5 stars0 ratingsFundamentals of Implant Dentistry, Second Edition: Volume 1 Rating: 0 out of 5 stars0 ratingsBone Histology of Fossil Tetrapods: Advancing Methods, Analysis, and Interpretation Rating: 5 out of 5 stars5/5Advanced Techniques of Endoscopic Lumbar Spine Surgery Rating: 0 out of 5 stars0 ratingsPresenting Science Concisely Rating: 0 out of 5 stars0 ratingsThe Art and Science of Thread Lifting: Based on Pinch Anatomy Rating: 0 out of 5 stars0 ratingsPractical Biomechanics for the Podiatrist: Book 1 Rating: 0 out of 5 stars0 ratingsZoom Gastroscopy: Magnifying Endoscopy in the Stomach Rating: 0 out of 5 stars0 ratingsPathomechanics of Common Foot Disorders Rating: 0 out of 5 stars0 ratingsOral Structure & Biology Rating: 0 out of 5 stars0 ratings20 Years of Guided Bone Regeneration in Implant Dentistry: Second Edition Rating: 0 out of 5 stars0 ratingsRobotic Surgery of the Head and Neck: A Comprehensive Guide Rating: 0 out of 5 stars0 ratingsAdvanced CBCT for Endodontics: Technical Considerations, Perception, and Decision-Making Rating: 0 out of 5 stars0 ratingsPedographs and Gait Analysis: Clinical Pearls and Case Studies Rating: 0 out of 5 stars0 ratingsTechniques for Success With Implants in the Esthetic Zone Rating: 0 out of 5 stars0 ratingsClear Aligner Technique Rating: 0 out of 5 stars0 ratingsFundamentals of Fixed Prosthodontics: Fourth Edition Rating: 0 out of 5 stars0 ratingsFundamentals of Implant Dentistry, Volume 1: Prosthodontic Principles Rating: 0 out of 5 stars0 ratingsArthroscopic Transosseous Rotator Cuff Repair: Tips and Tricks Rating: 0 out of 5 stars0 ratingsA Radiologically-Guided Approach to Musculoskeletal Anatomy Rating: 0 out of 5 stars0 ratingsImplant Prosthodontics: Protocols and Techniques for Fixed Implant Restorations Rating: 0 out of 5 stars0 ratingsCorporate Spine: How Spine Surgery Went Off Track and How We Put It Right Rating: 0 out of 5 stars0 ratingsPractical Applications in Dental Occlusion: Analog to Digital Rating: 0 out of 5 stars0 ratingsOrthopaedic Management in Cerebral Palsy, 2nd Edition Rating: 3 out of 5 stars3/5Healthcare Simulation Research: A Practical Guide Rating: 0 out of 5 stars0 ratingsOcclusal Splints for Painful Craniomandibular Dysfunction Rating: 0 out of 5 stars0 ratingsCritical Thinking: Understanding and Evaluating Dental Research, Third Edition Rating: 5 out of 5 stars5/5
Medical For You
The Lost Book of Simple Herbal Remedies: Discover over 100 herbal Medicine for all kinds of Ailment, Inspired By Dr. Barbara O'Neill Rating: 0 out of 5 stars0 ratingsMediterranean Diet Meal Prep Cookbook: Easy And Healthy Recipes You Can Meal Prep For The Week Rating: 5 out of 5 stars5/5Gut: The Inside Story of Our Body's Most Underrated Organ (Revised Edition) Rating: 4 out of 5 stars4/5The Emperor of All Maladies: A Biography of Cancer Rating: 5 out of 5 stars5/5The Little Book of Hygge: Danish Secrets to Happy Living Rating: 4 out of 5 stars4/5What Happened to You?: Conversations on Trauma, Resilience, and Healing Rating: 4 out of 5 stars4/5ATOMIC HABITS:: How to Disagree With Your Brain so You Can Break Bad Habits and End Negative Thinking Rating: 5 out of 5 stars5/5The Vagina Bible: The Vulva and the Vagina: Separating the Myth from the Medicine Rating: 5 out of 5 stars5/5Brain on Fire: My Month of Madness Rating: 4 out of 5 stars4/5"Cause Unknown": The Epidemic of Sudden Deaths in 2021 & 2022 Rating: 5 out of 5 stars5/5Peptide Protocols: Volume One Rating: 4 out of 5 stars4/5Adult ADHD: How to Succeed as a Hunter in a Farmer's World Rating: 4 out of 5 stars4/5Mating in Captivity: Unlocking Erotic Intelligence Rating: 4 out of 5 stars4/552 Prepper Projects: A Project a Week to Help You Prepare for the Unpredictable Rating: 5 out of 5 stars5/5The Diabetes Code: Prevent and Reverse Type 2 Diabetes Naturally Rating: 4 out of 5 stars4/5Extra Focus: The Quick Start Guide to Adult ADHD Rating: 5 out of 5 stars5/5The White Coat Investor: A Doctor's Guide to Personal Finance and Investing Rating: 4 out of 5 stars4/5Blitzed: Drugs in the Third Reich Rating: 4 out of 5 stars4/5The 40 Day Dopamine Fast Rating: 4 out of 5 stars4/5The Song of the Cell: An Exploration of Medicine and the New Human Rating: 4 out of 5 stars4/5Living Daily With Adult ADD or ADHD: 365 Tips o the Day Rating: 5 out of 5 stars5/5Tight Hip Twisted Core: The Key To Unresolved Pain Rating: 4 out of 5 stars4/5The People's Hospital: Hope and Peril in American Medicine Rating: 4 out of 5 stars4/5This Is How Your Marriage Ends: A Hopeful Approach to Saving Relationships Rating: 4 out of 5 stars4/5
Reviews for Burstone's Biomechanical Foundation of Clinical Orthodontics
0 ratings0 reviews
Book preview
Burstone's Biomechanical Foundation of Clinical Orthodontics - Kwangchul Choy
1
Why We Need Biomechanics
Don’t believe blindly in experience, but believe in theory, and think creatively.
—Charles J. Burstone
Dentofacial changes are primarily achieved by the orthodontist applying forces to teeth, the periodontium, and bone. Hence, the scientific basis of orthodontics is physics and Newtonian mechanics applied to a biologic system. The modern clinician can no longer practice or learn orthodontics as a trade or a technique. The orthodontist must understand forces and how to manipulate them to optimize active tooth movement and anchorage. Communication with fellow clinicians and other colleagues in other fields requires a common scientific terminology and not a narrow jargon.
There is no such thing as a unique orthodontics physics
divorced from the rest of the scientific community. New appliances and treatment modalities will need a sound biomechanical foundation for their development and most efficient use.
Every profession has its trade tools. The carpenter uses a hammer and a saw. The medical doctor may prescribe medication and is therefore a student of proper drug selection and dosage. Traditionally, the orthodontist is identified with brackets, wires, and other appliances. Such hardware is only a means to an end point: tooth alignment, bone remodeling, and growth modification. The orthodontist achieves these goals by manipulating forces. This force control within dentofacial orthopedics is analogous to the doctor’s dosages. An orthodontic dosage
includes such quantities as force magnitude, force direction, point of force application (moment-to-force ratios), and force continuity.
Historically, because the end point for treatment is the proper force system, one might expect the development and usage of orthodontic appliances to be based on concepts and principles from physics and engineering. On the contrary, however, most appliances have been developed empirically and by trial and error. For that reason, treatment may not be efficient. Many times undesirable side effects are produced. If appliances work,
at a basic minimum the forces must be correct, which is independent of the appliance, wires, or brackets. Conversely, when bad things happen, there is a good possibility that the force system is incorrect.
These empirically developed appliances rarely discuss or consider forces. Forces are not measured or included in the treatment plan. How is it possible to use such mechanisms for individualized treatment? The answer is that they are shape driven rather than force driven. Different shapes and configurations are taught and used to produce the desired tooth movement. This approach is not unreasonable because controlled shapes can lead to defined wire deflections that relate to the produced forces. Unfortunately, there is so much anatomical variation among different patients that using a standard shape for a bracket or a wire or even modifying that shape will not always produce the desired results predictably.
An example of a shape-driven orthodontic appliance is what E. H. Angle called the ideal arch. In a typical application of this ideal arch, an archwire is formed with a shape so that if crooked teeth (brackets) are tied into the arch, the deflected wire will return to its original shape and will correctly align the teeth. Today, wires have been improved to deflect greater distances without permanent deformation, and brackets may have compensations to correct anatomical variation in crown morphology. The principle is the same as Angle’s ideal arch, but this approach is now called straight wire. Straight-wire appliances can efficiently align teeth but can also lead to adverse effects in other situations. The final tooth alignment may be correct, but the occlusal plane may be canted or the arch widths disturbed. Intermediate secondary malocclusions can also occur. An understanding of biomechanical principles can improve orthodontic treatment even with shape-driven appliances by identifying possible undesirable side effects before any hardware is placed. Aligners also use the shape-driven principle of an ideal shape.
All orthodontic treatment modalities, including different brackets, wires, and techniques, can be improved by applying sound biomechanics, yet much of clinical orthodontics today is delivered without consideration of forces or force systems. This suggests that many clinicians believe that a fundamental knowledge and application of biomechanics has little relevance for daily patient care.
Scientific Biomechanics
There are many principles and definitions used in physics that are universally accepted by the scientific community. At one extreme, there is classical physics—concepts developed by giants like Newton, Galileo, and Hooke. There are also other scientific disciplines, such as quantum mechanics. What the author finds disturbing is the hubris of what is called pseudo-biomechanics—new physical principles developed by orthodontists that are separate and at odds with classical mechanics. Orthodontists’ journal articles and lecture presentations are filled with figures and calculations that do not follow the principles of classical mechanics. Orthodontists may be intelligent, but we should not think we can compete with the likes of Newton.
There is another major advantage in adopting scientific or classical mechanics. The methodology, terminology, and guiding principles allow us to communicate with our scientific colleagues and set the stage for collaborative research. Imprecise words can confuse. We speak of power arms,
but power has a different meaning to an engineer than it does to a politician or a clinician. Force diagrams in orthodontic journals are difficult to decipher and may not be in equilibrium. The concepts, symbols, and terminology presented in this book are not trade jargon but will be widely recognized in all scientific disciplines.
Note that the theme of this book is orthodontic biomechanics. The bio
implies the union of biologic concepts with scientific mechanics principles. Let us now consider some specific reasons why the modern orthodontist needs a solid background in biomechanics and the practical ways in which this background will enhance treatment efficacy.
Optimization of Tooth Movement and Anchorage
The application of correct forces and moments is necessary for full control during tooth movement, influencing the rates of movement, potential tissue damage, and pain response. Furthermore, different axes of rotation are required that are determined by moment-to-force ratios applied at the bracket. For example, if an incisor is to be tipped lingually around an axis of rotation near the center of the root, a lingual force is applied at the bracket. If the axis of rotation is at the incisor apex, the force system must change. A lingual force and lingual root torque with a proper ratio must then be applied. These biomechanical principles are relevant to all orthodontic therapy and appliances—headgears, functional appliances, sliding mechanics, loops, continuous arches, segments, and maxillomandibular elastics (also sometimes referred to as intermaxillary elastics). The hardware is only the means to produce the desired force system.
Equally important as active tooth movement is the control over other teeth so that they do not exhibit undesirable movements. This is usually referred to as anchorage and depends in part on optimally combining and selecting forces. Some orthodontists might think that anchorage is determined by factors independent of forces. For instance, the idea that more teeth means greater anchorage is very limiting. Working with forces can be more effective in enhancing anchorage, such as in pitting tipping movement against translation. All archwires produce multiple effects. Many of these effects are undesirable, which should also be considered anchorage loss. In a sense, a new malocclusion is created, resulting in an increased treatment time. Let us assume that translation of teeth could be accomplished at the rate of 1 mm per month. In a typical orthodontic patient, rarely does tooth movement exceed 5 mm. Not considering any waiting for growth, total treatment time should be no longer than 5 months. So why is treatment longer? Usually, more time is required to correct side effects. The use of temporary anchorage devices (TADs) may eliminate side effects. A good biomechanical understanding is required to successfully use TADs; otherwise, adverse effects can still occur.
Selecting or Designing a New Appliance
New appliances and variations of older existing appliances are continually presented in journal articles or at meetings. What is the best way to evaluate these appliances? One approach is to try them in your clinical practice. This evaluation will be quite limited because there is a lot of variation in a small sample of malocclusions. Moreover, it is time-consuming and unfair to the patient. Because treatment is so long term, it may take many years to arrive at a conclusion on the efficacy of a new appliance. A better approach would be an evaluation based on sound and fundamental biomechanical principles. Drawing some force diagrams is much easier than protracted treatment. This is particularly valid when considering that most new appliances and techniques do not stand the test of time.
Orthodontists have always been very creative. Not all great research has come from university research laboratories. Whether in their own offices or on typodonts in the lab, clinicians have made significant achievements in bracket design, various wire configurations, and treatment sequences (techniques). It is much more efficient to work with a pencil and a sheet of paper (or a computer) than it is to go through the demanding trial and error approach. The best appliances of the future will require rigorous engineering and sound biomechanical methodology.
Let us assume for now that we have selected the best appliance for our individual patient. There are still many variables that require a sound biomechanical decision. For example, what size wire should we use? A 0.014-inch nickel-titanium (Ni-Ti) superelastic wire is not the same as a 0.014-inch Nitinol wire. The choice between a 0.016- and a 0.018-inch stainless steel (SS) archwire is significant. The larger wire gives almost twice the force.
Research and Evaluation of Treatment Results
The clinician can be surprised at the progress of a patient. When the patient arrives for an appointment, mysterious changes are sometimes observed. Why is there now an open bite or a new reverse articulation (also referred to as crossbite), or why is the malocclusion not improving? These unexpected events may be attributed to biologic variation. Or it may be the wrong appliance (or manufacturer). In reality, most of the clinical problems that develop can be explained by deviation from sound biomechanical principles. Thus, an understanding of applied biomechanics allows the orthodontist to determine both why a puzzling and problematic treatment change occurred and also what to do to correct it. Sometimes the force system is almost totally incorrect; other times, a small alteration of the force system can produce a dramatic improvement.
The prediction of treatment outcomes requires precise control and understanding of the applied force system as well as the usual cephalometric and statistical techniques. Good clinical research must control all of the known variables if the efficacy of one appliance is to be compared to another. Let us consider a study that is designed to compare the different outcomes between a functional appliance and an occipital headgear. It is insufficient to simply specify headgear or even occipital headgear. Headgears can significantly vary not only in force magnitude but also in direction and point of force application. It is little wonder that some research studies lead to ambiguous and confusing conclusions.
A biomechanical approach to clinical studies opens up new avenues for research to help predict patient outcomes. The relationship between forces and tooth movement and orthopedics requires more thorough investigation. Relationships to be studied include force magnitudes, force constancy, moment-to-force ratios at the bracket, and stress-strain in bone and the periodontal ligament.
Force systems and dosage
determine not only tooth or bone displacement with its accompanying remodeling; unwanted pathologic changes involving tissue destruction can also occur. Root resorption, alveolar bone loss, and pain are common undesirable events during treatment. Some histologic and molecular studies suggest a relationship between force or stress and tissue destruction. Although other variables may be involved, a promising direction for research is between stress-strain and the mechanisms of unwanted tissue changes. To control pain and deleterious tissue destruction, it is likely that future research will validate that dosage
does count.
How Scientific Terminology Helps
As previously discussed, orthodontic appliances work by the delivery of force systems. In this book, the methods and terminology of the field of physics are adopted. Tooth movement is only part of a subset of a broader field of physics. This allows orthodontic scientists and clinicians to communicate with the full scientific community outside of dentistry, setting the stage for collaborative research. Many of the specialized orthodontic terms produce a jargon that is imprecise and certainly unintelligible to individuals in other disciplines. The orthodontist speaks of torque.
Sometimes it means a moment (eg, the force system). At other times, however, it means tooth inclination (eg, the maxillary incisor needs more torque
). Imprecision leads to faulty appliance use, which will be discussed later.
A universal biomechanical and scientific language is the simplest way to describe an appliance and how it works. It not only allows for efficient communication with other disciplines for joint research but also offers the best way to teach clinical orthodontics to residents or other students. The old approach was primarily to teach appliance fabrication. Treating patients was just following a technique. An adjustment was how you shaped an arch: Watch how I make a tip-back bend, and duplicate it.
Emphasis was on shape, and therefore we can call it shape-driven orthodontics. The biomechanical approach emphasizes principles and force systems. This approach, force-driven orthodontics, is the theme of this book.
With clear terminology and sound scientific principles, the learner can better understand how to fabricate and use any appliance or configuration. It shortens the time and confusion in teaching students. It is said that a number of years of experience is required to complete the education of an orthodontist. Some say as many as 10 years. Why? It is the time needed to make and learn from your mistakes. If the student understands the biomechanical basis of an appliance, many common mistakes will never be made.
It is not only the beginning student who benefits from sound biomechanical teaching. As new appliances are developed, the experienced orthodontist can better learn the hows
and whys
so that the learning interval is shortened. More importantly, fewer errors will be made. Lectures at meetings will be shorter and easier to understand.
FIG 1-1 Jacques Carelman painting of a pitcher. Although the pitcher looks reasonable, it will not actually pour coffee, much like some orthodontic appliances seem reasonable but do not actually work.
FIG 1-2 A wine bottle in a curved wine rack. Although it would seem that the bottle would fall over, it is in a state of static equilibrium so that it does not move. Similarly, some orthodontic principles that seem illogical are actually quite effective because they are based on sound biomechanics.
Knowledge Transfer Among Appliances
The orthodontist may feel comfortable treating with a given appliance because routine treatment has become satisfactory and predictable. However, if he or she wants to change appliances (eg, moving from facial to lingual orthodontics), the mechanics may not be the same. When lingual orthodontic appliances were introduced a few years ago, some orthodontists were troubled that their mechanics (wire configurations and elastics) did not do the same on the lingual that they did on the buccal. Biomechanical principles that determine the equivalent force system on the lingual are simple to apply. Clinicians could have saved much learning time
spent doing trial and error experimentation. A few simple calculations covered in chapter 3 could have helped the clinician avoid any aggravation.
Advantages of Biomechanical Knowledge
Historically, there have been many exaggerated claims made by clinicians and orthodontic companies about the superiority of appliances or techniques. Hyperbole is used with such terms as controlled, hyper, biologic, and frictionless. Journals and orthodontic associations are now doing a better job of monitoring possible conflicts of interest. The best defense against unwanted salesmanship is to stay vigilant and always apply scientific biomechanics. What may look possible becomes clearly impossible when the underlying principles are understood. The pitcher in Jacques Carelman’s painting looks reasonable, but it will not pour coffee (Fig 1-1). On the other hand, a sound biomechanical background can make possible what appears impossible. A filled wine bottle is placed in a curved wine rack. The rack is not glued to the table, so one might think that the bottle will tip over, but it does not (Fig 1-2). As will be discussed later, the bottle is in static equilibrium, and hence the impossible becomes possible. Figure 1-3a shows an auxiliary root spring on an edgewise arch designed to move the maxillary incisor roots to the lingual. Is this possible or impossible? A labial force is required to insert the spring (Fig 1-3b). After insertion, the spring is bent to push lingually on the cervix of the crown to produce lingual root torque. What is easily overlooked in this situation is that the rectangular wire in the slot will produce an equal and opposite force with labial root torque, making this appliance impossible (Fig 1-3c). Placing the auxiliary root spring on a round or undersized wire makes the mechanism possible (Fig 1-3d).
The many advantages of biomechanical knowledge for the clinician, including better and more efficient treatment, have been mentioned here. But what about for the patient? Obviously, one benefit is better and shorter treatment. Another significant advantage is the elimination of undesirable side effects. Side effects might require more patient cooperation. To correct problems, new elastics, headgear, surgery, or TADs may be prescribed. With better mechanics, such anchorage loss would not have happened. It is not fair to ask our patients to cover up our mistakes with added treatment time or added therapy requiring considerable appliance wear, such as headgear.
FIG 1-3 (a) An auxiliary root spring on an edgewise arch designed to move the maxillary incisor roots to the lingual (before insertion). (b) A labial force is required to insert the spring. (c) After insertion, the spring is bent to push lingually on the cervix of the crown to produce lingual root torque. However, the rectangular wire in the slot will produce an equal and opposite force with labial root torque, making this appliance impossible. (d) Placing the auxiliary root spring on a round or undersized wire makes the mechanism possible.
The future of the profession will be determined by how well we train our residents. Currently, not all graduate students are being trained in scientific biomechanics in any depth. Ideally, when a student graduates from a program, an understanding of biomechanics should be second nature. Otherwise, he or she will not be able to apply it clinically. Lectures and problem-solving sessions are very useful; however, biomechanical principles must be applied during chairside treatment. Carefully supervised patients and knowledgeable faculty are the key ingredients to teaching biomechanics.
Conventional wisdom in orthodontics has emphasized the appliance. Graduate students and orthodontists were taught to fabricate appliances or make bends or adjustments in these appliances. Perhaps some lip service was given to biomechanics or biology, but basically the clinician was a fabricator and user of appliances. Treatment procedures were organized into a technique sequence. This empirical approach to clinical practice led to the development of different schools of thought, sometimes identified with the name of a leading clinician. Shape-driven orthodontics (where forces are not considered) is usually a standard sequence or cookbook approach that does not adequately consider the individual variation among patients.
The new wisdom is not appliance oriented. It involves a thinking process in which the clinician identifies treatment goals, establishes a sequence of treatment, and then develops the force systems needed for reaching those goals. Only after the force systems have been carefully established are the appliances selected to obtain those force systems. This is quite a contrast to the older process in which the orthodontist considered only wire shape, bracket formulas, tying mechanisms, friction, play, etc, without any consideration whatsoever of the forces produced.
It is easy for the clinician to harbor negative feelings about orthodontic biomechanics. Some may believe that treatment mechanics are only common sense and that intuition and everyday knowledge are sufficient. Others may regard biomechanics as too sophisticated, demanding, and complicated for daily practice. Indeed, many of us became dentists and orthodontists because, as students, we disliked mathematics and physics and preferred the biologic disciplines. Fortunately, the physics used in orthodontics is not complicated, and many simple principles and concepts can be broadly and practically applied. Orthodontics is not nuclear physics. Scientific biomechanical thinking is actually easier than vague and disorderly thought processes, and it simplifies our overall treatment.
The genius of pioneers such as Newton is that their principles are anything but common sense. Aristotle reasoned that if a heavy weight and a light weight were dropped from the same height, the heavy weight would hit the ground first. This seems like common sense. Galileo, on the other hand, thought that both weights would hit the ground at the same time. He supposedly dropped two different weights from the Leaning Tower of Pisa to prove his point. Many common-sense ideas are false. Common sense would tell you that the earth is flat and that the sun revolves around the earth, and yet the earth is round, and it revolves around the sun. As will be shown in this text, many of our conventional and accepted orthodontic ideas from the past are invalid.
There are many textbooks and articles that describe techniques involving different types of brackets, sequences of wire change, and slot formulas, much like a recipe in a cookbook. Many malocclusions might be successfully treated following such cookbook procedures. However, surprises can occur as unpredicted problems develop during treatment. One or more recipes will not always work because malocclusions vary so much. Therefore, the clinician must seek sound biomechanical principles rather than a technique to correct the problem. Thus, bioengineering is needed not only for the challenging situation but also for the routine patient who may show an unexpected response to an appliance. Even if we typically treat by a certain technique, we must have biomechanical knowledge and skill in reserve, which will be required when unfortunate surprises strike. If that knowledge is not readily available because we do not continually apply it, we limit our ability to get out of trouble. By way of analogy: The author recently tried to do some simple plumbing. When the house became flooded, an experienced plumber was called, and his backup knowledge and expertise solved the problem. Unfortunately, when the orthodontist gets into trouble, he or she traditionally does not seek the advice of others, leading to either a poorer result or a lengthier treatment time.
What about the easy
case we may routinely treat successfully? It could be argued that applying creative biomechanics could also improve our treatment result or allow us to treat more efficiently. We might treat a Class II patient without extraction with some leveling arches and Class II elastics. A certain technique might work, negating any biomechanical thinking. However, the end point might be different than our treatment goals. Perhaps the mandibular incisors are undesirably flared or the occlusal plane angle steepened too much. The goals and quality of treatment can vary so much that it is difficult to define what a routine or easy
case entails. It takes a very knowledgeable orthodontist to identify what an easy
case really is.
Technical competence is developed by fabricating and inserting appliances, but understanding principles involves thinking. Admittedly, technical skill is important in daily practice. But performing techniques without understanding the fundamental principles behind them is risky. At the same time, principles without technique lack depth. This book therefore explains the hows
and whys
of orthodontic treatment, which are inseparable.
Orthodontic biomechanics is not just a theoretical subject for academics and graduate students. It is the core of clinical practice; orthodontists are biophysicists in that daily bread-and-butter orthodontics is the creative application of forces. The 21st century will be characterized by a major shift from shape-driven orthodontic techniques to a biomechanical approach to treatment, and with this shift will come rapid advancements in treatment and concepts.
2
Concurrent Force Systemsx
Goodbye, old friend. May the Force be with you.
— Obi-Wan Kenobi
The branch of physics dealing with forces is called mechanics. The most relevant Laws of Newton are the First and Third Laws. Many orthodontic questions and their solutions can be considered equilibrium situations, so Newton’s Second Law, which relates forces to bodies that accelerate, is less important. The division of mechanics describing bodies in equilibrium is called statics and for bodies that accelerate, kinetics. The simplest force system is force acting on a point; it is fully defined by force magnitude, force direction, and sense. Manipulating a force system includes adding a number of forces to obtain a resultant or breaking up a resultant into separate components. Forces are vectors that must be added geometrically and cannot be added algebraically. Simple orthodontic appliances that act on a point are maxillomandibular elastics (also known as intermaxillary elastics), finger springs, and cantilevers.
Medical doctors may use thousands of medicines to treat their patients, but orthodontists use only one treatment modality: force. No matter what kinds of wires, springs, and brackets or appliances used, the hardware serves only as an intermediate tool to deliver a force or a series of forces. With proper force positioning and dosage, all kinds of tooth movement can be achieved. Therefore, knowledge of force is essential for understanding tooth movement. Because the word force has different meanings in common language and in physics, important definitions and concepts required for the application of force analysis to the field of orthodontics are developed in this chapter.
The Field of Mechanics
Mechanics is the field of physics dealing with the study of forces. Mechanics can be subcategorized into statics, kinetics, and materials science. Statics deals with a force on a body with constant velocity, including a state of rest. Kinetics deals with a force on a body with acceleration. Finally, materials science deals with the effect of forces on materials.
The classic laws explaining the relationship between force and bodies were presented by Newton in 1686. Newton’s First Law (law of inertia) describes bodies at rest or bodies with uniform velocity (no acceleration): An object at rest tends to stay at rest, and an object in motion tends to stay in motion with the same velocity and in the same direction unless acted upon by an unbalanced force. This is the most important law for orthodontics, because it is the basis of all equilibrium applications. Activated appliances and restrained teeth within the bone and periodontium are examples of the first law. A simple orthodontic appliance component, a coil spring, is shown in Fig 2-1. The deactivated spring in Fig 2-1a is at rest; there are no forces acting on it. (This free-body diagram purposely ignores gravity and other nonrelevant forces.) The application of two forces in Fig 2-1b extends the spring, which can now be placed in the mouth between the anterior and posterior teeth for space closure. The forces are equal (100 g) and opposite, allowing the spring to remain in equilibrium. The spring deforms but does not accelerate, demonstrating the First Law.
Newton’s Second Law (law of acceleration) states that when force is applied to an object, the object accelerates proportionally to the amount of force applied. The famous Newtonian formula is
where m is mass, a is acceleration, and F is force.
FIG 2-1 Simple coil spring demonstrating Newton’s First Law. (a) Deactivated. (b) Activated. The spring is in equilibrium in both a and b.
FIG 2-2 (a and b) Newton’s Third Law. Equal and opposite forces act at the canine. FA (blue arrow), activation force on the coil spring; FD (red arrow), deactivation force on the canine.
This formula defines the nature of force—an ability to accelerate an object. One would think that Newton’s Second Law would have important applications in orthodontics. Are teeth not moving? Although they move, they are not accelerating. Teeth are restrained objects and hence are bodies in equilibrium and at rest. Imagine a simple model in which a tooth is suspended by coil springs on all sides. Similar to the spring in Fig 2-1, the tooth is still in equilibrium after a force is applied to the crown. Therefore, this book does not cover applications in the field of kinetics.
Newton’s Third Law (law of action and reaction) states that for every action there is always an equal and opposite reaction (ie, for every force there is an equal and opposite force). The commonly used example of this law is a rifle shot where the bullet feels the force and one’s shoulder feels the equal and opposite force. In Fig 2-2a, a coil spring will be activated by a mesial force to allow its placement on the canine hook. Because this force (FA) produces an elongation of the elastic, it is called the activation force (Fig 2-2b). This force extends the elastic during the act of placement by the orthodontist, and later the canine hook maintains the mesial activation force, holding the elastic in place. At the canine hook, one observes the two equal and opposite forces of Newton’s Third Law (see Fig 2-2b). The blue force (FA) is the activation force (the force on the appliance), and the red force (FD) is the equal and opposite force on the tooth or the hook. This equal and opposite force (red arrow) is called the deactivation force and is in the direction of the tooth movement. In other words, the hook pulls on the elastic, and the elastic pulls on the hook. These action and reaction forces occur at the hook between two objects. In this example, it is also true that the canine and the molar feel equal and opposite forces, but this is not an expression of Newton’s Third Law. Why? The elastic is in equilibrium; hence, the forces on the elastic are equal and opposite. The explanation lies in Newton’s First Law, which covers equilibrium on bodies at rest (the elastic is not accelerating). Newton's Third Law is properly used when both activation and deactivation forces are showing on the canine (see Fig 2-2b).
This chapter introduces how to manipulate or handle orthodontic forces. First, concurrent forces (ie, forces acting on a point) are considered. In the next chapter, this will be developed further to consider forces in three dimensions on a body.
Characteristics of a Force
A force has three attributes: magnitude, direction and sense, and point of force application. Figure 2-3 shows three forces acting on a point (red dot), a hook on the maxillary arch. Because the hook defines the point of force application, only force magnitude and direction require further description. From where do the forces originate? Their source could be maxillomandibular elastics* or intra-arch elastics. Forces are vector quantities that cannot be added algebraically but are rather added geometrically. Note that the elastics have different angles to each other, representing different lines of force application and denoting their vector properties.
FIG 2-3 Elastic forces acting on a point. The hook (red dot) defines the point of force application. Different force magnitudes are represented by the length of the red arrows. The direction of the forces can be measured by the force angle to the occlusal plane.
Force magnitude
The force magnitude is given in grams (g). The force magnitudes in Fig 2-3 are represented by arrows; the length of the arrow is proportional to the magnitude of the force. Note that the 150-g maxillomandibular elastic arrow is three times as long as the 50-g vertical elastic arrow and half the length of the 300-g intra-arch elastic arrow.
Why are grams the unit of force in this example? This unit is technically incorrect, as shown below. Historically in America, ounces were used, and spring measuring scales were calibrated in ounces. More universal metric force gauges then became available, and the units were in grams. Generally, scales used by the layman for measuring body weight can be calibrated in pounds or kilograms. For the physicist, these are not force (weight) units but rather units for measuring mass. So let us briefly consider the relationship between mass and force. Again, the classic Newtonian formula is force equals mass times acceleration (F = m × a). The force is the product of mass (kilograms) and acceleration (m/s²). The unit of this magnitude of force is therefore kg·m/s², and 1 kg·m/s² equals 1 Newton (N). The terms gram weight and kilogram weight are therefore incorrect.
Traditionally, orthodontists use the gram as the unit of force. In the strict sense as explained above, this is incorrect because grams are a unit of mass and not force. For example, gravity (a force) at sea level attracts a 100-g mass (the amount of material). The calculated acceleration of gravity is 9.8 m/s². Let us now calculate how much force is acting on the 100-g mass at sea level using Newton’s Second Law.
*Traditionally, orthodontists have used the term intermaxillary elastics to denote elastics placed between the maxillary and mandibular arches, because both jaws used to be referred to as maxillae. However, because the mandible is no longer considered a maxilla, the term intermaxillary makes no sense, hence the new term: maxillomandibular elastics.
FIG 2-4 (a) Weight force depends on gravitational acceleration, so people weigh less on the moon than on Earth. (b) However, the activation of an orthodontic appliance would produce the same force on the moon as on Earth.
Scientifically, a centi-Newton (cN) is the correct unit for force, but in this book, grams will be used as the unit of force because of its tradition in orthodontics; perhaps this unit will be easier to understand for the clinician. However, the authors recommend that scientific publications and presentations use Newtons or centi-Newtons as the unit of choice. For purposes of practical conversion, 1 g equals 1 cN.*
Perhaps in the not-so-distant future, an orthodontist might have a satellite office on the moon. If we attach a 100-g mass to a force gauge, as shown in Fig 2-4a, the measured gravitational force will be about 1 N on Earth but only 0.17 N on the moon. This is why people can jump with less effort on the moon, because they actually weigh less there. Let us now use this same force gauge to measure the force from an orthodontic appliance (Fig 2-4b). This type of force gauge uses a calibrated spring and has nothing to do with gravity. A spring gauge is based on Hooke’s law, where force is proportional to wire deflection. If the same appliance is used on the moon as on Earth, there would be no difference in the forces, provided the activation is the same (see Fig 2-4b). Our imaginary orthodontist could therefore use the same appliances and activations used on Earth, provided that there were no biologic differences required in outer space.
Force direction and sense
Force also has sense and direction. The direction of the force is defined by its line of action. This direction is referred to as the sense. The arrows shown in Fig 2-3 demonstrate direction, sense, and the line of action of three elastics. The origin of each arrow is the point of force application (hook; red dot), the line (of action) indicates direction, and the arrowhead indicates the sense. The direction of the force in Fig 2-5 is demonstrated by the dotted line, and the arrowhead shows the sense.
*More accurately, 1 g equals 0.98 cN, and 1 cN equals 1.02 g.
To specify the direction of a force vector, a proper coordinate system is required; the direction of the force can be represented by the angle between a given axis of the coordinate system and the line of action. There are several coordinate systems, but rectilinear Cartesian coordinates are most frequently used. Figure 2-6a shows the three axes of a Cartesian coordinate system and a sign convention in three dimensions. In this book, two-dimensional diagrams, such as those in Fig 2-6b, are used for simplicity’s sake. Any coordinate system and sign convention is acceptable, provided that it is clearly specified.
The orientation of a coordinate system can be set arbitrarily, depending on the problem to be studied. In an orthodontic analysis, frequently used axes include the occlusal plane, the Frankfort horizontal, the midsagittal plane, and the long axis of a tooth. The direction of an orthodontic force is specified in accordance with a given established coordinate axis. For example, in Fig 2-7, a crisscross elastic (red arrow) is applied at 90 degrees to the mandibular right first molar relative to the midsagittal plane. What is the best coordinate system to evaluate the molar movement? Of the three shown (intersecting sets of dotted lines), the author would most likely select the system based on the mesiodistal or buccolingual axes of the tooth. Resolving the force into rectilinear components tells us that there are both mesial and lingual forces (yellow arrows). It has been argued at some orthodontic meetings that there are advantages to canine retraction achieved by either pushing from the mesial or pulling from the distal. As observed in Fig 2-8, however, there is no difference in the line of action if the force is applied at the mesial or the distal. A force acting anywhere along this line of action has the same effect. In other words, a force can be moved along its line of action without changing its effect. This principle is called the law of transmissibility of force. The appliance may differ with either an open or closed coil spring, but if the force is along the same line of action, the response should be the same (assuming no other variables). A locomotion engine can either push or pull a train car with the same effect.
FIG 2-5 Force sense and direction. The line of action (dotted line) demonstrates the direction, and the arrowhead denotes the sense of the force.
FIG 2-6 Cartesian coordinates in three dimensions. (a) Three mutually perpendicular axes with a sign convention specified on each axis. (b) Two-dimensional diagrams with the same coordinates as those shown in a. For simplicity’s sake, most diagrams in this text show only two dimensions.
FIG 2-7 A crisscross elastic is attached at the buccal of the mandibular right molar. A coordinate system is selected that gives the information that is most useful. Here the mesiodistal crown axis system was selected. The elastic force (red arrow) has both lingual and mesial components of force (yellow arrows).
FIG 2-8 Law of transmissibility of force. The effect is the same whether the force is applied at the mesial or the distal of a canine as long as the force is along the same line of action (dotted line).
FIG 2-9 A force from an occipital headgear (FR, red arrow) can be resolved graphically into two rectilinear horizontal (Fx) and vertical (Fy) components (yellow arrows).
FIG 2-10 The same force from an occipital headgear (FR) shown in Fig 2-9 is resolved into Fx and Fy components mathematically using simple trigonometric functions.
Manipulating Forces
Components
It is convenient to resolve a force into rectilinear components (ie, two forces at 90 degrees to each other). Another clinical way to look at direction is to ask how much force is parallel to the occlusal plane and how much is vertically directed. If distances are accurately drawn to represent the forces, the solution can be obtained graphically. A force from an occipital headgear is shown in Fig 2-9. The direction is clearly shown as 30 degrees to the occlusal plane. Note that the headgear force (FR, red arrow) can be understood by mentally walking from the hook (application point) at 30 degrees upward and backward. However, we can resolve this force into rectilinear components graphically by drawing two perpendicular lines: Force X (Fx) and Force Y (Fy), with Fx parallel and Fy perpendicular to the occlusal plane. Now let us take our imaginary walk using these lines. Starting at the hook, we walk along the occlusal plane (Fx) to the right and then walk upward at 90 degrees to the occlusal plane (Fy). This route may take longer, but we still end up at the apex of the original red arrow. Forces are vectors, so we can establish components using geometric addition. If measured, the two component force lengths (yellow arrows) tell us the magnitude and sense of the vertical and horizontal rectilinear components of the original force. Although the Fy component is depicted at the arrowhead of Fx for analysis, Fy acts at the hook.
During clinical visits, many times a diagram may be good enough to evaluate the rectilinear components of a force (graphic method). However, we might prefer to use an analytical method, employing some simple trigonometry. Figure 2-10 is the same diagram as Fig 2-9, where the angle of the headgear force can be any angle (θ). Fx and Fy can be determined using the following trigonometric relationships:
FIG 2-11 The two forces (red arrows) applied at the canine bracket can be added arithmetically to give a resultant (yellow arrow) because they act along the same line of action.
FIG 2-12 Two elastics (red arrows) applied at the canine hook. The resultant, FR (yellow arrow), is determined using the parallelogram method. The arrow (FR) connects the origin at the hook with the opposite corner of the parallelogram.
Resultants
Often clinical situations require that we add a number of forces. The canine shown in Fig 2-11 has two forces acting at the bracket from two chain elastics (red arrows). Because both elastics act along the same line of action, we can find the sum of forces by simple arithmetic (addition), remembering that a force vector has a sense (direction), and therefore sign (+ or –) must be considered.
The principle that forces along the same line of action can be simply added together is important for orthodontists. The two elastics on the canine in Fig 2-11 produce a total of +200 g (yellow arrow). This sum of all the forces is called the resultant.
In Fig 2-12, two forces from maxillomandibular elastics (F1 = 300 g, F2 = 100 g) are applied to the canine hook. The magnitudes of each force are the same as those in Fig 2-11, but they lie on different lines of action. What is the magnitude of the resultant? If you said 400 g, the arithmetic total, the answer is incorrect. Forces are vectors and must be added geometrically. Forces F1 and F2 do not lie along the same line of action. The addition must be done graphically.
Lines parallel to F1 and F2 are constructed, forming a parallelogram. A diagonal line (FR, yellow arrow) is drawn from the force origin (the hook) to the opposite corner of the constructed parallelogram. This line represents the vector sum of F1 and F2 and is the resultant force. The length of the diagonal line proportionally represents the force magnitude, and the angle to any plane represents the sense and direction of the resultant. Note that the length of FR (resultant) is not the arithmetic sum of the lengths of F1 and F2, and its direction is different than the applied individual elastics. The clinician might be advised to place a single elastic (the resultant) for simplicity rather than two, because the action on the arch will be the same.
Perhaps a more useful and universal graphic method for force addition is the enclosed polygon method. Figure 2-13 shows the same component forces acting on the hook as shown in Fig 2-12. Sequential forces will be geometrically added instead of forming a parallelogram. Starting with F1, an arrow is drawn downward and to the distal. At the arrowhead of F1, F2 is drawn, keeping its angle and magnitude the same as the original F2 in Fig 2-12. Connecting the origin (the hook) with the arrowhead of the new F2 gives the resultant. In other words, we can walk the short way (yellow arrow resultant) or take the long way following the F1 and F2 components (red arrows), ending up in the same place.
The closed polygon method is particularly useful if more than two components are to be added. Four noncollinear forces are to be added in Fig 2-14. Each force is laid out in sequence, arrowhead to tail. The resultant force (FR, yellow) is a line connecting the origin hook and the final component (F4) arrowhead.
Graphic methods for finding a resultant are very practical for the clinician. Most of the time, they are accurate enough for patient care; more importantly, they do not require complicated calculations. During chairside treatment, we are able to visualize the forces and come to correct conclusions in our mind’s eye
visualization of force vectors and overall geometry. Nevertheless, an actual diagram is most helpful as a starting place for manipulating forces, either by graphic or analytical methods.
Analytical method for determining a resultant
Instead of the graphic method, resultants can be calculated by using trigonometric functions and the Pythagorean theorem. Figure 2-15a shows two forces (red arrows) acting on a hook mesial to the canine. F1 is a long Class II elastic, and F2 is a short and more vertical Class II elastic.
Step 1: Resolve all forces into components using a common coordinate system.
In order to add forces, common lines of action can be obtained by resolving F1 and F2 into x and y components. Figure 2-15a shows the forces F1 and F2 resolved into rectilinear components relative to an occlusal plane coordinate system. Fx is the horizontal component of force F, and Fy is the vertical component of force F.
Using trigonometry,
Step 2: Add all x forces and y forces.
All forces on the x-axis are added. All forces on the y-axis are added (Fig 2-15b).
Step 3: Draw a new right triangle using the summed Fx and Fy values.
A new right triangle is drawn based on Fx (the sum of Fx1 and Fx2) and Fy (the sum of Fy1 and Fy2) (Fig 2-15c).
Step 4: Calculate the magnitude and direction of the resultant.
The magnitude of the resultant is calculated using the Pythagorean theorem.
And the tangent function is used to calculate the direction (angle).
Below are some actual calculations using this method. Let us suppose that F1 = 300 g and F2 = 100 g, with the direction specified in Fig 2-15a.
Step 1: Find the components of each force.
Step 2: Add each component.
Step 3: Now we have the x and y coordinates of a resultant, and we can draw a new right triangle.
Step 4: Find the magnitude and direction of the resultant.
Therefore, θ = 37.3°.
FIG 2-13 Enclosed polygon method for adding forces graphically. Starting at the hook, each force is laid out tail to arrowhead, maintaining the magnitude, direction, and sense (red arrows). Connecting the origin at the hook and the end point gives the resultant (yellow arrow).
FIG 2-14 The enclosed polygon method is useful, especially when there are more than two components of force. FR (yellow arrow) is the vector sum of all four components (red arrows).
FIG 2-15 Analytical method for determining a resultant. (a) Resolve all forces into rectilinear components (yellow arrows). (b) Add all x and y forces. (c) Construct a new right triangle with the summed Fx and Fy values (yellow arrows). The hypotenuse (red arrow) is the resultant (FR). The magnitude and angle are found using the Pythagorean theorem and the tangent of θ.
Clinical Applications
This chapter has discussed important concepts relating to a force or a group of forces acting on a point. A force on a point was selected in one plane because it offers a simple introduction to force manipulation. The same principles will operate with forces on a body in two or three dimensions. The major difference is the location of the point of force application, which will be considered in the next chapter. However, the clinician will be confronted with many challenges that will involve forces on a single point only, so let us now consider some of these clinical applications.
Forces resolved into their rectilinear components are always useful in planning the force system for proper treatment. For example, we may want to know how large the distal force component is in comparison to the occlusal (vertical) component using the occlusal plane as our coordinate system.
Another clinical application is the simplification of the orthodontic appliance. In Fig 2-16a, two maxillomandibular elastics are used, a Class II elastic and a vertical elastic. These elastics could be replaced with a single elastic, the resultant (yellow arrow) in Fig 2-16b. The replacement makes it easier for the patient and is therefore more likely to ensure patient compliance. Conversely, sometimes it is better to use two or more elastics that will produce the same effect as a single elastic, because sometimes the direction of the force needs to be changed slightly. For example, the objective in Fig 2-17 is to deliver an intrusive force parallel to the long axis of the incisors. Two forces are used: (1) an intrusive force from an intrusive cantilever attached to the first molar auxiliary tube and (2) a chain elastic producing a distal force. Note that the resultant force (yellow arrow) is parallel to the mean of the root long axis. Moreover, multiple forces can replace a single force when a single force cannot be placed clinically because of anatomical limitations (eg, during canine retraction, three or more forces are applied at the bracket instead of one on the root).
FIG 2-16 (a) A Class II elastic is applied. A vertical elastic is also used to close an open bite. (b) By using the enclosed polygon method, the two elastics can be replaced with one elastic (yellow arrow), which is simpler for both the orthodontist and the patient.
FIG 2-17 Intrusive force from a cantilever (vertical red arrow) and distal force from an elastic chain (horizontal red arrow) produce a resultant force (yellow arrow) acting parallel to the long axis of the incisors. (a) Deactivated spring. (b) Activated spring.
Figure 2-18 shows an elastic chain engaged between brackets and a trans palatal arch. What would be the resultant force acting on the maxillary right second premolar and canine? Suppose the tension of the elastic is uniform; we could easily imagine a parallelogram and find the resultant graphically. The resultants (yellow arrows) on the premolar and canine are in the right directions to correct the malocclusion.
Suppose we want to apply lingual force on the canine. Figure 2-19a shows a single force directly acting on a canine using an auxiliary spring soldered to a passive lingual arch. What if there is no lingual arch present, and yet we need to apply a lingual force? The single lingual force can be resolved along the arch into two components (Fig 2-19b). Two simple elastics (component forces are red arrows) will produce the same effect on the canine as the auxiliary spring in Fig 2-19a. Anchorage, of course, will be different. Note that components are not always rectilinear.
Figure 2-20a seems to show the force system acting on the molar using a temporary anchorage device (TAD) and an elastic chain (gray arrow). But this diagram is incorrect. One might think that an intrusive force would be present because the elastic is wrapped above the entire crown. However, only a buccal force (red arrow) is produced from the elastic connecting the molar-bonded hook and the TAD (Fig 2-20b). Figure 2-20c demonstrates that although the chain elastic between the two hooks on the molar is stretched, this part of the elastic produces no force on the molar.
FIG 2-18 (a and b) One can easily imagine a parallelogram or enclosed polygon and estimate the magnitude and direction of the resultants (yellow arrows) graphically. The predicted direction of tooth movement is correct.
FIG 2-19 (a) A single force from a cantilever attached to a lingual arch gives a lingual force to the canine. (b) If no lingual arch is present, two components (red arrows) from an elastic chain could deliver a similar force.
FIG 2-20 An elastic chain is attached from a buccal TAD to the molar. (a) The gray force does not exist. (b) Only the intrusive buccal force (red arrow) is produced. (c) The elastic stretched between the two buttons on the molar delivers no vertical force to the molar because both forces (red arrows) cancel to zero.
Summary
This chapter developed the key principles and methods for manipulating forces acting on a point. In most orthodontic treatment, the clinician must plan for multiple point applications on three-dimensional bodies. The next chapter considers forces acting on more than one point in two and three dimensions—nonconcurrent forces. The principles and methods will be the same as for concurrent forces. Determining the point or points of force application will require consideration of an additional physical quantity—the moment.
Recommended Reading
Burstone CJ. Application of bioengineering to clinical orthodontics. In: Graber LW, Vanarsdall RL Jr, Vig KWL (eds). Orthodontics: Current Principles and Techniques, ed 5. Philadelphia: Elsevier Mosby, 2011:345–380.
Burstone CJ. Biomechanical rationale of orthodontic therapy. In: Melsen B (ed). Current Controversies in Orthodontics. Berlin: Quintessence, 1991:131–146.
Burstone CJ. Malocclusion: New directions for research and therapy. J Am Dent Assoc 1973;87:1044–1047.
Burstone CJ. The biomechanics of tooth movement. In: Kraus B, Riedel R (eds). Vistas in Orthodontics. Philadelphia: Lea and Febiger, 1962:197–213.
Fiorelli G, Melsen B. Biomechanics in Orthodontics 4. Arezzo, Italy: Libra Ortodonzia, 2013.
Gottlieb EL, Burstone CJ. JCO interviews Dr. Charles J. Burstone on orthodontic force control. J Clin Orthod 1981;15:266–278.
Halliday D, Resnick R, Walker J. Vectors. In: Fundamentals of Physics, ed 8. New York: Wiley, 2008:38–115.
Isaacson RJ, Burstone CJ. Malocclusions and Bioengineering: A Paper for the Workshop on the Relevance of Bioengineering to Dentistry [DHEW publication no. (NIH) 771198m, 2042]. Washington, DC: Government Printing Office, 1977.
Koenig HA, Vanderby R, Solonche DJ, Burstone CJ. Force systems from orthodontic appliances: An analytical and experimental comparison. J Biomech Engineering 1980;102:294–300.
Melsen B, Fotis V, Burstone CJ. Biomechanical principles in orthodontics. I [in Italian]. Mondo Ortod 1985;10(4):61–73.
Nanda R, Burstone CJ. JCO interviews Charles J. Burstone. II: Biomechanics. J Clin Orthod 2007;41:139–147.
Nanda R, Kuhlberg A. Principles of biomechanics. In: Nanda R (ed). Biomechanics in Clinical Orthodontics. Philadelphia: WB Saunders, 1996:1–22.
Nikolai RJ. Introduction to analysis of orthodontic force. In: Bioengineering: Analysis of Orthodontic Mechanics. Philadelphia: Lea and Febiger, 1985:24–70.
Smith RJ, Burstone CJ. Mechanics of tooth movement. Am J Orthod 1984;85:294–307.
Problems
1. Compare A, B, C, and D. Is there a difference? The force is acting on a very rigid, nondeformable wire in B and C, and the force is applied on a very flexible wire in D.
2. A 300-g force of headgear and a 100-g force of intra-arch elastic act on the first molar. Find the resultant.
3. A headgear (300 g) and a Class II elastic (100 g) act at a hook on the archwire. Find the resultant.
4. Find the resultant of the forces from the lingual arch and the crisscross elastic.
5. Resolve the 100-g force into two components parallel and perpendicular to the long axis of the tooth graphically and analytically when the angle is (a) 60 degrees, (b) 45 degrees, and (c) 110 degrees.
6. Resolve the 150-g force from a Class II elastic into two components parallel and perpendicular to the occlusal plane when the angle is (a) 20 degrees and (b) 45 degrees.
7. Resolve the 100-g crisscross elastic force attached at the buccal tube of the first molar into buccolingual and mesiodistal components.
8. Find the resultant of a 400-g headgear force and a 200-g Class II elastic force.
9. A Class II elastic and a headgear are simultaneously applied. The direction and magnitude of the elastic are kept constant. The resultant force must lie along the archwire axis. Find the angle when the headgear force is (a) 200 g, (b) 600 g, and (c) 1,000 g.
3
Nonconcurrent Force Systems and Forces on a Free Body
Measure what is measurable, and make measurable what is not so.
—Galileo Galilei