47 min listen
The Next Generation, Ripping Angles, Piston Fit Drawers and MORE!
The Next Generation, Ripping Angles, Piston Fit Drawers and MORE!
ratings:
Length:
40 minutes
Released:
Nov 17, 2023
Format:
Podcast episode
Description
This episodes Questions
Guy's Questions:
Hi guys, I’m current up to episode 43 of the podcast and can’t get enough. During this episode you discussed the merits of having a radial arm saw in your shop, or lack thereof in todays workflow. This got me thinking and I wanted to ask: what other tools are you aware of that were once used in woodshops that are no longer in general practice? I’m not talking about rocks and flints from the Stone Age, but rather anything in the past 60 or so years that have gone out of vogue. I can’t wait to hear Guys comments on my use of the word “vogue”. Hope you are well, and thanks again! Jarrett
Gentlemen,
Thanks for your thoughtful responses to my questions and observations.
This might be a potential topic: Do you think youtube and maker communities have created a renaissance for encouraging young people to get into wood working as a hobby or a profession?
I watched some amazing videos of young people making incredibly complicated turnings (among other things).
Thanks again. Chuck Have a great day.
Hi guys,
I love your podcast and have listened to every episode. I spend a lot of time on the road and have listened to many woodworking podcasts, yours is by far the best. I especially admire the work you do at “Purposeful Design “
I’m from Montreal and started woodworking as a hobby 5 years ago. I have 3 kids (9 & 2x6) and I only have limited hours/week of shop time. Additionally, I’m quite sensitive to sawdust…
I have a wall mounted 1hp dust collector with a dust separator and a 1 micron filter bag.
What is your opinion on bypassing the filter bag and venting outside?
Thank you for your contribution to the woodworking community,
Many blessings. Mike
Huy's Questions:
I think that my next tool purchase might be for a tracksaw-like guide for a circular saw or something similar. We sometimes run into situations where we need to rip a straight line. This would actually be more for ‘carpentry’ applications than fine ‘woodworking’. Things like ripping a long 2x6 or 2x8 at an angle, or rip a sheet of plywood in the field (so portability and reasonable durability would be important).
Whatever we buy would be used by a lot of different guys and we’d keep it in our shared workshop. Most of the guys have Dewalt circular saws but several guys have other brands (Milwaukee, Ridgid, etc.). So the track would have to be adjustable for the bases of the various saws. I’ve spent zero time investigating this. Thought I’d start here. Any recommendations?
- Mark
Hello everyone, I was wondering if you could help me with figuring out a process for flattening double angled barstool legs in my shop. Last fall I was commissioned to build a set of saddle barstools for a client. The legs from front and back have a 5 degree angle on them, while the view from the sides had a 6.5 degree angle. I tried running them through my table saw (on the front and back sides) on a cross cut sled but this still produced some wobble from the 6.5 degree sides. I wound up just taking some adhesive backed sandpaper and sticking it on the flattest spot in my shop (my tablesaw) and sanding down for multiple hours. Do you know of anything that I can build or use that wont take the hours of sanding like I did for any future commissions.
Thanks, Paul Genereux (Twin Lake Woodshop)
Hey guys, I have a question around piston fit drawers and their longevity and overall use. I know they are a sign of the highest craftsmanship but how well do they hold up? In the summer will everything swell and the drawers will stick? If you ever moved how would that affect the piece? I don’t have an exact project in mind but debating the idea of trying my hand at this in my next build.
So when would you use piston fit for drawers over soft close mechanism, wooden runners ect? Is the juice worth the squeeze?
Thanks, Jesse
Guy's Questions:
Hi guys, I’m current up to episode 43 of the podcast and can’t get enough. During this episode you discussed the merits of having a radial arm saw in your shop, or lack thereof in todays workflow. This got me thinking and I wanted to ask: what other tools are you aware of that were once used in woodshops that are no longer in general practice? I’m not talking about rocks and flints from the Stone Age, but rather anything in the past 60 or so years that have gone out of vogue. I can’t wait to hear Guys comments on my use of the word “vogue”. Hope you are well, and thanks again! Jarrett
Gentlemen,
Thanks for your thoughtful responses to my questions and observations.
This might be a potential topic: Do you think youtube and maker communities have created a renaissance for encouraging young people to get into wood working as a hobby or a profession?
I watched some amazing videos of young people making incredibly complicated turnings (among other things).
Thanks again. Chuck Have a great day.
Hi guys,
I love your podcast and have listened to every episode. I spend a lot of time on the road and have listened to many woodworking podcasts, yours is by far the best. I especially admire the work you do at “Purposeful Design “
I’m from Montreal and started woodworking as a hobby 5 years ago. I have 3 kids (9 & 2x6) and I only have limited hours/week of shop time. Additionally, I’m quite sensitive to sawdust…
I have a wall mounted 1hp dust collector with a dust separator and a 1 micron filter bag.
What is your opinion on bypassing the filter bag and venting outside?
Thank you for your contribution to the woodworking community,
Many blessings. Mike
Huy's Questions:
I think that my next tool purchase might be for a tracksaw-like guide for a circular saw or something similar. We sometimes run into situations where we need to rip a straight line. This would actually be more for ‘carpentry’ applications than fine ‘woodworking’. Things like ripping a long 2x6 or 2x8 at an angle, or rip a sheet of plywood in the field (so portability and reasonable durability would be important).
Whatever we buy would be used by a lot of different guys and we’d keep it in our shared workshop. Most of the guys have Dewalt circular saws but several guys have other brands (Milwaukee, Ridgid, etc.). So the track would have to be adjustable for the bases of the various saws. I’ve spent zero time investigating this. Thought I’d start here. Any recommendations?
- Mark
Hello everyone, I was wondering if you could help me with figuring out a process for flattening double angled barstool legs in my shop. Last fall I was commissioned to build a set of saddle barstools for a client. The legs from front and back have a 5 degree angle on them, while the view from the sides had a 6.5 degree angle. I tried running them through my table saw (on the front and back sides) on a cross cut sled but this still produced some wobble from the 6.5 degree sides. I wound up just taking some adhesive backed sandpaper and sticking it on the flattest spot in my shop (my tablesaw) and sanding down for multiple hours. Do you know of anything that I can build or use that wont take the hours of sanding like I did for any future commissions.
Thanks, Paul Genereux (Twin Lake Woodshop)
Hey guys, I have a question around piston fit drawers and their longevity and overall use. I know they are a sign of the highest craftsmanship but how well do they hold up? In the summer will everything swell and the drawers will stick? If you ever moved how would that affect the piece? I don’t have an exact project in mind but debating the idea of trying my hand at this in my next build.
So when would you use piston fit for drawers over soft close mechanism, wooden runners ect? Is the juice worth the squeeze?
Thanks, Jesse
Released:
Nov 17, 2023
Format:
Podcast episode
Titles in the series (94)
Episode 61 - Favorite Cherry Finish, MFT/3 Hype, Salt With Your Glue?, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Guy 1) I'm a part-time woodworker that does occasional commission work for a local distillery. Two weeks ago—after listening to several of your episodes discussing track saws and Guy's affinit... by Woodshop Life Podcast