47 min listen
Design Workflow, Bad Tools, Outdoor Projects and MORE!!
Design Workflow, Bad Tools, Outdoor Projects and MORE!!
ratings:
Length:
57 minutes
Released:
Dec 29, 2023
Format:
Podcast episode
Description
Guy's Questions:
Guys,
Recently I’ve been trying to expand my meager wood shop with budget friends older tools. (Most recently a delta x5 6” jointer to fix up and repaint for example).
What would you look for when shopping for a used band saw you’re hoping to re-saw with? Where do you look for parts for older/discontinued tools? Any advice on tools that are best to just buy new?
Many thanks, Dave
Can you share about your design process? My biggest challenge is coming up with designs or finding plans (or redesigning plans) that are going to come out terrific without being too far above my skills, the tools I have, or my available time. Do you ever make prototypes or miniatures first? Do you do your planning in Illustrator, Sketchup, Rhino or ? Or do you just make notes and sketches on paper? And where do you keep your notes so you can recreate the same results?
For context: I discovered woodworking during the pandemic and fell in love with it. I'm a senior woman and it's a wonderful hobby for me (not a career or a side hustle). I'll never make lots of the same item for selling, but making only one doesn't work because I don't get good at it until I make at least 3. Trish
Thank you so much for covering my question about building a Butcher Block. I was shocked that Guy could speak French!!! I should not be surprised as Guy is a French name (pronounced Gkee). However, I am not familiar with the expression he used, but he is excused since he prefaced it with "Pardon my French". Guy, you are forgiven, but if you want to use some really good French salty words to punctuate a thought, I am here for you buddy. We frogs need to stick together. On a side note, I have another question. I would eventually like to purchase a drill press. I really like the Nova Voyager and its direct programmable drive. My question is, what is the advantage of a free standing vs a bench mount drill press. I can see the advantage of a bench mount as it can provide storage space below. But why would any wood worker prefer a free standing unit? I believe I saw in huy's video he does have the Nova drill press. From Thailand, Bert Plourde
Huy's Questions:
Hi guys! Thank you for the great podcast. I look forward to listening to half of your show on the coincidentally timed drive to our local Woodcraft, and the other half on the way home. You put out great information, and humbly have the best show out there.
I have a question about sanding mops, and don’t know if any of you have experience with them. I’m currently making a large batch of ‘Contemporary Door & Drawer Pulls’ based on Larissa Huff & Robert Spieces’s article in FWW issue #289. Using Walnut.
One of the last steps in the article says, “To further refine the shape, and give the pull a nice soft quality, we finish up those hard to reach edges with a flap sander in the drill press. This sanding tool gives the pull a wonderfully tactile feel…”
After looking at the sanding mops in the Klingspor catalog, I’m a bit overwhelmed by the many options.
I’m curious as to which grit (grits) you might suggest to get that oh so important ‘wonderfully tactile feel’. I also wondered if there is a particular manufacturer you’ve had success with.
Thank you for your help!
Kevin Long
Hey guys,
As a hobbyist I like projects where I have to figure out something new (but not too extreme).
Sometimes I will modify a plan to make it more functional, more interesting, or just so I don’t get bored. Most of the time I don’t regret it, but occasionally I do kick myself.
As professional woodworkers how do you balance the need to be efficient and the desire to be creative?
Thanks, Chuck
Hello gentlemen,
I am in the middle of a remodel that will finish with painting the outside. I am going to make shutters for the windows and would like suggestions on what wood to buy. They will be painted.
I live in California and won’t have woods like alder or ash or southern pine available. The most common outdoor wood around here is r
Guys,
Recently I’ve been trying to expand my meager wood shop with budget friends older tools. (Most recently a delta x5 6” jointer to fix up and repaint for example).
What would you look for when shopping for a used band saw you’re hoping to re-saw with? Where do you look for parts for older/discontinued tools? Any advice on tools that are best to just buy new?
Many thanks, Dave
Can you share about your design process? My biggest challenge is coming up with designs or finding plans (or redesigning plans) that are going to come out terrific without being too far above my skills, the tools I have, or my available time. Do you ever make prototypes or miniatures first? Do you do your planning in Illustrator, Sketchup, Rhino or ? Or do you just make notes and sketches on paper? And where do you keep your notes so you can recreate the same results?
For context: I discovered woodworking during the pandemic and fell in love with it. I'm a senior woman and it's a wonderful hobby for me (not a career or a side hustle). I'll never make lots of the same item for selling, but making only one doesn't work because I don't get good at it until I make at least 3. Trish
Thank you so much for covering my question about building a Butcher Block. I was shocked that Guy could speak French!!! I should not be surprised as Guy is a French name (pronounced Gkee). However, I am not familiar with the expression he used, but he is excused since he prefaced it with "Pardon my French". Guy, you are forgiven, but if you want to use some really good French salty words to punctuate a thought, I am here for you buddy. We frogs need to stick together. On a side note, I have another question. I would eventually like to purchase a drill press. I really like the Nova Voyager and its direct programmable drive. My question is, what is the advantage of a free standing vs a bench mount drill press. I can see the advantage of a bench mount as it can provide storage space below. But why would any wood worker prefer a free standing unit? I believe I saw in huy's video he does have the Nova drill press. From Thailand, Bert Plourde
Huy's Questions:
Hi guys! Thank you for the great podcast. I look forward to listening to half of your show on the coincidentally timed drive to our local Woodcraft, and the other half on the way home. You put out great information, and humbly have the best show out there.
I have a question about sanding mops, and don’t know if any of you have experience with them. I’m currently making a large batch of ‘Contemporary Door & Drawer Pulls’ based on Larissa Huff & Robert Spieces’s article in FWW issue #289. Using Walnut.
One of the last steps in the article says, “To further refine the shape, and give the pull a nice soft quality, we finish up those hard to reach edges with a flap sander in the drill press. This sanding tool gives the pull a wonderfully tactile feel…”
After looking at the sanding mops in the Klingspor catalog, I’m a bit overwhelmed by the many options.
I’m curious as to which grit (grits) you might suggest to get that oh so important ‘wonderfully tactile feel’. I also wondered if there is a particular manufacturer you’ve had success with.
Thank you for your help!
Kevin Long
Hey guys,
As a hobbyist I like projects where I have to figure out something new (but not too extreme).
Sometimes I will modify a plan to make it more functional, more interesting, or just so I don’t get bored. Most of the time I don’t regret it, but occasionally I do kick myself.
As professional woodworkers how do you balance the need to be efficient and the desire to be creative?
Thanks, Chuck
Hello gentlemen,
I am in the middle of a remodel that will finish with painting the outside. I am going to make shutters for the windows and would like suggestions on what wood to buy. They will be painted.
I live in California and won’t have woods like alder or ash or southern pine available. The most common outdoor wood around here is r
Released:
Dec 29, 2023
Format:
Podcast episode
Titles in the series (94)
Episode 61 - Favorite Cherry Finish, MFT/3 Hype, Salt With Your Glue?, & MUCH More!: Support us on Patreon: https://www.patreon.com/woodshoplife Guy 1) I'm a part-time woodworker that does occasional commission work for a local distillery. Two weeks ago—after listening to several of your episodes discussing track saws and Guy's affinit... by Woodshop Life Podcast