If you watch free over-the-air television with an antenna, you should rescan your TV set periodically to make sure you're receiving all the available channels in your area. This is the same scan that you did to find your local channels when you set up your TV or converter box for the first time. If you haven't scanned your TV recently, you might be surprised at how many stations are now available.
You can check the FCC's DTV reception map to check for channels available at your location. For more information on antennas, check out the FCC consumer guide on antennas and digital television.
You do not need to rescan if you are a subscriber to cable or satellite TV. Your provider will update your local channels for you.
Some local TV stations across the country changed their over-the-air broadcast frequencies from 2018-2020 as part of a plan to open airwaves for new high-speed wireless services. If this occurred where you live, the actual channel number on your TV would not have changed. However, you would need to rescan to ensure your TV continues to receive that channel. Except in rare circumstances, no new equipment or services are required.
Rescanning with Your Remote Control
The terminology for rescanning differs somewhat across manufacturers. Rescanning may also be referred to as auto-tuning, channel set-up, channel scan, channel search, auto-scan, auto-program, or other terminology, depending on your TV make and model. Instructions are similar for most remote controls. While the terminology may differ, the process for rescanning is fairly simple.
Consult your TV or converter box owner's manual, or visit the manufacturer's website, for instructions and customer service contact information. The following chart provides step-by-step instructions for several television brands.
TV BRAND |
STEP-BY-STEP INSTRUCTIONS |
---|---|
Click the "Menu" button. |
|
Click the "Menu" button. |
|
Click the "Menu" button. |
|
Click the "Home" button. |
|
Click the "Menu" button. |
|
Click the "Home" button. |
|
Click the "Menu" button. |
|
Click the "Quick Setup Menu" button. |
|
Click the "Menu" button. |
|
Press the "Menu" button. |
For brands not listed in the chart, instructions are often similar and typically include these steps:
- Press "set-up" or "menu" on the TV remote control or converter box.
- Select "channels," "antenna," or other similar terminology.
- Click "scan," "auto-tune," "channel search," "auto-program," or other similar terminology.
- The TV will do the rest. The process usually takes just a few minutes.
Printable Version
- Print This Guide (pdf)
Alternate Format Requests
People with print disabilities may request braille, large print, or screen-reader friendly versions of this article via the email form at [email protected]. For audio and other access, use the "Explore Accessibility Options" link.
Consumer Help Center
Learn about consumer issues - visit the FCC's Consumer Help Center at fcc.gov/consumers
File a Complaint with the FCC
Visit our Consumer Complaint Center at consumercomplaints.fcc.gov to file a complaint or tell us your story.