Jasper Electronics, Inc.

Jasper's Model TC206L-NY is a switching power supply capable of delivering up to 120 Watts of DC power through a single, regulated +24V DC output. It provides full output regulation across changes in AC Line voltage and output load over the full operating temperature range of -34°C to +74°C. Power Factor Correction is provided, reducing peak AC Line input current and the associated stress on wiring. This model has a functional AC input range of 80V AC to 270V AC input and 47 to 63Hz. Model TC206L-NY is designed to be rack mounted in a TEES type PDA #2L, PDA #3L or PDA #4L assembly as commonly found in 332 or 336 style traffic signal control cabinets. Contact us with your requirements today!

Jasper's TC250 Series are designed to meet or exceed the requirements of NEMA TS 2-2016 V03.07, as required for TS-2 Type 1 and TS-2 Type 2 traffic control cabinets that incorporate Bus Interface Units. These units are rack mounted and fully enclosed, providing up to 180 Watts to two regulated DC outputs and a single unregulated AC output, and include a line frequency reference for use in detector racks, load switches and auxiliary components of traffic control cabinets. TC250 modules are convection cooled, with an extended operating temperature range. They're designed for non-redundant “cold pluggable” installation in the end product. Contact us with your traffic control power applications today!

Jasper’s ultra-reliable Rack-Mount Specialty Power Supplies are most commonly used in redundant systems in applications such as nuclear plants, server rooms, security systems, medical applications, and communi­cation systems where the highest quality hot swap power supplies and medical power supplies are required. Select models offer the following features: Single, dual, or individual unit AC (90-264 VAC) or DC input 12-54VDC Redundant Outputs with Choice of Standby Voltages Full Power to 50C Ambient with Derating to 70C 2 to 8 slots, single or mixed output voltages, up to 10,000 Watts total Standard configurations: 19.0″ to 23.0″ widths, 1U to 6U high Custom Performance & Mechanical Modifications Readily Available Hot swap: N+1 Redundant with internal Oring diodes >0.99 line Power Factor Corrected typical at AC 115V High Density Agency approvals (see spec sheets for details) Models can be ruggedized against high shock, vibration, and humidity to meet MIL-STD-810 requirements Contact us today with your requirements! https://lnkd.in/g4XYKuNs

Jasper’s Medical Power Supplies are available from 4.5W-310W, with both fixed and detachable I/O cords options. Standard and Custom configuration Medical IEC Adapters are also available. FEATURES: 90-264 VAC input Output Voltage Options from 5-54 VDC UL/cUL 60601 3rd Edition Certified Desktop 2 & 3 Pin AC input options Efficiency Levels V & VI – CoC Tier 2 – Large selection of standard output connectors Special connectors, colors & cable lengths are all available at standard pricing and low MOQs Please contact us with any further information about your application so we can offer a solution. https://lnkd.in/g2kZVYZq

Jasper’s 350W Compact PCI Power Supplies comply with the industry standard PICMG requirements and are available in AC or DC input. FEATURES ON SELECT CPCI POWER SUPPLY MODELS INCLUDE: • AC/DC: 90-264VAC Input – 175, 200, 250, 300, 350, & 500 Watt Models – 3U & 6U x 8HP • DC/DC: 18-72VDC Input – 175, 200, 250, 300, 350, & 500 Watt Models – 3U & 6U x 8HP • PICMG 2.11 Compliant • Active PFC • UL/CSA, NEMKO/TUV & CE Certified • RoHS Compliant • Current Sharing on 3.3, 5 & +12V Rails • Hot Swap & ORing Diodes N+1 Operation • Standard 47 Pin Output Connector with 38 & 32 Pin Options (Some Models) • Models can be ruggedized against high shock, vibration, and humidity to meet MIL-STD-810 requirements • Customizing To Meet Your System Requirements Is Our Specialty Contact us with your requirements today!

Jasper's Model TC2216-24 is a 19.0” rack mounted, fully enclosed 2-output switching power supply capable delivering up to 175 Watts DC and intended specifically for use in ATC High Voltage (HV) Cabinets. These are designed for non-redundant “cold pluggable” installation in the end product. AC input and PE is via a detachable power cord inlet, and DC output power connections are through a 6-circuit connector, both on the rear of the supply as shown. User accessible line-side input and individual output fuses, as well as condition indicator LEDs, are all visible on the front panel. Front panel test points allow the user to verify output voltage set points. Model TC2216-24 is convection cooled, with an extended operating temperature range. It is designed to be directly interchangeable with 2216-24 modules from other vendors. Contact us with your requirements today!

Jasper's Model 206L is a switching power supply capable of delivering up to 120 Watts of DC power through a single, regulated +24V DC output. It provides full output regulation across changes in AC Line voltage and output load over the full operating temperature range of -34°C to +74°C. Power Factor Correction is provided, reducing peak AC Line input current and the associated stress on wiring. This model has a functional AC input range of 80V AC to 270V AC input and 47 to 63Hz. Model 206L is an open frame design, with the main PCB assembly installed in a grounded sheet metal chassis designed to be rack mounted in a TEES type PDA #2L, PDA #3L or PDA #4L assembly as commonly found in 332 or 336 style traffic signal control cabinets. This unit is directly interchangeable with earlier CalTrans Model 206 linear type power supplies, without requiring cabinet modifications. Contact us with your requirements today!

Jasper’s highly efficient and compact 200-500W Low-Noise (Fanless) Convection / Conduction Cooled Power Supplies are the ideal choice for low-voltage, high-current, high-power density applications including medical equipment, IT, sensitive electronics, and other applications where audible noise and maintenance must be kept to a minimum. Because there are no fans to fail or require periodic cleaning, maintenance is reduced and MTBF is enhanced. These fanless power supplies can also be optionally ruggedized against shock, vibration, and humidity to meet MIL-STDs such as MIL-STD-810 and MIL-STD-167 for military applications. Jasper GPAD-Series supplies, available from 200-500 Watts continuous output power, can be used in either convection cooling or conduction cooling configurations. The factory recommends conduction cooling when used in ambient temperatures over +50°C. All models have a 3 year warranty. Contact us with your requirements today! https://lnkd.in/gV_SviHm

Jasper's Model TC206L-NY is a switching power supply capable of delivering up to 120 Watts of DC power through a single, regulated +24V DC output. It provides full output regulation across changes in AC Line voltage and output load over the full operating temperature range of -34°C to +74°C. Power Factor Correction is provided, reducing peak AC Line input current and the associated stress on wiring. This model has a functional AC input range of 80V AC to 270V AC input and 47 to 63Hz. Model TC206L-NY is designed to be rack mounted in a TEES type PDA #2L, PDA #3L or PDA #4L assembly as commonly found in 332 or 336 style traffic signal control cabinets. Contact us with your requirements today!

Please join us at the 2024 IMSA Forum and Expo at the Irving Convention Center in Irving, Texas July 14-18. We're in Booth 315, ready to show off our Traffic Control Power Supplies for CALTRANS, ATC, and NEMA applications. We looking forward to seeing you there! https://lnkd.in/e23WZNKT