Cameron Bardliving, PhD

Osmolality Monitoring for UF/DF and CEX Capture of mAbs From Mammalian Cell Cultures
The goal of this study was to understand the impact of monitoring osmolality during an Ultrafiltration/Diafiltration (UF/DF) step prior to CEX capture of the monoclonal antibody Rituximab. The process of UF/DF in downstream workflows is essential within the production of biological therapeutics, such as monoclonal antibodies, proteins (e.g. hormones) and nucleic acids. The UF/DF steps can be undertaken… Show more

Osmolality Monitoring for UF/DF and CEX Capture of mAbs From Mammalian Cell Cultures
The goal of this study was to understand the impact of monitoring osmolality during an Ultrafiltration/Diafiltration (UF/DF) step prior to CEX capture of the monoclonal antibody Rituximab. The process of UF/DF in downstream workflows is essential within the production of biological therapeutics, such as monoclonal antibodies, proteins (e.g. hormones) and nucleic acids. The UF/DF steps can be undertaken separately or in combination to prepare the target molecule, including sample cleanup, purification, concentration, buffer exchange, and desalting. Since both pH and conductivity are both standard metrics used in downstream process analytics, they were used as a base to then build a model around osmolality measurements within the process of UF/DF Show less

Bone marrow derived human Mesenchymal Stem Cells (hMSCs) are an attractive candidate for regenerative medicine. However, their harvest can be invasive, painful, and expensive, making it difficult to supply the enormous amount of pure hMSCs needed for future allogeneic therapies. Because of this, a robust method of scaled bioreactor culture must be designed to supply the need for high purity, high density hMSC yields. Here we test a scaled down model of a novel bioreactor consisting of an… Show more

Bone marrow derived human Mesenchymal Stem Cells (hMSCs) are an attractive candidate for regenerative medicine. However, their harvest can be invasive, painful, and expensive, making it difficult to supply the enormous amount of pure hMSCs needed for future allogeneic therapies. Because of this, a robust method of scaled bioreactor culture must be designed to supply the need for high purity, high density hMSC yields. Here we test a scaled down model of a novel bioreactor consisting of an unsubmerged 3D printed Polylactic Acid (PLA) lattice matrix wetted by culture media. The growth matrix is uniform, replicable, and biocompatible, enabling homogenous cell culture in three dimensions. The goal of this study was to prove that hMSCs would culture well in this novel bioreactor design. The system tested resulted in comparable stem cell yields to other cell culture systems using bone marrow derived hMSCs, while maintaining viability (96.54% ±2.82), high purity (>98% expression of combined positive markers), and differentiation potential. Show less

Osmolality testing has several unique and essential applications throughout bioprocessing, and new use cases are constantly emerging. As the field of biologics manufacturing matures, osmometers and other analytical devices must keep up and even offer new options to remain valuable. The osmolality of monoclonal antibody (mAb) formulations is typically determined using freezing point depression or vapor pressure osmometers. The wider use of subcutaneous injections; an injection that requires less… Show more

Osmolality testing has several unique and essential applications throughout bioprocessing, and new use cases are constantly emerging. As the field of biologics manufacturing matures, osmometers and other analytical devices must keep up and even offer new options to remain valuable. The osmolality of monoclonal antibody (mAb) formulations is typically determined using freezing point depression or vapor pressure osmometers. The wider use of subcutaneous injections; an injection that requires less volume but increased concentration to alleviate patient pain and increase patient compliance has led to a trend in increasing mAb concentrations. This higher concentration, however, can pose analytical issues. Due to much higher viscosities being seen in drug formulations; it is critical to have an instrument that will measure concentration with optimal performance. Although freezing point depression osmometers are the gold standard osmometry method, the previously mentioned higher viscosity samples may signify an issue for older technologies. This would have meant the “go-to” method may have been vapor pressure, even though from a usability and data integrity standpoint, this was not preferred. In response to this, Advanced Instruments has developed a new, intelligent freezing point depression technology that is aimed specifically at these hard to measure drug products. Show less

Difficult-to-express (DTE) recombinant proteins such as multi-specific proteins, DTE monoclonal antibodies, and lysosomal enzymes have seen difficulties in manufacturability using Chinese hamster ovary (CHO) cells or other mammalian cells as production platforms. CHO cells are preferably used for recombinant protein production for their ability to secrete human-like recombinant proteins with posttranslational modification, resistance to viral infection, and familiarity with drug regulators… Show more

Difficult-to-express (DTE) recombinant proteins such as multi-specific proteins, DTE monoclonal antibodies, and lysosomal enzymes have seen difficulties in manufacturability using Chinese hamster ovary (CHO) cells or other mammalian cells as production platforms. CHO cells are preferably used for recombinant protein production for their ability to secrete human-like recombinant proteins with posttranslational modification, resistance to viral infection, and familiarity with drug regulators. However, despite huge progress made in engineering CHO cells for high volumetric productivity, DTE proteins like recombinant lysosomal sulfatase represent one of the poorly understood proteins. Furthermore, there is growing interest in the use of microRNA (miRNA) to engineer CHO cells expressing DTE proteins to improve cell performance of relevant bioprocess phenotypes. To our knowledge, no research has been done to improve CHO cell production of DTE recombinant lysosomal sulfatase using miRNA. We identified miR-23a and miR-377 as miRNAs predicted to target SUMF1, an activator of sulfatases, using in silico prediction tools. Transient inhibition of CHO endogenous miR-23a/miR-377 significantly enhanced recombinant sulfatase enzyme-specific activity by ~15–21% compared to scramble without affecting cell growth. Though inhibition of miR-23a/miR-377 had no significant effect on the mRNA and protein levels of SUMF1, overexpression of miR-23a/377 caused ~30% and ~27–29% significant reduction in endogenous SUMF1 protein and mRNA expression levels, respectively. In summary, our data demonstrate the importance of using miRNA to optimize the CHO cell line secreting DTE recombinant lysosomal sulfatase. Show less

Recombinant adeno-associated viral vectors (rAAV) are promising therapies for genetic diseases. Although current platforms for recombinant vector production can generate drug material for pre-clinical and clinical studies, rAAV biomanufacturing will eventually face commercial supply challenges if per cell vector productivity and process scalability are not improved. Because considerable efforts have traditionally focused on optimizing rAAV plasmid design, herein we investigate the impact of… Show more

Recombinant adeno-associated viral vectors (rAAV) are promising therapies for genetic diseases. Although current platforms for recombinant vector production can generate drug material for pre-clinical and clinical studies, rAAV biomanufacturing will eventually face commercial supply challenges if per cell vector productivity and process scalability are not improved. Because considerable efforts have traditionally focused on optimizing rAAV plasmid design, herein we investigate the impact of host cell proteins on vector production to identify proteins that may enhance rAAV yield. Using a rAAV2-GFP-producing Saccharomyces cerevisiae model in combination with the yeast Tet Hughes Collection screening library, we identified 22 gene candidates that improved rAAV DNA replication (rAAV-GFP/18s rDNA ratio) and vector yield (benzonase-resistant rAAV DNA vector genome titer) as high as 6-fold and 15-fold relative to control, respectively. The candidate proteins participate in biological processes such as DNA replication, ribosome biogenesis, and RNA and protein processing. The best five candidates (PRE4, HEM4, TOP2, GPN3, and SDO1) were further screened by generating overexpression mutants in the YPH500 yeast strain. Subsequent clone evaluation was performed to confirm the rAAV-promoting activity of selected candidates under plate-based and bioreactor-controlled fermentation conditions. Digital droplet PCR analysis of cell lysate and AVB resin-purified material confirmed HEM4 and TOP2 overexpression mutants displayed the highest per cell total rAAV DNA productivity (1.6 and 1.7-fold increase over control, respectively) and per cell vector productivity (3 and 4-fold over control, respectively). This evaluation confirmed that overexpression of HEM4 and TOP2 proteins enhanced total and benzonase-resistant rAAV DNA yield. Further studies are needed to understand their mechanism of action and to assess their potential application in molecular strategies for rAAV production. Show less

Insufficient mixing in laminar flow reactors due to diffusion-dominated flow limits their use in applications where narrow residence time distribution (RTD) is required. The aim of this study was to design and characterize a laminar flow (Re 187.7-375.5) tubular reactor for low pH viral inactivation with enhanced radial mixing via the incorporation of curvature and flow inversions. Toward this aim, the reactor described here, Jig in a Box (JIB), was designed with a flow path consisting of… Show more

Insufficient mixing in laminar flow reactors due to diffusion-dominated flow limits their use in applications where narrow residence time distribution (RTD) is required. The aim of this study was to design and characterize a laminar flow (Re 187.7-375.5) tubular reactor for low pH viral inactivation with enhanced radial mixing via the incorporation of curvature and flow inversions. Toward this aim, the reactor described here, Jig in a Box (JIB), was designed with a flow path consisting of alternating 270° turns. The design was optimized by considering the strength of secondary flows characterized by the Dean No., the corresponding secondary flow development length, and the reactor turn lengths. Comprehensive CFD analysis of the reactor centerline velocity profile, cross-sectional velocity, and secondary flow streamlines confirmed enhanced radial mixing due to secondary flows and changes in flow direction. For initial CFD and experimental studies the reactor was limited to a 16.43 m length. Pulse tracer studies for the reactor were computationally simulated and experimentally generated to determine the RTD, RTD variance, and minimum residence time for the tracer fluid elements leaving the reactor, as well as to validate the computational model. The reactor was scaled length wise to increase incubation time and it was observed that as the reactor length increases the RTD variance increases linearly and the dimensionless RTD profile becomes more symmetrical and tighter about the mean residence time. Show less

Recombinant adeno-associated virus (rAAV) vectors are increasingly popular tools for gene therapy applications. Their non-pathogenic status, low inflammatory potential, availability of viral serotypes with different tissue tropisms, and prospective long-lasting gene expression are important attributes that make rAAVs safe and efficient therapeutic options. Over the last three decades, several groups have engineered recombinant AAV-producing platforms, yielding high titers of transducing vector… Show more

Recombinant adeno-associated virus (rAAV) vectors are increasingly popular tools for gene therapy applications. Their non-pathogenic status, low inflammatory potential, availability of viral serotypes with different tissue tropisms, and prospective long-lasting gene expression are important attributes that make rAAVs safe and efficient therapeutic options. Over the last three decades, several groups have engineered recombinant AAV-producing platforms, yielding high titers of transducing vector particles. Current specific productivity yields from different platforms range from 103 to 105 vector genomes (vg) per cell, and there is an ongoing effort to improve vector yields in order to satisfy high product demands required for clinical trials and future commercialization.

Crucial aspects of vector production include the molecular design of the rAAV-producing host cell line along with the design of AAV genes, promoters, and regulatory elements. Appropriately, configuring and balancing the expression of these elements not only contributes toward high productivity, it also improves process robustness and product quality. In this mini-review, the rational design of rAAV-producing expression systems is discussed, with special attention to molecular strategies that contribute to high-yielding, biomanufacturing-amenable rAAV production processes. Details on molecular optimization from four rAAV expression systems are covered: adenovirus, herpesvirus, and baculovirus complementation systems, as well as a recently explored yeast expression system Show less

We designed, built or 3D printed, and screened tubular reactors that minimize axial dispersion to serve as incubation chambers for continuous virus inactivation of biological products. Empirical residence time distribution data were used to derive each tubular design's volume equivalent to a theoretical plate (VETP) values at a various process flow rates. One design, the Jig in a Box (JIB), yielded the lowest VETP, indicating optimal radial mixing and minimal axial dispersion. A minimum… Show more

We designed, built or 3D printed, and screened tubular reactors that minimize axial dispersion to serve as incubation chambers for continuous virus inactivation of biological products. Empirical residence time distribution data were used to derive each tubular design's volume equivalent to a theoretical plate (VETP) values at a various process flow rates. One design, the Jig in a Box (JIB), yielded the lowest VETP, indicating optimal radial mixing and minimal axial dispersion. A minimum residence time (MRT) approach was employed, where the MRT is the minimum time the product spends in the tubular reactor. This incubation time is typically 60 minutes in a batch process. We provide recommendations for combinations of flow rates and device dimensions for operation of the JIB connected in series that will meet a 60‐min MRT. The results show that under a wide range of flow rates and corresponding volumes, it takes 75 ± 3 min for 99% of the product to exit the reactor while meeting the 60‐min MRT criterion and fulfilling the constraint of keeping a differential pressure drop under 5 psi. Under these conditions, the VETP increases slightly from 3 to 5 mL though the number of theoretical plates stays constant at about 1326 ± 88. We also demonstrated that the final design volume was only 6% ± 1% larger than the ideal plug flow volume. Using such a device would enable continuous viral inactivation in a truly continuous process or in the effluent of a batch chromatography column. Viral inactivation studies would be required to validate such a design. © 2017 American Institute of Chemical Engineers Show less

The production of norovirus virus-like particles (NoV VLPs) displaying NY-ESO-1 cancer testis antigen in Pichia pastoris BG11 Mut+ has been enhanced through feed-strategy optimization using a near-infrared bioprocess monitor (RTBio® Bioprocess Monitor, ASL Analytical, Inc.), capable of monitoring and controlling the concentrations of glycerol and methanol in real-time. The production of NoV VLPs displaying NY-ESO-1 in P. pastoris has potential as a novel cancer vaccine platform. Optimization of… Show more

The production of norovirus virus-like particles (NoV VLPs) displaying NY-ESO-1 cancer testis antigen in Pichia pastoris BG11 Mut+ has been enhanced through feed-strategy optimization using a near-infrared bioprocess monitor (RTBio® Bioprocess Monitor, ASL Analytical, Inc.), capable of monitoring and controlling the concentrations of glycerol and methanol in real-time. The production of NoV VLPs displaying NY-ESO-1 in P. pastoris has potential as a novel cancer vaccine platform. Optimization of the growth conditions resulted in an almost two-fold increase in the expression levels in the fermentation supernatant of P. pastoris as compared to the starting conditions. We investigated the effect of methanol concentration, batch phase time, and batch to induction transition on NoV VLP-NY-ESO-1 production. The optimized process included a glycerol transition phase during the first 2 h of induction and a methanol concentration set point of 4 g L−1 during induction. Utilizing the bioprocess monitor to control the glycerol and methanol concentrations during induction resulted in a maximum NoV VP1-NY-ESO-1 yield of 0.85 g L−1. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:518–526, 2016 Show less

BACKGROUND:

Norovirus virus-like particles (NoV VLPs) have recently been explored as potential vaccine platforms due to their ability to produce an effective immune response. Expression of the main structural protein, VP1, leads to formation of self-assembled particles with similar characteristics to the original virus. These NoV VLPs have been expressed in Escherichia coli, yeast and insect cells. Expression in E. coli and insect cells share downstream processing issues due to the… Show more

BACKGROUND:

Norovirus virus-like particles (NoV VLPs) have recently been explored as potential vaccine platforms due to their ability to produce an effective immune response. Expression of the main structural protein, VP1, leads to formation of self-assembled particles with similar characteristics to the original virus. These NoV VLPs have been expressed in Escherichia coli, yeast and insect cells. Expression in E. coli and insect cells share downstream processing issues due to the presence of inclusion bodies or the need for numerous purification steps. NoV VLPs have also been produced in the yeast P. pastoris; however the protein was only expressed intracellularly.
RESULTS:

We have successfully expressed and secreted the VP1 protein in the novel P. pastoris strain, Bg11, using the methanol inducible pJ912 expression vector, containing the cDNA of NoV VP1. Expression of the VP1 protein in Bg11 was carried out in a 1.5 L bioreactor resulting in a total yield of NoV VLPs greater than 0.6 g/L. NoV VLPs obtained from the culture supernatant were purified via ion-exchange chromatography, resulting in particles with a purity over 90%. The average size of the particles after purification was 40 nm. Transmission electron microscopy was used to visualize the morphology of the particles and saliva-binding assay confirmed that the NoV VLPs bind to Histo-Blood Group Antigens (HBGA).
CONCLUSIONS:

In this study we describe the expression and characterization of fully assembled Norovirus virus-like particles obtained from P. pastoris. The particles are similar in size, morphology and binding capacity, as previously described, for the original NoV. Our results detail the successful expression and secretion of VLPs in P. pastoris, improving their candidacy as a vaccine platform. Show less