“A very knowledgeable engineer with a keen work ethic and skill set. ”
Roy May
Blythewood, South Carolina, United States
3K followers
500+ connections
About
General
- People Management
- Agile Project Management
- V-Cycle Software…
Activity
-
Volkswagen-owned Scout Motors Inc. will reveal its first EV concepts in October 👉 https://lnkd.in/d46gihd3 The off-road focused EVs, in both SUV…
Volkswagen-owned Scout Motors Inc. will reveal its first EV concepts in October 👉 https://lnkd.in/d46gihd3 The off-road focused EVs, in both SUV…
Liked by Roy May
-
As a father of two daughters and someone who values grit and determination, this story really resonates with me. There’s something profoundly special…
As a father of two daughters and someone who values grit and determination, this story really resonates with me. There’s something profoundly special…
Liked by Roy May
-
What does it take to do something truly brave, distinctive, and unique these days? Quick story for ya: In the early 1960’s, International…
What does it take to do something truly brave, distinctive, and unique these days? Quick story for ya: In the early 1960’s, International…
Liked by Roy May
Experience
Education
-
Lancaster University
-
BEA1021 Dissertation (85%)
BEA1022 Dynamic Simulation (79%)
BEA1023 Alternative Power Sources (92%)
BEA1025 Race Engine Design Simulation & Analysis (98%) -
-
Activities and Societies: NEC Birmingham, North West Rally Stages
Year 1
YR01021 Automotive Mathematics (92%)
YR01022 Automotive Science (80%)
YR01024 Automotive Powertrain Fundamentals (84%)
YR01025 Automotive Composites (90%)
Year 2
FD1021 Engineering Mathematics 1 (85%)
BFC401 Academic and Digital Literacies (88%)
FD1022 Computer Aided Engineering and Design (97.5%)
FD1023 Vehicle Aerodynamics (88%)
FD1024 Engine Technologies and Development (76%)
FD1025 Chassis Performance Testing (88%)
Year…Year 1
YR01021 Automotive Mathematics (92%)
YR01022 Automotive Science (80%)
YR01024 Automotive Powertrain Fundamentals (84%)
YR01025 Automotive Composites (90%)
Year 2
FD1021 Engineering Mathematics 1 (85%)
BFC401 Academic and Digital Literacies (88%)
FD1022 Computer Aided Engineering and Design (97.5%)
FD1023 Vehicle Aerodynamics (88%)
FD1024 Engine Technologies and Development (76%)
FD1025 Chassis Performance Testing (88%)
Year 3
FD2021 Engineering Mathematics 2 (79%)
BFC501 Work Based and Placement Learning (88%)
FD2022 Major Project (90%)
FD2025 Race Engine Design Analysis (75)
FD2026 Race Vehicle Dynamics and Data Logging (82%) -
-
-
-
Licenses & Certifications
Projects
-
Alternative Power Sources
-
This paper focused on the impacts of fuel consumption by light-duty internal combustion engines (ICE); it explorers the influences on economic prosperity, national security, and the global environment.
-
Application of Magnetorheological fluid in an Automotive Shock Absorber
-
This paper compiles the fundamental science behind Magnetorheological dampers and their application in the Automotive Industry. The first few chapters cover the history and basic operating principles of MR dampers; it delves further into smart fluids and their states, MR damper augmentations and control methods, mathematical modelling of the control strategies, pulse width modulation and finally a comparative simulation of semi-active and passive suspension systems in MATLAB/Simulink.
The…This paper compiles the fundamental science behind Magnetorheological dampers and their application in the Automotive Industry. The first few chapters cover the history and basic operating principles of MR dampers; it delves further into smart fluids and their states, MR damper augmentations and control methods, mathematical modelling of the control strategies, pulse width modulation and finally a comparative simulation of semi-active and passive suspension systems in MATLAB/Simulink.
The paper explores a wide range of disciplines and the complexity involved when designing an MR damper. The comparative simulation proves the potential of smart fluid devices in an automotive situation, and has led to a further interest in designing a real-life MR damper in the future. -
Engine Design Simulation Analysis
-
In this paper the engine of a 1999 Suzuki GSX1300R Hayabusa will be modelled in GT-Suite. The engine will be implemented into a vehicle model and modified with the aim to achieve superior performance. The vehicle model will be based on an Austin Mini Super-Deluxe (Mark 1). This composition of vehicle and engine is common in the modified Mini scene; there are various suppliers of Hayabusa conversion kits i.e. ‘Z Cars Hayabusa Bike Engine Mini Road Kit’.
The Hybridisation and engine…In this paper the engine of a 1999 Suzuki GSX1300R Hayabusa will be modelled in GT-Suite. The engine will be implemented into a vehicle model and modified with the aim to achieve superior performance. The vehicle model will be based on an Austin Mini Super-Deluxe (Mark 1). This composition of vehicle and engine is common in the modified Mini scene; there are various suppliers of Hayabusa conversion kits i.e. ‘Z Cars Hayabusa Bike Engine Mini Road Kit’.
The Hybridisation and engine optimisation of the Hayabusa Mini increased the power: weight ratio to 405.16kW/tonne from 198.27kW/tonne, this equates to a 104.34760679% increase from the standard unmodified vehicle.
Furthermore, additional power gains are available by derestricting the electric motors from their 125kW and 75kW applied limitations through the hybrid control system. The power output of the electric motors is limited to maintain credibility and realism of the build. The electric motors modelled in the hybridisation process are capable of achieving a combined total power output of 280kW, and meanwhile only 200kW is used.
The suspension modifications made produced a set of realistic and theoretical ideal damping conditions for the Austin Mini at the Oulton Park circuit. By doing so, the results generated have an increased level of realism as the suspension system was tailored specifically for the application.
Finally, the aerodynamic modifications made to the vehicle saw a 1295% increase in the applied downforce to the vehicle. The additional downforce assists with the road hold of the vehicle alongside the suspension modifications. As a whole, the modifications made to the vehicle saw a substantial increase in power: weight ratio and road holding.
-
Vehicle Dynamics in MSC Adams
-
In this paper a Reverted Gear mechanism was modelled successfully in MSC Adams and numerically validated. The main focus of this paper was to study the change in angular velocity with respect to the independent gear ratios of each meshing gear set. The Multibody Dynamic study is rather simple; however, it does prove how precise the results are. The study also shows how the gear sets interact with one another in order to produce a change in velocity through a series of gears and shafts.
-
Data Logging and Analysis Suspension Dynamics
-
This paper focused on interpreting information obtained from a test day at Donnington Park using Blackpool and the Fylde colleges Formula Renault. The tasks revolve around real data from the cars on board data logger and task 2 of this assignment will be analysing the data retrieved. The data acquisition at Donnington circuit had errors, although they were rectified through analysis of the data. The time at Donnington was limited due to the high number of students, and the logistics, although…
This paper focused on interpreting information obtained from a test day at Donnington Park using Blackpool and the Fylde colleges Formula Renault. The tasks revolve around real data from the cars on board data logger and task 2 of this assignment will be analysing the data retrieved. The data acquisition at Donnington circuit had errors, although they were rectified through analysis of the data. The time at Donnington was limited due to the high number of students, and the logistics, although the task was primarily to set up a data logging system to allow for data acquisition, which it was successful in. It would have been helpful to have more time to change vehicle settings to understand how the data changes and implement them on the FR2000.
When analysing RPM traces, it is made simpler through overlaying data e.g., Brake pressure, TPS and RPM. When the traces are overlaid, it makes it easier to interpret how the vehicle and driver are performing. An example of overlaid traces can be shown in Figure 18. The RPM and TPS analysis are based on other information acquired e.g. Brake pressure, wheel speed, to remove the guesswork in the analysis, although this is not displayed on the graph’s due to overcrowding.
Honors & Awards
-
BEng (Hons)
Lancaster University
Automotive engineering and technology (motorsport)
Languages
-
English
Native or bilingual proficiency
-
German
Limited working proficiency
-
Spanish
Elementary proficiency
Recommendations received
4 people have recommended Roy
Join now to viewMore activity by Roy
-
As we celebrate Labor Day, we reflect on the hard work and dedication that has always defined our country and continues to drive us forward. America…
As we celebrate Labor Day, we reflect on the hard work and dedication that has always defined our country and continues to drive us forward. America…
Liked by Roy May
-
Last week, Randy Frank, Vice President of Body Systems at Scout Motors, joined top automotive professionals at the Management Briefing Seminars…
Last week, Randy Frank, Vice President of Body Systems at Scout Motors, joined top automotive professionals at the Management Briefing Seminars…
Liked by Roy May
-
Meet Ramin Mirshab, Manager, Product Management Energy Systems, at Scout Motors. When it comes to our Scout Way values, Ramin is all about "Figure…
Meet Ramin Mirshab, Manager, Product Management Energy Systems, at Scout Motors. When it comes to our Scout Way values, Ramin is all about "Figure…
Liked by Roy May
-
#FOREVER a #BENTLEY #BOY! ✌ 6 years since I’ve started my adventure and it’s been my most exciting ride so far! It has started with deep…
#FOREVER a #BENTLEY #BOY! ✌ 6 years since I’ve started my adventure and it’s been my most exciting ride so far! It has started with deep…
Liked by Roy May
-
Scout Motors Inc. is making significant strides in the construction of its new Production Center in Blythewood, South Carolina. The $2 billion…
Scout Motors Inc. is making significant strides in the construction of its new Production Center in Blythewood, South Carolina. The $2 billion…
Liked by Roy May
-
A new Scout is coming. Meet the newest team members to join us as we build can-do connection machines that answer the call to explore, create, and…
A new Scout is coming. Meet the newest team members to join us as we build can-do connection machines that answer the call to explore, create, and…
Liked by Roy May
-
⚡️Excited to share a wonderful surprise I received from my job Scout Motors Inc. today! A package filled with awesome Scout merchandise and a warm…
⚡️Excited to share a wonderful surprise I received from my job Scout Motors Inc. today! A package filled with awesome Scout merchandise and a warm…
Liked by Roy May
-
Thank you Scout Motors Inc. for the surprised present. These came yesterday unexpectedly at my front door and I am grateful! Let's keep pushing…
Thank you Scout Motors Inc. for the surprised present. These came yesterday unexpectedly at my front door and I am grateful! Let's keep pushing…
Liked by Roy May
-
At Scout Motors, we are innovators. We stretch comfort zones and challenge conventional thinking. We continuously bring forward unique ideas that…
At Scout Motors, we are innovators. We stretch comfort zones and challenge conventional thinking. We continuously bring forward unique ideas that…
Liked by Roy May
-
Synergien: Scout Motors setzt auf Energieversorgung von MAN-Energy Solutions. MAN Energy Solutions entwickelt Energielösungen, die unsere…
Synergien: Scout Motors setzt auf Energieversorgung von MAN-Energy Solutions. MAN Energy Solutions entwickelt Energielösungen, die unsere…
Liked by Roy May
-
ElringKlinger to open new Battery Center in the USA 🏭🌎 Our present plants in the US are getting good company: We are going to open a new Group…
ElringKlinger to open new Battery Center in the USA 🏭🌎 Our present plants in the US are getting good company: We are going to open a new Group…
Liked by Roy May
Other similar profiles
Explore collaborative articles
We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.
Explore MoreOthers named Roy May in United States
-
Roy May
-
Roy May
General Manager at GOODBULL BBQ
-
Roy May
Real Estate Agent - Investor Specialist
-
Roy May
Retired Automation Engineer Westinghouse
52 others named Roy May in United States are on LinkedIn
See others named Roy May