Must be willing to drive extensively throughout day
Must Be Willing to work out of town when necessary
Install safety systems, including emergency lighting, back up battery systems and uninterrupted power supplies
Some experience in AC Voltage (Do not need to be a licensed electrician)
Install standalone solar packages (Competent in DC Power)
Bend, run and install rigid conduit and wire pulls.
From ½ Inch Rigid to 2 Inch Rigid conduit
Run Seal Tight and Direct Burial Cable in Oil and Gas Facilities
Terminating and labeling end devices and all PLC panels.
Troubleshoot all low voltage electrical.
Terminate Low Voltage Wiring Neatly in PLC Cabinets
Able to run amp draw calculations
Set up, calibrate, and install wireless transmitters
Set up address and install 4-20 HART Protocol Devices
Set up and install Modbus Protocol devices
Set up, install, and calibrate Vega Guide Wave radars
Must be able to perform false signal suppression, Paramater change and understand circumstances for parameter changes
Set up, install, and program ABB Total Flow systems.
U Flo, XRC, XFC, RMC (all models)
Set up, install, and program Red Lion HMI's.
CR3000, CR1000, G07000 (all Models)
Set up, configuration and installation of Cellular Modems and Free wave, Ubiquiti and Cambium radios.
RV50’s and Microhard Modems
Must have an understanding of radio network and their associated components
Understand and perform Path Study Survey using Computer Programs such as Google Earth, Ubiquiti and Cambium Programs
Understanding of PLC cabinet Devices such as MOXA Serial to Ethernet Converters, HART to Ethernet Converters, Dual Tier Terminal Blocks, Fuses
Must be able to read PID’s and Wiring Diagrams
Install and program Emerson ROC 107 and ROC 800's.
Install, trouble shoot and repair of end devices such as Signal Fire brand pressure transmitters, Guide Wave Vega Radars (Single Chamber and Dual Chamber), Eelctric Level switches, ABB Flow Meters XMV's, ABB XFC's, Turbine Meters, Coriolis Flow Meters, Oleum Tech tank Level Sensors and other end devices.
Competency in wired and non wired end devices
Ability to check/calibrate loops on wired devices
Competency in checking RSSI levels for wireless devices and Modems
Troubleshoot, fix, and improve electrical controls and PLC panels
Firm understanding of electrical Relays (12VDC and 24VDC)
Understanding of wiring battery banks in 12V or 24V fashion