From the course: AutoCAD 2019 Essential Training
Unlock the full course today
Join today to access over 23,200 courses taught by industry experts.
Using Rotate and Scale - AutoCAD Tutorial
From the course: AutoCAD 2019 Essential Training
Using Rotate and Scale
- [Instructor] We're staying in the same drawing, our ModifyingObjects.dwg file, and I've left it in the same state as it was at the end of the previous video, where we did the moving and the copying of the desk, the chair, and the rubber plant to go into our offices there in our floor plan. Now what we're going to have a look at this time is rotate and scale. Now you'll notice, obviously, the chairs are facing the wrong way. They're not facing the desk, so we're going to use rotate to basically make sure that they're facing the right way. And there's two little methods that you can use there that I'm going to show you. We're also going to scale our rubber plant so it's half the size it is now. So we're going to zoom in on the left hand desk and chair. Get in nice and close so that you can see what you're doing. Now what we're going to do is we're going to click on the chair, and you'll notice that the grip for the block is exactly on the midpoint of the back of the chair. Click on…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
-
-
-
-
Selecting objects5m 13s
-
(Locked)
Using Move and Copy3m 21s
-
(Locked)
Using Rotate and Scale4m 52s
-
(Locked)
Creating and using arrays5m 8s
-
(Locked)
Using Offset and Mirror4m 54s
-
(Locked)
Using Stretch and Lengthen3m 30s
-
(Locked)
Using Trim and Extend6m 31s
-
(Locked)
Using Break and Join4m 52s
-
(Locked)
Using grips and grip editing3m 27s
-
(Locked)
Using boundaries3m 52s
-
(Locked)
Using Fillet and Chamfer6m 37s
-
(Locked)
Using Divide and Measure6m 47s
-
(Locked)
Editing polylines and splines6m 1s
-
-
-
-
-
-
-
-
-
-
-
-
-