From the course: AutoCAD 2019 Essential Training
Unlock the full course today
Join today to access over 23,200 courses taught by industry experts.
Using Stretch and Lengthen - AutoCAD Tutorial
From the course: AutoCAD 2019 Essential Training
Using Stretch and Lengthen
- [Instructor] We're staying in the ModifyingObjects dot dwg file, and we're going to look now at another two commands that are very useful when you're modifying your AutoCad drawings, and they are the Stretch command and the Lengthen command. Now you'll notice, I have left the drawing this time in the same state as it was at the end of the last video. That's because we're going to work on these wall here that we've created previously in the previous video. Just pan upward slightly by holding down the wheel on the mouse and moving upward slightly with the mouse. You want to be able to see these lines here that form the wall, and what we're going to do is we're going to stretch and lengthen our internal walls here, these two that we've created, by about a meter and a half, in order to create a new corridor that runs along this bottom wall here. So let's have a look at how that works. Let's use the Stretch command first. Now the Stretch command is up on the Modify panel, on the Home tab…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
-
-
-
-
Selecting objects5m 13s
-
(Locked)
Using Move and Copy3m 21s
-
(Locked)
Using Rotate and Scale4m 52s
-
(Locked)
Creating and using arrays5m 8s
-
(Locked)
Using Offset and Mirror4m 54s
-
(Locked)
Using Stretch and Lengthen3m 30s
-
(Locked)
Using Trim and Extend6m 31s
-
(Locked)
Using Break and Join4m 52s
-
(Locked)
Using grips and grip editing3m 27s
-
(Locked)
Using boundaries3m 52s
-
(Locked)
Using Fillet and Chamfer6m 37s
-
(Locked)
Using Divide and Measure6m 47s
-
(Locked)
Editing polylines and splines6m 1s
-
-
-
-
-
-
-
-
-
-
-
-
-