From the course: Autodesk Nastran In-CAD: Dynamic Analysis
Unlock the full course today
Join today to access over 23,200 courses taught by industry experts.
Transient analysis example - Nastran In-CAD Tutorial
From the course: Autodesk Nastran In-CAD: Dynamic Analysis
Transient analysis example
- [Instructor] In this video, we're going to look at the complete setup of a transient analysis. I'm going to open up a part. We got the exercise file and it's plate modes. And once the part is open, I'm going to save it off, ready for a Nastran run. So I'm going to save it in the directory and the name where I want the Nastran files to be. So I'm navigating to a work area. I'm calling this plate modal transient. Now we're going to the environments, going toward our Nastran in CAD. We're into the modal tree, and this is already set up as a normal modes analysis. We've run through this a couple of times using this particular example. So let's start to change it. Let's edit it, and change it from a normal modes analysis into a modal transient response. Now we want accelerations out as well as displacements. They now have meaning in a transient analysis. Now we're going to go to the dynamic setup. Now the time step, we calculated in the theory section. That is sufficient fidelity in…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
(Locked)
Background to transient analysis3m 22s
-
(Locked)
Transient analysis example4m 24s
-
(Locked)
Control transient analysis3m 35s
-
(Locked)
Modal transient response analysis3m 33s
-
(Locked)
Direct transient response analysis2m 56s
-
(Locked)
Base motion in dynamic response5m 36s
-
(Locked)
Base motion example5m 13s
-
(Locked)
-
-