From the course: Fusion 360: Simulation
Unlock the full course today
Join today to access over 23,100 courses taught by industry experts.
Review the electronic cooling results - Fusion 360 Tutorial
From the course: Fusion 360: Simulation
Review the electronic cooling results
- In a previous exercise we launched two cloud based solutions for an electronic cooling study, now those results are back so we'll close the window. For electronic cooling, the results are a little different we'll explore the results and it will load the results for the second study. After a few moments, you'll see a gradient appear on the right with a range with low risk and high risk for our range of interest. It appears that there are two bodies that are over the critical temperature in this analysis. We can use a few different results, analysis tools such as section analysis, picking a plane and it will show us the cooling through that plane. If we relocate the plane, we can see that clearly this IC has excessive heat at three Watts. We should double check our values and see if they're the correct but we can also take a look at the temperature scale bringing the temperature scale down,…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
(Locked)
Applying static loads to a design to search for nonlinear material behavior4m 16s
-
(Locked)
Set up an analysis of an event over time7m 4s
-
(Locked)
Predict the risk of structural buckling1m 48s
-
(Locked)
Use simulation to guide a change to the topology of the design7m 11s
-
(Locked)
Analyze how air flow can contribute to cooling electronics7m 35s
-
(Locked)
Review the electronic cooling results2m 19s
-
(Locked)
-