From the course: Fusion 360: Simulation
Unlock the full course today
Join today to access over 23,100 courses taught by industry experts.
Review the results - Fusion 360 Tutorial
From the course: Fusion 360: Simulation
Review the results
- [Instructor] If you didn't complete the previous lesson, you'll want to review the steps involved with refreshing the results for this design. Now let's take a look at some of the tools that can be used to review the results. We'll begin in the lower right. The Results Details will give you the minimum safety factor, it will allow you to make some modifications, such as showing the deformation scale, you can also close this dialog or choose not to have it shown automatically when results are complete. Below that is the Legend. In the Legend, you can select which load case you're reviewing. In this case, we only have one. You can choose what you're reviewing. Right now we're seeing the safety factor. And we can even adjust what's visible on the component to zone in on a portion of the safety factor, only showing the worst part or just looking at a portion of the legend. Using the pull down menu, changing to stress…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.