The tap should be ½-13. You selected ½-20. I don't know if you will notice this later, but you go through a lengthy discussion about making sure you have the correct tools, when you don't. This is probably a common mistake that must be watched carefully. You will be selecting a drill later, hopefully you will notice the error then.
SOLIDWORKS: Integrated CAM with HSMXpress
With Gabriel Corbett
Liked by 716 users
Duration: 2h 32m
Skill level: Beginner + Intermediate
Released: 1/25/2018
Course details
Autodesk HSMXpress software brings integrated CAM to SOLIDWORKS. In this course, discover how to get started with this 2.5 axis CAM plugin. Gabriel Corbett walks through how to load models; set up a machine and fixtures; configure tools; and drill, tap, bore, pocket, and mill your material. He also shows how to generate toolpaths, simulate a job, use the utilities in HSM, and more.
Skills you’ll gain
Earn a sharable certificate
Share what you’ve learned, and be a standout professional in your desired industry with a certificate showcasing your knowledge gained from the course.
LinkedIn Learning
Certificate of Completion
-
Showcase on your LinkedIn profile under “Licenses and Certificate” section
-
Download or print out as PDF to share with others
-
Share as image online to demonstrate your skill
Meet the instructor
Learner reviews
-
-
Curtis Workman
Curtis Workman
No Blockchain/Bitcoin-Mechanical Engineering, Machine Shop Technician and Instructor at University of Houston-Clear Lake
Contents
What’s included
- Practice while you learn 1 exercise file
- Learn on the go Access on tablet and phone