ASM International’s Post

 Cover Page, JMCA on "A comprehensive review on advanced supercapacitors based on transition metal tellurides: from material engineering to device fabrication": https://lnkd.in/gJF_ssbZ

With direct immersion, a wide range of components beyond the battery are in direct contact with the fluid. If the battery pack, other electrical components and other hardware assemblies are directly immersed in a dielectric fluid, how do various fluids interact with these various materials? Lubrizol’s Andrew Richenderfer shares results of research into material compatibility considerations with direct immersion. Read the article here: https://lnkd.in/gxNfT8HE

If you are interested in corrosion studies and metal additive manufacturing, do not miss this webinar on Corrosion Performance of Additively Manufactured Metals on May 21st, co-organized by the European Federation of Corrosion and the research group Electrochemical and Surface engineering of the Vrije Universiteit Brussel (VUB). We have an interesting full day program with experts in the field. You can choose the session that interests you the most, or follow them all!

Join us next month for a webinar with our friends at CompositesWorld. Our application specialists will be discussing the different methods for measuring strain when testing composite materials, the advantages and disadvantages of each, and when you might prefer one method over another. Register here: https://hubs.li/Q02r24bl0

Polymers are prone to deform slowly over long periods of time when subjected to applied load, a phenomenon known as creep. Over time, the deformation can grow so large that a polymeric part of a device or system no longer functions as intended, leading to product and material failures. Creep testing can assess creep performance and can also be used for material comparisons in selecting the right material for an application. At Veryst Engineering LLC, we perform both standardized and customized creep testing. To learn more about how our creep testing capabilities can help you, view our Veryst case studies: https://lnkd.in/eZ6ZSP6M

This is a CALL FOR PAPERS for the 71st Technical Conference & Expo, to be hosted by the Investment Casting Institute at the Baird Center in Milwaukee, Wisconsin, October 20 - 23, 2024. To be considered for this year’s Technical Conference, papers should adhere to the following criteria: • The paper must be technical in nature and not a sales pitch. (Commercialism of any kind will not be accepted). • The paper should represent a collaboration with or data from a foundry where the topic of discussion has been applied. • Co-present with or reference to a foundry by name in your paper and presentation is required. Abstracts are due no later than February 1, 2024. Papers should address technical advancements, cost reduction, improved quality or continuous improvement techniques that enhance competitiveness. Of greatest interest are technologies and methods that will have an immediate impact on a foundry operation or that will make casting manufacturers more competitive. The ICI also seeks papers from suppliers for the “How It’s Made” category. Foundry collaboration on “How It’s Made” presentations are not required. All papers should be prepared and presented in English. For details, visit Technical Paper Guidelines Technical Paper Guidelines - https://lnkd.in/eXBdE9pv... Abstracts should be sent to the attention of Nora D’Ambra at [email protected]

The ability to digitally predict fatigue can save a ton of time and money in the development and qualification of materials. If you deal with fatigue at all in your work, I highly recommend this webinar. Gary is a expert in computational modeling of fatigue.

As engineers we are always looking for ways to innovate and improve. I'm thrilled to share with you our recent patents on novel geometries that can efficiently transport heat and/or mass. Our Triply Periodic Minimal Surfaces ("TPMS") based reactors and heat exchangers offer a wide range of benefits including increased efficiency, compactness, lower capital cost, and reduced energy use. These structures feature continuously turning flow paths and a large surface area to volume ratio resulting in significant improvements in heat and mass transfer. We also found a superset of these surfaces, called periodic nodal surfaces (PNS), that can offer the same benefits as TPMS, with less restriction on the geometric features. Check out our patents for more information on how TPMS/PNS structures can revolutionize energy and chemical processing applications. https://lnkd.in/gUQG9xBz https://lnkd.in/gXxy6a-E

QuesTek webinars are the perfect way to learn more about how our engineers transform the world of materials engineering. Register to join us this Thursday!

[PDF] The Science and Engineering of Materials: Solutions Manual Donald R. Askeland (auth.) digsell https://lnkd.in/dt2jkQ_V This solutions manual accompanies the SI edition of “The Science and Engineering of Materials”, which emphasizes current materials testing, procedures and selection, and makes use of class-tested examples and practice problems. https://lnkd.in/dtD2JDV7