CK Supply’s Post

Transcript

What's up everybody, Taylor White here with CK Supply. Thanks for joining in on another one of our welding videos today we're going to talk about pleasers lazers, right? So we have back here in the tech center in our nice as you see the laser enclosure, the Denali Weld 200 CR. It is a water water pool unit with the wire feeder. This package is pretty awesome. So #1 about the Noli well Bear Chicago, IL based company, so design manufactured in Chicago components from all over the world. So we got Germany, Australia, China, you know every little piece that they needed to get they they acquire and it really transfers that value and the price tag of this unit. So #1 this is a 2000 Y unit, so we can Weld up to three sixteenths, maybe 1/4 inch. It's it starts to push it at about 1/4 inch. But they do have these larger units coming out so we can, well, they're good material. We can go up to half inch with the 4000 Watt series, so they say. So today we are going to do a little sample of aluminum. I have some 4043 wire in here. We have nitrogen on the gas. Our flow rates are set about 35 CFH and we are using nitrogen because Blazers like nitrogen pleasers, right which we queue that in every time we say lazers. Uh, so yeah. So we were to turn everything on here it. Pretty space age. I'll tell you what, you turn this guy. Emergency stops. And get the nice little flashing lights. It's pretty cool. So I'm going to get my safety here on so for safety of your eyes. And as all the windows look green, everything is. Tailored to the frequency of the laser itself. So laser 6 plus glasses for the frequency of the laser coming out. You cannot see laser. Light itself can't see the laser beam, so we have to be conscious. We don't point it at anybody. Be careful about maybe it reflecting off of the surface. So there's a lot of things you go into when you talk about lasers and safety. And we have a plethora of information on that. Everybody's curious, but main thing is we treat it like something that can burn a hole in something else, right? Just be careful and, and we have a lot of fun we do. So I'm going to go ahead and I'm gonna put everything on. And we're going to do some well samples and check them out. A lot of safety features on this machine, so when you come in you get a screen. As such, and everything is locked out right now. So to undo this, there we go. O anytime an emergency, emergency buttons hit and there's another one located. On this. Gun itself, so double emergency stop. So we're trying to make this as safe as possible. Yeah, lasers have enough power to Weld metal, so they have enough power to potentially hurt somebody. So we have to be careful. So we're not dealing with anything super thick. So I don't need 2000 watts. Let's say I'm going to go, let's try 1600. So I'm going to put 1600 watts in. Laser frequency, I don't need super penetration in there, so. Let's say. Umm, let's say for five. We'll try. And then Robert frequency, let's put that to 60. So the wobble frequency is just because it's going to be in a straight line. So it's just how fast it's going to go back and forth. And the laser frequency is the intensity of the laser itself. So higher frequency, more penetration, more agitation wobble frequency, the slower it is, the more heat you're going to have. So you know, we have to fine tune certain things and then the width. Of this is only allowed to be 1mm thicker than the wire you have. So I have 1.2mm in there, so I'm going to go 2.2. Make it the best it can be um, your laser is now on with that laser switch, but. It will not turn on unless this is released because this is some you know, when you put it in the stand, it actually got hit. So it flashes. Now it's ready. We come here. You can hit laser switch on. Great. One other thing we don't want to forget is. In our settings, we have to make sure that the wobble switch is on. This is actually going to make the laser move around. That doesn't move around. You're going to have a problem. And fans are kicking on, so it's getting a little louder. Umm, so. Everything looks good to me. I think this is a good starting point for us. But the gas through there, make sure it's fresh. And. Yeah. I think we get the weather. Yeah, my little restart, but ignore that. Truly, truly. Pretty amazing. I mean you don't get these kind of results. Would take and you don't get it nearly that fast. So yeah guys, that is the end of our little laser welding demo with the Denali CR 2002 thousand Watt laser welder. This welder also has a cleaning action and laser cleaning. So we can do steam cleaning or we can do the larger cleaning area with different attachments. So we'll do another video with that show everybody that one because everybody likes seeing that one. It's pretty cool if you're interested. And checking out this unit, we have this one here in the tech Center downtown Saint Louis off Manchester. And we also have the air cooled jet system on the showroom floor there. So if you guys want to know availability, pricing or anything like that, give us a call. And if you enjoyed this video, go ahead and give us a like give us subscribe, follow and stay tuned for the next one. We'll catch you guys around. Thanks.