C&M Environmental Technologies Inc.’s Post

BOQU ISWAS Online Silicate Sodium and Industrial Phosphate Analyzer Video Website: https://lnkd.in/e3VVTCs STEAM & WATER ANALYSIS SYSTEM are used in power plants and in those industrial processes where it is needed to CONTROL AND MONITOR WATER QUALITY. In power plants it is needed to control the water/steam cycle characteristics in order to avoid damage to the components of the circuit as the steam turbine and the boilers. #waterqualitymeter #waterqualityanalyzer #onlinesilicatemeter #onlinephosphateanalyzer #phosphateanalyzer

Treatment for boiler feedwater is crucial for maintaining the efficiency and longevity of boiler systems. Without proper treatment, boiler feedwater can contain impurities such as dissolved minerals, suspended solids, organic matter, and gases, which can lead to corrosion, scale formation, and fouling within the boiler. By effectively treating boiler feedwater, operators can minimize the risk of equipment damage, improve energy efficiency, and prolong the operational life of the boiler system, ensuring reliable and cost-effective steam generation for various industrial applications. Learn more: https://hubs.la/Q02tZgVV0

Plugged and fouled diffusers operating in thickened sludge is commonplace. BioMix compressed gas mixing eliminates plugging and fouling, ensuring maintenance free operation.

Partial Gas Recycle (PGR) recirculates the majority of the #dryer exhaust stream back to the air heater as a preheated #drying medium. Since the bleed-off stream contains high-humidity, a Gas Heated #Evaporator (GHE) may be integrated to recover the #energy for liquid concentration of a separate stream in the plant's operations. Dedert's GHE is designed for particulate-removal and stream saturation to maximize the evaporator's performance, while also eliminating the need for a wet scrubber for the dryer bleed-off stream and reducing the RTO size for a smaller vent stream. www.dedert.com #energyconservation #heatrecovery #energyconsultant #energyengineering #engineering #engineeringinnovation #technologyinnovation #technologyintegration #innovativetechnology #dewatering #evaporation #worldofengineering #industrialengineering

One of the challenges I'm faced with is to improve steam tracing within the plant, the product is vapor tar with mixture of volatile organic compound that keeps on blocking my VOC lines. My dry saturated steam is maintained at the certain temperature throughout the steam tracing, cladding is done correctly however from time to time theres condensation in the VOC lines that increases the LEL (low explosive limit) of the gas and unable to operate the Regenerative Thermal Oxidazer system to oxidize the collected VOC from the line before we realize them into the atmosphere. I have been applying a purging system with a steam blowing the lines but that takes time to resolve the blockage meaning from time to time I must stop the RTO and start purging my lines again, that's not productive at all. How can I improve my plant from continously condensation that result in blockage of the VOC line, take note I'm sucking the gas or voc with a drive system from various tanks in the plants ? #anysuggestions

This desalination process dominates 𝟴𝟬% of the market. . . We know we can't use seawater directly. But, With the right approach, we can turn it into potable water. One depends on 𝗽𝗼𝘄𝗲𝗿 sources. It is a membrane process. Say : - Reverse Osmosis (RO) - Electrodialysis (ED) While other depend on 𝗵𝗲𝗮𝘁 sources, It is a distillation process, Say : - Multistage Flash (MSF). - Horizontal Tube Evaporator (HTE). But this one has exceptions. Yes, Vapor compression distillation (VC) involves distillation. But mainly, it uses mechanical energy (power) to compress vapour. Here is an interesting fact: Yes, these 2 dominate the market now, - Membrane process: 𝟴𝟬% (approx.) - Distillation process: 𝟐𝟎% (approx.) The choice depends on -cost -practical needs. - - - Senthilkumaran Chinnadurai #desalination #Membrane #Water

CALYDENS® 8000 provides Homogeneous Dense Loading for very large reactors up to 8000mm of diameter. Its diaphragms system allows to get a flat and uniform bed whether it is loading catalyst, adsorbent or ceramic balls. Do not hesitate to talk to your CREALYST-Oil contact about all your catalyst loading needs! #oil #future #energy #catalysts #refineryoperations #optimization

Does the type of subslab soil gas probe or sampling technique matter for #vaporintrusion site management decision? Maybe not. A paper by EPA and others (including #OurJacobs). Zimmerman et al., "The Representativeness of Subslab Soil Gas Collection as Effected by Probe Construction and Sampling Methods," GWMR, June 2024, https://lnkd.in/eeQDrK5u.

An oil water separator and oil skimmer, the SAS (Separate and Skim) Tank is a complete oil removal solution for industrial process water and wastewater applications. SAS Tanks are designed and engineered for each application, taking into consideration the flow rate, temperature of the oil/water, type of oil to be removed, and available floor space, among other variables. Learn more about this solution 👇 👇 https://lnkd.in/eKQt3Sgn

Post : 92 𝚄𝙿𝙳𝙰𝚃𝙴 𝚈𝙾𝚄𝚁 𝙾𝙸𝙻 𝙼𝙸𝚂𝚃 𝙻𝚄𝙱𝚁𝙸𝙲𝙰𝚃𝙸𝙾𝙽 𝙺𝙽𝙾𝚆𝙻𝙴𝙳𝙶𝙴... All the Below Contents include in this Document..... • Oil mist is easily controlled and applied, • Environmental and health concerns addressed, • Header temperature and size, • Dry-sump (“pure mist”) vs. wet-sump (“purge mist”) ap￾plications revisited, • Experience with modern oil mist systems, • Concluding comments, #oilmistlubrication #lubricants #oilandgas #hydrocarbonprocessing